Database Users

Enter PIN via C# or C++

Hi all!
Ok, I try it here...
Can anyone tell me, how to enter the PIN of the SIMCard to unlock my Blue Angle in C# or C++?
I would like to create a GPRS connection to the internet and have to enter the PIN first.
A code example would be nice.
Thank You

ENTER PINCODE
if your using AT commands
i think the command to enter pin code is AT+CPIN
i'm using Vb6 but i think it is somewhat similar
Mscomm1.output = "AT+CPIN="XXXX"
XXXX is the pin code hope this helps

Thanks for Your answer!
But I already tried this.
To send an AT Command to the modem, I have to open the Com Port COM2. I also have to send the DeviceIoControl command. All AT-Commands return success, even the CPIN command, but nothing happens. If I want to connect to the net, the dialog appears to enter the PIN.
Thanks for Your help.

Thanks for Your answer!
But I already tried this.
To send an AT Command to the modem, I have to open the Com Port COM2. I also have to send the DeviceIoControl command. All AT-Commands return success, even the CPIN command, but nothing happens. If I want to connect to the net, the dialog appears to enter the PIN.
Thanks for Your help.

Hi,
Have you tried to execute the "SimUnlockPhone" API in you app?
I don't know if this works but you can give it a try...
Regards.

manual cdma programming code

I need the manual cdma programming code of my htc ozone. I already try ##000000 and ##778 its now working do you have any idea what is the code?
Thanks,

You may need to Application Unlock your phone first. You can use SDA_AplicationUnlock
Run from PC when phone connected

Problem registering networks in greece

I today receiver my T-mobile G2 from USA, i obtained an unlocking code for sim card lock and the phone opens now. But it cannon search for networks and i cannot register to any network. When i put the enclosed sim card of T-mobile it searches and finds all greek networks. But with my card all i get is error... I also noticed that when i configure a new apn the MCC and MNC codes arent filled automatically as they should be. Even when i manually entered them (MCC 202 and MNC 05 for GR Cosmote) and saved it, i could not found it on the list. So i think the problem is it cannot read properly the MCC MNC codes from sim card

Update
After entering the unlocking code when i tried the tmo card it also cannot find any nettworks. When i go to hboot and choose simlock i get error message:
FAT32 init ok
Open MCCMNC file fail
Open CID file fail

SOLVED: FAKE IMEI after flash, shows 00000000

Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((

***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide

This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?

i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps

##3282# get error msg : connection problem or invalid mmi code

hi all pls help me
i tried to disable band 41 and 25 by code ##3282# but i get error msg : connection problem or invalid mmi code.
tks