Related
Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help
wolfsstolz said:
Hello, sorry when i post a new Thread i think that many users have the same Problem but my english is not so good that i can find the right Thread ... I have Flash :
I9505_Omega_v2.0_GUEUBMG8_Android_4.3_md5_830353DC5EB14151A017C340C1285E51
Now i have flash a other Rom:
aokp_i9505_unofficial_2013-05-19
and that:
I9505XXUAMDM_I9505OXAAMDM_I9505XXUAMDM_HOME.tar
Now i dont have Sound anymore (micro and Sound are Dissable) Now i have read, that i have make a Bootloader Downgrade and have shoot i up my Bootloader with that :S
What can i doo that Sound works again !? Thanks for Help
Click to expand...
Click to collapse
wipe data and cache.
if not, reflash your stock firmware, wipe data and cache, reboot
no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
When another User Have the same Problem it Please write it here to see that is a big problem for other Users too
Sorry but with Apple i dont have this PRoblem maybe i go back XD
wolfsstolz said:
no, that dosnt work, that is a buck in bootloader (4.3 downgrade) i have do flash all roms (wipe too) i have flash a pit rom too but this PRoblem with Bootloader brick is the same. I have Read that many German Users have the same Problem when they flash a higher rom and downgrade it then.I think i must wait for a Developer who have the same Problem :S
Click to expand...
Click to collapse
why dont you flash MH8 or 5 firmware, it contains the newer bootloader
Edit: please take a look here http://forum.xda-developers.com/showthread.php?t=2436368
when i flash that Sound dont go anymore too. the Problem is a bug in botloader in the newer FW when i have read that correctly
Sorry, i have read that not right .....
Can you give me a link from Rom ?! I only found a rom
forum.xda-developers.com/showthread.php?t=2299087
but this is only without new Bootloader and i think i need that with bootloader or works that too !?
Thansk for Help
Push Thread Too ....
I have Problem with Sound(Downgrade to Stock Rom from Omega Rom)
Now i have Read that i must install fallow Roms:
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBM G3_NEE
and that:
GT-I9505-Factory-Firmware-Full-Wipe-DBT
Basis I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8
This Roms are in Forum but Theme is Close and Files only on **** hoster (Hotfile)
Who can upload that to another hoster (Hotfile is very slow in Germany 30 kb and 1 gb download go of :S ) like upoaded.to or mega.co.nz ?!
Who can help me for Sound come back please help. I have do all what i have read in Forum but nothing works for me.
Thanks for Help.
No People have a Idea !????
I have make a Photo from logger, it was nice when a dev can look ...
Who can tell me from that Folder:
My Android Folder:
1. i have more "mnt" Folder (mnt + mnt_1)
2. On Storage Folder i can see: USBDriveA ,USBDriveB, USBDrive ..... looks folfer i can see: ExtSdCard - sdcard_3
3. I have a folder named: Firmware + Firmware-mdm
4. ALL Files in : sys/fs/selinux are empty, 0kb , Subfolder too
5. In mnt_1 sys/fs/ext4 Folder are too mutch Folders !? looks on mmcblk0p10 + 16+18+26+29 with same Files
and many more .... Please , who can look on his Machine to this Folders, is that the same !?
Here Are Photos from logger that my Sound dosnt work:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I cant believe that no People can help me to bring back my Sound ....
Here a logcat answer from Sound .....
D/ALSADevice(10225): No valid input device: 0
V/ALSADevice(10225): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _enadev value Speaker
E/alsa_ucm(10225): Invalid current verb value: Inactive - -1
E/alsa_ucm(10225): No valid device Speaker found
D/ALSADevice(10225): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice(10225): switchDevice Done
D/alsa_ucm(10225): snd_use_case_set(): uc_mgr 0x40f97fb0 identifier _verb value HiFi
E/alsa_ucm(10225): Control device not initialized
E/alsa_ucm(10225): Control device not initialized
W/alsa_ucm(10225): error snd_use_case_apply_mixer_controls
D/ALSADevice(10225): close: handle 0x40026d40 h 0x0
D/ALSADevice(10225): open: handle 0x40026d40, format 0x2
V/ALSADevice(10225): Music case
D/ALSADevice(10225): Device value returned is hw:0,0
V/ALSADevice(10225): flags 0, devName hw:0,0
E/alsa_pcm(10225): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice(10225): pcm_open returned fd -1
E/ALSADevice(10225): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA(10225): Device open failed
I/audio_a2dp_hw(10225): adev_open: adev_open in A2dp_hw module
I/AudioFlinger(10225): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger(10225): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1073900584
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1073900664
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc(10225): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc(10225): adev_set_master_volume : Enter 1.000000
I/AudioFlinger(10225): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase(10225): Not output found for attached devices 00000003
E/AudioPolicyManagerBase(10225): Failed to open primary output
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase(10225): getDeviceForStrategy() speaker device not found
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
E/AudioPolicyService(10225): couldn't init_check the audio policy (No such device)
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 20 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 20
V/TranscoderService(10225): TranscoderService created
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 23 ret 0
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 23
D/tms_audio_hw/AudioTmsIpc(10225): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
I/power ( 5291): *** release_dvfs_lock : lockType : 1
D/CustomFrequencyManagerService( 5291): releaseDVFSLockLocked : Getting Lock type frm List : DVFS_MIN_LIMIT frequency : 1566000 uid : 10135 pid : 8603 tag : [email protected]
flash this firmware, wipe data and cache after, reboot http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html
Flash stock kernel again and you would be good.
I had this issue too and found it hard way that it's custom kernel causing this issue.
You can also try this.
Switch off your phone (not restart) and wait for 15-20 secs. And turn it back on. Some users are saying, this will get back your sound.
I have flash that many Times but i will test that again .... Thanks for Help.
Is that the same Rom ? :
I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME.tar.md5
ok, i have Flash now the Rom again, have 3 Times make a Factory Reset + Cache Wipe
Then i have Flash the Kernel only and power of for 20 Seconds my Galaxy then i have Reboot that but no Sound again
Then i have make a LogCat and the Same here: (No Speaker found)
D/ALSADevice( 6355): No valid input device: 0
V/ALSADevice( 6355): switchDevice,rxDev:Speaker, txDevnull), curRxDev:None, curTxDev:None
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _enadev value Speaker
E/alsa_ucm( 6355): Invalid current verb value: Inactive - -1
E/alsa_ucm( 6355): No valid device Speaker found
D/ALSADevice( 6355): switchDevice: mCurTxUCMDevivce None mCurRxDevDevice Speaker inCallDevSwitch = 0
V/ALSADevice( 6355): switchDevice Done
D/alsa_ucm( 6355): snd_use_case_set(): uc_mgr 0x407ba2f8 identifier _verb value HiFi
E/alsa_ucm( 6355): Control device not initialized
E/alsa_ucm( 6355): Control device not initialized
W/alsa_ucm( 6355): error snd_use_case_apply_mixer_controls
D/ALSADevice( 6355): close: handle 0x43d4ad40 h 0x0
D/ALSADevice( 6355): open: handle 0x43d4ad40, format 0x2
V/ALSADevice( 6355): Music case
D/ALSADevice( 6355): Device value returned is hw:0,0
V/ALSADevice( 6355): flags 0, devName hw:0,0
E/alsa_pcm( 6355): cannot open device '/dev/snd/pcmC0D0p', errno 2
V/ALSADevice( 6355): pcm_open returned fd -1
E/ALSADevice( 6355): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 6355): Device open failed
I/audio_a2dp_hw( 6355): adev_open: adev_open in A2dp_hw module
I/AudioFlinger( 6355): loadHwModule() Loaded a2dp audio interface from A2DP Audio HW HAL (audio) handle 3
I/AudioFlinger( 6355): loadHwModule() Loaded usb audio interface from SEC USB audio HW HAL (audio) handle 4
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsInitSilenceFrames : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit: thread started with name =TerminalModeAudioServer and id = 1138011176
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): initMutex: AudioClientSocketMutex Mutex Created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientSetup : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit: thread started with name =TerminalModeAudioClient and id = 1138011256
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientInit exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_open : Exit
D/tms_audio_hw/AudioTmsIpc( 6355): adev_init_check : Enter
D/tms_audio_hw/AudioTmsIpc( 6355): adev_set_master_volume : Enter 1.000000
I/AudioFlinger( 6355): loadHwModule() Loaded tms audio interface from TMS Audio HW HAL (audio) handle 5
E/AudioPolicyManagerBase( 6355): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 6355): Failed to open primary output
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyManagerBase( 6355): getDeviceForStrategy() speaker device not found
E/AudioPolicyService( 6355): couldn't init_check the audio policy (No such device)
V/TranscoderService( 6355): TranscoderService created
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen :Enter
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Socket Success Name /data/TMAudioSocketClient
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Bind Success gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen Listen Done gAudioClientLocalSockFd 21 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Socket Success Name /data/TMAudioSocketServer
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Bind Success gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen Listen Done gAudioServerLocalSockFd 22 ret 0
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_CMD SIZE 16
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen SizeInBytes 12288
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen accept Start len 110 gAudioServerLocalSockFd 22
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_DATA SIZE 24
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen PLATFORM_AUDIO_META_DATA SIZE 20
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsClientListen accept Start len 110 gAudioClientLocalSockFd 21
D/tms_audio_hw/AudioTmsIpc( 6355): AudioTmsServerListen : Givimg Permission 0777 mode , 0 ret
W/ActivityManager( 764): Launch timeout has expired, giving up wake lock!
it maybe a hardware issue.
dial *#7353# and make test
I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp
wolfsstolz said:
I have a Pit Rom here
Factory_Firmware_Full_Wipe_I9505XXUBMGA_I9505OXXBMG3_NEE
and:
GT-I9505-Factory-Firmware-Full-Wipe-DBT I9505OXABMF8
But when i load that in Odin , i will become a error , invalid .....
Same is with that Rom (one File Rom)
I9505XXUBMEA_I9505OXABMEA_I9505XXUBMEA_HOME.tar.md5 is invalid
I can only flash 1 File Roms
<OSM> MD5 hash value is invalid
<OSM> PDA_I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8.tar.md5 is invalid.
<OSM> End...
no sound here too , here are log Files:
E/Encryption( 187): created DirEncryptionManager
D/Vold ( 187): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Encryption( 187): enable android secure container 'sdcard'
D/Vold ( 187): Volume sda state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdb state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sde state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): Volume sdf state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 187): '/dev/block/mmcblk0' : disk_size (15758000128)
D/DirectVolume( 187): DirectVolume::readId -> path '/sys/devices/platform/msm_sdcc.2/mmc_host/mmc2/mmc2:e624/block/mmcblk1/device/cid'
D/DirectVolume( 187): DirectVolume::readId -> id '035344535530384780303189d800cab0'
D/DirectVolume( 187): DirectVolume::handleDiskAdded -> mDiskMajor 179, mDiskMinor 32, NPARTS:1
D/Vold ( 187): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
W/PackageManager( 766): Unknown permission com.sec.android.permission.VIDEOHUB in package com.sec.android.app.videoplayer
W/PackageManager( 766): Unknown permission android.permission.SYSTEM_ALERT in package com.sec.android.app.videoplayer
I have upload the LogFile, when you have time for that, you can look on that. Thanks
http://ul.to/k34sopfp
Click to expand...
Click to collapse
sound wont work with older firmware even with the pit. you have to flash official updated firmware hard reset your device.also make sure its your phones official firmware.if that don't work try kies emergency firmware upgrade. hope this helps.
Hi,
Currently I'm compiling OmniRom for Samsung Galaxy Mega GT-I9205.
When I try to boot it for the first time, the Omni is stuck at the boot animation...
May I know what is the general failure for this particular issue? and how to solve it?
logcat F/
Code:
12-29 19:01:06.722 F/MediaProfiles( 287): frameworks/av/media/libmedia/MediaProfiles.cpp:324 CHECK(quality != -1) failed.
12-29 19:01:06.722 F/libc ( 287): Fatal signal 6 (SIGABRT) at 0x0000011f (code=-6), thread 287 (zygote)
logcat /E
Code:
12-29 19:01:07.513 E/QualcommCamera( 754): Qint android::get_number_of_cameras(): E
...
12-29 19:01:07.513 I/AudioPolicyManagerBase( 754): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
12-29 19:01:07.523 D/ALSADevice( 754): ALSA module opened
12-29 19:01:07.533 D/AudioHardwareALSA( 754): AudioHardware: DLOPEN successful for ACDBLOADER
12-29 19:01:07.533 D/ACDB-LOADER( 754): ACDB -> ACDB_CMD_INITIALIZE
12-29 19:01:07.533 E/ ( 754): [ACDB RTC]->rtc init done!->result [0]
12-29 19:01:07.533 E/Diag_Lib( 754): actp_diag_init: call diag init function with B5F20ECD
12-29 19:01:07.533 E/Diag_Lib( 754): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
12-29 19:01:07.533 E/Diag_Lib( 754): actp_diag_init: diag init failed
12-29 19:01:07.533 E/ ( 754): [ACDB ACPH]->actp diag init done!
---
I suspect the media_profiles.xml is corrupted... but nope...
anywhere this is the comparison of media_profiles.xml between
melius >> https://github.com/Grarak/android_d...mon/blob/android-4.4/media/media_profiles.xml
hammerhead >> https://github.com/omnirom/android_device_lge_hammerhead/blob/android-4.4/media_profiles.xml
Diff >> http://diffchecker.com/ghjvhy51
and the device mk file
Code:
https://github.com/Grarak/android_device_samsung_melius-common/blob/android-4.4/melius-common.mk
# Media Profile
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/media/media_profiles.xml:system/etc/media_profiles.xml
# Note: Didnt have media_codecs.xml
Code:
https://github.com/omnirom/android_device_lge_hammerhead/blob/android-4.4/device.mk
PRODUCT_COPY_FILES += \
device/lge/hammerhead/media_codecs.xml:system/etc/media_codecs.xml \
device/lge/hammerhead/media_profiles.xml:system/etc/media_profiles.xml
Try using hammerhead (or another closer similar Qcom device)'s media_codec.xml and media_profiles.xml (or remove those files)
Thank your for the suggestion... look like i have to test on hammerhead xml afterall :crying:
but b4 that,
Im hoping someone able to tell me the logcat diagnostic
coz this file is currently used in CM11 (I9205) and they didnt have issue for this particular matter
Great news...
I managed to get it working... now omnirom have another working device in his pocket
Solutions: use media codec + profile from hammerhead... media codec + profile by touchwiz wont work
---
but i still have some problem
i able to get the camera to work, but the video recording is recording black screen...
My phone is freezing while in call, neither I or my caller can hear each other while this happens.
From logcat it looks like some kid of audio problem but I don't know what is the real problem.
Could anyone better than me in logs reading tell me how the fix this or what's causing this?
Code:
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
I/FastMixerState(12846): sMaxFastTracks = 8
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
I/audioserver(12846): ServiceManager: 0xf5c18540
D/vndksupport(12846): Loading /vendor/lib/hw/[email protected] from current namespace instead of sphal namespace.
D/vndksupport(12846): Loading /vendor/lib/hw/[email protected] from current namespace instead of sphal namespace.
I/AudioFlinger(12846): Using default 3000 mSec as standby time.
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
W/APM::ConfigParsingUtils(12846): loadOutput() invalid supported devices
W/APM::ConfigParsingUtils(12846): loadInput() invalid supported devices
W/APM::ConfigParsingUtils(12846): loadInput() invalid supported devices
I/APM::ConfigParsingUtils(12846): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
W/audio_hw_primary(12846): mixer_init: Failed to open mixer paths from /vendor/etc/mixer_paths_0.xml, retrying with legacy location
E/audio_route(12846): Control 'HPL Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'HPL Mixer ADCR Switch' doesn't exist - skipping
E/audio_route(12846): Control 'HPR Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'HPR Mixer ADCR Switch' doesn't exist - skipping
E/audio_route(12846): Control 'EP Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'EP Mixer ADCR Switch' doesn't exist - skipping
E/audio_route(12846): Control 'SPK Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'SPK Mixer ADCR Switch' doesn't exist - skipping
E/audio_route(12846): Control 'SPK Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'SPK Mixer ADCR Switch' doesn't exist - skipping
E/audio_route(12846): Control 'HPL Mixer ADCL Switch' doesn't exist - skipping
E/audio_route(12846): Control 'HPR Mixer ADCR Switch' doesn't exist - skipping
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
E/audio_route(12846): Control 'EP EP On' already exists in path 'fm_radio-speaker-headset'
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
V/audio_hw_voice(12846): voice_session_init: Forcing voice config: wide
E/audio_hw_primary(12846): Amplifier initialization failed
W/DeviceHAL(12846): Device 0xf5c3c400 get_master_volume: Function not implemented
W/DeviceHAL(12846): Device 0xf5c3c400 get_master_mute: Function not implemented
W/DeviceHAL(12846): Device 0xf5c3c400 set_master_volume: Function not implemented
W/DeviceHAL(12846): Device 0xf5c3c400 set_master_mute: Function not implemented
I/AudioFlinger(12846): loadHwModule() Loaded primary audio interface, handle 10
I/AudioFlinger(12846): openOutput() this 0xf5c3d000, module 10 Device 2, SamplingRate 48000, Format 0x000001, Channels 3, flags 2
I/AudioFlinger(12846): HAL output buffer size 256 frames, normal sink buffer size 768 frames
D/vndksupport(12846): Loading /vendor/lib/hw/[email protected] from current namespace instead of sphal namespace.
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
I/ViPER4Android_v2(12846): Enter EffectGetDescriptor()
I/ViPER4Android_v2(12846): EffectGetDescriptor(), uuid = 41d3c987-e6cf-11e3-a88a-11aba5d5c51b
I/BufferProvider(12846): found effect "Multichannel Downmix To Stereo" from The Android Open Source Project
I/AudioFlinger(12846): Using module 10 as the primary audio interface
W/AudioFlinger(12846): moveEffects() bad srcOutput 0
I/AudioFlinger(12846): AudioFlinger's thread 0xf4c83a00 tid=12862 ready to run
W/AudioFlinger(12846): no wake lock to update, system not ready yet
W/AudioFlinger(12846): no wake lock to update, system not ready yet
I/AudioFlinger(12846): openOutput() this 0xf5c3d000, module 10 Device 2, SamplingRate 48000, Format 0x000001, Channels 3, flags 8
I/AudioFlinger(12846): HAL output buffer size 480 frames, normal sink buffer size 960 frames
I/AudioFlinger(12846): AudioFlinger's thread 0xf4603980 tid=12865 ready to run
W/AudioFlinger(12846): no wake lock to update, system not ready yet
W/AudioFlinger(12846): no wake lock to update, system not ready yet
I/AudioFlinger(12846): AudioFlinger's thread 0xf42032c0 tid=12867 ready to run
I/bt_a2dp_hw(12846): adev_open: adev_open in A2dp_hw module
I/AudioFlinger(12846): loadHwModule() Loaded a2dp audio interface, handle 18
D/vndksupport(12846): Loading /vendor/lib/hw/audio.usb.default.so from current namespace instead of sphal namespace.
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
I/AudioFlinger(12846): loadHwModule() Loaded usb audio interface, handle 26
D/vndksupport(12846): Loading /vendor/lib/hw/audio.r_submix.default.so from current namespace instead of sphal namespace.
I/r_submix(12846): adev_open(name=audio_hw_if)
I/r_submix(12846): adev_init_check()
W/DeviceHAL(12846): Device 0xf4666640 set_master_mute: Function not implemented
I/AudioFlinger(12846): loadHwModule() Loaded r_submix audio interface, handle 34
D/r_submix(12846): adev_open_input_stream(addr=0)
D/r_submix(12846): submix_audio_device_create_pipe_l(addr=0, idx=9)
D/r_submix(12846): now using address 0 for route 9
I/AudioFlinger(12846): AudioFlinger's thread 0xf4203d80 tid=12871 ready to run
D/r_submix(12846): adev_close_input_stream()
D/r_submix(12846): submix_audio_device_release_pipe_l(idx=9) addr=0
D/r_submix(12846): submix_audio_device_destroy_pipe_l(): pipe destroyed
E/SoundTriggerHwService(12846): could not read implementation properties
D/TelephonyProvider( 3294): subIdString = 1 subId = 1
I/Telecom ( 2955): InCallController: Sending updateCall [[email protected], DIALING, com.android.phone/com.android.services.telephony.TelephonyConnectionService, tel:*********, A, childs(0), has_parent(false), [Capabilities: CAPABILITY_SUPPORT_HOLD CAPABILITY_MUTE CAPABILITY_CANNOT_DOWNGRADE_VIDEO_TO_AUDIO], [Properties:]]: [email protected]
I/Telecom ( 2955): InCallController: Components updated: [ComponentInfo{com.android.dialer/com.android.incallui.InCallServiceImpl}]: [email protected]
I/Dialer ( 6324): CallList.onUpdateCall - [DialerCall_1, DIALING, [Capabilities: CAPABILITY_SUPPORT_HOLD CAPABILITY_MUTE CAPABILITY_CANNOT_DOWNGRADE_VIDEO_TO_AUDIO], [Properties:], children:[], parent:null, conferenceable:[], videoState:Audio Only, mSessionModificationState:0, CameraDir:-1]
I/Dialer ( 6324): InCallPresenter.onCallListChange - Phone switching state: OUTGOING -> OUTGOING
I/Dialer ( 6324): VideoPauseController.onStateChange - hasPrimaryCallChanged: false, videoCanPause: false, isInBackground: false
I/Dialer ( 6324): InCallFragment.setSecondary - SecondaryInfo, show: false, name: null, label: null, providerLabel: null
W/ResourceType( 6324): Failure getting entry for 0x7f100292 (t=15 e=658) (error -75)
I/Dialer ( 6324): InCallFragment.setCallState - PrimaryCallState, state: 6, connectionLabel:
I/Dialer ( 6324): InCallActivity.onPrimaryCallStateChanged
I/Dialer ( 6324): InCallActivity.showMainInCallFragment - shouldShowAnswerUi: false, shouldShowVideoUi: false, didShowAnswerScreen: false, didShowInCallScreen: true, didShowVideoCallScreen: false
W/ResourceType( 6324): Failure getting entry for 0x7f100292 (t=15 e=658) (error -75)
I/Dialer ( 6324): InCallFragment.setCallState - PrimaryCallState, state: 6, connectionLabel:
I/Dialer ( 6324): InCallActivity.onPrimaryCallStateChanged
I/Dialer ( 6324): InCallActivity.showMainInCallFragment - shouldShowAnswerUi: false, shouldShowVideoUi: false, didShowAnswerScreen: false, didShowInCallScreen: true, didShowVideoCallScreen: false
I/AudioFlinger(12846): systemReady
D/PermissionCache(12846): checking android.permission.MODIFY_AUDIO_SETTINGS for uid=1000 => granted (1574 us)
E/AudioService( 2955): Audioserver started.
D/PermissionCache(12846): checking android.permission.CAPTURE_AUDIO_HOTWORD for uid=10181 => granted (340 us)
I/AudioFlinger(12846): AudioFlinger's thread 0xf3803c40 tid=12881 ready to run
I/audio_hw_primary(12846): adev_set_mode mode = 2
D/com.gsamlabs.bbm.lib.NotifyingService( 8880): ===:91:4309:41.4:1
V/audio_hw_voice(12846): prepare_voice_session: active_out_devices: 0x1
V/audio_hw_voice(12846): set_voice_session_audio_path: ril_set_call_audio_path(0)
I/rild ( 2512): type=1400 audit(0.0:1793): avc: denied { search } for name="12846" dev="proc" ino=87474 scontext=u:r:rild:s0 tcontext=u:r:audioserver:s0 tclass=dir permissive=1
I/rild ( 2512): type=1400 audit(0.0:1794): avc: denied { read } for name="cmdline" dev="proc" ino=87476 scontext=u:r:rild:s0 tcontext=u:r:audioserver:s0 tclass=file permissive=1
I/rild ( 2512): type=1400 audit(0.0:1795): avc: denied { open } for path="/proc/12846/cmdline" dev="proc" ino=87476 scontext=u:r:rild:s0 tcontext=u:r:audioserver:s0 tclass=file permissive=1
I/rild ( 2512): type=1400 audit(0.0:1796): avc: denied { getattr } for path="/proc/12846/cmdline" dev="proc" ino=87476 scontext=u:r:rild:s0 tcontext=u:r:audioserver:s0 tclass=file permissive=1
D/audio_route(12846): Apply path: voice-earpiece-wb
D/audio_route(12846): Apply path: voice-earpiece-mic-wb
V/audio_hw_voice(12846): start_voice_session: Opening voice PCMs
V/audio_hw_voice(12846): start_voice_session: pcm_config wideband
I/ActivityManager( 2955): Killing 10371:com.google.process.gapps/u0a113 (adj 906): empty #17
W/zygote ( 2955): kill(-10371, 9) failed: No such process
I/chatty ( 2955): uid=1000(system) ActivityManager identical 2 lines
W/zygote ( 2955): kill(-10371, 9) failed: No such process
I/zygote ( 2955): Successfully killed process cgroup uid 10113 pid 10371 in 135ms
E/BufferQueueProducer( 2475): [com.socialnmobile.dictapps.notepad.color.note/com.socialnmobile.colornote.activity.NoteEditor#0] disconnect: not connected (req=1)
W/libEGL (12010): EGLNativeWindowType 0xd3c7e008 disconnect failed
V/audio_hw_voice(12846): start_voice_session: enabling two mic control
F/libc (12846): Fatal signal 11 (SIGSEGV), code 1, fault addr 0x98 in tid 12889 (reader), pid 12846 (audioserver)
I/crash_dump32(12891): type=1400 audit(0.0:1797): avc: denied { noatsecure } for scontext=u:r:audioserver:s0 tcontext=u:r:crash_dump:s0 tclass=process permissive=1
I/crash_dump32(12893): obtaining output fd from tombstoned, type: kDebuggerdTombstone
I//system/bin/tombstoned( 2515): received crash request for pid 12846
I/crash_dump32(12893): performing dump of process 12846 (target tid = 12889)
F/DEBUG (12893): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
F/DEBUG (12893): AospExtended Version: 'v5.8'
F/DEBUG (12893): Build fingerprint: 'samsung/s5neoltexx/s5neolte:6.0.1/MMB29K/G903FXXU1BQC1:user/release-keys'
F/DEBUG (12893): Revision: '0'
F/DEBUG (12893): ABI: 'arm'
F/DEBUG (12893): pid: 12846, tid: 12889, name: reader >>> /system/bin/audioserver <<<
F/DEBUG (12893): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x98
F/DEBUG (12893): Cause: null pointer dereference
F/DEBUG (12893): r0 00000000 r1 00000160 r2 00000001 r3 f32dc2fc
F/DEBUG (12893): r4 00000160 r5 f5c3ca88 r6 f5c3ca58 r7 f5c3c400
F/DEBUG (12893): r8 f52993f0 r9 00000002 sl 000002c0 fp f5c3ca00
F/DEBUG (12893): ip f511fefc sp f3182880 lr f51189dc pc f50f40c4 cpsr 80070030
F/DEBUG (12893):
F/DEBUG (12893): backtrace:
F/DEBUG (12893): #00 pc 000020c4 /system/lib/libtinyalsa.so (pcm_bytes_to_frames+39)
F/DEBUG (12893): #01 pc 000079d8 /system/lib/hw/audio.primary.universal7580.so (in_read+792)
F/DEBUG (12893): #02 pc 0001f45d /system/vendor/lib/hw/[email protected] (android::hardware::audio::V2_0::implementation::(anonymous namespace)::ReadThread::threadLoop()+216)
F/DEBUG (12893): #03 pc 0000d1b9 /system/lib/libutils.so (android::Thread::_threadLoop(void*)+144)
F/DEBUG (12893): #04 pc 00047ecf /system/lib/libc.so (__pthread_start(void*)+22)
F/DEBUG (12893): #05 pc 0001af59 /system/lib/libc.so (__start_thread+32)
W/NativeCrashListener( 2955): Couldn't find ProcessRecord for pid 12846
E//system/bin/tombstoned( 2515): Tombstone written to: /data/tombstones/tombstone_21
I/BootReceiver( 2955): Copying /data/tombstones/tombstone_21 to DropBox (SYSTEM_TOMBSTONE)
W/AudioSystem( 3132): AudioPolicyService server died!
W/AudioSystem( 2955): AudioPolicyService server died!
W/AudioSystem( 2955): AudioFlinger server died!
W/AudioSystem( 3737): AudioPolicyService server died!
W/AudioSystem( 3737): AudioFlinger server died!
W/AudioRecord( 3737): dead IAudioRecord, creating a new one from obtainBuffer()
I/ServiceManager( 2341): service 'media.audio_flinger' died
I/ServiceManager( 2341): service 'media.audio_policy' died
I/ServiceManager( 2341): service 'media.sound_trigger_hw' died
I/ServiceManager( 3737): Waiting for service media.audio_flinger...
I/ServiceManager( 2955): Waiting for service media.audio_policy...
W/BroadcastQueue( 2955): Background execution not allowed: receiving Intent { act=android.intent.action.DROPBOX_ENTRY_ADDED flg=0x10 (has extras) } to com.google.android.gms/.stats.service.DropBoxEntryAddedReceiver
W/BroadcastQueue( 2955): Background execution not allowed: receiving Intent { act=android.intent.action.DROPBOX_ENTRY_ADDED flg=0x10 (has extras) } to com.google.android.gms/.chimera.GmsIntentOperationService$PersistentTrustedReceiver
I/ServiceManager( 3737): Waiting for service media.audio_flinger...
I/ServiceManager( 2955): Waiting for service media.audio_policy...
I/Xposed ( 3132): fsbi >> nc >> onDataChanged >> 0 > true > 75 > H+
I/ServiceManager( 3737): Waiting for service media.audio_flinger...
I/ServiceManager( 2955): Waiting for service media.audio_policy...
I/Xposed ( 3132): fsbi >> nc >> onDataChanged >> 0 > true > 50 > H+
I/ServiceManager( 3737): Waiting for service media.audio_flinger...
I/ServiceManager( 2955): Waiting for service media.audio_policy...
I/Telecom ( 2955): InCallController: Sending updateCall [[email protected], DIALING, com.android.phone/com.android.services.telephony.TelephonyConnectionService, tel:*********, A, childs(0), has_parent(false), [Capabilities: CAPABILITY_SUPPORT_HOLD CAPABILITY_MUTE CAPABILITY_CANNOT_DOWNGRADE_VIDEO_TO_AUDIO], [Properties:]]: [email protected]
I/Telecom ( 2955): InCallController: Components updated: [ComponentInfo{com.android.dialer/com.android.incallui.InCallServiceImpl}]: [email protected]
I/Telecom ( 2955): CallsManager: setCallState DIALING -> ACTIVE, call: [[email protected], DIALING, com.android.phone/com.android.services.telephony.TelephonyConnectionService, tel:*********, A, childs(0), has_parent(false), [Capabilities: CAPABILITY_SUPPORT_HOLD CAPABILITY_MUTE CAPABILITY_CANNOT_DOWNGRADE_VIDEO_TO_AUDIO], [Properties:]]: [email protected]
my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
aidenskcyu said:
my phone stuck in corrupted recovery mode but i can still access edl mode. i can't flash another custom recovery and can't flash stock rom too, it always says:
Validating Application Configuration
Load APP Configuration
COM:4
PBLDOWNLOADPROTOCOL:0
PROGRAMMER:True
PROGRAMMER:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
RESETSAHARASTATEEMACHINE:False
SEARCHPATH:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
AUTOPRESERVEPARTITIONS:False
PARTITIONPRESERVEMODE:0
PRESERVEDPARTITIONS:0
PRESERVEDPARTITIONS:
ERASEALL:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp
RAWPROGRAM file path: E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\rawprogram0.xml
PATCH file path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\patch0.xml
Programmer Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
Process Index:0
Start Download
Program Path:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -u 4 -s 13:E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp\prog_emmc_firehose_652.mbn 'Current working dir: C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
***** Working Folder:C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
Binary build date: Jun 3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
02:49:12: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM4 --sendxml=rawprogram0.xml --search_path=E:\Installers\EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92\twrp --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
************************************************
02:49:12: INFO: Current working dir (cwd): C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\
02:49:12: INFO: Showing network mappings to allow debugging
02:49:12: INFO:
02:49:12: INFO: Trying to store 'rawprogram0.xml' in string table
02:49:12: INFO: Looking for file 'rawprogram0.xml'
02:49:12: INFO: User wants to talk to port '\\.\COM4'
02:49:12: INFO: Took 0.01500000 seconds to open port
02:49:12: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
02:49:12: INFO: If you don't want this, use --dontsorttags
02:49:12: INFO: Looking for file 'recovery.img'
02:49:12: INFO: Looking for file 'boot.img'
02:49:12: INFO:
Total to be tansferd with <program> or <read> is 35.30 MB
02:49:12: INFO: Sending <configure>
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: XML not formed correctly. Expected a < character at loc 0}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR: 3. TAG not found or recognized}
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
02:49:12: {ERROR:
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
There is a chance your target is in SAHARA mode!!
This can mean
1. You forgot to send DeviceProgrammer first (i.e. QSaharaServer.exe -s 13rog_emmc_firehose_8994_lite.mbn)
2. OR, you did send DeviceProgrammer, but it has crashed and/or is not correct for this target
Regardless this program speaks FIREHOSE protocol and your target is speaking SAHARA protcol, so this will not work
}
Writing log to 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt', might take a minute
Log is 'C:\Users\Hans\AppData\Roaming\Qualcomm\QFIL\COMPORT_4\port_trace.txt'
Download Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.
nml_krishna said:
Since EDL mode is still accessible, try flashing EUI from MiFlash tool (EUI5.9 ZAXCNFN5902606201S can be flashed from this tool ) and get your device back up running.
Click to expand...
Click to collapse
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil
aidenskcyu said:
hey thanks! can you give me some link to this EUI5.9 ZAXCNFN5902606201S rom? i can't find the right rom for miflash
edit: thanks dude it works! but the problem now is how can i flash twrp because it still giving same error in qfil
Click to expand...
Click to collapse
Try Flashing the same EUI twrp through MiFlash tool.
Open MiFlash and browse to twrp folder in EUI_TWRP_6.0.1_V1_ADVANCED_CUOCO92 and connect device in EDL mode.
Once you see the device in MiFlash tool, click on Flash ( leave the flash all except storage checked ).
After flash is complete keep holding power + vol up button for twrp recovery. Hopefully this should fix corrupted twrp.
OR
If you have stock rom CPB file flashed through YGDP tool, follow below procedure to flash it through MiFlash
- Extract CPB file contents using CPB unpacker.
- Rename prog_emmc_firehose.mbn to prog_emmc_firehose_8976_ddr.mbn under the CPB extracted files
- Open MiFlash tool, browse to the CPB extracted folder.
- Connect device in EDL mode
- Click on Flash
Once the flash is complete, device should be able to boot to stock rom.
I was on oxygen os port
after 6th or 7 day it suddenly goes off
and never boot again
i was able to boot in fastboot but not a
single command worked
so i fire up QFIL and try to flash
stock rom but nothing worked
finlly i click [erase all before download]
now i cANT boot in to faSR BOOT and
unable to flash stock rom by qfil
help me
QFIL log
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Failed to write error
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer
Neo neer said:
Start Download
Program Path:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Binary build date: Oct 31 2016 @ 22:51:05
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf
19:27:15: Requested ID 13, file: "D:\repair\HARD BRICK\[firmware27]ZB630KL_ZQL1820_Factory_201812071630_ChangeFlash\prog_emmc_ufs_firehose_Sdm660_ddr.elf"
19:27:16: 624548 bytes transferred in 0.219000 seconds (2.7197MBps)
19:27:16: File transferred successfully
19:27:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:UFS
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:True
Use Verbose:True
***** Working Folder:C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22
Base Version: 16.10.28.15.28
Binary build date: Oct 31 2016 @ 22:51:02
Incremental Build version: 16.10.31.22.51.02
19:27:19: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM22 --erase=0 --noprompt --showpercentagecomplete --testvipimpact --verbose --zlpawarehost=1 --memoryname=ufs
************************************************
19:27:19: INFO: Current working dir (cwd): C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\
19:27:19: INFO: Showing network mappings to allow debugging
19:27:19: INFO: User wants to talk to port '\\.\COM22'
19:27:19: INFO: Took 0.00000000 seconds to open port
19:27:19: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
19:27:19: INFO: If you don't want this, use --dontsorttags
19:27:19: INFO: Sending <configure>
19:27:19: INFO: TARGET SAID: 'Binary build date: Dec 7 2018 @ 17:09:09'
19:27:19: INFO: TARGET SAID: 'Chip serial num: 4294438911 (0xfff7efff)'
19:27:19: INFO: TARGET SAID: 'Supported Functions: program configure nop firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase '
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 17 ('AlwaysValidate') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 2 ('MaxDigestTableSizeInBytes') with value '8192' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 1 ('MaxPayloadSizeToTargetInBytes') with value '1048576' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 14 ('ZlpAwareHost') with value '1' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 23 ('SkipStorageInit') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling usb_al_bulk_set_zlp_mode(TRUE) since ZlpAwareHost='1''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_open(0x2) - If this hangs use SkipStorageInit='1' for configure'
19:27:19: INFO: TARGET SAID: 'memory_name set to 'UFS' and fh.sector_size = 4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MinVersionSupported' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'MaxXMLSizeInBytes' with value '4096'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'Version' with value '1'
19:27:19: INFO: IGNORING UNRECOGNIZED Attribute 'DateTime' with value 'Dec 7 2018 - 17:09:09'
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
19:27:19: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
19:27:19: INFO: Issuing Erase
19:27:19: INFO: _____ _ _____
19:27:19: INFO: |_ _| (_) | ___|
19:27:19: INFO: | | ___ ___ _ _ _ _ __ __ _ | |__ _ __ __ _ ___ ___
19:27:19: INFO: | |/ __/ __| | | | | '_ \ / _` | | __| '__/ _` / __|/ _ \
19:27:19: INFO: _| |\__ \__ \ |_| | | | | | (_| | | |__| | | (_| \__ \ __/
19:27:19: INFO: \___/___/___/\__,_|_|_| |_|\__, | \____/_| \__,_|___/\___|
19:27:19: INFO: __/ |
19:27:19: INFO: |___/
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 8 ('SECTOR_SIZE_IN_BYTES') with value '512' type is 'i''
19:27:19: INFO: TARGET SAID: 'Recognized Attribute Number 10 ('physical_partition_number') with value '0' type is 'i''
19:27:19: INFO: TARGET SAID: 'Calling storage_device_erase(0)'
19:27:19: INFO: TARGET SAID: 'In handleErase Calling storage_device_erase()'
19:27:19: INFO: TARGET SAID: 'Did not specify start/size, format whole device'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to initialize (open whole lun) UFS Device slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'ERROR: Failed to open the device 3 slot 0 partition 0'
19:27:19: INFO: TARGET SAID: 'INFO: Device type 3, slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'WARN: Format failed to open 3 slot 0, partition 0, error -528043608'
19:27:19: INFO: TARGET SAID: 'storage_device_format returned FALSE'
19:27:19: INFO: TARGET SAID: 'ERROR 17: Line 1607: HANDLE_ERASE_FAILURE'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
19:27:19: {ERROR: Something failed with the <erase> command. The port_trace.txt can shed more information on this
Note that for eMMC <erase> is only valid for physical_partition 0. For UFS <erase> is valid for all LUNs
}
Writing log to 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt', might take a minute
Log is 'C:\Users\jainikcomputers\AppData\Roaming\Qualcomm\QFIL\COMPORT_22\port_trace.txt'
Download Fail:FireHose Fail:FireHose Fail:FHLoader Failrocess fail
Finish Download
Click to expand...
Click to collapse
So, basicially did it work for you??? @Neo neer
some how Emmc write protection is enabled
thriloksaiy said:
I aslo did the same thing. selected erase all before download. Now getting failed to write ( Sahara firehose error)
Have you find solution for this @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
somehow EMMC write protection i enabled
kool.5 said:
So, basicially did it work for you??? @Neo neer
Click to expand...
Click to collapse
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
Neo neer said:
i don't know how but
emmc write protention is enabled and there is
only two ways
1) change the motherbord
2) take out storage and reformat it using UFI box and solder again it on bord without damaging any part
i highly recomand visit any expert or go to service center
and my phone is still bricked
unable to go out due to lockdown
Click to expand...
Click to collapse
Okay, thanks for the heads-up.