I've been trying to install the April 7th Nightly of CM 10 on my L7, but the installation aborts on the product check.
Code:
assert failed: getprop("ro.product.device") == "p700" || getprop ("ro.build.product") == "p700"
The phone is a P700, not a 705 or 708 and is currently running the pre-rooted V20a with CWM v6.0.2.8.
Any advice?
Sorry, found out in the meantime that this seems to be a bug in the touch-based CWM.
Eismagier said:
Sorry, found out in the meantime that this seems to be a bug in the touch-based CWM.
Click to expand...
Click to collapse
Had this problem too, just edit the updater-script and remove that specific line.
Download ROM Manager and install the official CWM recovery and then flash CM. Then you won't get any error.
Sent from my GT-I9070 using xda premium
Thanks, I'll keep that in mind for next time. For now, I'm using the non-touch CWM.
Related
I'm getting error with ClockworkMod v3.0.0.5 when flash roms, before I'm using RA-Tattoo-v1.6.2 and there is no problem with that.Today I try to flash CyanogenMod Gingerbread 2.3.2 RC0 so i installed ClockworkMod v3.0.0.5 from terminal and when try to flash I'm getting this error..
Findind update package..
Opening update package..
Installing update..
assert failed: getprop("ro.product.device") =="click" || getprop("ro.build.product")
"click" || getprop("ro.product.board") == "click"
E:Error in /sdcard/kalim.Ginger.11.2.zip
(status 7)
Installation aborted.
currently i have pancake rom 1.06 on my tattoo
when I try to flash HCDR.ROM_v1.7.zip I'm getting this message
Installing update..
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in android 1.5
It was necessary to remove it when upgrading to ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to creat working update zip packages.
Installation aborted.
*Guys plz tell me is there any solution to install the CyanogenMod Gingerbread 2.3.2 RC0
*If i need to install any other rom do I need to flash RA-Tattoo-v1.6.2 again.
I don't understand you people.
You make a new thread to describe an error which is already discussed and solved on the thread from which you download the rom.
You just need to read the 3-4 last pages to find the answers.
dancer_69 said:
I don't understand you people.
You make a new thread to describe an error which is already discussed and solved on the thread from which you download the rom.
You just need to read the 3-4 last pages to find the answers.
Click to expand...
Click to collapse
sorry my fault i only check the 1st 3-4 pages and the last page.thanks for the reply..
I installed the modded ClockworkMod v3.0.0.5 and now I'm able to flash KalimGinger.11.3 rom.
Hello, i just bought Nexus S i9020 from Carphone Warehouse UK, and just cant install ICS rooms. in ClockworkMod Recovery 3 it says:
assert failed: get.prop("ro,product.device") == "crespo" || get.prop("ro.build.product") == "crespo"
E:Error in /sdcard/cm_crespo-ota-eng.kalimochoaz.a20.p1.zip
Status 7
This is: [ROM] [i9020/23] CyanogenMod 9 v4.0.3 Alfa 20p1 room
Also tried MIUI: http://miuiandroid.com/2012/01/miui-rom-2-1-6-ics-v4-0-miuiandroid-english-version/
Update: just tried office stable build CM7.1, same...
I searched and found on other forum that this could be wrong device. But how is this possible, i know that it's Nexus S and not Nexus S 4G, and on the back where is SN it says i9020
And when going to ClockworkMod Recovery it takes about 1min to get there? for example booting to bootloader and then going to Recovery, and it loads CWM about 1min maybe longer. I also tried differenced recovery it also takes about 1 min to load, can’t remember how it called but i used Root Guide from this source: http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
I hope some one will know what is the problem. Thank you for your time.
Update your recovery. CWM is on version 5.
Also make sure you are installing via the install zip from SD card method and not the install update.zip
Sent from my Nexus S 4G using xda premium
you need to update your clockworkmod recovery to v5.X.X.X , your version is old.
Fast responce thank you
My device is:
- 183825U
- ThinkPadTablet_A310_02_0039_0086_US I use ThinkPadTablet_A310_02_0039_0086_US_CWR_MOD.zip
- Root
- CWM-based Recovery v5.5.0.4
I download the ThinkPadTablet_A310_02_0039_0089_US.zip try install by CWM
Show this:
assert failed: getprop("ro.product.device") ++ "Indigo" || getprop("ro.bluid.product") == "Indigo"
E:Error in /sdcard/ThinkPadTablet_A310_02_0039_0089_US.zip
(Status 7)
Instalattion aborted
I think you have to edit the update script. There is a thread in the general section.
One question: are you US, WE, or ROW? You have to use Device specific rom.
Moved To General
This is a development section, its not for questions
why not just flash stock recovery to udpate?
rangercaptain said:
I think you have to edit the update script. There is a thread in the general section.
One question: are you US, WE, or ROW? You have to use Device specific rom.
Click to expand...
Click to collapse
Hi rangercaptain,
I've the same problem but I use ROW ROM. Could you please advise where can I find the mentioned update script?
emerson - you've updated to 0086 using a tweaked update that works with CWM Recovery as well as skips checking for a few specifics.
You can now use the next tweaked update to get you all the way to 0089/OTA2.5 - since you tried with the official Lenovo update, it failed. Use this one:
ThinkPadTablet_A310_02_0039_0089_US_CWR.zip
pwstein said:
emerson - you've updated to 0086 using a tweaked update that works with CWM Recovery as well as skips checking for a few specifics.
You can now use the next tweaked update to get you all the way to 0089/OTA2.5 - since you tried with the official Lenovo update, it failed. Use this one:
ThinkPadTablet_A310_02_0039_0089_US_CWR.zip
Click to expand...
Click to collapse
This work.
PROBLEM FOUND AND FIXED! Answer in Post #3
http://forum.xda-developers.com/showpost.php?p=53784248&postcount=3
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
Writing recovery
set-perm: some changes failed
E:Error in /sdcard/miui_i9500_4.6.20_27061504e7_4.2.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!
Omga4000 said:
Hey guys
I've been trying to install MIUI for hours, using both CWM or TWRP, and I'm always receiving the same error message:
I've flashed CM without a problem, and an original stock ROM as well.
Why is MIUI giving me a hard time?
**I already followed this guide: http://en.miui.com/thread-13226-1-1.html**
Thank you!
Click to expand...
Click to collapse
Use Philz recovery (just flash zip attch in rec) it's something to do with the older binary code-that's why it's status 7 ?
Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
set_perm(0, 0, 0555, "/data/local/tmp/relink");
Click to expand...
Click to collapse
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
package_extract_file("META-INF/com/miui/relink", "/tmp/relink");
set_perm(0, 0, 0555, "/tmp/relink");
run_program("/tmp/relink");
delete("/tmp/relink");
Click to expand...
Click to collapse
Problem solved - clean installation with no errors
Hi Anyone having issue with offline charging in MIUI ROM ?
Sent from my GT-I9500 using XDA Premium 4 mobile app
Omga4000 said:
Well, after deciding to fix this problem once and for all, I added a "ui_print" after
every (well not every) line, to see exactly where is the installation failing.
The discovery? It fails at:
The solution?
Change all "/data/local/tmp/relink" into "/tmp/relink" like so:
Problem solved - clean installation with no errors
Click to expand...
Click to collapse
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding
mckalyster said:
Hi! sorry
Please how can I clearly follow your guide I'm Noob and dont really know about this. So can you please guide me with a step by step.
Thanks for understanding
Click to expand...
Click to collapse
1) Extract "updater-script" from the ROM file (using winrar for example)
It's located in META_INF > COM > GOOGLE > ANDROID
2) Change the parts I wrote in the previous post
3) paste the "updater-script" file inside the rom
Good luck
i9500 MIUI Flashing Error
After downloading the MIUI ROM, open with winrar and locate the updater-script
\META-INF\com\google\android\updater-script
and remove the first line of code
getprop("ro.product.device") == "ja3g" || getprop("ro.product.device") == "ja3g" || abort("This package is for "ja3g" devices; this is a "" + getprop("ro.product.device") + "".");
save and update from the winrar app.
Try flashing again but disable the zip verification......Done
Big ups to Edwin270
i have installed cwm recovery in my mi4 and forgot which rom i have installd just to update the android version from kitkat to marshmallow(6.0)after installed it converted into completely android phone there is no sign of miui rom so plz tell me how to get it back. even i have tried to installed miui 8 rom bt it showing 'installation aborted' i have tried many times in a differnt way i have tried everything but still i am not able to install zip file that is miui 8 rom. please help anyone wht to do now?
Don't use cwm, use twrp to flash custom roms.
Hello, I'm bringing the Official Marshmallow ROM for desire 816 (dual sim) a5_dug and it's pre-rooted and (all credits goes to (xXminiWHOOPERxX)) and how to intall the OTA updates after flashing the ROM
Rom Information:
Code:
Android OS : 6.0
Kernel : Stock
Sense Version : 7.0
Release Keys : 3.12.401.2 release-keys
Download Link: Mega.nz
How to Install the flashable zip using TWRP recovery:
1. place the flashable zip (Sense7-MarshMallow.3.12.401.2_DualDesire816.zip) on the sd card.
2. wipe the cache, dalvik cache, system, data and internal storage (if you don't have any data on your phone).
3. install Sense7-MarshMallow.3.12.401.2_DualDesire816.zip through the install option in TWRP Recovery.
4. reboot the phone when the installer finishes and everything should be fine.
Now you can't install the OTA update with the custom recovery, and even if you reverted back to stock recovery it won't work, so you have to follow the following instructions to install the OTA update on your custom recovery.
How to Install the OTA update
1. download the OTA update from your phone from
Code:
Settings > About > Software Update
, after it finishes the flashable zip of the update should be located in
Code:
data/data/com.htc.updater/cache/
or
Code:
data/data/com.htc.updater/files/
2. it should be something similar to
Code:
OTA_A5_DUG_M60_DESIRE_SENSE70_MR_HTC_Region_3.21.xxx.x_R-3.12.401.2_release_479056hu4q3r1wkhz4b5n3
3. copy it to your pc and extract the zip file.
4. navigate to
Code:
/META-INF/com/google/android
5. you should find a file named
Code:
update-script
, open it with notepad or sublime text or any code editor you use.
6. from line 4 to 9 you should see the following code
Code:
getprop("ro.build.fingerprint") == "htc/htc_europe/htc_a5dug:6.0/MRA58K/698282.2:user/release-keys" ||
getprop("ro.build.fingerprint") == "htc/htc_europe/htc_a5dug:6.0/MRA58K/748385.1:user/release-keys" ||
abort("Package expects build fingerprint of htc/htc_europe/htc_a5dug:6.0/MRA58K/698282.2:user/release-keys or htc/htc_europe/htc_a5dug:6.0/MRA58K/748385.1:user/release-keys; this device has " + getprop("ro.build.fingerprint") + ".");
getprop("ro.product.device") == "htc_a5dug" || abort("This package is for \"htc_a5dug\" devices; this is a \"" + getprop("ro.product.device") + "\".");
replace it with the following:
Code:
#getprop("ro.build.fingerprint") == "htc/htc_europe/htc_a5dug:6.0/MRA58K/698282.2:user/release-keys" ||
# getprop("ro.build.fingerprint") == "htc/htc_europe/htc_a5dug:6.0/MRA58K/748385.1:user/release-keys" ||
# abort("Package expects build fingerprint of htc/htc_europe/htc_a5dug:6.0/MRA58K/698282.2:user/release-keys or htc/htc_europe/htc_a5dug:6.0/MRA58K/748385.1:user/release-keys; this device has " + getprop("ro.build.fingerprint") + ".");
getprop("ro.product.device") == "a5" || abort("This package is for \"a5\" devices; this is a \"" + getprop("ro.product.device") + "\".");
7. save the file with no extension as it is and re-zip the archive using winzip or whatever tool you use to compress as (zip).
8. flash the OTA zip file you made using TWRP or any custom recovery.
Click to expand...
Click to collapse
I've uploaded the modified update-script file just in case you couldn't do this steps so you just have to replace the modified update-script with the original one in the OTA zip file.
Download: update-script
thank you sooo much !!!
but what is ota update and what it use for ?!
Echtar said:
thank you sooo much !!!
but what is ota update and what it use for ?!
Click to expand...
Click to collapse
OTA updates are the software updates you recieve from the phone manufacturer, typically you can't install an OTA update while your phone is rooted so this is the only way to install it.
can you upload OTA + script here?
file get error
i m getting error to flash the ota update file... ?
"/system/bin/app_procss32" has unexpected contents.
the ota wont install. it's still reporting expected device error.
i mean "this is meant for ....."
thanks
guys pelase help my htc 816 dug
wifi not working it on off and i can get it on !!
Echtar said:
guys pelase help my htc 816 dug
wifi not working it on off and i can get it on !!
Click to expand...
Click to collapse
We are on the same boat bro! Did u update to MM from Kitkat? This update is for lollipop users apparently. We are having driver issues..
rohinraj said:
We are on the same boat bro! Did u update to MM from Kitkat? This update is for lollipop users apparently. We are having driver issues..
Click to expand...
Click to collapse
I went back to kitkat 4.4.2. Try this https://forum.xda-developers.com/desire-816/development/26-nov-svhd-v1-0-0-t2953661
this ROM worked for me. And its great!! Wifi works and everything is back to normal.
omartek0 said:
Hello, I'm bringing the Official Marshmallow ROM for desire 816 (dual sim) a5_dug and it's pre-rooted and (all credits goes to (xXminiWHOOPERxX)) and how to intall the OTA updates after flashing the ROM
Rom Information:
Code:
Android OS : 6.0
Kernel : Stock
Sense Version : 7.0
Release Keys : 3.12.401.2 release-keys
Download Link: Mega.nz
I've uploaded the modified update-script file just in case you couldn't do this steps so you just have to replace the modified update-script with the original one in the OTA zip file.
Download: update-script
Click to expand...
Click to collapse
i have made all steps but when i replace update-script and rezip ota folder and put it back on sdcard to flash it
and when i click install zip on cwm it says installation aborted
i tried with TWRP but also not working !!
i am on cm13 can i flash this rom ? from twrp like normal ?
me too on cm13 how can i install this rom pls help
Hi
First thank you
I did all what you said but when i chose to flash Rom zip file from sd
Its stars checking and its begins then gives me install
aborted i dont know why??, can you help me with it to go to the next level to update ota??
I have a question
I bought a cell phone in the US a few years ago, it was blocked by the SPRINT operator, I stayed a long time without using it, and now I decided that I would pack it to use it. I unlocked the bootloader and also the root, put a custom rom but the device is still blocked.
Is there any way to unlock this?
(I'm in Brazil)
.....................
after install cant update ota say mound read-only
what must do?