Database Users

[RESOLVED][Q] error when try install ClockWorkMod Recovery v6.0.4.4.

hello guys,
I tried to install ClockWorkMod Recovery v6.0.4.4. on my GT-I9505 But during installation the following error appeared in Odin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after that it no longer starts.
just enter in download mode and the following message appears!
firmware upgrade encountered an issue. please select recovery mode in kies and try again
How should I proceed? I think it does not protrude "write"
what has been tried!
Recovery whit kies
to install by odin stock rom (downloaded on sammobile)
to instal again ClockWorkMod Recovery
both without success
Thanks in advance!
(sorry by my google english)

- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE

the same error in odin
Joku1981 said:
- Take a look for more info: HERE
- Link for download the file for flash it with ODIN: HERE
Click to expand...
Click to collapse
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5

peuzenhu said:
the same error in odin,
the same happened again
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
PDA in file philz_touch_6.08.9-jfltexx.tar.md5
Click to expand...
Click to collapse
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC

another PC
in the first post I was in my house.
but now I'm at work, not just another port but too as other machine.
=x
edit
I tried once more
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltexx.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
something changed?

Joku1981 said:
Flash same file (philz_touch_6.08.9-jfltexx.tar.md5) in Odin but in other USB Port of ur PC
Click to expand...
Click to collapse
I do not believe, I tried on a computer with windows XP. And surprisingly it worked!
Thanks Joku1981

[Q] OTA update samsung missed

Hello,
I have a GT-I9505 which was under 4.3
I did the update OTA 4.4.2 and redemarage bootloop
impossible to get to recovery I left a red message at the top: moviNAND Checksum Confirmation Fail
I try to flash via odin with the latest firmware 4.4.2 XEF and here the result:
Enter CS for MD5 ..
Check MD5 .. Do not unplug the cable ..
Please wait ..
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully ..
Leave CS ..
Added!
Odin v.3 engine (ID: 5) ..
File analysis ..
SetupConnection ..
Initialzation ..
Get PIT for mapping ..
There is no PIT partition.
All threads completed. (succeed 0 / failed 1)
Do you have any ideas?

Download and unzip this file: HERE and flash it like in the pic attached (+ the stock firmware u downloaded). Reboot manually then.

OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result

chtiti said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result
Click to expand...
Click to collapse
if you use single tar file do not check re-partition option
open odin use default auto-reboot and F.reset time only

OTA update samsung missed
Hello,
same result.

Run as administrator (Right click on the icon)
Use Odin 3.07
If that doesn't work then download a 4.3 file and flash that onto the device.

OTA update samsung missed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/006> Added!!

OTA update samsung missed
Do you think the JTAG can solve my problem?

Did you try basic stuff like:
A different usb cable
A different usb port
A different pc?
You are not running Odin on a virtual machine are you?
Did you try redownloading the firmware? Did you try other firmwares?

OTA update samsung missed
I tried everything! Nothing works!

Did you try flashing a custom recovery and then try to flash a custom rom from there?

OTA update samsung missed
re,
How do I flash a custom rom without access to recovery?

OTA update samsung missed
The S4 has gone on a JTAG date.

Told you please uncheck re-partition option...you use single file
Sent from my GT-I9500

chtiti said:
re,
How do I flash a custom rom without access to recovery?
Click to expand...
Click to collapse
Can't you reflash the recovery?

S4 bricked

Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.

Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Install Kies start it and connect the phone to the pc by the stock USB cable, it should detect the phone and offer you to repair it.

Altorn91 said:
Hello guys , I'm stuck in this situation . I counter that is passed by one, there is no recovery installed and are completely blocked . I do not know that firmware mounted on first . You help me ? I have attached pictures.
With Odin:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505YXXGNH2_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I tried different firmware but nothing.
Click to expand...
Click to collapse
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail

MAX 404 said:
Hi mate,
Easiest way out is to reflash stock rom again ( i can see your knox bit is set already) follow this guide
http://forum.xda-developers.com/showthread.php?t=2265477
There you can find PIT files for your phone , flash same type of rom you had or newer , older stock roms will fail
Click to expand...
Click to collapse
I solved using a different cable.

Altorn91 said:
I solved using a different cable.
Click to expand...
Click to collapse
Great news mate

help nedeed with PIT

Help?
What should I do?
This is first time to have this problem?
I have no idea how to fix it..

Similar problem
I have a problem with PIT file during the flashing of custom Rom with Odin.
I had custom ROM (lineage-15.1-20180808-UNOFFICIAL-trlte) and i tried to flash stock Rom; the procedure failed.
When i start the phone i have the errore " firmware upgrade encountered an issue please select recovery mode in kies and try again"; now i cant' go in recovery mode but only in download mode.
If i try to flash the stock rom i have this problem :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3334 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)"
What can i do?
Thank you

Google and Youtube..
I suppose that no one knows or its complicated to explains..

SM-G935T SAMSUNG S7 EDGE BOOT Root failed need help

welp i messed u[p followed this tutorial https://www.tenorshare.com/android-root/how-to-root-samsung-galaxy-s7-or-s7-edge.html
when i did try to install CF Auto Root with odin
odin crash and now my phone fails to boot up properly
i did try to do it again but that has not worked
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 92 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
as i am noob when do these things
any help is ver much needed

i don't want mess up even more so for now i am not doing anything rn with the phone

so i tired to nand erase did not work
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 0 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)

ok! was able to use the book launcher again thankful...here how i fix it https://forum.xda-developers.com/t/root_method_rev_b-11_bootloader_using_combo_firmware.4374741/