Related
I remember on my WinMo phones there was a program to speed up the charging through a USB port. Anyone know of a similar app, hack, what have you for our Heros?
all that ever got me was an overheated phone. and defective batteries
Negrito said:
I remember on my WinMo phones there was a program to speed up the charging through a USB port. Anyone know of a similar app, hack, what have you for our Heros?
Click to expand...
Click to collapse
you could try a wireless charger, or use the normal wall charger or get a 3rd party battery.
I use a 3rd party battery, and my phone charges from Dead, to full in under 2 hours. i think my brand battery is a radioshack one but i dont remember, and im too lazy to look lol
If the phone detects that it's hooked to a USB port, it'll charge more slowly because the typical computer port will only output 500 mA. A wall charger typically does a full amp.
codelockdown said:
you could try a wireless charger, or use the normal wall charger or get a 3rd party battery.
I use a 3rd party battery, and my phone charges from Dead, to full in under 2 hours. i think my brand battery is a radioshack one but i dont remember, and im too lazy to look lol
Click to expand...
Click to collapse
No thank you, i dont need something else to carry around. I work next to a computer. it just sucks that if my phone is near dead in the am when i arrive to work it will have to be tethered to the computer most of the day to fully recharge.
kynetx said:
If the phone detects that it's hooked to a USB port, it'll charge more slowly because the typical computer port will only output 500 mA. A wall charger typically does a full amp.
Click to expand...
Click to collapse
yes, thank you. i know. that's why i am asking for a program to trick the device into believing its always the wall charger while its plugged into anything with that program running.
Negrito said:
yes, thank you. i know. that's why i am asking for a program to trick the device into believing its always the wall charger while its plugged into anything with that program running.
Click to expand...
Click to collapse
There is no point in "tricking" the device to think it's the wall charger because what you want is the phone to charge up, not to beleive it's charged up when it's not. The usb port will not output more than 500mA. The phone will only charge as fast as 500mA will get you, no matter what tricks we try to pull on them.
daveli said:
There is no point in "tricking" the device to think it's the wall charger because what you want is the phone to charge up, not to beleive it's charged up when it's not. The usb port will not output more than 500mA. The phone will only charge as fast as 500mA will get you, no matter what tricks we try to pull on them.
Click to expand...
Click to collapse
Actually, most USB 2.0 ports can unofficially support up to 1000mA (which is indeed out of spec), with the only limitation from the device itself which when in spec will not draw more than 500mA. This is why no2chem's Fastcharge worked on WinMo phones, by increasing the maximum limit on the device.
Rootwind said:
Actually, most USB 2.0 ports can unofficially support up to 1000mA (which is indeed out of spec), with the only limitation from the device itself which when in spec will not draw more than 500mA. This is why no2chem's Fastcharge worked on WinMo phones, by increasing the maximum limit on the device.
Click to expand...
Click to collapse
Thanks for the clarification, It's good to learn something new every day
Rootwind said:
Actually, most USB 2.0 ports can unofficially support up to 1000mA (which is indeed out of spec), with the only limitation from the device itself which when in spec will not draw more than 500mA. This is why no2chem's Fastcharge worked on WinMo phones, by increasing the maximum limit on the device.
Click to expand...
Click to collapse
Thank you so much for this post, i couldnt remember no2chem's nick to save my life. I wonder how he feels about dev in android.
daveli said:
There is no point in "tricking" the device to think it's the wall charger because what you want is the phone to charge up, not to beleive it's charged up when it's not. The usb port will not output more than 500mA. The phone will only charge as fast as 500mA will get you, no matter what tricks we try to pull on them.
Click to expand...
Click to collapse
I don't know where you're coming from, but the phone will indeed pull more current when it detects it's on a wall charger. I specifically remember seeing it in the manual.
Has anybody heard anything new on this matter, I really hate not being able to charge at 1A from a computer USB anymore. 500mA is pretty much useless, especially in constant usage, it pretty much just maintains the current %.
from less than 10% to 100% in about 30 minutes when plugged into the wall...turn your phone off while charging!! itll charge so much faster!!
This was specifically about usb....
I seem to remember hearing you can tweak some usb wires (I guess remove the data pins) so the phone thinks it's on AC but I'd want to have connectivity as well as the swift charging. Otherwise I'd have to have two cords on me, though I wonder if the phone charges "AC speed" while off (since there's no mind to talk to the PC's OS)
Negrito said:
I remember on my WinMo phones there was a program to speed up the charging through a USB port. Anyone know of a similar app, hack, what have you for our Heros?
Click to expand...
Click to collapse
yup, i remember that too, it was called fast charge.
iviyth0s said:
I seem to remember hearing you can tweak some usb wires (I guess remove the data pins) so the phone thinks it's on AC but I'd want to have connectivity as well as the swift charging. Otherwise I'd have to have two cords on me, though I wonder if the phone charges "AC speed" while off (since there's no mind to talk to the PC's OS)
Click to expand...
Click to collapse
I know this does't work, as I have a cable with no data pins (it's a cheapy charge cable only) and it's still slow on a pc to charge.
Get a USB 3.0 port.
swears11 said:
Get a USB 3.0 port.
Click to expand...
Click to collapse
ummm... you mean you would have to buy a whole new mobo with usb3.0 support.
I have a belkin travel power surge protector with 3 outlets and 2 usb ports on it. The phone, when plugged into it, doesn't detect that it is plugged into AC power and just charges at USB speeds. Anybody know why? Will it only charge at AC speed if it detects the HTC supplied Ac adapter?
danaff37 said:
I know this does't work, as I have a cable with no data pins (it's a cheapy charge cable only) and it's still slow on a pc to charge.
Click to expand...
Click to collapse
I have a cheapy cable too and that might be why it's still slow. I don't use the cable anymore because my TP used to charge at like 200mAh with it.
swears11 said:
Get a USB 3.0 port.
Click to expand...
Click to collapse
But the problem here is with the software not hardware lol, all someone has to do is change the value of "when connected to computer: Charge 1A" instead of "when connected to computer: Charge 0.5A" (simplified of course)
gunnyman said:
I have a belkin travel power surge protector with 3 outlets and 2 usb ports on it. The phone, when plugged into it, doesn't detect that it is plugged into AC poer and just charges at USB speeds. Anybody know why? Will it only charge at AC speed if it detects the HTC supplied Ac adapter?
Click to expand...
Click to collapse
Because it was a stupid idea to ever limit the charge speed. lol
If only I knew how to program or to edit code, I'd so fix this for all of us >_<
Just got a new motheboard which has high output USB charging for iPhones, pads etc.
Can this work on N1 ?
http://gigabyte.com/MicroSite/185/on-off-charge.htm
edit: driver link is at the bottom for all the hackers. Hopefully its just changing string from apple to android hehe
kazprotos said:
Just got a new motheboard which has high output USB charging for iPhones, pads etc.
Can this work on N1 ?
http://gigabyte.com/MicroSite/185/on-off-charge.htm
edit: driver link is at the bottom for all the hackers. Hopefully its just changing string from apple to android hehe
Click to expand...
Click to collapse
Hopefully not, I dont want my nexus one to be iphone.
But as you know nexus one is using qualcomm motherboard.
But aslong cyanogen and fm transmitter is working there is no problem wiith your phone.
Dear lord what a crappy reply. Stick to disney mate.
It should, it basically just converts the USB port from .5 amps to 1 amp, like a wall charger.
elkyur said:
Hopefully not, I dont want my nexus one to be iphone.
But as you know nexus one is using qualcomm motherboard.
But aslong cyanogen and fm transmitter is working there is no problem wiith your phone.
Click to expand...
Click to collapse
WTF??? May want to lay off the halucinogenics
elkyur said:
Hopefully not, I dont want my nexus one to be iphone.
But as you know nexus one is using qualcomm motherboard.
But aslong cyanogen and fm transmitter is working there is no problem wiith your phone.
Click to expand...
Click to collapse
lol I seriously hope this is a joke!
I agree with JCopernicus, it should definitely work.
I installed the software in the first post but it still charges very slow compared to wall outlet
Slightly OT, but I've got a USB adapter that plugs into the wall that came with my iphone and when I plug the N1 USB cable into this to charge the N1, it still charges very slowly compared to using the proper wall adapter, why is this? Does this iphone adapter restrict the voltage or something?
Generally, "charger detected" is a circuit that has USB data pins shorted together. So when the phone's USB device probes the lines and detects them shorted, it knows it's connected to a power supply.
But since USB max current spec is 500mA, the current draw is restricted - either by the phone or by the supply.
There might be some other connectivity trick that allows the phone to know it can draw x2 current from the socket and won't damage anything. Most phones probably don't limit the current draw and count on the board to do it. Some boards don't limit the current output, or limit it higher. And the fast chargers provide pulsing voltage - which isn't like USB.
So for the board to be able to charge the device, it needs to detect a device that can use pulsing voltage, and enable such voltage on the socket. It doesn't detect Nexus as such a device, I believe, and that's why the charging is slow.
Faster charging with USB
Building on Jack_R1's response, I believe that the phone is limiting the charge rate. You can make the phone "realize" it is connected to a charger rather than a data connection by shorting the 2 middle USB pins together. I have done this in several car chargers, and the N1 About/Status shows charging (AC), which is the faster charge mode. While you can short the pins in the larger end of a dedicated USB cable, if you can disassemble the connector, I found it much easier to open the charger itself to short the pins.
i also have a gigabyte mobo that has this feature but i havent gotten around to test it out yet. I dont think it would work because the feature is software based and will only bump up the voltage if the program detects an iphone connecting to your computer. Gigabyte doesnt want to be liable if they bump up voltage on every device you plug in and fry something.
btw I have tried charging my n1 from my computer and its extremely slow. started charging at around 5pm on sunday and at 11pm it went from about 23%-97% lol.
Yes, USB charging is very slow. It's actually good for the battery, though.
Maybe someone with some know how can look at the driver files for this 3x tech and see how it checks if its an Apple device. Then fool the check and presto!
Shame I don't know how to do any of this
There is a simple hardware (don't worry, it's on the cable) mod for faster charging; however, make sure the phone has good air vent (it means NO CASE when charging).
1. modify your microUSB cable, disconnect the data connector the A (host) plug, then shorten the data connector to the B plug. (This can charge N900 properly, and speed up n1 charging).
2. modify your powered (with AC adapter plugged) USB hub. Simply shorten the #2 and 3 connectors on USB jack. Make sure you cut the copper strip going to the chip or malfunction may occur.
These modification can greatly speed up the charging, but phone will produce a lot of heat (that's why you must have the phone "naked").
I don't understand this. If the phone + battery are capable of being charged at 1000 mAh from the wall charger then why need extra cooling when asking for 1000 mAh from a PC USB socket?
Mine's still defo getting only 500 mAh from the PC USB despite it being able to give up to 2700 mAh for iPad!!! All I want is my 100 mAh charge.
Because what he suggests isn't a proper charging but rather removal of slot power control, and will damage the battery / phone, if succeeds.
Proper charging at 1000mAh requires pulsing voltage - his hack doesn't provide that. Your MB does, but it requires SW intervention to turn it on.
So can someone brew the intervention ?
martinl1030 said:
i also have a gigabyte mobo that has this feature but i havent gotten around to test it out yet. I dont think it would work because the feature is software based and will only bump up the voltage if the program detects an iphone connecting to your computer. Gigabyte doesnt want to be liable if they bump up voltage on every device you plug in and fry something.
btw I have tried charging my n1 from my computer and its extremely slow. started charging at around 5pm on sunday and at 11pm it went from about 23%-97% lol.
Click to expand...
Click to collapse
They are not doing anything to the voltage, simply allowing more current to pass.
And as said in this thread, any typical data USB cable will charge very slowly. And most standard USB ports charge well less than the max specced 500mAh, in fact my subnote at work I found charged my old phone at around 150mah one time when I was dead and needed to top off and it's all I had available.
i'm not sure of the pinout on the micro USB port but i'm pretty sure that that the Mini USB-B port that was used on phones like the G1 used shorting the -Data pin to the unused 5th pin (actually pin 4 on the connector pinout) to activate AC charge mode. some devices actually require a resister of a certain value to be placed across them to work(i know older motorola phones did like IDEN's)
one thing people often forget but should not forget is that current is drawn from the device using power. its not forced on the device. voltage is forced on a device and while a variance is usually ok for devices depending on how they were designed generally its not a good idea to exceed +1.5v on any low power DC device. 120V AC devices are designed to actually work in a much wider range like 100-130V but thats because of the power supply/nature of AC power. it always varies and in japan they use 100v 60hz AC so many electronics power supplies are designed to work in the full range to save costs and only have to make 1 unit for all (same deal with 220-240 switches on PC power supplies)
the reason why you don't want to do this mod is you could damage you PC's motherboard by pulling too much current from its circuits. USB spec is 500ma. performing this type of mod on a power adapter (car or AC) that does not get recognized as an AC charger by the phone is a safer way to go. worst case senario is you break the charger (unless you mess up on the pinout then you could damage you phone too though)
I woke up this morning and the battery of my Atrix was completely dead. Since I was in a hurry to get to work I thought I'm going to charge using the computer in my office with the supplied USB cable.
It appears that the phone won't charge from 0% turned off! I had to borrow a Blackberry wall charger from a college and jump start the Atrix before plugging it to my computer's USB and start charging.
My iPhone 3GS would come back to life if plugged to the USB port after a complete discharge.
Is there a solution for the Atrix? Are there other android devices you know of with the same issue?
Thank you
my milestone also have this prob
The moto wall chargers run at 800+ma. This is more than the usual ~400-600ma that other chargers run at. Computer USB ports only supply 500ma MAX. The atrix doesn't seem to like anything under ~600ma and prefers 800-1000ma for some weird reason.
If you've got a well powered USB port, it will charge the phone. If it's underpowered, the phone won't even take the charge.
Yes, from a dead batt, the phone wont even wake up the charge circuit for anything under 600ma. I've experienced it as well.
Thank you. What about USB 3.0? I have that in my home PC. But it still sucks how I can't wake up the phone if the battery completely drained with all the USB around me at work or wherever when a wall-charger is not within reach.
Shouldn't the phone preserve the last drops of the battery before shutting down so it allows us time to start it up again and charge by USB 2.0?
I think it wouldn't hurt if Motorola made it shutoff at like 2% allowing us to charge the device and get it up using USB 2.0. Or maybe a dev can get around it as an optional tweak for users?!
That also made me think of something else. Would the alarm go off if the battery completely died while you were asleep? I know iphone, Nokia and probably many other smartphones does that (preserving last drops for this purpose).
all usb has the same voltage specs, 3.0 ports wont charge better than 2.0 ports on the same system, the only thing that will make a difference is the build quality of the hardware and the voltage regulation from the power management.
A powered usb hub would be your best bet if you can't get to a moto charger
diedemus said:
all usb has the same voltage specs, 3.0 ports wont charge better than 2.0 ports on the same system, the only thing that will make a difference is the build quality of the hardware and the voltage regulation from the power management.
A powered usb hub would be your best bet if you can't get to a moto charger
Click to expand...
Click to collapse
I thought it's better to bring up this thread instead of opening a new one since I've been investigating the same issue.
We all know that Android phones and widgets especially can drain the battery unexpectedly.
I PM'ed kennethpenn if there's a way to automate a shutdown when the battery reaches a certain level so it can charge and wake up connected to a computer USB 2.0 port (As in if it can be implemented in his ROM). Kenneth replied that he's not sure, and I've been looking for an app that can do that.
Now before we go more on that, I wish to have your opinion on how important you think it is to sacrifice the last little drops of the battery in favor of being to charge/wake up your devices when you're on the go and may not have access to wall charger?
If there's an app that can allow it then I'm welling to do the tests and find the sweet spot of when to shutdown and if it would actually charge to wake up.
Thank you
I had the same problem yesterday, I only have the USB cord with me and I thought my phone was dead for real or defective. Thanks god for XDA ... The user manual did not say anything about computer usb power not being powerfull enough.
CyberPunk7t9, there is (a few) threads dedicated to improving Atrix battery life full of usefull tricks. I did not try it yet, but SetCPU might be of a great help too.
Remeber, the Atrix requires the Motorola usb drivers to be installed to charge the phone off a port. If the phone is off, your computer is not reconigizing that it was plugged in, so the drivers do not start. *I could be wrong* Happen to me last night though
it's a hardware issue on the computer side. without the moto drivers there telling the USB port to up the current coming out, your phone won't charge on it. most computer-based USB ports do not run high current for power purposes unless enabled. it cannot be solved with an app and mandating a shutdown at 2% is most likely going to cause more problems than solve. the solution is to not run your battery down, honestly. you shouldn't be for LiPo batteries anyway.
diedemus said:
all usb has the same voltage specs, 3.0 ports wont charge better than 2.0 ports on the same system, the only thing that will make a difference is the build quality of the hardware and the voltage regulation from the power management
Click to expand...
Click to collapse
It's not voltage that matters, it's current.
I have a gigabyte board which has 'rapid charge' technology, meaning it supplies extra amperage to the usb ports...my battery was close to dying when I saw this thread so as a test I let it completely die and then I tried charging from usb.
Result: It worked.
I still don't get as quick of a charge from USB as I do from the wall but at least there is enough amperage to charge from a completely dead state.
diedemus said:
all usb has the same voltage specs, 3.0 ports wont charge better than 2.0 ports on the same system, the only thing that will make a difference is the build quality of the hardware and the voltage regulation from the power management.
A powered usb hub would be your best bet if you can't get to a moto charger
Click to expand...
Click to collapse
Get your facts straight!..............USB 3.0 IS a powered USB port!
USB 3.0 will charge more devices, quicker
Not only will USB 3.0 cables facilitate faster transfer speeds, but they’ll carry more power, too. The USB-IF recognizes the growing number of portable devices that charge via USB (cellphones, MP3 players, digital cameras), and have bumped the power output from about 100miliamps to 900 milliamps. That means not only will you be able to power more than 4 devices from a single hub, but the increase current will let you charge up heftier hardware as well.
Maximum PC
<edit> Also, my Atrix charges fine off the 3.0 ports on my HP laptop.
dcarpenter85 said:
I have a gigabyte board which has 'rapid charge' technology, meaning it supplies extra amperage to the usb ports...my battery was close to dying when I saw this thread so as a test I let it completely die and then I tried charging from usb.
Result: It worked.
I still don't get as quick of a charge from USB as I do from the wall but at least there is enough amperage to charge from a completely dead state.
Click to expand...
Click to collapse
I have a gigabyte UD7 in my PC. I wanted to use the rapid charge feature for a while. Still planned. Also the On/Off Charge feature to charge the iphone/ipod while the computer is turned off. I will probably assign some time to test those tomorrow.
CaelanT said:
Get your facts straight!..............USB 3.0 IS a powered USB port!
USB 3.0 will charge more devices, quicker
Not only will USB 3.0 cables facilitate faster transfer speeds, but they’ll carry more power, too. The USB-IF recognizes the growing number of portable devices that charge via USB (cellphones, MP3 players, digital cameras), and have bumped the power output from about 100miliamps to 900 milliamps. That means not only will you be able to power more than 4 devices from a single hub, but the increase current will let you charge up heftier hardware as well.
Maximum PC
<edit> Also, my Atrix charges fine off the 3.0 ports on my HP laptop.
Click to expand...
Click to collapse
I have USB 3.0 in my PC too. But as someone stated here, USB 3.0 does not provide more voltage than USB 2.0. Just more consistency I think.
But what matters, Can any of those solutions charge and start a completely dead Atrix?
Thank you for participating guys.
USB ports can only source 100mA unless the host and client agree to a higher current. If as mentioned the Atrix needs more then this to wake-up the phone with a dead battery then it can never request the higher current. This is also why the Moto drivers need to be installed to get the higher current.
CyberPunk7t9 said:
I have USB 3.0 in my PC too. But as someone stated here, USB 3.0 does not provide more voltage than USB 2.0. Just more consistency I think.
But what matters, Can any of those solutions charge and start a completely dead Atrix?
Thank you for participating guys.
Click to expand...
Click to collapse
you need a port or power source that will supply enough current to the phone. period. if your computer's ports don't do it, it won't work. go find a higher amp USB port.
Maybe try the usb 2 to 1 cable? So you plug it into 2 usb ports and than into the atrix
CaelanT said:
Not only will USB 3.0 cables facilitate faster transfer speeds, but they’ll carry more power, too. The USB-IF recognizes the growing number of portable devices that charge via USB (cellphones, MP3 players, digital cameras), and have bumped the power output from about 100miliamps to 900 milliamps.
Click to expand...
Click to collapse
Actually USB 2.0 can supply 500 mA, but as someone said to get more than 100 mA, the host and device have to 'negotiate' which I think means driver support of some kind.
I have noticed in Device Manager says that my SGS plugged into my laptop as a mass storage device is only taking 100 mA, but it doesn't charge much slower than it does from a wall charger (which is actually pretty slow, almost 3 hrs for a full charge). Still if I do the math to charge 1500 mAh at 3.7V with 5v in 3 hours would take about 370 mA (assuming 100% efficiency, so the actual current draw must be higher).
If anyone knows a more accurate way of determining the current a USB port is supplying, since Device Manager seems to be wrong, that would be interesting information.
What's interesting here is that at 0% the device isn't even on and can't power up to negotiate a higher current draw. If it can't turn on with 100 mA from the charging port it's stuck, which I suspect is the problem here with the Atrix.
USB 3.0 has the potential to charge at 900mah but yes it’s still 5vdc, the phone will not pull more than 500mah unless it detects the data lines are bridged. This is a safety feature so it doesn't blow your usb2.0 ports as the phone wasn’t built with usb 3.0 spec in mind. If you have a 3.0 usb port you can make a fast charge cable with the data lines cut and bridged, make sure you cut them and they aren't still connected to the host side or you might kill your port.
callen81 said:
USB 3.0 has the potential to charge at 900mah but yes it’s still 5vdc, the phone will not pull more than 500mah unless it detects the data lines are bridged. This is a safety feature so it doesn't blow your usb2.0 ports as the phone wasn’t built with usb 3.0 spec in mind. If you have a 3.0 usb port you can make a fast charge cable with the data lines cut and bridged, make sure you cut them and they aren't still connected to the host side or you might kill your port.
Click to expand...
Click to collapse
mA, not mAh
dLo GSR said:
mA, not mAh
Click to expand...
Click to collapse
I'm so used to talking about batteries I guess I left the "h"ours in, haha.
I used ordinary low charge cable to charge my Note 4. Then when I tried to charge it with the original Fast charge cable it wont work any more.
Does this mean that the fast charge cable is not working any more?
Or I need to do something with the setup?
Please advise
zyad1802 said:
I used ordinary low charge cable to charge my Note 4. Then when I tried to charge it with the original Fast charge cable it wont work any more.
Does this mean that the fast charge cable is not working any more?
Or I need to do something with the setup?
Please advise
Click to expand...
Click to collapse
A cable is a cable. There aren't fast charging cables or slow charging cables .... Try to go in Battery settings and reactivate Fast charging
qwertyup88 said:
A cable is a cable. There aren't fast charging cables or slow charging cables .... Try to go in Battery settings and reactivate Fast charging
Click to expand...
Click to collapse
Erm... Not 100 % correct.
Cables DO make a difference. We're trying to transfer at least 2 A of current via thin wires. That needs a specific cross section of the wire; many USB cables use internal wires thin like a human hair, which could cause problems like overheating or simply reducing the charging current, resulting in longer charging durations.
Samsung doen't provide that thick, stiff cable with their high-amperage power supplies without a reason.
So please stick with the cable provided with your power supply; it really is the best choice, keeping you and your Note safe.
And: Nothing wrong with fast charging !
Zyad: Try charging your Note with the original power supply using the original cable, but charge the phone switched off for the first time.
After charging, switch on, use your phone till the battery is down again. Then switch back to fast charging.
Could not have said that better myself.
Hi all,
Have a couple of the dash chargers but only one cable, I've got a tonne of other USB C cables, but anything but the dash cable will only charge slowly, not even normal charging?
Can buy more but seems like a waste.
Is there any risk to using the non dash cables.
Is there a way to force dash charge?
No guesses please, if someone actually knows about this stuff I'd like to hear from you.
Thanks.
dladz said:
Hi all,
Have a couple of the dash chargers but only one cable, I've got a tonne of other USB C cables, but anything but the dash cable will only charge slowly, not even normal charging?
Can buy more but seems like a waste.
Is there any risk to using the non dash cables.
Is there a way to force dash charge?
No guesses please, if someone actually knows about this stuff I'd like to hear from you.
Thanks.
Click to expand...
Click to collapse
My phone still charges normally on a third party USB C cable. There is no risk of damage with normal USB C cables, but I'd go with well reviewed cables and not just any third party solution.
No, you can't force dash charge. Only the provided cable dash charges.
azeem40 said:
My phone still charges normally on a third party USB C cable. There is no risk of damage with normal USB C cables, but I'd go with well reviewed cables and not just any third party solution.
No, you can't force dash charge. Only the provided cable dash charges.
Click to expand...
Click to collapse
Just odd that it always says charging slowly. Even when it's just the cable that's been changed.. Bit crap.
Kernels used to be able to allow quicker charging over USB, might be possible to get more out of the standard non dash cables.
dladz said:
Just odd that it always says charging slowly. Even when it's just the cable that's been changed.. Bit crap.
Kernels used to be able to allow quicker charging over USB, might be possible to get more out of the standard non dash cables.
Click to expand...
Click to collapse
Unfortunately, the USB C on this phone doesn't support USB PD (Power Delivery), so it won't charge faster on the normal cable. I find that strange, since the 2 year old Nexus 5X and 6P had USB PD.
I use a non oneplus usb c charger at bed time and it charges at normal speed since launch and I have had no problems. The only thing that makes it show up charging slowly is if I plug it into my computer. From what I recall the Dash Charge cables have extra pins in them at normal usb to C cables do not.
dladz said:
Hi all,
Have a couple of the dash chargers but only one cable, I've got a tonne of other USB C cables, but anything but the dash cable will only charge slowly, not even normal charging?
Can buy more but seems like a waste.
Is there any risk to using the non dash cables.
Is there a way to force dash charge?
No guesses please, if someone actually knows about this stuff I'd like to hear from you.
Thanks.
Click to expand...
Click to collapse
frigidazzi said:
I use a non oneplus usb c charger at bed time and it charges at normal speed since launch and I have had no problems. The only thing that makes it show up charging slowly is if I plug it into my computer. From what I recall the Dash Charge cables have extra pins in them at normal usb to C cables do not.
Click to expand...
Click to collapse
Apple Mac chargers x2 of them charge slowly, HP elite X2, few others, namely slightly aged Samsung ones, can't think of any that charge normally, different cables.
Even the original dash charger with a different cable charges slowly.