I keep getting this in the aroma installer after i try to flash i.e -
script aborted: assert failed: getprop("ro.product.device") == "GT-S5360"
assert failed: getprop("ro.product.device") == "GT-S5360"
Installer Error (Status 7)
What should I do? Do i have to edit anything in build.prop?
Are you download the zip properly? Try redownload the zip and flash the zip file again
Hit thanks if i helped!
I did :-\ didn't work
are you using cm7? if you are it wont work as the build prop will be totoro not 5360
you would have to rewrite the update script of the kernel zip or flash a stock rom then flash the kernel
Re downloads the zip then flash
You have to flash stock via Odin first.....:good:
marcussmith2626 said:
are you using cm7? if you are it wont work as the build prop will be totoro not 5360
you would have to rewrite the update script of the kernel zip or flash a stock rom then flash the kernel
Click to expand...
Click to collapse
Once again Marcus sir to the rescue
Ok... I'm in evo x.... It showed an error..
I have been trying to flash any cm7 supporting kernel other than percy cm#2.... So I wanted to try this. Thanks sir will flash stock and try
tony_stark_noob said:
Once again Marcus sir to the rescue
Ok... I'm in evo x.... It showed an error..
I have been trying to flash any cm7 supporting kernel other than percy cm#2.... So I wanted to try this. Thanks sir will flash stock and try
Click to expand...
Click to collapse
i cant flash savie kernel too :/// same error
Related
I'm getting error with ClockworkMod v3.0.0.5 when flash roms, before I'm using RA-Tattoo-v1.6.2 and there is no problem with that.Today I try to flash CyanogenMod Gingerbread 2.3.2 RC0 so i installed ClockworkMod v3.0.0.5 from terminal and when try to flash I'm getting this error..
Findind update package..
Opening update package..
Installing update..
assert failed: getprop("ro.product.device") =="click" || getprop("ro.build.product")
"click" || getprop("ro.product.board") == "click"
E:Error in /sdcard/kalim.Ginger.11.2.zip
(status 7)
Installation aborted.
currently i have pancake rom 1.06 on my tattoo
when I try to flash HCDR.ROM_v1.7.zip I'm getting this message
Installing update..
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in android 1.5
It was necessary to remove it when upgrading to ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to creat working update zip packages.
Installation aborted.
*Guys plz tell me is there any solution to install the CyanogenMod Gingerbread 2.3.2 RC0
*If i need to install any other rom do I need to flash RA-Tattoo-v1.6.2 again.
I don't understand you people.
You make a new thread to describe an error which is already discussed and solved on the thread from which you download the rom.
You just need to read the 3-4 last pages to find the answers.
dancer_69 said:
I don't understand you people.
You make a new thread to describe an error which is already discussed and solved on the thread from which you download the rom.
You just need to read the 3-4 last pages to find the answers.
Click to expand...
Click to collapse
sorry my fault i only check the 1st 3-4 pages and the last page.thanks for the reply..
I installed the modded ClockworkMod v3.0.0.5 and now I'm able to flash KalimGinger.11.3 rom.
Hey guys,
i have this rom installed:
http://forum.xda-developers.com/showthread.php?t=917590
If im not wrong, the Kernel version installed is GL_Core_v5b?
Now i want to update it to v11 wich u cn find in this thread:
http://forum.xda-developers.com/showthread.php?t=966786
i download:
Download CWM ZIPs FOR NON TYPHOON ROMS (*series A*)
http://forum.xda-developers.com/show...&postcount=408
put the V_11.zip into the root of my sd and updatet via clockworkmod.
after that the phone is in an boot loop and i get the error: nand kernel open failed.
Wehre is my failure?
You can try again, or maybe the kernel is incompatible with your build. or the kernel zip you downloaded is incomplete/corrupt so you need to redownload and try again. You can try search to see if the kernel has install.bat method and try that method instead if CWM fails.
hi i m trying to update my gt540 from cyanogenmod (swiftdroid v2.0 M4) to cyanogenmod (swiftdroid v2.0 M5).this shows error assert failed: write_raw_image("temp/boot.img","boot") .please help .i m wondering what to do???
This is a known bug with M5. The update has installed, but the boot.img hasn't been flashed. Here is what you need to do.
Extract boot.img from the update .zip file. If you can boot into swiftdroid, use YaffsExpert to flash the boot.img.
Hope it helps,
Jack
JackG256 said:
This is a known bug with M5. The update has installed, but the boot.img hasn't been flashed. Here is what you need to do.
Extract boot.img from the update .zip file. If you can boot into swiftdroid, use YaffsExpert to flash the boot.img.
Hope it helps,
Jack
Click to expand...
Click to collapse
is there a version that already has the fix applied? i tried the one on the main thread that was supposed to be fixed, but it still gave this error msg.
Same problem for me.
I don't think the installation completes since the installation seems to abort before system.img is flashed.
I could always try fastboot but I'd wait for a fix.
No it works fine, it aborted at the boot.img. so just reboot and uses the terminal to complete the update.
are you 100% sure? have you tried it? i don't think the phone will boot if the boot.img is corrupt.
nibras_reeza said:
are you 100% sure? have you tried it? i don't think the phone will boot if the boot.img is corrupt.
Click to expand...
Click to collapse
If you were to look at the updater-script file in the update.zip file, the system partition is modified first. Also, the boot.img isn't corrupt, the update script has an error in it which aborts the boot.img flash. But if you flash the boot.img via fastboot or YaffsExpert, it works perfectly.
Jack
For reference's sake, the issue has been fixed I guess.
SwiftDroid v2.0 M5 Fixed
Recovery:http://swift.kulkoff.com/SwiftDroid_v2.0_recovery_M5.zip
Fastboot:http://swift.kulkoff.com/SwiftDroid_v2.0_fastboot_M5.zip
I've been trying to install the April 7th Nightly of CM 10 on my L7, but the installation aborts on the product check.
Code:
assert failed: getprop("ro.product.device") == "p700" || getprop ("ro.build.product") == "p700"
The phone is a P700, not a 705 or 708 and is currently running the pre-rooted V20a with CWM v6.0.2.8.
Any advice?
Sorry, found out in the meantime that this seems to be a bug in the touch-based CWM.
Eismagier said:
Sorry, found out in the meantime that this seems to be a bug in the touch-based CWM.
Click to expand...
Click to collapse
Had this problem too, just edit the updater-script and remove that specific line.
Download ROM Manager and install the official CWM recovery and then flash CM. Then you won't get any error.
Sent from my GT-I9070 using xda premium
Thanks, I'll keep that in mind for next time. For now, I'm using the non-touch CWM.
PROBLEM FOUND AND FIXED! Answer in Post #3
http://forum.xda-developers.com/showpost.php?p=53784248&postcount=3
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
Writing recovery
set-perm: some changes failed
E:Error in /sdcard/miui_i9500_4.6.20_27061504e7_4.2.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!
Omga4000 said:
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!
Click to expand...
Click to collapse
Use Philz recovery (just flash zip attch in rec) it's something to do with the older binary code-that's why it's status 7 ?
Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
set_perm(0, 0, 0555, "/data/local/tmp/relink");
Click to expand...
Click to collapse
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
package_extract_file("META-INF/com/miui/relink", "/tmp/relink");
set_perm(0, 0, 0555, "/tmp/relink");
run_program("/tmp/relink");
delete("/tmp/relink");
Click to expand...
Click to collapse
Problem solved - clean installation with no errors
Hi Anyone having issue with offline charging in MIUI ROM ?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Omga4000 said:
Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
Problem solved - clean installation with no errors
Click to expand...
Click to collapse
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding
mckalyster said:
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding
Click to expand...
Click to collapse
1) Extract "updater-script" from the ROM file (using winrar for example)
It's located in META_INF > COM > GOOGLE > ANDROID
2) Change the parts I wrote in the previous post
3) paste the "updater-script" file inside the rom
Good luck
i9500 MIUI Flashing Error
After downloading the MIUI ROM, open with winrar and locate the updater-script
\META-INF\com\google\android\updater-script
and remove the first line of code
getprop("ro.product.device") == "ja3g" || getprop("ro.product.device") == "ja3g" || abort("This package is for "ja3g" devices; this is a "" + getprop("ro.product.device") + "".");
save and update from the winrar app.
Try flashing again but disable the zip verification......Done
Big ups to Edwin270
i have installed cwm recovery in my mi4 and forgot which rom i have installd just to update the android version from kitkat to marshmallow(6.0)after installed it converted into completely android phone there is no sign of miui rom so plz tell me how to get it back. even i have tried to installed miui 8 rom bt it showing 'installation aborted' i have tried many times in a differnt way i have tried everything but still i am not able to install zip file that is miui 8 rom. please help anyone wht to do now?
Don't use cwm, use twrp to flash custom roms.