Hi. I flashed the 2.6.3.2 version of TWRP. But i can't flash a ROM on that version. I tried to flash the 2.6.3.3 version of TWRP but it fails instantly. I'm not sure what to do. Thanks.
I'm using 3.2 and I've installed Malladus, AOKP and PAC without any problems. 3.3 is broken from what I heard.
What are you trying to flash? I think Cyanogenmod only works with CWM.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.
I was flashing CM11. I will try another ROM and see if that works. Thanks
sean.yesmunt said:
I was flashing CM11. I will try another ROM and see if that works. Thanks
Click to expand...
Click to collapse
Really I'm on 3.3 and its perfect....you should try Philz recovery posted in the Original development forum.....a lot ppl said it works good for the Roms that won't flash
I flashed PAC Man and it worked. I'm actually trying to go over to CWM for gummy ROM but thanks.
Sent from my LG-VS980 using XDA Premium 4 mobile app
You have to find the right recovery image, by that I mean one that works. I had the same issue and I just had to dig a little bit to find a working 2.6.3.3 image. It was cake once I downloaded and flashed it. Good luck.
I used this:
http://forum.xda-developers.com/showthread.php?t=2551415
Related
I flashed a Kit Kat rom, and before I was having problems with recovery. Now I'm having problems flashing a new ROM. Every time I try to flash a different rom, it says it flashes but it just goes back to the 4.4 rom I flashed first. I can restore a backup just fine, but even from the backup it does the same thing.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
I flashed a Kit Kat rom, and before I was having problems with recovery. Now I'm having problems flashing a new ROM. Every time I try to flash a different rom, it says it flashes but it just goes back to the 4.4 rom I flashed first. I can restore a backup just fine, but even from the backup it does the same thing.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
My MAC address keeps changing after reboot, and wifi is screwy no matter what I do. Full Wipe, factory reset, Factory image restore. Its seems the 4.4 roms change things that cant be undone. I now have to have my phone replaced.
Gah. I'd rather not have to have my phone replaced. I feel as if its just 4.4 ROMs though.
Sent from my Nexus 4 using Tapatalk
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Try reflasing your recovery. If that doesn't work, then flash the 4.3 factory images.
EggosEvo said:
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I had 4.4 ported from n5, and then i flashed a 4.3 custom rom and didn't have any problems...
What custom recovery are u using ?
sergiu9my said:
I had 4.4 ported from n5, and then i flashed a 4.3 custom rom and didn't have any problems...
What custom recovery are u using ?
Click to expand...
Click to collapse
I'm on the latest CWM touch, I believe 6.0.4.3. I haven't actually tried going from the 4.4 rom to a 4.3, but I know I can't go from 4.4 to a different 4.4 rom, or from 4.3 rom to a different 4.4 rom, it just goes to the first one I flashed.
EggosEvo said:
I'm on the latest CWM touch, I believe 6.0.4.3. I haven't actually tried going from the 4.4 rom to a 4.3, but I know I can't go from 4.4 to a different 4.4 rom, or from 4.3 rom to a different 4.4 rom, it just goes to the first one I flashed.
Click to expand...
Click to collapse
Try using the latest twrp.
sergiu9my said:
Try using the latest twrp.
Click to expand...
Click to collapse
Haven't there been people having issues flashing 4.4 with TWRP? Or has Team Win updated it since then?
EggosEvo said:
Haven't there been people having issues flashing 4.4 with TWRP? Or has Team Win updated it since then?
Click to expand...
Click to collapse
Yes it's updated.
http://forum.xda-developers.com/showthread.php?t=2002326
sergiu9my said:
Yes it's updated.
http://forum.xda-developers.com/showthread.php?t=2002326
Click to expand...
Click to collapse
GooManager is telling me that there is no recovery available for my device. That's odd.
If all else fails, download the stock 4.3 image and fastboot flash it, then try whatever other ROM you wanted.
EggosEvo said:
GooManager is telling me that there is no recovery available for my device. That's odd.
Click to expand...
Click to collapse
Here is the flashable zip: https://www.dropbox.com/s/n8li9hq74weq8t6/TWRP-2.6.3.2-mako_flashable.zip
Flash it in recovery and then twrp will be ure default recovery.
Then try to flash a 4.3 rom.
sergiu9my said:
Here is the flashable zip: https://www.dropbox.com/s/n8li9hq74weq8t6/TWRP-2.6.3.2-mako_flashable.zip
Flash it in recovery and then twrp will be ure default recovery.
Then try to flash a 4.3 rom.
Click to expand...
Click to collapse
Successfully flashed PAC with TWRP. Tested PA 4.4, and still flashed the first 4.4 rom i flashed.
EggosEvo said:
Successfully flashed PAC with TWRP. Tested PA 4.4, and still flashed the first 4.4 rom i flashed.
Click to expand...
Click to collapse
Try doing what I suggested if you're still having the revert to original 4.4 issue.
orangekid said:
Try doing what I suggested if you're still having the revert to original 4.4 issue.
Click to expand...
Click to collapse
I won't have access to a computer with ADB until late tonight. But I'll try that and report back either tonight or tomorrow.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
I won't have access to a computer with ADB until late tonight. But I'll try that and report back either tonight or tomorrow.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
The only other thing you might try now is flashing any 4.3 or 4.2.2 ROM, reboot, and see if it's now on that one or still on 4.4...
Or is that what you already did with PAC?
You can also manually format /system then /data from TWRP or CWM then manually flash your new ROM.
orangekid said:
The only other thing you might try now is flashing any 4.3 or 4.2.2 ROM, reboot, and see if it's now on that one or still on 4.4...
Or is that what you already did with PAC?
You can also manually format /system then /data from TWRP or CWM then manually flash your new ROM.
Click to expand...
Click to collapse
That's what I did. I went from 4.4 to PAC, and it booted into PAC. Same with CM 10.2. It seems to just be happening with 4.4 roms.
EggosEvo said:
That's what I did. I went from 4.4 to PAC, and it booted into PAC. Same with CM 10.2. It seems to just be happening with 4.4 roms.
Click to expand...
Click to collapse
just manual format /system /data and /boot is the only thing I can think of besides what I've already mentioned.
weird issue...
orangekid said:
just manual format /system /data and /boot is the only thing I can think of besides what I've already mentioned.
weird issue...
Click to expand...
Click to collapse
I just wiped /system and /data, and now the 4.4 PA fails to flash, but CM 10.2 flashed. I'm gonna switch to CWM to see if it'll flash there.
UPDATE: CWM would NOT let me go back to the previous option when asking me to reflash recovery when booting, and it didn't flash PA, so now I'm stuck on the first 4.4 build with no GApps until 9 or 10 tonight. First thing I'm doing when I get home is flashing the factory image.
Greetings all knowing androidians...
I am currently on cm10.2 stable and have been trying to move to cm11 for a while but every time I go to flash it fails. I see that others are running it no problem so I'm confused or at least suspect something is different and I am missing it.
Details :
vs980
Twrp 2.6.3.2
Cm 10.2 stable
If you'd looked around .... your recovery is a little old.
I'm using 2.6.3.4 and having no problem with kitkat.
I did and attempted to update to Twrp 2.6.3.3 but wouldn't flash said that the recovery was not a loki file... Another issue I ran into. As for 2.6.3.4.. I haven't been able to find that version.
mulderato said:
I did and attempted to update to Twrp 2.6.3.3 but wouldn't flash said that the recovery was not a loki file... Another issue I ran into. As for 2.6.3.4.. I haven't been able to find that version.
Click to expand...
Click to collapse
Use freegee app to update to 2.6.3.3 twrp.. One button install.. Magic baby
mulderato said:
I did and attempted to update to Twrp 2.6.3.3 but wouldn't flash said that the recovery was not a loki file... Another issue I ran into. As for 2.6.3.4.. I haven't been able to find that version.
Click to expand...
Click to collapse
I'm using 2.6.3.4 (recovery-flashable zip) from here:
http://forum.xda-developers.com/showthread.php?t=2469995
You guys are genius... Loki updated... Attempting to flash!
OK used free gee to update to 2.6.3.3. Tried updating to .4 using the zip provided and using the flash from zip function built into freegee but eventhough it says successful it isn't flashing. How can I get free gee to recognize .4 or should I not worry about it?
I will keep saying this! I really dunno why you people keep using TWRP! I always read issues about TWRP and not with CWM! I use Philz touch recovery which is CWM-based (see original android development). It works like magic with a lot of nice features!
Sent from my LG-D802 using XDA Premium 4 mobile app
mulderato said:
OK used free gee to update to 2.6.3.3. Tried updating to .4 using the zip provided and using the flash from zip function built into freegee but eventhough it says successful it isn't flashing. How can I get free gee to recognize .4 or should I not worry about it?
Click to expand...
Click to collapse
Try to flash the 2.6.3.4 zipfile in RECOVERY ...
Life Engineer said:
I will keep saying this! I really dunno why you people keep using TWRP! I always read issues about TWRP and not with CWM! I use Philz touch recovery which is CWM-based (see original android development). It works like magic with a lot of nice features!
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
all those stuck on ota and cwm, Will likeky wager differently
plus allmost all custom roms a dive twrp because it did not have issues cwm had in beginning.
Sent from my LG-D802 using xda app-developers app
Life Engineer said:
I will keep saying this! I really dunno why you people keep using TWRP! I always read issues about TWRP and not with CWM! I use Philz touch recovery which is CWM-based (see original android development). It works like magic with a lot of nice features!
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does Philz-CWM have OTG support yet ?
I started out yrs ago on CWM ---> moved to TWRP due to excellent OTG support and stick with TWRP since, on multiple devices.
OTG support is a MUST for me --> I can have many GBs worth of ROMBackups on my USBs which I can switch easily.
All my ROMs are on the USB too, easy to get to... not a worry to wipe the phone.
By the way, I've not seen any issue with 2.6.3.4 yet (doing 4.2.2 & 4.4.2).
So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
sawyerbenjamin said:
So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
Click to expand...
Click to collapse
Glad I'm not the only one with this issue, I gave up on trying to install cyanogenmod after numerous failures, I believe it has something to do with having the ZV8 version of The Sprint G2, luckily there's a ROM out there based on cyanogenmod that will work with all Variants of the LG G2, I think your will enjoy this ROM.
http://forum.xda-developers.com/showthread.php?p=46907369
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
sawyerbenjamin said:
So I'm on 4.2.2, rooted.
I just flashed CM11 (first with, then without gapps) and got an annoying bootloop; just the LG Logo.
Luckily I had a backup of stock, so it's all good.
The thing is, I really want CM11.
So what are my prerequisites? Do I have to flash a certain radio or something? I did everything right in every one of my attempts (Flash system, data, cache, etc)
Any advice?
Thanks!
---------------------------
Just flashed TWRP that apparently has the Loki hack (.zip file via Flashify) and same result.
Click to expand...
Click to collapse
If I had to guess I'd say you're on ZVA. Try flashing the ZV8 modem, then CM and see if that works. Get the most updated twrp and CM11 also. CM just released the M8 version yesterday which is a snapshot or stable build.
I had CM up and running a couple weekends ago. Started from ZVC so I had to flash the ZV8 modem for it to boot. Smooth running after that.
Sent from my LG-LS980 using Tapatalk
gonk24 said:
If I had to guess I'd say you're on ZVA. Try flashing the ZV8 modem, then CM and see if that works. Get the most updated twrp and CM11 also. CM just released the M8 version yesterday which is a snapshot or stable build.
I had CM up and running a couple weekends ago. Started from ZVC so I had to flash the ZV8 modem for it to boot. Smooth running after that.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Never had to flash a modem before. Think you can point me in the right direction?
And I actually am trying to use the latest snapshot. Haha.
Thank you!
--------------------
EDIT
Found ZV8 and flashed and it booted up on the first try. Thanks!
TechGirl90 said:
Glad I'm not the only one with this issue, I gave up on trying to install cyanogenmod after numerous failures, I believe it has something to do with having the ZV8 version of The Sprint G2, luckily there's a ROM out there based on cyanogenmod that will work with all Variants of the LG G2, I think your will enjoy this ROM.
http://forum.xda-developers.com/showthread.php?p=46907369
Sent from my LS980 running PA 4.4.4 KitKat using Tapatalk???
Click to expand...
Click to collapse
Well it took me forever on my friend's wifi to download CM and Gapps, so I think I'm just gonna flash the modem like the other person said and get CM11 working. I'll try your method when I get home and have faster download speed. Lol.
Thanks though!
sawyerbenjamin said:
Never had to flash a modem before. Think you can point me in the right direction?
And I actually am trying to use the latest snapshot. Haha.
Thank you!
--------------------
EDIT
Found ZV8 and flashed and it booted up on the first try. Thanks!
Click to expand...
Click to collapse
:good:Excellent, glad to hear that worked for you. LG is definitely more difficult to work with than some other brands. My last device was an HTC and it was so easy to flash roms back and forth. \
Go ahead and grab the modem zip for ZVA (if that's what you were on) to have in case you want to restore your backup. Flash that, then restore. Otherwise it will bootloop also.
gonk24 said:
:good:Excellent, glad to hear that worked for you. LG is definitely more difficult to work with than some other brands. My last device was an HTC and it was so easy to flash roms back and forth. \
Go ahead and grab the modem zip for ZVA (if that's what you were on) to have in case you want to restore your backup. Flash that, then restore. Otherwise it will bootloop also.
Click to expand...
Click to collapse
Coming from an S3, I got this G2 yesterday and its amazing, so no complaints here. Haha.
And I'll be sure to download the ZVA zip. Thanks!
sawyerbenjamin said:
Coming from an S3, I got this G2 yesterday and its amazing, so no complaints here. Haha.
And I'll be sure to download the ZVA zip. Thanks!
Click to expand...
Click to collapse
Welcome to the G2! Take a look at the stock camera mod by xdabebb in the G2 development section. Well worth the time. G2 Tweaksbox is another favorite. It (along with the xposed framework) allows you to customize tons of areas if the LG skin.
Sent from my LG-LS980 using Tapatalk
Hi,
Yesterday I went to flash CyanogenMod 11 on my Galaxy s4 (GT19505) and it wouldn't work. The first time, it started then went to a black screen. I turned my phone back on to find it wouldn't boot up at all (I waited over 10 minutes for it). I can access recovery mode, and when I did it again, it said md5 couldn't be found.
I used Odin to flash the most recent CT auto root and then moved over TWRP (with Odin) and I had no trouble with these.
I accidentally moved TWRP 2.5 over instead of 2.7. I was running 4.4 KitKat on my phone. Could it be 2.7 isn't compatible with CM 11?
Help!?
It should just work.
Flash the latest TWRP or Philz.
Perform a full wipe.
Flash Cyanogenmod.
What version are you trying to flash from Cyanogenmod? Use the nightlys and if one doesn't work try the version before that one.
ps you can skip the step nexttime about flashing cf-auto root. You don't have to do this. You can just flash the recovery you want.
3593483
Lennyz1988 said:
It should just work.
Flash the latest TWRP or Philz.
Perform a full wipe.
Flash Cyanogenmod.
What version are you trying to flash from Cyanogenmod? Use the nightlys and if one doesn't work try the version before that one.
ps you can skip the step nexttime about flashing cf-auto root. You don't have to do this. You can just flash the recovery you want.
Click to expand...
Click to collapse
I'm using a stable version. I haven't downloaded any latest ones. How would i do that if I can't access the phone? Boot it to download then go from there?
are you sure you (even) flashed a (compatible) kernel?
Sent from my GT-I9505 using XDA Premium 4 mobile app on OmegaRom v19
Is there any difference between 19500 and 19505? I'll try a new CM download...knowing my uncertainty I probably got an incompatible rom.
How stable are the nightlies?
Manganese said:
Is there any difference between 19500 and 19505? I'll try a new CM download...knowing my uncertainty I probably got an incompatible rom.
How stable are the nightlies?
Click to expand...
Click to collapse
You should only flash a rom for YOUR model phone, and for me the nightlies were stable enough to use.
dwarfer66 said:
You should only flash a rom for YOUR model phone, and for me the nightlies were stable enough to use.
Click to expand...
Click to collapse
So I redid TWRP, now what about CM 11? TWRP uses the jfltexx in its name...do I just use Odin to move CM?
So, I installed TWRP 2.7 and it worked. All is good, currently enjoying CM!!!
Now the battery is saying it's at 0%...how do I fix that?
Now my password isn't working for some reason. I did a restore with TWRP and now I can get into my phone. Fix?
Now my password isn't working for some reason. I did a restore with TWRP and now I can get into my phone. Fix?
Did you wipe before restoring?
Lennyz1988 said:
Did you wipe before restoring?
Click to expand...
Click to collapse
No. I just tried it and the same problem occurred. It's no biggie, I can reformat the settings myself. Thanks for the help.
dude, google it
Sent from my GT-I9505 using XDA Premium 4 mobile app
Hey guys and gals. I have my old g2 that I rarely use anymore, but want to tinker with. My problem is that any LP or MM aosp ROMs won't fully boot. They all just bootloop forever. I've tried different versions of twrp. I've tried just about every bootstack. I've followed flashing instructions to the letter. It's currently running serenity 5.0.2 because stock based seems to take fine, and serenity is relatively debloated. I should add, the laptop fried a few weeks ago, so I'm trying to figure this out via mobile only. Any insight would be greatly appreciated. I'm at a loss here.
FlashHappy78 said:
Hey guys and gals. I have my old g2 that I rarely use anymore, but want to tinker with. My problem is that any LP or MM aosp ROMs won't fully boot. They all just bootloop forever. I've tried different versions of twrp. I've tried just about every bootstack. I've followed flashing instructions to the letter. It's currently running serenity 5.0.2 because stock based seems to take fine, and serenity is relatively debloated. I should add, the laptop fried a few weeks ago, so I'm trying to figure this out via mobile only. Any insight would be greatly appreciated. I'm at a loss here.
Click to expand...
Click to collapse
did you tried hybrid bootstaacks.? did you followed installation.?
wipe all
copy hybridto phone/install/go to main menu/reboot into recovery from recovery/ once in twrp flash rom and gapps.
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
raptorddd said:
did you tried hybrid bootstaacks.? did you followed installation.?
wipe all
copy hybridto phone/install/go to main menu/reboot into recovery from recovery/ once in twrp flash rom and gapps.
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Click to expand...
Click to collapse
Yup. Tried the hybrid bootstacks. Every time I installed, rebooted recovery and flashed ROM and gapps. Same effect
Sent from my LG-D800 using Tapatalk
FlashHappy78 said:
Yup. Tried the hybrid bootstacks. Every time I installed, rebooted recovery and flashed ROM and gapps. Same effect
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
did you do same steps installing? flash hybrid then reboot from recoery into recovery and then proceed to flash roms and gapps?
raptorddd said:
did you do same steps installing? flash hybrid then reboot from recoery into recovery and then proceed to flash roms and gapps?
Click to expand...
Click to collapse
Yes I did.
Sent from my LG-D800 using Tapatalk
FlashHappy78 said:
Yes I did.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
you might need to go back to stock using kdz or tot method. start from scratch