Hi,
I have lg g2 with cm10.2 stable version, for the last 5 nites I tried to update to cm11 and failed. Please help with what I am doing wrong. I followed all procedures step by step but no go.
Thanks,
Kevin
newman93004 said:
Hi,
I have lg g2 with cm10.2 stable version, for the last 5 nites I tried to update to cm11 and failed. Please help with what I am doing wrong. I followed all procedures step by step but no go.
Thanks,
Kevin
Click to expand...
Click to collapse
Hey man if you know all the steps and it fails maybe try Philz cwm recovery in Original android development thread....a lot ppl having success with it....
First time installing CyanogenMod 11 to your LG G2 (D802), or coming from another ROM:
- Read the official wiki
- Copy GApps and CM11 ZIPs to your SDCard
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash CM11 zip from SDCard
- Flash GApps zip from SDCard
- Reboot
- Don't restore system data using Titanium Backup!
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!
Upgrading from earlier version of CyanogenMod 10.2:
- Copy CM11 ZIP to your SDCard
- Boot into Recovery
- Flash CM11 zip from SDCard
- Reboot
I update from cm10.2 and had much errors.
I think the best is a first time installation
Sent from my LG-D802 using xda app-developers app
newman93004 said:
Hi,
I have lg g2 with cm10.2 stable version, for the last 5 nites I tried to update to cm11 and failed. Please help with what I am doing wrong. I followed all procedures step by step but no go.
Thanks,
Kevin
Click to expand...
Click to collapse
Kevin, ever get this figured out? I'm using TWRP also and flashed 10.2 with no problems. Tried two of the cm11 nightlies and both of them failed. Any ideas?
newman93004 said:
Hi,
I have lg g2 with cm10.2 stable version, for the last 5 nites I tried to update to cm11 and failed. Please help with what I am doing wrong. I followed all procedures step by step but no go.
Thanks,
Kevin
Click to expand...
Click to collapse
When flashing kit Kat rooms you need the newest recovery. Twrp 2.6.3.4. Should work.
WCM3 said:
Kevin, ever get this figured out? I'm using TWRP also and flashed 10.2 with no problems. Tried two of the cm11 nightlies and both of them failed. Any ideas?
Click to expand...
Click to collapse
Sent from my LG-G2 using XDA Premium 4 mobile app
Related
Hi,
This is the first time I've tried rooting a device so bare with me :good:.
It's taken me a few attempt to get things working on my Defy MB525 I've managed to root it with SuperOneClick and install either CWM 2.5.1.8 or SndInit2.3 (which uses CyanogenDefy Recovery v5.0.3.1). I'm now at a stumbling block where when I try to install a custom ROM on the device I keep getting...
"E:error in /sdcard/*ROM name*.zip
(status 0)
Installation Aborted"
Is there something I'm doing wrong or is it just the recovery programs I'm using?
What's the ROM you are trying to install?
themaker69 said:
What's the ROM you are trying to install?
Click to expand...
Click to collapse
I've tried a few now. The latest 4.4 alpha roms by Quarx, CM10 Android 4.1.2 also by Quarx and MokeeOS 43.1 and all come up with error.
Try to wipe the sdcard.
I'm downloading the file on a different computer as maybe the Antivirus on the work PC is messing it about. Also does the class of SDcard make a difference? It's only a class 4 8GB.
themaker69 said:
Try to wipe the sdcard.
Click to expand...
Click to collapse
Formatting it now.
novakanedj said:
I'm downloading the file on a different computer as maybe the Antivirus on the work PC is messing it about. Also does the class of SDcard make a difference? It's only a class 4 8GB.
Click to expand...
Click to collapse
No, the class has nothing to do. Use recovery to wipe, and not windows.
novakanedj said:
Hi,
This is the first time I've tried rooting a device so bare with me :good:.
It's taken me a few attempt to get things working on my Defy MB525 I've managed to root it with SuperOneClick and install either CWM 2.5.1.8 or SndInit2.3 (which uses CyanogenDefy Recovery v5.0.3.1). I'm now at a stumbling block where when I try to install a custom ROM on the device I keep getting...
"E:error in /sdcard/*ROM name*.zip
(status 0)
Installation Aborted"
Is there something I'm doing wrong or is it just the recovery programs I'm using?
Click to expand...
Click to collapse
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
novakanedj:
From 4.1 to 4.3 I installed using last TWRP. For 4.4 you need to use this.
hotdog125 said:
4.1 should install. 4.3 and 4.4 need a newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Which recovery installs do the newer versions need and is there an install guide for these?
novakanedj said:
Which recovery installs do the newer versions need and is there an install guide for these?
Click to expand...
Click to collapse
For 4.3+ you need to first install 4.1/4.2 first to get the newer recovery.
Sent from my Nexus 7 using Tapatalk
Right I've just managed to get cm-10-20131030-NIGHTLY-mb526.zip to install from Quarx. Will let you know if the install is successful.:good: I would like to eventually install 4.4 KitKat when a more stable release is available.
edit: Succesfully installed . Just got to put Gapps on now.
Just install the zip from SDcard using your current custom recovery.
hotdog125 said:
For 4.3+ you need to first install 4.1/4.2 first to get the newer recovery.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. I noticed that after I flashed with the 4.1.2 Quarx from there was a new bootloader on it. This should make it easier. I had to wipe and start again yesterday because I cocked up the Gapps install. In the end I went with the 30th Oct 2013 build of CM10 by Quarx and got the Gapps from www.goo.im/gapps. All seems to be running fine now and finished setting it up last night.
My girlfriend has a phone she can use now as her old one broke and she didn't want to use the Defy as the data couldn't be switched off on the stock ROM and would cost her a lot on her data plan (500MB a mth). Her Mum got a new contract with a Desire C so the Defy was going spare .
Hello everyone! I am trying 2 days now to flash CM 11 on G2 via TWRP and today via CWM both latest versions with no success any help?
http://www.dropbox.com/s/4clnin9y9xdgt7m/IMG_20131212_222152.jpg
View attachment 2451169
disme547 said:
Hello everyone! I am trying 2 days now to flash CM 11 on G2 via TWRP and today via CWM both latest versions with no success any help?
http://www.dropbox.com/s/4clnin9y9xdgt7m/IMG_20131212_222152.jpg
Click to expand...
Click to collapse
try to download again CM maybe the file isn't complete!
disme547 said:
View attachment 2451169
Click to expand...
Click to collapse
If the file is good maybe try Philz cwm recovery in original android development forum
zevim2005 said:
try to download again CM maybe the file isn't complete!
Click to expand...
Click to collapse
I have downloaded many times! nothing at all...
RubbleTea said:
If the file is good maybe try Philz cwm recovery in original android development forum
Click to expand...
Click to collapse
Yeah!!! thats worked!!!!!!!!! THANK YOU VERY MUCH!! :victory::victory:
Hi guys,
I just want to ask you how could I replace TWRP Recovery with CWM on my LG G2 D802 International?
I have rooted and installed TWRP but I have issue with installing CyanogenMod 10.2 Stable (I checked MD5 and downloaded it many times), as I understand is a problem of TWRP compatibility.
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
DireArcticWolf said:
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
Click to expand...
Click to collapse
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
thanks
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
Thank you sssoooooo much, after a week of pulling my hair out I am happy to say I now have CM11 on my G2.
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Plain Water said:
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
markula78 said:
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
Click to expand...
Click to collapse
I just download the Freegee app ant updatet to 2.6.3.3 and it work, if any other with LG 802 have problems.
Good to know. Thanks for the post.
Sent from my LG-D801 using XDA Premium 4 mobile app
I'm currently running CM11 (02-07) with ART enabled. I'm thinking of upgrading to the current nightly, but I'm not sure if I need any special steps with ART.
I will be flashing the ROM manually because I need to modify the device number, so I'll probably be doing a reset before, which will of course reset back to Dalvik and remove all my apps.
Now my quesion is, can I backup my apps and user data while in ART with Titanium, and then restore them in Dalvik? I'm thinking of keeping Dalvik so I can flash stock remote and camera.
Thanks,
Vic
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
victorbrca said:
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
Click to expand...
Click to collapse
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
AndroidNoobeee said:
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
Click to expand...
Click to collapse
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
victorbrca said:
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
Click to expand...
Click to collapse
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
AndroidNoobeee said:
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
Click to expand...
Click to collapse
How did you flash recovery?
Sent from Tapatalk.
victorbrca said:
How did you flash recovery?
Sent from Tapatalk.
Click to expand...
Click to collapse
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
AndroidNoobeee said:
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
Click to expand...
Click to collapse
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
victorbrca said:
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
Click to expand...
Click to collapse
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
AndroidNoobeee said:
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
Click to expand...
Click to collapse
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
victorbrca said:
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
Click to expand...
Click to collapse
It won't allow me because the thread is only for developers.
Direct download
Download page with all nightlies
For now, there is no network on XT1033.
Do you tested if everything works ?
Eurofighter_ty said:
Do you tested if everything works ?
Click to expand...
Click to collapse
No, not yet
We need XT1033 testers.
I always get stuck at cyanogenmod logo!
Any one else stuck?
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Just wait. It took 5 minutes for the first boot
zpmarcos said:
I always get stuck at cyanogenmod logo!
Any one else stuck?
Click to expand...
Click to collapse
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
ohn42 said:
Just wait. It took 5 minutes for the first boot
Click to expand...
Click to collapse
SaurabhSandav said:
Tried it twice and got stuck at the Logo at both times. I got it working finally after flashing it over cm11.
Click to expand...
Click to collapse
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
zpmarcos said:
what recovery are you guys using?
Can you please tell me the procedure? What should I wipe?
Click to expand...
Click to collapse
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Xt1032, latest twrp, bootloop.
SaurabhSandav said:
I am using TWRP. I just flashed cm11 using the general procedure ( Wiping and flashing the zip ) and then I flashed cm12 over it without wiping the device.
Click to expand...
Click to collapse
what TWRP version? sorry but Im stuck :/
zpmarcos said:
what TWRP version? sorry but Im stuck :/
Click to expand...
Click to collapse
TWRP 2.8.3.0
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
sim card is not working on xt1033 but hotspot is working
any working recovery for moto g gpe 5.0.1..? so that we can try this this rom..
ohn42 said:
I have copied the zip into cmupdater-folder and updated via Update-function in CM11. After rebooting (need to wait 5 minutes) you need to install 5.0 gapps (I used PA pico).
works fine so far
Click to expand...
Click to collapse
Thank you sir, you are the man!
Worked for me after 3 hours trying hahaha
I can't flash it error in TWRP E: can't mount /system. Any solution??
Is dual sim working or not
Tap-a-talked from the MOTOG
Flashed with philz,works like a charm,stablest ROM for moto g.
xt1033 sim card not working
I tested the cm12 official version for xt1033.The sim card is not working ...If anyone else flashed it and its working please post a reply....