[Q] G2 stuck - G2 Q&A, Help & Troubleshooting

Hello,
So i wanted to install Cyanogenmod on my phone, i rooted it and installed CWM on the phone. Then i went to recovery mode and tried to install Cyanogenmod. The install failed and then i did something stupid, i cleared the system files. Now the phone wont boot ofcourse, i can get in download mode but then it is stuck at firmware upgrade. But its stuck at 'firmware upgrade' at 0%. On the bottom it says 'B43' and 'ROOTED'.
The computers says at device manager that it is connected but i cant acces the files.
What can i do to let the phone work again?
Its the D802

Nobody?
Nobody knows how to fix?

U said u installed cwm and rebooted to recovery and install cwm again I don't understand what's the current status of the phone.
Sent from my LG-D800 using xda app-developers app

lingarajug said:
U said u installed cwm and rebooted to recovery and install cwm again I don't understand what's the current status of the phone.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
My phone wont start again. I wanted Cyanogenmod on it but install failed. Everytime i clicked reboot it went to CWM. Then i tried some things and i deleted /system (stupid). Now there is no data or anything on the phone. If i connect the phone to my pc it shows that it is connected but i cant drop any files in the phone.
I can start download mode but it says updating software for like 2hours and it stays at 0%.
So i can only open recovery mode and download mode. also adb tells me that there is no phone connected when it is.

It means you don't have correct drivers in pc does cwm have sideload and can u access it.
Sent from my LG-D800 using xda app-developers app

lingarajug said:
It means you don't have correct drivers in pc does cwm have sideload and can u access it.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
i have all the correct drivers, before this all happened the connection between pc and mobile were good.
I have sideload but i can't acces it.
Do you have a link to other drivers that can be it?

Ok if u can access sideload may be it can be fixed lg stock drivers don't seem to help pc recognise your phone in sideload mode so install an app called pdanet in pc and while phone is connected to pc in sideload mode open adb in ur pc and u already said adb is not seeing ur phone. So open pdanet and install lg drivers through it and then reboot ur phone back into sideload while it is not connected and then connect back to pc and run adb commands(pdanet in ur pc will notify that u connected ur lg phone at least that's how I fixed mine a month ago
Sent from my LG-D800 using xda app-developers app
---------- Post added at 01:47 PM ---------- Previous post was at 01:43 PM ----------
Sorry I did not see clearly that u can't access sideload can u at least access terminal
Sent from my LG-D800 using xda app-developers app

lingarajug said:
Ok if u can access sideload may be it can be fixed lg stock drivers don't seem to help pc recognise your phone in sideload mode so install an app called pdanet in pc and while phone is connected to pc in sideload mode open adb in ur pc and u already said adb is not seeing ur phone. So open pdanet and install lg drivers through it and then reboot ur phone back into sideload while it is not connected and then connect back to pc and run adb commands(pdanet in ur pc will notify that u connected ur lg phone at least that's how I fixed mine a month ago
Sent from my LG-D800 using xda app-developers app
---------- Post added at 01:47 PM ---------- Previous post was at 01:43 PM ----------
Sorry I did not see clearly that u can't access sideload can u at least access terminal
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I can acces the terminal on pc with adb.

No I am talking about terminal in ur phone recovery like the one twrp has.
Sent from my LG-D800 using xda app-developers app

lingarajug said:
No I am talking about terminal in ur phone recovery like the one twrp has.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I don't see a terminal in CWM.

What's the message when u try using sideload and can u push twrp to ur phone using sideload.
Sent from my LG-D800 using xda app-developers app

lingarajug said:
What's the message when u try using sideload and can u push twrp to ur phone using sideload.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
My phone says: sideload started... now send the pachage you want to apply to the new device with "adb sideload <filename>",.,..
My pc says that there is no device connected and if i try to push it tells me that.

So u can use sideload in ur phone I thought u said u can't access sideload anyways install pdanet in ur pc and reconnect phone in sideload mode and then open pdanet and install lg drivers through options and use adb in ur pc then it did for me
Sent from my LG-D800 using xda app-developers app

lingarajug said:
So u can use sideload in ur phone I thought u said u can't access sideload anyways install pdanet in ur pc and reconnect phone in sideload mode and then open pdanet and install lg drivers through options and use adb in ur pc then it did for me
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I can open sideload on my phone but the connection with my pc isnt there. My pc tells me there is no device connected and i can not sideload items to the phone.
After opening pdanet it says no phone detected and it closed.

Maybe try restarting phone into recovery while while connected to pc and see if that helps
Sent from my LG-D800 using xda app-developers app

lingarajug said:
Maybe try restarting phone into recovery while while connected to pc and see if that helps
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
Tried it a few times now but does not work.
I think i have to go to the store tomorrow.

In ur device manager in pc does it say pdanet broadband adapter
Sent from my LG-D800 using xda app-developers app

lingarajug said:
In ur device manager in pc does it say pdanet broadband adapter
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
yes it does say that

Also go to pdanet.co to download the correct version and in settings enable connect automatically when plugged in.
Sent from my LG-D800 using xda app-developers app

linkuj ist
lingarajug said:
Also go to pdanet.co to download the correct version and in settings enable connect automatically when plugged in.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
when i connect the phone it says HTC Sync error = -1

Related

[Q] No drivers after ROOT

I got superuser app to show up after trying root, but now, after rebooting, cant get laptop to install motorola drivers in order to find the device through adb.exe.. yes im a noobie..
Additional screenshot to my post
Attached is a screenshot in device manager.. I cant get the drivers to install after root and reboot. any help?
You need moto drivers check the sbf tutorial by darkonion he has them there.. he also has easy root one-click method incase you have not achieved proper root.
Sent from my R2-D2 using XDA App
get a mac, all the drivers are installed when you plug in the phone automatically and instantly.
Yeah but then you have a mac
Sent from my DROID2 using XDA App
kageurufu said:
Yeah but then you have a mac
Click to expand...
Click to collapse
Lol so true.
Sent from my R2-D2 using XDA App

Strange Root Issue

When I saw the port for ICS come out I got really excited and flashed it right away. Then I realized for whatever reason I didnt have SU permissions so I couldn't tether to my computer. I was disappointed but I thought, "no biggie, I'll just restore from my back up." When I flashed my back up the SU app was in my app drawer but I still couldn't tether. As a matter of fact I can't do anything that requires SU but the bootloader still reads unlocked. WTF?
I can't flash a new recovery either. I tried installing from ROM manager, I tried pushing it from my computer but I can't get to the recovery any more. ROM manager says that I have CWM 5.0.2.0 currently installed but I can't get to it at all. Again, WTF?
Sent from my Nexus S 4G using XDA App
^clearly the phone is working perfectly fine with the stock ROM from the back up but obviously I want my SU back.
Root your phone and read the development thread versus making blog posts.
Sent from my Nexus S 4G using xda premium
Flash this http://www.tylerwatt12.com/XDA/ics/root_and_theme.zip and please post in right section
Sent from my Nexus S 4G using xda premium
Thanks for not answering my questions. The bootloader is unlocked but I don't have root and I don't have access to recovery mode even tho ROM Manager says I have Clockwork Mod 5.0.2.0 currently installed. I cannot access the recovery mode AT ALL. I cannot flash or push a new recovery but it fully boots into Gingerbread w/o any issues. What is wrong with my phone and how do I fix it.
Sent from my Nexus S 4G using XDA App
Try from rom manager to reinstall a previous recovery version.
Sent from my LG-P920 using XDA App
That doesn't work either. It goes through the prompts but it doesn't actually reboot do the installation.
I just tried unrooting and then re - rooting but that didn't work and I think that actually wiped my phone completely. I don't even know where an SD card would get into this thing.
Sent from my Nexus S 4G using XDA App
Use adb on your computer and push a clockworkmod recovery.img. And we are trying to help u no need for the sarcasm
Sent from my Xoom using xda premium
I'm sorry but I'm just really frustrated right now. Nothing I have tried has worked. Maybe its my commands? To push that recovery image what would I type?
Sent from my Nexus S 4G using XDA App
I also I can't download that zip you linked to. Every time I try it just says failed.
Sent from my Nexus S 4G using XDA App
obsydian2k7 said:
I'm sorry but I'm just really frustrated right now. Nothing I have tried has worked. Maybe its my commands? To push that recovery image what would I type?
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
I get it
Fastboot flash recovery recovery-xxxxxxxxx.img and hit enter
Sent from my Xoom using xda premium
Esteway.619 said:
I get it
Fastboot flash recovery recovery-xxxxxxxxx.img and hit enter
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Get cwm image from here CWM Recovery
Sent from my Xoom using xda premium
relock the phone then unlock it again i had the same problem
I tried relocking and unlocking again then pushed the recovery I just (finally) downloaded but it didn't work. Terminal says error cannot load 'recovery-clockwork-5.0.2.0-crespo4g.img'
Sent from my Nexus S 4G using XDA App
obsydian2k7 said:
I tried relocking and unlocking again then pushed the recovery I just (finally) downloaded but it didn't work. Terminal says error cannot load 'recovery-clockwork-5.0.2.0-crespo4g.img'
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Is that the right name of the recovery img? Try renaming it to just recovery and see if that works.
Edit: make sure your phone is in debugging mode. And uninstall then reinstall the drivers on your computer
Sent from my Nexus S 4G using xda premium
Esteway.619 said:
Is that the right name of the recovery img? Try renaming it to just recovery and see if that works.
Edit: make sure your phone is in debugging mode. And uninstall then reinstall the drivers on your computer
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
manually go into recovery with volume down and power flash the su.zip and u should be good to go that wat I did
Sent from my Nexus S 4G using xda premium
No suggestions have worked so far. It does not matter what the recovery image name is, whenever I try the flash it Terminal says that it cannot load "***.img" or if I try an install command it says that it cannot find "***.zip" I'm on a snow leopard iMac so I don't need drivers n such.
Let me pose the question like this, what would I do to completely restore the phone to factory condition and try to root it again? Like I said before, the bootloader says that it is unlocked but I do not have any root privileges, could not access the recovery I had before nor install a new recovery after having locked the unlocked the phone's bootloader again.
Sent from my Nexus S 4G using XDA App
http://forum.xda-developers.com/showpost.php?p=13773677&postcount=1
go to the link above and follow the directions for returning to stock.
find yourself a one-click root method on XDA that includes superuser, busybox, and CWM.
EDIT: Also, double check the md5 sum for the CWM .zip. use
Code:
md5 recovery-aaaaaa.img
in the terminal and make sure the output matches whatever is given on the CWM site. if they dont have one up, ask for it
NS4g one-click root app:
http://www.mediafire.com/?2jx8xtx2602hi23
this will:
unlock the bootloader
install cwm 5.0.2.0
root
No commands, no messing with pushing files manually, etc. This thing has already saved me from major headaches while restoring my phone once and I've only had it for 3 weeks lol
hp420 said:
NS4g one-click root app:
http://www.mediafire.com/?2jx8xtx2602hi23
this will:
unlock the bootloader
install cwm 5.0.2.0
root
No commands, no messing with pushing files manually, etc. This thing has already saved me from major headaches while restoring my phone once and I've only had it for 3 weeks lol
Click to expand...
Click to collapse
im assuming this is for windows. he said he has a mac so that wouldnt work for him. here this is for mac http://forum.xda-developers.com/showthread.php?t=1129759 just copy and past everything thats there in terminal
Esteway.619 said:
im assuming this is for windows. he said he has a mac so that wouldnt work for him. here this is for mac http://forum.xda-developers.com/showthread.php?t=1129759 just copy and past everything thats there in terminal
Click to expand...
Click to collapse
I missed that...my mistake

Phone reboots into TWRP

well I have been having problems on how to do unlock my phone using a Mac, but I was finally able to unlock it and flash TWRP recovery by using mattlgroff's utility 1.20 now the I have installed TWRP recovery, every time I connect my phone to the Mac it asks me superuser permission for AdB shell I grant permission and it says "Adb shell has been granted permission" and it reboots into TWRP recovery. I even denied superuser permission but it still does the same thing. I have USB debugging on.
is this normal? because I need to transfer some files to my phone so I can Flash a Rom through TWRP. I would really appreciate your help. thanks.
here's a picture attached showing what it says as soon as I connect the phone to computer.
after that it just reboots into TWRP.
Are you on stock rom?
Sent from my Galaxy Nexus using xda premium
denisjr said:
Are you on stock rom?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yeah I'm on stock Rom 4.1.2
Try using air DROID & maybe using a different rom will do it
Sent from my Galaxy Nexus using xda premium
denisjr said:
Try using air DROID & maybe using a different rom will do it
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I fixed it! I had to reset my Mac's SMC, apparently it kept flashing TWRP every time I connected my phone to the computer.
thanks for being helpful anyways !

TWRP

Hi ,
I want to copy files to my LG G2 when i am in TWRP recovery mode , how can i do that?
Same problem
Sent from my LG-D802 using xda app-developers app
Adb push
Sent from my VS980 4G using XDA Premium 4 mobile app
ThanQ
jrgilbert79 said:
Adb push
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks but where can i learn these commands from, im new to android adb commands
Google twrp guide lg g2. First link. Installation option 2 shows an adb push as the installation. Its essentially adb push "File name" location on phone" then twrp van install the zip. Also there is a side loader app that can work with twrp as well
Sent from my VS980 4G using XDA Premium 4 mobile app
jrgilbert79 said:
Google twrp guide lg g2. First link. Installation option 2 shows an adb push as the installation. Its essentially adb push "File name" location on phone" then twrp van install the zip. Also there is a side loader app that can work with twrp as well
Sent from my VS980 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i think you miss understood me , i am in twrp recovery and i dont have any android installed i want to get access to my files .
In twrp. Do you have a file on your phone or want to put one on it? If you hAve no os and you want to put one on it to flash look below. If you just don't know how to flash click install and its self explanatory.
Now plug your phone into a computer with adb and working g2 drivers. It's the same process. Installing twrp with option 2 to push the file. You should or probably push it to /storage/emulated/0 this is the sd card. From here you can install it with twrp. If you took shortcuts to install root and twrp and don't have adb working there's a search on Google for that as well. There are threads in help section dedicated to this or similar issues that have same solution.
Sent from my VS980 4G using XDA Premium 4 mobile app
At last
my drivers are installed , i finally flashed a rom and put the files by mtp.
Nice sorry if I had a tone. I think we both had a difficult time explaining what was going on. ..glad your up and running
Sent from my VS980 4G using XDA Premium 4 mobile app
Thanks for youre help
Sent from my LG-D802 using xda app-developers app

[Q] Help Bricked LG G2 D801

My phone was great until I tried flashing the hellfire ROM. It told me that it couldnt flash bc it was D801 and not G2. Idk what it meant bc all other D801 ROMS flashed successfully. Anyway I tried to factory reset after that and it says it cant mount data or something like that. Now I only get the LG screen. When I try to go into download mode to flash the correct kdz file in flash tool to reset the entire thing back to stock it stays on the screen that says download mode and has the blue dots. And when I try to run the program through windows and the flash tool it tells me that the phone isn't connected to the PC. Can anybody please help me? Oh and I have TWRP recovery installed but all my backups are gone all of a sudden,.I can't do anything with this phone....!!! Thanks to anyone who can help.
jcal321 said:
My phone was great until I tried flashing the hellfire ROM. It told me that it couldnt flash bc it was D801 and not G2. Idk what it meant bc all other D801 ROMS flashed successfully. Anyway I tried to factory reset after that and it says it cant mount data or something like that. Now I only get the LG screen. When I try to go into download mode to flash the correct kdz file in flash tool to reset the entire thing back to stock it stays on the screen that says download mode and has the blue dots. And when I try to run the program through windows and the flash tool it tells me that the phone isn't connected to the PC. Can anybody please help me? Oh and I have TWRP recovery installed but all my backups are gone all of a sudden,.I can't do anything with this phone....!!! Thanks to anyone who can help.
Click to expand...
Click to collapse
Of you search up stock ROM for the lg g2 you should find something that has d801 stock firmware you would see d8010c or something like that find it and read up on it.
Sent from my LG-D801 using xda app-developers app
wahid536 said:
Of you search up stock ROM for the lg g2 you should find something that has d801 stock firmware you would see d8010c or something like that find it and read up on it.
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
I have the kdz file I need but my PC won't recognize my phone
jcal321 said:
I have the kdz file I need but my PC won't recognize my phone
Click to expand...
Click to collapse
Are you able to get into recovery at least?
Sent from my LG-D801 using xda app-developers app
wahid536 said:
Are you able to get into recovery at least?
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
Yes I am able to get into recovery but all my backups are gone and I don't know why . I have TWRP if that helps
Install koush adb drivers and then reconnect your phone and you should be good google for koush adb drivers
Sent from my LG-D802 using xda app-developers app
lingarajug said:
Install koush adb drivers and then reconnect your phone and you should be good google for koush adb drivers
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
Ok I am installing them now. Should I try to connect in download mode and then use the flash tool? Or do I need to go in another direction?
jcal321 said:
Ok I am installing them now. Should I try to connect in download mode and then use the flash tool? Or do I need to go in another direction?
Click to expand...
Click to collapse
Didn't work still won't recognize my phone
jcal321 said:
Didn't work still won't recognize my phone
Click to expand...
Click to collapse
Not sure if this will help or if you read this or not but this is a link about the adb situation
http://forum.xda-developers.com/showthread.php?t=2448699
Sent from my LG-D801 using xda app-developers app
---------- Post added at 04:21 PM ---------- Previous post was at 04:18 PM ----------
jcal321 said:
Didn't work still won't recognize my phone
Click to expand...
Click to collapse
This one says something about adb and drivers,
http://g2-lg.com/download-lg-g2-android-usb-drivers-ver-3-10/
Sent from my LG-D801 using xda app-developers app
If your using windows make sure you run terminal from with ABD shell folder or it won't give you the ABD commnads.
Same problem
I have exactly the same problem please help!!!
someone help please, me too have the same issue please.
Just boot into twrp and select install zip from sideload. Connect the phone to pc. Go to your adb folder and type
adb sideload .zip*(for example:adb sideload update.zip)
Be patient, you got to wait until adb has copied your zip to the phone. Then the actual flashing will start. So leave the phone untouched for like 15minutes and wait till it's done.
This way you can flash the phone in a working state and then kdz again.
Don't forget to wipe all before flashing and factory reset afterwards.
Sent from my LG-D802 using XDA Premium 4 mobile app

Categories

Resources