Related
So, a fairly straightforward idea here (i think).
I "retired" my Inc after getting my rezound, but have kept it charged and up to date. I have always kept it as a backup, and is currently running Kang^3 CM9.
With that said, i had (what i think) was a great idea for putting it to use. The wife and I love road trips and camping, and having plenty of tunes/movies for the trip & destination is very nice. Normally, we just bring the ipod, but (seeing as i love to repurpose things), i came up with this idea:
The Inc will get as large of an SD card as it can hold, and it will get all our movies and songs, and be a DLNA server.
Here is the problem (perhaps my actual question). While i can try to wire my truck up with a wifi router (have one spare), I would love to use my phone's native tethering ability.. but, i am not too sure if any apps actually work with it (ie, if the router is the server, will other clients actually pick up the server?
The end goal, is for my Inc to provide music/movies to my nook, Touchpad, etc on demand, however i do it. Open to all suggestions.
Divine_Madcat said:
So, a fairly straightforward idea here (i think).
I "retired" my Inc after getting my rezound, but have kept it charged and up to date. I have always kept it as a backup, and is currently running Kang^3 CM9.
With that said, i had (what i think) was a great idea for putting it to use. The wife and I love road trips and camping, and having plenty of tunes/movies for the trip & destination is very nice. Normally, we just bring the ipod, but (seeing as i love to repurpose things), i came up with this idea:
The Inc will get as large of an SD card as it can hold, and it will get all our movies and songs, and be a DLNA server.
Here is the problem (perhaps my actual question). While i can try to wire my truck up with a wifi router (have one spare), I would love to use my phone's native tethering ability.. but, i am not too sure if any apps actually work with it (ie, if the router is the server, will other clients actually pick up the server?
The end goal, is for my Inc to provide music/movies to my nook, Touchpad, etc on demand, however i do it. Open to all suggestions.
Click to expand...
Click to collapse
Double twist, it serves as a DLNA server.
Send your media to the wifi router and if you can connect your wifi to something to sync to - TV or laptop. You can use all media.
Although if your using a laptop then I'd suggest using usb storage.
I could be misunderstanding the question too..
But the market is a good place to check, there is a ton of media server apps.
Sent from my ADR6300 using Tapatalk 2
I am sorry, but you completely missed the question. (Though, i wouldn't mind having a TV in my truck... )
I want this for roadtrips... my inc has a huge SD card, and i want to be able to share the media on it to my nook, touchpad, ipad, etc. This will be on the road (not home), and will need to be simple and mobile.
Well I know sense 3.5 and 3.0 allow to send media to other devices with a connected media feature it has.
Double twist should do this though..
Sent from my ADR6300 using Tapatalk 2
I plan on primarily using it for XBMC. The support looks good, along with the price and specs. What do you guys think?
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
As someone who had never used XBMC or Plex (or anything else like that for that matter) prior to this past month, I am so excited about how well XBMC works with the OUYA!
You sound like someone who has used it before. If you're familiar with the basics then getting the OUYA to run XBMC in (almost) flawless 1080p is...well...easy! With the release of an official version of XBMCHUB last week, I don't think I'll ever hook my laptop up to my TV again.
Going into the OUYA, I had no idea of it's potential as a do-all media center. I was hoping it'd have Netflix and flash content, but that's about as far as I had hoped, so I'm very excited about all of this.
At only $99, I've been hearing people say there is no better box for XBMC, but maybe other, more experienced people could chime in.
EDIT/ADDITION:
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
I personally bought the ouya strictly for XBMC. I've used xbmc streaming from smb shares since original Xbox and it was called Xbox media center. I still use original Xbox with xbmc and the ouya is its replacement. Xbmc works amazingly better on it even in its alpha state. Those guys are pros and I have every faith they will deliver on the android platform. The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet. Perhaps in the future it will. I've set my ouya to boot directly into xbmc but like above poster said the USB support needs work and the issue with the ouya turning itself on when its asleep and not shut down. That's annoying. Also don't plan to use WiFi. Ouyas metal casing hinders WiFi too much for streaming video in decent quality.
JLCollier2005 said:
EDIT/ADDITION:
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
Click to expand...
Click to collapse
I have a 2TB WD drive and a 3TB Toshiba drive, both using external power. With either of them if I plug in the drive light comes on and blinks but the OUYA doesn't mount it no matter how long I wait. One is formatted as FAT32, the other as NTFS. It makes no difference.
The workaround I've found (don't remember where I saw this originally) is to plug in the drive while the OUYA is powered off and unplugged, then do a system reset. After this, the external drive is recognized and mounted as /usbdrive and the light on the drive only flashes when being read from or written to. I can install XBMC, scan my movies and shows into the library, use the external drive for my emulator roms, etc, etc. It works.
The problem is if I remove the drive for any reason or if I get an update the drive is no longer recognized and I need to do another system reset again, add back all my games, reinstall XBMC and rescan my library (import doesn't seem to work for me) and hope that I don't have to deal with another system update any time soon....
That's why I'm not currently recommending the OUYA if people plan to use an external hard drive to access their media. I'm not the only one with these issues, if you Google for OUYA and external drive you'll see many others are having the same issues.
Sent from my Nook HD+ using Tapatalk HD
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Using the XAF edition while I wait for Gotham to become stable for android. Works amazingly well.
Sent from my SGH-I317M using Tapatalk 2
Does Dolby digital and dts work with this?
Sent from my Nexus 4 using Tapatalk 2
wouwout said:
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Click to expand...
Click to collapse
Yeah, I read about that. Is that a limitation that can be fixed with development, or is it impossible?
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
just got my Ouya yesterday and I had xbmc with the 0.6 release installed and the xbmchub fusion wizard thing installed. The issues I have encountered are typing on that xbmc keyboard with only the touchpad is a very arduous experience. Navi-x is installed alongside all the 1 channel stuff but this has a script error but does not stop it from working.
It does crash in navi-x but the speed at which this thing boots up and restarts is rapid so it does not cause that much of a headache, but dont forget that this info comes from less than 24 hours usage.
Overal i am happy with this device and the xbmc install but i would like a easier way of starting the software similar to netflix on the apple tv as the kids can play what they like and not get on my back.
Skater4599 said:
...The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet...
Click to expand...
Click to collapse
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
binome- said:
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
Click to expand...
Click to collapse
I'm talking an IR remote that can turn the console on/off as well... I have the android app remote working just fine. the official one even.
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Click to expand...
Click to collapse
Perhaps, but so far the OUYA has been the only Android device I've not felt a need to root and I'd like to keep it that way. Maybe it's just an artificial distinction, but to my mind if I have to root to get basic functionality then the OUYA ceases to be a console (plug and play) and becomes a small computer. If I'm to treat the OUYA as a small computer then I may as well simply run Cyanogen Mod and not waste any money with the OUYA games, because I'll be too busy mapping the game pad to play the many titles available in the Play Store. It becomes a silly, pointless waste of time and money, because I have several desktops which I can use on my television and had in the past been running XBMC just fine on those desktops with my 5.1 surround sound card and speakers.
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
I'd say yes.
I've got XBMC running on a load of devices, Raspberry Pi, Pivos Xios DS, Odroid U2, Nexus 7, HTC One X, Intel i5 w/ATI 7770... The RPi and Pivos are sluggish, the Odroid very buggy, the Nexus, One X and Ouya (all tegra 3) are very usable and provide nearly as smooth an experience as the powerful PC.
There are a few bugs still being ironed out but none are show stoppers. The current libstagefright build works nicely enough and will only get better. We should have an interim 12.2 build hit the Ouya store soon which will be mostly bug free and feature complete.
For remote the controller is ok and will be better when they finish key mapping it. You can also connect the ps3 bluetooth media remote which makes for a better experience. Other options are IR remotes that present as keyboards or the FLIRC device.
The main thing to bare in mind is that the Ouya is a pretty new device with lots of development being done every day, something like 10 OS updates in the past 4 months - give the devs time and we'll have a very nice little Tegra 3 box; I'm looking forward to seeing where we'll be in 6 months time. Not to mention the work being done on XBMCs side. A lot of core devs are working on supporting the Ouya as they all have the device.
Sent from my Nexus 7 using Tapatalk 2
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
Click to expand...
Click to collapse
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
bornagainpenguin said:
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
Click to expand...
Click to collapse
You can't blame the lack of XBMC support on Ouya, it was up to the XBMC team to follow through on that. Ouya only announced it was going to come to the Ouya because that's what XBMC said on their own website. They're finally working on an Ouya fork for the next XBMC release, probably integrating libstagefright into it (because those work best on the Ouya).
And you could've gone for one of those other boxes. They're around the same price as an Ouya. I was a KS backer but I supported it hoping, yet not expecting, some ROM dev support for the console. I know there's CM10 but I'm going to wait for better unlocking of the system before I go full custom ROM. Unless the custom ROMs have better overscan compensation support already (a huge issue with Ouya on my TV).
Zehrfox said:
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
Click to expand...
Click to collapse
1) I don't use network shares on my XBMC Ouya setup right now. All video files are stored locally to the external hard drive I have connected to my Ouya.
2 & 3) I actually couldn't get the Sick Beard Android app to load on the Ouya. I ended up buying an app called PowerNZB which came with its own Sick Beard server. It's just not as automated right now as it would be on PC when used in conjunction with SabNZBd and I hope to see that change soon. I don't know if I can talk about what 'web sources' I use openly either, but you can figure it out. Also I'll just bluntly tell you to Google Sick Beard tutorials to get a better idea of how to use it.
4 & 5) No clue. I don't have any of these on my Ouya at all. Sorry if I'm not as much help as you'd like.
NssOne said:
You can't blame the lack of XBMC support on Ouya
Click to expand...
Click to collapse
I don't.
As far as I'm concerned, XBMC has already produced a build for the OUYA which works quite well and which I expect to continue to get better and better. Instead I blame OUYA for being unable to (or unwilling?) to fix USB drive detection.
Sent from my Nook HD+ using Tapatalk HD
I appreciate the help
* at NssOne - Thanks, I do appreciate the help I wanted to use the network shares, that way I could have my win7 pc obtain all the shows and movies for me, using PC software, then place it on a shared network drive, where the Ouya could access them and play them. I figured that would be easier that having the Ouya run all that software and handle all those processes.
Which version of XBMC works best on Ouya, I saw several people post different versions, I know you need HW accel, but an exact file name or link would be appreciated.
Is Sick Beard better than Coach Potato? - I have never used either one? will they look for new shows and grab them for me?
Any one else trying to replace Cable TV with Ouya and XBMC? - Any advise, tips, software suggestions?
For XBMC Google the libstagefright version. And I don't know the difference between Sick Beard and Couch Potato. I've stuck with Sick Beard the whole time.
Hello everyone,
I am attempting to set up a Tronsmart MK908II TV dongle as a portable sandbox and web development environment. For my first attempt I'm using the stock ROM and apps from the app store such as Bit Web Server and Terminal IDE. I've had a fair amount of success, though very tempted to install Pi****u (Ubuntu) for a more powerful environment.
One of my main objectives have a miniature HD monitor so I can have direct access to the device if necessary even when I'm on the go. Before I go out and buy a suitable device for this, I'm trying to get my Nexus 7 to act as the display, since I will always have it with me and it's the perfect size. I believe I may have all the necessary cables and converters to make something like this possible... I'm just a bit stuck at the moment on getting it all to work as I want and I suspect its a software/config/capabilities limitation more than a physical one. I have already attempted this a couple of different ways, including using a USB cable from the dongle and an OTG converter for my Nexus 7, but could not get the Android USB Serial Monitor Lite app to recognize input from the dongle.
Does anyone know of any tools or knowledge that might help me achieve this? I can probably find an app that will allow me to remote control my dongle from my Nexus, which is plan B, but it's far less desirable since there are some circumstances that a purely software solution might not work from the dongle end.
Thank you for your time!
Tennyson Hull
Hello there peeps!
Im thinking of getting rid of my old laptop as my torrentbox/Kodi and fileserver. Its noisy, draws lots of power and it can barely handle 1080p HEVC movies. So Im really longing to buy a Nvidia Shield TV 16GB
Im thinking of buying the 16GB version, putting a 128GB micro-sd card in it and use a powered usb3.0 HUB to connect my current 3 external HDDs to it.
My plans is to let the 128GB micro-sd card act as the torrent partition and storage for the games and apps. When the apps are finished Im moving the stuff to the three external NTFS HDDs and store it on them. All this would be nice to be able to manage with my Android phone. Im thinking that it might be hard on the unit to handle torrents at the same time we watch movies or play games. Is there an app to paus the torrents if the rest needs more resources, or make some kind of script?
Will all this work? Ive read that the Shield TV cant handle more than two external USBs thanks to the limitatons of Android but this can be fixed by rooting it. Is it correct?
You need to get a SMB server app working on it. Google: Funkyfresh Samba
uTorrent has an Android version.
I think Android can handle more than two ext HDD's. My sister has 4-5 HDD's connected to her AFTV, same with my cousin. Try StickMount.
I don't know but I think it's going to be hard to do what you want. I'd buy an Asus ChromeBox, put Win10 on it and use that for Kodi MySQL server, torrent, media, etc.
Ive been curious about this, when you say your sister had 4-5 HDDs connected to AFTV, im assuming she has them connected via some sort of usb hub?
I wouldn't use an SD card for long-term torrenting as they're not very good at handling frequent writing.
hobs0n said:
Hello there peeps!
Im thinking of getting rid of my old laptop as my torrentbox/Kodi and fileserver. Its noisy, draws lots of power and it can barely handle 1080p HEVC movies. So Im really longing to buy a Nvidia Shield TV 16GB
Im thinking of buying the 16GB version, putting a 128GB micro-sd card in it and use a powered usb3.0 HUB to connect my current 3 external HDDs to it.
My plans is to let the 128GB micro-sd card act as the torrent partition and storage for the games and apps. When the apps are finished Im moving the stuff to the three external NTFS HDDs and store it on them. All this would be nice to be able to manage with my Android phone. Im thinking that it might be hard on the unit to handle torrents at the same time we watch movies or play games. Is there an app to paus the torrents if the rest needs more resources, or make some kind of script?
Will all this work? Ive read that the Shield TV cant handle more than two external USBs thanks to the limitatons of Android but this can be fixed by rooting it. Is it correct?
Click to expand...
Click to collapse
So heres my experience so far: Currently I have 1 external usb 3.0 HDD connected to my shield tv. using an android app called servers ultimate pro, I was able to create multiple file servers. The nice thing is that shield tv is already low powered, but can even go into sleep mode and still run the server (i have a feeling sleep mode just turns off the screen). with servers ultimate, you can get lots of configuration options, limiting the amount of users, ip addresses that can access, you can set up basic rules, and notifications for things like if the server stops or starts, to email, text, pop up a notification, etc. Its pretty nice.
But heres the catch: I've been searching for a solution for over a month now, but transfer rates are slow im getting 5-10MBps on average, but i know the network is capable of more. after searching, it seems to be a limitation of either android, or the protocols the app is using. Another user on here pointed out to me that the SMB protocol for instance, seems to be running SMB v1 (which is already up to like V3- or V4, which are more feature rich and capable of much faster speeds)
then theres the issue of what devices will be accessing it. So far, ive tried my android phone, my windows 10 PC, and an iphone. the android phone can see the servers just fine when configured properly, iphone didn't seem to want to work without any sort of specialized app (which honestly i didn't even try after that point), and windows 10 works, but if you want to map a network drive, your going to need the SMB protocol, and even then it took several weeks of google searching until several tweaks, registry settings, etc finally allowed windows 10 to see my server.
I don't torrent, so unfortunately can't help you on that front, but like another user pointed out, using the sd card will just wear out the amount of times it can read/write. if it does work out for your needs, why not just save directly to the external HDDs?
For the record, I was able to stream using things like kodi or another media player, but i do notice that any initial loading takes several seconds. for example, initial playback will take several seconds to load, but once the video plays, it plays smooth and doesnt stutter or pause, UNLESS i were to try fast forwarding or skipping to another section, then the video takes several seconds again. this all works for my personal needs (for now) but other users might want more demand.
hope any of this helps.
unvaluablespace said:
Ive been curious about this, when you say your sister had 4-5 HDDs connected to AFTV, im assuming she has them connected via some sort of usb hub?
Click to expand...
Click to collapse
Yea, both my sister and cousin have the 10 port USB 2.0 hub from Amazon working fine on their Amazon Fire TV's.
Cool, thats good to know. I've been kind of curious about this for in the future (i don't see myself using more than 4 HDD's for whatever server setup i use) Hopefully the shield wont have an issue with this, either. Now just trying to figure out my transfer speed issue. lol
Thank you very much for the experience and help!
This certainly learned me very valuable points
what is the point of putting a server on shield tv?
can you download torrents directly to the shield (hd)?
and would plex be able to see these files?
I have personally done exactly what you are looking for with one of my shield boxes. I installed a Linux chroot on my shield tv (I ended up flashing foll android as it was easier), installed transmission-cli in there, and ran kodi on top then enabled media sharing, and put an ssh server on the machine. Works fantastically.
what does this all enable to do?
This is pretty close to my plans, minus the torrent box and fileserver.
my plan is to load up my new external drive and copy everything from my laptop and existing externals into one location (so I can eliminate duplicates) and then move it to the SHIELD TV and setup KODI so it sees all my files and use it for playback (I can always routinely plan file transfers to it manually thru the USB and computer when I need to add new content), but it would be nice to be able to access the external over the network if possible.
kdb424 said:
I have personally done exactly what you are looking for with one of my shield boxes. I installed a Linux chroot on my shield tv (I ended up flashing foll android as it was easier), installed transmission-cli in there, and ran kodi on top then enabled media sharing, and put an ssh server on the machine. Works fantastically.
Click to expand...
Click to collapse
Uhm so you are running some kind of Linux or what is foll Android?
unvaluablespace said:
So heres my experience so far: Currently I have 1 external usb 3.0 HDD connected to my shield tv. using an android app called servers ultimate pro, I was able to create multiple file servers. The nice thing is that shield tv is already low powered, but can even go into sleep mode and still run the server (i have a feeling sleep mode just turns off the screen). with servers ultimate, you can get lots of configuration options, limiting the amount of users, ip addresses that can access, you can set up basic rules, and notifications for things like if the server stops or starts, to email, text, pop up a notification, etc. Its pretty nice.
But heres the catch: I've been searching for a solution for over a month now, but transfer rates are slow im getting 5-10MBps on average, but i know the network is capable of more. after searching, it seems to be a limitation of either android, or the protocols the app is using. Another user on here pointed out to me that the SMB protocol for instance, seems to be running SMB v1 (which is already up to like V3- or V4, which are more feature rich and capable of much faster speeds)
then theres the issue of what devices will be accessing it. So far, ive tried my android phone, my windows 10 PC, and an iphone. the android phone can see the servers just fine when configured properly, iphone didn't seem to want to work without any sort of specialized app (which honestly i didn't even try after that point), and windows 10 works, but if you want to map a network drive, your going to need the SMB protocol, and even then it took several weeks of google searching until several tweaks, registry settings, etc finally allowed windows 10 to see my server.
I don't torrent, so unfortunately can't help you on that front, but like another user pointed out, using the sd card will just wear out the amount of times it can read/write. if it does work out for your needs, why not just save directly to the external HDDs?
For the record, I was able to stream using things like kodi or another media player, but i do notice that any initial loading takes several seconds. for example, initial playback will take several seconds to load, but once the video plays, it plays smooth and doesnt stutter or pause, UNLESS i were to try fast forwarding or skipping to another section, then the video takes several seconds again. this all works for my personal needs (for now) but other users might want more demand.
hope any of this helps.
Click to expand...
Click to collapse
Thanks for the all the valuable info!
Using the Shield TV as a torrentbox/fileserver/NAS is only temporary until I can afford a real NAS, or preferably get a mini Linux box running as a VPN server and router but that's in the future, in fact Shield tv is also in the future since I can't afford it now =)
But back to your comments, I checked out Ultimate Pro and it seems it's dead but maybe some of its servers works good Regarding SMB I'm thinking of getting another app for SMB sharing.
Another thing I'm wondering is the multitasking abilities of the Shield TV, sure it's by far the most powerful Android TV box but how can it handle torrenting, SMB sharing, running Kodi at the same time? Or do you have to manually manage it? Or get some apps that let you set up certain priorities? And will it be able to game on the Shield while Kodi/SMB/torrents running in the background?
hobs0n said:
Thanks for the all the valuable info!
Using the Shield TV as a torrentbox/fileserver/NAS is only temporary until I can afford a real NAS, or preferably get a mini Linux box running as a VPN server and router but that's in the future, in fact Shield tv is also in the future since I can't afford it now =)
But back to your comments, I checked out Ultimate Pro and it seems it's dead but maybe some of its servers works good Regarding SMB I'm thinking of getting another app for SMB sharing.
Another thing I'm wondering is the multitasking abilities of the Shield TV, sure it's by far the most powerful Android TV box but how can it handle torrenting, SMB sharing, running Kodi at the same time? Or do you have to manually manage it? Or get some apps that let you set up certain priorities? And will it be able to game on the Shield while Kodi/SMB/torrents running in the background?
Click to expand...
Click to collapse
I don't torrent, so unfortunately I can't help you there, but I have tried using my file server in multiple ways: file transfers & streaming video, while running another app, even streaming games. Here are a few examples of things i've tried:
file transferring a big file to my pc, while gamestreaming on the nvidia shield tv at the same time (worked great. I saw no issues during this time)
file transferring a big file to my pc, while running a local app such as netflix, emulators, youtube, (as you can see i tried both maximizing bandwidth, while even testing lag with cpu intensive tasks. again, worked great)
streaming a 1080p movie from the shield tv, to my pc, while gamestreaming from the same pc, back to the shield tv (seemed to work fine. honestly didnt test this for extended period.)
streaming a 1080p movie from the shield tv to my pc, while running local apps on shield tv such as netflix, emulators, youtube, etc (once again, seemed to work fine)
So as you can see, the shield tv seemed to handle everything i threw at it rather well. i even tried multiple apps for multitasking on the shield and i just honestly did not see any performance hints with the media server, aside from anything youd normally expect on the shield tv. keep in mind i am running on a gigabit ethernet network, wired on both ends, from the shield tv to the router, and router to the pc.
my only issue with it all is as mentioned before: transfer speeds are just barely fast enough, even though i know my network and the device is capable of much faster speeds, but the cpu and ram on the shield tv seemed to handle everything i tried rather well.
as for your comment about trying other smb apps, ive gone through several, and the ones i was able to manage to get working, all ended up with the same speeds as with ultimate servers pro. :\ If you can find something that gives you faster speeds, i would love to hear about it so i can try it. i tried ftp server, smb server, webdav server, etc and all seem to max out at about the same speed.
Thanks for your reply!
It really seems the Shield is awesome and powerful to handle multitasking! I'm longing to get my own!
Crappy about the SMB speeds, let's find solutions to that problems
Hm I havent found any real data on the speed between a computer and an Android device when it comes to SMB...
When I transfer between my old gaming laptop from the external usb2.0 HDDs to my Xperia Z3, I get between 700KB/s to 1100KB/s.
The laptop is connected with Ethernet cable to the Netgear CG3799 router and the Z3 is connected with full connection on 802.11N 5Ghz. Altho the laptop is pretty sweaty atm, its converting old DVDs to HEVC and downloading around 15 torrents
Ill compare speeds later when the laptop isnt as busy
What kind of speeds do you peeps get when transfering between Android devices other devices?
Which Samba app are you using?
Hey folks,
I'm trying the same now. Had an Odroid XU4 as file and MySQL Server and try to replace it for an all in one Shield TV Solution.
I'm running a rooted Shield with SambaDroid for the SMB Share which works fine. And KSWEB Server for MySQL and ftp.
Sometimes it seems like the apps are closing in the background, I don't know why, seems to be a android multitadking problem to free up RAM.
But my biggest problem is the transfer speeds. No matter what protocoll (smb/ftp) I'm not getting more then 8 MB/s read out of the box. I tried to read from internal memory, sdcard and my external HDD. All came out with the same speed connected over GBit LAN to my PC.
Write side it much faster with 20 MB/s what I do not really understand but you need root to write to external memory like sdcard or usb.
So far it works, but it is less then optimal compared to my Ordoid XU4 what did 80MB/s but has no HDMI 2.0 output :/
Maybe Android 6.0 brings more speed for the network because It has to be bottlenecked somewhere in the OS, FTP and SMB showing the same speeds.
What's funny is I was actually doing the reverse of what you're doing. I got my Shield as an Android media center device since my Odroid U2 never seemed up to my standards with Kodi. When HardKernel came out with the XU4 I scooped it up and made it my webserver, after seeing an Android TV rom out for it, I flashed it and now Kodi's UI will lag like crazy after about a half hour of usage.
Sent from my Pixel C using Tapatalk
Hello,
I want to buy a Raspberry Pi for use it as a mini home server because it does not produce song and do not take up much space.
Her low electricity consumption is interesting.
But it is reliable to run 24h / 24h without any risk of overheating?
think you.
AbA2L said:
Hello,
I want to buy a Raspberry Pi for use it as a mini home server because it does not produce song and do not take up much space.
Her low electricity consumption is interesting.
But it is reliable to run 24h / 24h without any risk of overheating?
think you.
Click to expand...
Click to collapse
I bought a case with a GPIO fan on it and it works pretty well. I leave it running almost constantly and have had no issues. I even overclock it and I own the B+
thank's guy going to get then!
Yes but you need an external HD. MicroSD only for boot.
for now i just want use a USB key.
calner said:
Yes but you need an external HD. MicroSD only for boot.
Click to expand...
Click to collapse
but since you talked about, is it possible to have an e-SATA port on a Raspberry Pi 3?
AbA2L said:
for now i just want use a USB key.
but since you talked about, is it possible to have an e-SATA port on a Raspberry Pi 3?
Click to expand...
Click to collapse
Possible? Yep. I'm pretty sure they make eSata to USB adapters online. As long as drivers were compatible and the drives were receiving enough power, it might just work. Just don't count on getting lightning fast transfer speeds due to the limitation of USB 2.0.
there are rasberry pi copies that come with a SATA port.
Rather than hack a pi into a home server. why no use one of the pi clones that comes with a sata port built in?
Something like the // I can't post urls I'm new to this forum.
It's $49 but you would spend that hacking a rasberry pi.
Sheri Blonde
Just so you know I have a Pi2 running RetroPie, NextCloud, DNS Ad Blocker, OpenVPN Server, Backup Server and a couple of simple PHP Websites for monitoring my other servers all inside a Pimironi Pibow Case non-stop 24/7/365 since Feb 2015 without issue
As suggested above I boot from a 1Gb MicrosSD card and the main OS and storage is kept on a 750Gb USB drive.
As for how much electricty it uses ... next to nothing compared to the tumble dryer which is the biggest drain in our house even with the 2 ESXi Servers (Q8300/8Gb RAM/2Tb SATA) running in the loft (I'm a software developer by profession)
It's one of the best purchases I've made (hardware wise) in a long time
tgellen said:
Just so you know I have a Pi2 running RetroPie, NextCloud, DNS Ad Blocker, OpenVPN Server, Backup Server and a couple of simple PHP Websites for monitoring my other servers all inside a Pimironi Pibow Case non-stop 24/7/365 since Feb 2015 without issue
As suggested above I boot from a 1Gb MicrosSD card and the main OS and storage is kept on a 750Gb USB drive.
As for how much electricty it uses ... next to nothing compared to the tumble dryer which is the biggest drain in our house even with the 2 ESXi Servers (Q8300/8Gb RAM/2Tb SATA) running in the loft (I'm a software developer by profession)
It's one of the best purchases I've made (hardware wise) in a long time
Click to expand...
Click to collapse
Have you done this much on the zero?
demonaxe said:
Have you done this much on the zero?
Click to expand...
Click to collapse
Haven't bought a zero yet but now that you mention it I must buy one and try.
Saying that the biggest load on my Pi2 is when syncing lots of data to Nextcloud so if you only have a handful of users, I.e. spouse and family etc, I honestly don't see why not..
My take on rpi2.
Running xbian 24/7 connected to TV in living room.
OpenVPN server running in background of Kodi head end.
High load means streaming TV series and/or movies for few hours straight. If not video then mostly online radio.
Simple plastic case - no additional heat sinks or other more fancy cooling system. Highest temp I saw on it was around 65-68*C.
Rebooted only when scheduled apt-get upgrade finds it necessary.
Thanks!!