Related
I recently updated my Galaxy S4 (i9500) to Android 4.3 [MJ5] using Kies. The phone is completly stock and non-rooted. After the update, I'm unable to pull down notification bar. However, after I restart the device, it works well for some time and then again refuses to be pulled down.
Has anyone else experienced the same problem? I have lot of data on the device that will be difficult to restore and hence and donot want to format the phone. Any suggestions/solutions that might resolve the problem?
Also, after the 4.3 update, when I check for OTA, a popup shows saying "Your device has been modified. Software updates are not available." Pulling out and reinserting SD card didn't solve the issue.
Same problem. .. No solution yet.
arpit88 said:
I recently updated my Galaxy S4 (i9500) to Android 4.3 [MJ5] using Kies. The phone is completly stock and non-rooted. After the update, I'm unable to pull down notification bar. However, after I restart the device, it works well for some time and then again refuses to be pulled down.
Has anyone else experienced the same problem? I have lot of data on the device that will be difficult to restore and hence and donot want to format the phone. Any suggestions/solutions that might resolve the problem?
Also, after the 4.3 update, when I check for OTA, a popup shows saying "Your device has been modified. Software updates are not available." Pulling out and reinserting SD card didn't solve the issue.
Click to expand...
Click to collapse
I am going mentally insane trying to figure this out. I have refreshed and wiped my phone 5 times for the same issue, but to nothing good. The notification bar simply wouldn't want to respond.
What's getting to my nerves is that in one of my experiments with solving this issue, I kept my phone as stock with no third party apps, and still faced the issue. I kept knox uninstalled thinking that's what is causing the issue, but that's didn't help. I did lots of these kind of attempts, but to no avail. I'm concluding that is a serious Bug that Samsung is not going to address to soon. And we're simply screwed until.
Same problem.. DEAL BREAKER
I am facing the same problem after update to 4.3 Andrew this is a deal breaker if Samsung does not fix immediately. Thinking of rooting Andrew moving to cyanogen mod beta.. This is crazy. Nobody tested this for sure.
4.3 official update notification panel drop down problem
I have same problem with this update.can anybody solve this problem ?
kish0007 said:
I am going mentally insane trying to figure this out. I have refreshed and wiped my phone 5 times for the same issue, but to nothing good. The notification bar simply wouldn't want to respond.
What's getting to my nerves is that in one of my experiments with solving this issue, I kept my phone as stock with no third party apps, and still faced the issue. I kept knox uninstalled thinking that's what is causing the issue, but that's didn't help. I did lots of these kind of attempts, but to no avail. I'm concluding that is a serious Bug that Samsung is not going to address to soon. And we're simply screwed until.
Click to expand...
Click to collapse
Is your device status showing as "CUSTOM" or "ORIGINAL"?
figured out temporary solution
After a lot of playing around, I seem to know what's causing the problem. It's the Phone (Dialer) application that is creating an issue.
when the problem arises again, try making a call, and while the call is being placed, pull down the notification bar....It begins working.
obv I Ousby this is no permanent solution, but will help you from needing to restart.
If anyone with deeper knowledge can PLEASE look at what from the inside is causing it, and how can we make a permanent fix, much appreciated.
let me know if it works for you, the temp fix.
---------- Post added at 09:03 AM ---------- Previous post was at 08:55 AM ----------
[/QUOTE=arpit88;46809031]Is your device status showing as "CUSTOM" or "ORIGINAL"?[/QUOTE]
Mine says official, for you, I'd suggesting finding the correct 4.3 version with the correct region for your i9500 / i9505, and redo the firmware. Download the firmware off Sammobile, and use Odin 1.85 whilst your phone is in download mode. If you don't know any of these terms used, Google it. It'll be helpful.
Basically, the notification bar problem and device modified problem are separate issues.
Did u install the indian firmware or the unknown one?
yes boys same issue here after 4.3 installed
also my notification bar when its stacked works when you try it on a call but its a temporary solution. mine is official also. anybody find a permanent solution? should we again root 4.3 on 4.3? I think it must be that the 4.3 was installed over 4.2.2 maybe if we make hard reset it will be fixed?
It's the Indian firmware, that I downloaded using Kies but still it started showing as "custom".
I took the phone to samsung care, they said Official 4.3 isn't released for s4 in India yet. Lolz. However, then one of there geeky employees reinstalled the 4.3 update and now my both issues have been fixed. Notification bar is now working perfectly fine and Device status is now Official.
official 4.3 also problem task bar
mine is official because in germany 4.3 is released on samsungs update and my phone is from germany. sould I take it to samsung service and they reinstalling again 4.3 is finally fixed?
xxuemj8
I got an ota update xxuemj8 just now that seemingly has solved the problem. My test so far hasn't given complaints, but.let's see what's the situation in long term.
Indian version i9500 currently updated from xxuemj5 to xxuemj8
Should solve all your problems too if you refresh your phone with Odin. Meaning reinstall from fresh by downloading from sammobile and.installing.through Odin
UPDATE XXUEMJ8 doesnt help
Update: XXUEMJ8 doesnt solve any problem. The bug still exists, notification bar stops working.
Also, another issue is that under Settings > Battery, even if Wi-Fi is switched off, the wifi blue bar shows full all the time as if it were ON.
This confuses me to if this is only a software bug in displaying the battery status of settings where wifi is truly off, and it thinks it is on.
OR
Wifi remains on throughout, and switching it off in the software doesnt actually switch it off, eventually taking more battery.
kish0007 said:
I got an ota update xxuemj8 just now that seemingly has solved the problem. My test so far hasn't given complaints, but.let's see what's the situation in long term.
Indian version i9500 currently updated from xxuemj5 to xxuemj8
Should solve all your problems too if you refresh your phone with Odin. Meaning reinstall from fresh by downloading from sammobile and.installing.through Odin
Click to expand...
Click to collapse
Android 4.3 Update
I DEFINITELY AGREE with the earlier post by Kish0007. The bug is related to the PHONE (Dialer) App. The problem always occurs after receiving a phone call.
I changed from German Android 4.3 to Unknown Android 4.3 as posted on Sammobile hoping for the problem to disappear. But it did not !
Mich
The possible solution is to format your phone after installing 4.3 upgrade.
Goto Hard reset by pressing your Volume Key+Power key+Home Key......
Then goto Wipe data/Factory reset.........Don't worry your android Upgrade will not be reset, it will be as it is (4.3)....just it will format your data
and cache.
Do not forget to take backup of apps and your other data......!!
It worked for me & hope it will work for you as well........!!
I try format several times but problem still exist
update the firmware before format.
After upgrading your OS , please update the firmware from PDA:MJ5 to PDA:MJ8 also,
then try formatting.
Same problem after updating on my Samsung S4
Same problem after updating on my Samsung S4.
I have the Middle east version UAE. MJ5 build number currently.
i noticed the dialor was started this issue.
i hope there is a solution for this soon.
still issue after hard reset
Sid0406 said:
The possible solution is to format your phone after installing 4.3 upgrade.
Goto Hard reset by pressing your Volume Key+Power key+Home Key......
Then goto Wipe data/Factory reset.........Don't worry your android Upgrade will not be reset, it will be as it is (4.3)....just it will format your data
and cache.
Do not forget to take backup of apps and your other data......!!
It worked for me & hope it will work for you as well........!!
Click to expand...
Click to collapse
I made hard reset on my phone and tha issue still exists. from samsung service they told me its possible the viber on 4.3 that makes the problem so I unistall it I made hard reset but I still have stacked tool bar sometimes after receiving or making calls but no so often.
notification bar problem
I updated my s4 i9500 to 4.3 indian ver. INU mj5 via kies and recently MJ8.. and same problem happening to me... notification bar would not pull down on call ends... calling again fixes the problem but thats kind of annoying every time for fix..... even transition animation scale resets on opening camera app.... then I thought to give a clean install via odin on same firmware from sammobile... ie. INU MJ8 21 oct build.... but this even did not solve the above problems. .. I also uninstalled viber thinking it might be the cause.... factory reset... cache wipe ... everything but to no avail.... any permanent fix would be appreciated. ...
Phone Settings
Guys,
Do you have the phone setting answer call using the power button selected ? Please, let me know. My notification bar never crashed today after I un-selected this option.
Thanks,
Mich
Hi everyone, I'll try to keep this as concise and clear as possible. Thanks in advanced for reading this.
Phone: SGS4
Running: Android 4.3
Carrier: Bell Canada
Rooted: No
Rom: Stock TouchWiz.
Problem: The phone will not turn on WiFi or Bluetooth. If you attempt to switch either on, it remains a dim green for a few seconds and then turns back off shortly after.
Solutions tried:
(a) Battery pull.
- Unsuccessful. (At first, if battery pulled during Samsung logo animation after restarting from ON state, both WiFi/Bluetooth would turn on again, sometimes for minutes, sometimes hours. Eventually, this stopped working. It would only work on a restart pulling the battery during the animation, never at any other time)
(b) Update to latest firmware through Samsung Kies.
- Unsuccessful.
(c) Boot into safe mode to see if any applications were the cause.
- Unsuccessful.
(d) Wipe device clean and start fresh.
- Unsuccessful.
(e) Change WiFi power saving state to off through *#0011# menu.
- Unsuccessful.
I have not tried loading other roms or kernels.
A quick google search shows that many people have the same problem, I have yet to find a working solution. If anyone here can point me in the right direction, I'm willing to pay at this point. I cannot return it to Samsung as there is a crack on the screen which has voided the warranty. I could fix the screen and try sending it in but I'm hoping for a software solution.
I feel as if it is not a hardware issue as the battery pulls worked initially.
Any input would be greatly appreciated. Once again, I'm willing to pay for a working solution, the number is up to you as long as it is reasonable.
Wexberg said:
Hi everyone, I'll try to keep this as concise and clear as possible. Thanks in advanced for reading this.
Phone: SGS4
Running: Android 4.3
Carrier: Bell Canada
Rooted: No
Rom: Stock TouchWiz.
Problem: The phone will not turn on WiFi or Bluetooth. If you attempt to switch either on, it remains a dim green for a few seconds and then turns back off shortly after.
Solutions tried:
(a) Battery pull.
- Unsuccessful. (At first, if battery pulled during Samsung logo animation after restarting from ON state, both WiFi/Bluetooth would turn on again, sometimes for minutes, sometimes hours. Eventually, this stopped working. It would only work on a restart pulling the battery during the animation, never at any other time)
(b) Update to latest firmware through Samsung Kies.
- Unsuccessful.
(c) Boot into safe mode to see if any applications were the cause.
- Unsuccessful.
(d) Wipe device clean and start fresh.
- Unsuccessful.
(e) Change WiFi power saving state to off through *#0011# menu.
- Unsuccessful.
I have not tried loading other roms or kernels.
A quick google search shows that many people have the same problem, I have yet to find a working solution. If anyone here can point me in the right direction, I'm willing to pay at this point. I cannot return it to Samsung as there is a crack on the screen which has voided the warranty. I could fix the screen and try sending it in but I'm hoping for a software solution.
I feel as if it is not a hardware issue as the battery pulls worked initially.
Any input would be greatly appreciated. Once again, I'm willing to pay for a working solution, the number is up to you as long as it is reasonable.
Click to expand...
Click to collapse
When you say wipe device clean, how did you do that? Did you use ODIN and flash the firmware or just do a factory reset?
DeadlySin9 said:
When you say wipe device clean, how did you do that? Did you use ODIN and flash the firmware or just do a factory reset?
Click to expand...
Click to collapse
I did not use ODIN, I did a simple factory reset. I will try that ASAP and post an update. If there any other solutions as well, I would really appreciate them in case that does not do the trick.
Thank you for your response DeadlySin, it is greatly appreciated.
Wexberg said:
I did not use ODIN, I did a simple factory reset. I will try that ASAP and post an update. If there any other solutions as well, I would really appreciate them in case that does not do the trick.
Thank you for your response DeadlySin, it is greatly appreciated.
Click to expand...
Click to collapse
Just try that first, as doing a factory reset does not actually change the system files but rather wipes all userdata. Just use the file for whatever firmware you have in the I337m firmwares thread.
DeadlySin9,
I finally got around to using odin to reset the firmware, first to stock 4.3 from my carrier, then 4.2, both of which still failed to change the state of the problem. At this point, it seems like an obvious hardware problem but if that was true, I still can't understand why I could re-initiate WiFi/Bluetooth after a specific pattern of battery pulls (this does not work anymore but worked for awhile, stopped, then started again, now finally stopped). Any last ideas? I really appreciate your help.
DeadlySin9 said:
Just try that first, as doing a factory reset does not actually change the system files but rather wipes all userdata. Just use the file for whatever firmware you have in the I337m firmwares thread.
Click to expand...
Click to collapse
Wexberg said:
DeadlySin9,
I finally got around to using odin to reset the firmware, first to stock 4.3 from my carrier, then 4.2, both of which still failed to change the state of the problem. At this point, it seems like an obvious hardware problem but if that was true, I still can't understand why I could re-initiate WiFi/Bluetooth after a specific pattern of battery pulls (this does not work anymore but worked for awhile, stopped, then started again, now finally stopped). Any last ideas? I really appreciate your help.
Click to expand...
Click to collapse
I don't know why that would work. At this point I'm not sure what else you could do. I know I used to have WiFi issues after some flashes with my Inspire but i never really had a fix even then.
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Been there, done that.
It's not a hardware problem. It is, I believe, problems with the restrictive 4.3 update not playing nicely with some system settings. In short your system drivers or configuration settings are getting messed up to to bugs in how Knox and the bootloader are interacting with the modem.
I had your exact symptoms after installing certain custom ROMs, also noted that the problem could be temporarily "fixed" if the boot process was interrupted or by specific sequences of modem changes. The situation is not helped by Bell being more restrictive than other Canadian carriers e.g. Rogers, something that also caused me problems when I was enabling AWS on a Bell firmware.
The effective solution was to install a custom recovery to facilitate a complete wipe of files, then flash a Rogers stock image. Cured. And continuing to work properly if subsequently returned to a Bell stock image. Although, frankly you'd have a more stable and flexible platform if you you kept the Rogers image in the end. If the build properties edit doesn't solve your issue, then here is a path for you to pursue.
.
1/2 Lit Toggles - build.prop editing issue
Amb669 said:
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Click to expand...
Click to collapse
I have the exact same problem - I'm on US AT&T, I337UCUAMF3, Android 4.2.2 and this solution looks promising. I followed the steps and have RW set up, but ro.securestorage.support does not exist in my build.prop file. Does anyone know if this property is specific to certain builds and/or if there is an equivalent property?
jrwebdev17 said:
I have the exact same problem - I'm on US AT&T, I337UCUAMF3, Android 4.2.2 and this solution looks promising. I followed the steps and have RW set up, but ro.securestorage.support does not exist in my build.prop file. Does anyone know if this property is specific to certain builds and/or if there is an equivalent property?
Click to expand...
Click to collapse
Adding it to the end shouldn't hurt as long as you make sure you set properties on the build.prop
DeadlySin9 said:
Adding it to the end shouldn't hurt as long as you make sure you set properties on the build.prop
Click to expand...
Click to collapse
Thanks for the tip, good to know it wouldn't screw anything up. I did add it to the build.prop file, rebooted and it seems to have had no effect. Seems that if the property is not present in the file, adding it does not resolve the problem.
Editing build.prop is a plausible workaround if the OP has root access. If he doesn't wish to root his phone, then he can clean up his system configuration by reinstalling as I described earlier in the thread without requiring root. Two approaches to the same result.
And yes, you can add the entry if it doesn't already exist in your configuration.
.
jrwebdev17 said:
Thanks for the tip, good to know it wouldn't screw anything up. I did add it to the build.prop file, rebooted and it seems to have had no effect. Seems that if the property is not present in the file, adding it does not resolve the problem.
Click to expand...
Click to collapse
UPDATE: I didn't have any luck using the build.prop fix, nor with the wpa_supplicant.conf fix that some of you may have seen mentioned. I ended up Recovering to stock MF3, (I was already on MF3). This gave up my root access, and I didn't take any additional steps to hide busy_box or anything like that, after my MF3 recovery it looked like I was safely unrooted and I contacted AT&T support via web-chat, and they asked some questions and sent me to a nearby AT&T device center. I took it there, they didn't ask a single question about how it happened, whether I had rooted it, etc(although I was paranoid that there would be traces left behind and they would turn me away). Long story short, they replaced the phone no questions asked!
In my opinion it would seem that while this problem could in some cases be caused by rooting and tinkering, it's enough of a known issue to AT&T that they would replace it under warranty. Hopefully Bell or other carriers would do the same. My advice is to try your carrier, particularly if you are with AT&T.
Just to help people who are searching for a solution. I had flashed a T-Mobile rom and my wifi stopped being togglable on my AT&T S4. That is, I couldn't turn on wifi. The button would get stuck on. After trying to flash what I thought was the right MK2 modem and still having the same issue, I thought I was out of luck. However, I found this one here: http://forum.xda-developers.com/devdb/project/dl/?id=3275 and hit paydirt. Flashing it using Safestrap and then wiping cache and delvik worked. The file is called jflteatt-MK2-modules.zip.
Only for WIFI, for me what worked was I had to open a litte bit the one side of the phone and close it again (removing a little the plastic, like if you were going to open the device) Wifi started working again, no need to flash any roms, it seemed to be something related with pressure, humidity or something inside the phone.
Regarding bluetooh I had no luck still not working, only keeps saying activating and never gets activated.
does anyone find a solution for this yet?
I have had the same issue for months. Started after warranty was up. I have AT&T on nc1. I tried everything mentioned here but nothing worked. Even left it with the phone repair guys for a week with no luck. It first started after I flashed Hyperdrive ROM. A reboot helped for a while. It actually came back for a week on Kevp's ROM, but then had an error that reboot the phone and lost it again. Phone is now on Craigslist and I am back to my S2. On a high note it's nice to not have a unlocked bootloader again.
you need to flash the exact same model/firmware's modem file atleast thrice before giving up.... i have a simalar issue the thing is my model number is 1377z and google doesnt have a working flashable modem file for it so basically i am screwed too wifi calling and video recording doesnt work....
update :: saw that you got it replaced !!
smoooth .....
Amb669 said:
i had issues enabling wifi after installing a custom kernel & with certain roms (same 1/2 lit green toggle crap, sometimes it would toggle back off sometimes it would just stay 1/2 lit and make my phone burn)
my solution has been 100% working for myself so far, if you'd like to try it here's the directions
1. install es file explorer
2. set root permissions AND mount as writable, within es file explorer
3. use es file explorer to navigate to the root of your phone (system directory, i think) and open the build.prop file than select the es file editor
4. find the line that says ro.securestorage.support=true and edit it to false, save and close
5. reboot phone, and hopfully you have no more wifi issues
i was skeptical when i first did this because nothing worked to fix my wifi, but this works 100% for me on every rom
Click to expand...
Click to collapse
Just tried this on my sgh-i337m that was having the same wifi issues after rooting and flashing a kernel. Rebooted and wifi is up and running. So far so good. Thanks a lot!
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Matt.graham said:
Hello,
I recently rooted my sgs4 gt-i9505 to the goolge edition using a YoTube tutorial on how to do so. Everything worked fine at the start but when I tried to install the PAC man rom, it jus stayed in the loading screen.
I restarted and tried rebooting but to no avail. I went back into the recovery mode and wiped the phone (divlac, cashes and system) then I reinstalled the google rom to find my wifi was not working. I tried the same process again, wipe- reinstall. Now I can't receive calls, the wifi doesn't work, home button only works on double tap, pull down status bar works but nothing in displayed.
My question is, does anyone have any ideas on how I would return my device to normal or know a full proof recovery and rom I can use that will correct these problems.
I am in the UK if that makes any difference.
Thanks for all and any help.
Matt
Click to expand...
Click to collapse
You could try to go back to stock and check if everything still works there.
Did you flash the correct modem/baseband for the ROM / your carrier? There is a thread in general for all the modems. Chances are with a KitKat ROM you need to update your modem. Read that thread and give it a go. The file is about 15mb and takes a minute to flash in Odin. Failing that go back to stock.
Nothing in status bar: that's what it looks like in stock, you can use 2 fingers for the quick settins. Installl WANAM XPOSED fromwork for more tweaks and options!!
Home button double tap: that's the way it works on the google edition, that's just it. BUT wanam xposed can change this with the Gravity Box module!! You could try the Echoe 2.2 kitkat rom it has xposed pre-installed.
Keep in mind things look blanker and less functional as you no longer have samsung touchwiz which adds a LOT of stuff to the stock experience!
One more thing: ALWAYS make a nandroid backup before flashing ANYTHING at all, you never know when you will need it. Backup the nandroid to your PC also just in case, things go missing/ get deleted! T
Hi, I never root my phone or flash a custom ROM.
The problems was started when I flashed a new ROM from sammobile of another country, my phone comes with 4.2 and I flashed a 4.3.
I flashed newer ROM from only Vodafone-Spain (only those really are my official supplier), and then I update ever with Samsung KIES, (no Knox counter)
So, with Andorid 4.3 I had more problems than now with 4.4, now the only problem is with WIFI
I can use normally, with screen ON, the problem is when sleep for a long time (more than 1 hour) when I touch a button I see the unlock screen, but does not seem to work the touch screen, and screen go off after a seconds, if I touch other button the screen don't go on. And then, after aprox 30s it reboot itself, and show a window telling that the Process System is not responding, do you want to close?, and two buttons, close or wait.
I tried to start my phone in Secure Mode and I have the same problem, so it is not an app, it is the ROM.
I do at least 2 Factory Reset, but the problem is still there.
I think it is a software problem and not a hardware problem, because the problem start when I update to Android 4.3
I tried the trick WIFI Power save Mode OFF (on dialer, *#0011# -> WIFI -> Power save mode OFF) and never reboot automatically, so the problem I think it is with this power save mode. But if I turn off, when WIFI is ON, the battery drain fast.
In the samsung shop they tell me that first will format my phone to see if the problem solve and try for a time, if not solve, then I have to send by mail... and I will not send it because I know the time it will take to repair it is about 1-2 months and I need the phone for my work.
So is there another solution or something to try?
Napalm Candy said:
So is there another solution or something to try?
Click to expand...
Click to collapse
Try reflashing the Firmware once again mate and Here you can follow the tutorial from here
Repulsa said:
Try reflashing the Firmware once again mate and Here you can follow the tutorial from here
Click to expand...
Click to collapse
Since the first ROM (4.2) I flashed 3 or 4 ROMs from SamMobile, so I am not very optimistic. But I don't lost nothing, I will try it
I flash again the ROM, and after 2 days testing, the problem is still there.
Any other thing to try before send to samsung?
Please, give me another idea to try. I really have a problem with WIFI
This is how Wifi (some times) drain my battery when are not connected to a network. But the problem is worst when is connected, because it freeze and reboot.
Hello! You could fix the problem? I took suffering the same problem as your months, and I have not been solved, I'm for kicking the **** mobile! As may give so many problems with the wifi?
regards
manguila said:
Hello! You could fix the problem? I took suffering the same problem as your months, and I have not been solved, I'm for kicking the **** mobile! As may give so many problems with the wifi?
regards
Click to expand...
Click to collapse
Yes I solve. So.. I don't solve it, it solve it self. One day I saw that I don't had wifi connection, then I saw that I don't any WIFI names stored, all was erased automatically, I don't know how.
But the result it, I don't have anymore a freeze or a reboot because wifi. ALL, absolute ALL run fine now. I had a lot of WIFI names stored, about 30-50, maybe this was the problem, a conflict with some of these names, but I'm not sure
No one update, reflash, factory reset, or start in safe mode was solve any problem, the problem solve it self... very strange.
If you try a factory reset, then don't restore all your mobile config. Try to install all apps manually, one by one. I ever restored my backuped config, and I think this was the problem.
Hope you can solve it
Napalm Candy said:
Yes I solve. So.. I don't solve it, it solve it self. One day I saw that I don't had wifi connection, then I saw that I don't any WIFI names stored, all was erased automatically, I don't know how.
But the result it, I don't have anymore a freeze or a reboot because wifi. ALL, absolute ALL run fine now. I had a lot of WIFI names stored, about 30-50, maybe this was the problem, a conflict with some of these names, but I'm not sure
No one update, reflash, factory reset, or start in safe mode was solve any problem, the problem solve it self... very strange.
If you try a factory reset, then don't restore all your mobile config. Try to install all apps manually, one by one. I ever restored my backuped config, and I think this was the problem.
Hope you can solve it
Click to expand...
Click to collapse
Thank you very much for answering so quickly.
Happens to me exactly what you do, but seems to have no solution.
I have tried more than 8 roms, stock or mods, and always fails.
At first I thought it would issue the modem or kernel, but after many tests, I do not ****ing know what is causing the problem.
I'm running out of solutions, anyway thanks for telling your case...
I'm glad that in the end one way or another, you have it fixed.
:good:
manguila said:
Thank you very much for answering so quickly.
Happens to me exactly what you do, but seems to have no solution.
I have tried more than 8 roms, stock or mods, and always fails.
At first I thought it would issue the modem or kernel, but after many tests, I do not ****ing know what is causing the problem.
I'm running out of solutions, anyway thanks for telling your case...
I'm glad that in the end one way or another, you have it fixed.
:good:
Click to expand...
Click to collapse
What happens when you fully wipe, flash a 4.4.2 rom, don't restore anything, not even your google account and don't install any apps.
Lennyz1988 said:
What happens when you fully wipe, flash a 4.4.2 rom, don't restore anything, not even your google account and don't install any apps.
Click to expand...
Click to collapse
Thanks for your interest! The truth is that it is very strange ...
If I remember correctly, already try what you mention me, but I kept going ... It's like at some point something had happened which change roms not seem to solve..
I'm considering installing a rom with 4 files and pit file, but do not know if this will help in something
Let's see if I can come up with the bug because it is becoming a pain in the ass
:good:
I would try what say Lenny1988. So the only change before solution and after solution, was a big crash on WIFi drivers/app/modem (don't sure) it self, and was deleted all my stored wifi access points that I had. It was a problem related to Wifi power save, if I disabled it then I had no reboots/freezes.
So, I would try a factory wipe and DON'T restore anything, and try for a couple days. If work, then you know a way to solve it.
Tell us if it works.
Hello there! I will update with the latest news!
I tried the recommended advice, but no luck...Not seem to affect him leave without restoring.
The only thing that seems to work and keep it running, is to disable wifi power saving system
you know....
Code:
1. Go to your phone dialer
2. Dial *#0011#
3. When you see the "ServiceMode" screen, press the left menu button
4. Select "WiFi"
5. See that "Wifi Power Save Mode" button that is "ON" - well turn it "OFF"
But this way drain your battery much faster,so it does not seem a good solution to the problem.
Curiously, the same phone, some people suffer this problem and others do not....
It may be hardware? or software?
If I find something, I'll note here.
Regards
Hey guys,
I have a Galaxy S4 (i9500). I installed Omega ROM v22 on it and everything went smoothly, Wifi & BT working perfectly.
After a few hours of using the device (nothing special at all, texts and stuff like that) - I noticed my wifi isn't working and by not working I mean that I click the wi-fi button and it changes from gray to the mid-state between gray to green for around 20 seconds before it goes back to green ago.
If I open the menu to see my networks it just says "Enabling" without any networks there.
I had to drive somewhere so I went to my car and tried to enable Bluetooth, and same thing happens there - Bluetooth will not turn on and will stay stuck on mid-state between gray and green for a while and go back to green.
I flashed omega rom v22 again and the problem was gone, or so I thought. I went back to the car for another drive and realized the bluetooth issue is back - and when I got home I realized the wifi issue is back as well.
I figured I need to reset everything so I tried the following:
Full wipe (including dalvik and even including "internal SD card") and then flashing stock rom (from the official website, stock rom of my country).
The issue was back after a few hours. I do not have BT or Wifi access. Yesterday Wifi suddenly started working for a few hours but then it stopped working again.
I really need help! I have no idea what to do with this issue!
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Lennyz1988 said:
Well rule number one when you have problems after flashing without wipe.
1. perform a full wipe and see if the problem persists.
Click to expand...
Click to collapse
Tried that, no luck.
What else would you try?
In some places when people had problems with Wi-Fi they said to flash a different kernel but I don't see why I would have this specific issue with Omega Rom and why the default kernel with it wont work well?
Maybe this could be a root issue? My root works fine but I have this weird gut feeling like this is some permissions thing that's going on.
I'm trying to think why it would work right after the wipe but then stop working shortly after.
Another symptom: It randomly started working for a few minutes and then stopped again (around three hours ago).
Any idea what's going on?
Well, if you fully wiped and didn't restore any apps and settings then it can be two other things.
Or it's a bug in the rom or a hardware failure in your phone.
I would suggest trying a different rom first. Do not restore anything, not even your google account.
wi-fi fix?
Do you actually have an i9505? or is it a canadian or att version? if its the latter sometimes the devs offer some wifi-fixes, also try a different kernel. otherwise it could be that your radio/modem are not compatible with the version of the ROM you are flashing.
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
morhsn said:
Tried arrow ROM and this issue doesn't seem to happen in this rom. Hope it stays like that...
Click to expand...
Click to collapse
Sadly, it did happen with this rom, after just a few hours.
I'm now using stock rom and still suffering from the issue.
Does anyone have ANY idea what I can do to fix this?
Thanks in advance!