Hello all
Somebody can help my:
I have N9005. FW vers. MJ1.
I tried flashing new modem MJ7 using mobil odin. No results. I saw on black screen (when shows process) only: clean... clean... and device rebooted.
Maybe somebody tell me when I can take new modem (higher MJ1) for flashing via TWRP.
I have little problem with GPS. Long time searching satellites. I hope new modem fix it.
Sent from my SM-N9005 using xda app-developers app
Mj7 with mj1 fw will not work, you will have to flash full mj7 firmware in MOP with everroot option
No fear, MOP does not flash any bootloaders
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Related
Hi Guys,
I have a N9005 with XXUDMJ7 software I'm trying to change the modem baseband to N9005XXUBMI6 which is the one used by all Australian carriers. When trying to flash the modem.bin for the UBMI6 from DjeMBeY's thread the phone just boot loops with no baseband/reception. I was able to get the phone up and running again flashing N9005-2modems-DMJ7-RomDMJ7.tar.md5 that someone had posted in the thread. So the phone seems 100% operational again but id still like to get the N9005XXUBMI6 modem up and running if possible.
Any suggestions?
I have tried everything below MJ7 Modem and the result is the same , bootloops and unknown baseband. What I guess is that once you update you can't downgrade :/
Sent from my Note 3 powered by Omega v3.1
Vocaloid fan? Check out this thread!
No one else can offer any insight?
Can you post a link for:
N9005-2modems-DMJ7-RomDMJ7.tar.md5
?
Edit:
http://forum.xda-developers.com/showthread.php?t=2475714&page=12
found it
Sorry to tell you but i will not work at all. Dmj7 prevents you from downgrading full fw or onl parts of it...
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Sorry to tell you but i will not work at all. Dmj7 prevents you from downgrading full fw or onl parts of it...
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
I see, just like the S4 than once you had the newer 4.3 boot loader you couldnt use old modems/software.
Exactly
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Hi! My nlte 3 SM-N9005 is running Mj3 and its quite unstable at some times.. can i flash a OTA in recovery to get Mj7? Its rooted and knox is 0x1 so dont think of that. I would like to get some stability up and running! Flashing update with Kies? Would that work? My phone also stays at bootlogo in 2 minutes before bootanimation appears.. please help!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Download it at sammobile.com/firmwares and flash with mobile odin pro with everroot
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Download it at sammobile.com/firmwares and flash with mobile odin pro with everroot
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Are you sure i cant use Kies instead?
Yes
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Yes
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/?model=SM-N9005&pcode=NEE#firmware
what about this?
Kies tells me that i can update my phone but it might be unstable. because it runs modified software
Will loose root
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Will loose root
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Anything else than root that i will lose?
Will it be stable or not?
Can i just re root then?
It'll be stable, I had major issues on MJ6 with apps stopping working etc, obviously I couldn't OTA update and it was a major annoyance. So i plugged it into KIES and updated through there, even though it told me it may have issues or not update due to modified software.
It worked fine, and my phone is stable, battery life is good and I just used CF-Auto root to re-root it again (I too had already flagged 0x1)
you will defo notice the improvement tho.
radicalisto said:
It'll be stable, I had major issues on MJ6 with apps stopping working etc, obviously I couldn't OTA update and it was a major annoyance. So i plugged it into KIES and updated through there, even though it told me it may have issues or not update due to modified software.
It worked fine, and my phone is stable, battery life is good and I just used CF-Auto root to re-root it again (I too had already flagged 0x1)
you will defo notice the improvement tho.
Click to expand...
Click to collapse
you sure?
i have twrp recovery installed.. would that affect anything?
If you can flash cf auto root with odin, u can also flash it wirh odin anyways ;D
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Yup sure as sure can be, and what KB said.
If you're worried because Kies said its unstable, don't be... Samsung is covering their ar$er by putting in these disclaimers....
And the best way to root is by using Mobile ODIN Pro to flash MJ7. You will keep root and the MJ3 bootloader. Not sure if that makes a major difference but it sure helps if you have the old root friendly bootloader...
I updated and it worked! My phone is no longer draining the battery! It boots right up! Wonderful!
Sent from my SM-N9005 using XDA Premium 4 mobile app
One more question! When Kitkat arrives? Will we be able to update through Kies on 0x1 knox status and modified software installed?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Streykatorato said:
One more question! When Kitkat arrives? Will we be able to update through Kies on 0x1 knox status and modified software installed?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Should be no reason why not.
radicalisto said:
Should be no reason why not.
Click to expand...
Click to collapse
Well.. now my phone takes 2 minutes to boot again. It might be TWRP... because it boots fast before i installed TWRP.. but after installing it.. it takes 2 minutes! What should i do? Anyone else experiencing this problem? Everything else works fine!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Looks like a TWRP issue then, maybe try reinstalling TWRP or removing and seeing what happens.
Updated to Mj7 pushed from Samsung OTA.
Stil not stable. Almost every phone call a reboot ?
Sent from my SM-N900 (not yet rooted) using xda app-developers app
If you're using wanam exposed, turn centre clock off.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hello, Looking for some gigantic help.
Was on Vodafone MI7, Rooted with URDLV-Knox 0X0
Then, use Mobile ODin v3.85 to upgrade MJ7, with MI7 bootloader- Knox still 0X0
But Today, needed Warranty for button fix, So Still on MJ7(with MI7 bootloader) I used Mobile Odin to flash MI7 stock and now....
Baseband Unknown....System Process isn't responding.......Constant Reboots after ~1mins
So can someone guide me to fix this problem with Knox not tripping....as My Knox is still 0X0...
Thank you.
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Try to flash mi7 stock with odin 3.09 (pc version)
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Hi I tried that, it flashed but problem still persist.
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Did u do a factory restet?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
yes but only via the phone
How about packing mj7 without bootlaoder and flash this?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
How please?
Sent from my HUAWEI Y300-0100 using Tapatalk 2
PREPARE:
NON-HLOS.bin
boot.img
cache.img.ext4
hidden.img.ext4
modem.bin
recovery.img
system.img.ext4
#extracted from mj7 original firmware
HOW TO:
install cygwin64 (with all default)
start it once
go to c:/cygwin/home/
put mentioned files there
in cygwin:
tar -H ustar -c NON-HLOS.bin boot.img cache.img.ext4 hidden.img.ext4 modem.bin recovery.img system.img.ext4 > DMJ7.tar
md5sum -t DMJ7.tar >> DMJ7.tar
mv DMJ7.tar DMJ7.tar.md5
-> flash generated file
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Thx will try this and see.
Hi I am having difficulties, can give me exact step by steps including command in CW.
why dont you flash the stock rom back using normal odin?
or even better, unroot with supersu and flash only the baseband back
Hi do you flash baseband and kernel in AP?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
what step exactly?
how far do u get?
Ok so I put mj7.tar in cygwin home then type what exactly in cygwin command....
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
So cook mj7.tar?
ddogishere said:
Hi I am having difficulties, can give me exact step by steps including command in CW.
Click to expand...
Click to collapse
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
What step exactly? How far do y get?
hit 'thanks' if i helped you
SM-N9005 DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
RavenY2K3 said:
The problem you're having is because the modem can't be downgraded once you've gone over a certain version (MJ3 I think it was) that is reason, the solution is to do what has been suggested but you're going to have to stick with the version that the modem came with.
I know this from the testing I did that discovered the other required files when @BlueChris originally reported problem with no Wi-Fi on the newer firmwares a while ago.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Yeah it worked but WiFi not working so now what...
ddogishere said:
Yeah it worked but WiFi not working so now what...
Click to expand...
Click to collapse
Put the phone into download mode and with Odin (PC) flash the NON-HLOS file.
You'll be working again as soon as it fires up.
P.S. that file is in the official Samsung firmware file, just extract it.
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
baherkilani said:
Hello,
I am using SGN 3 9005
on KNOX Counter 0×0
Kernal 0×0
Build Number
N9005XXUDMJ7
can roll back to any another version like J4 or older, using ODIN?
without any counter be effected?
please advice
thanks
Click to expand...
Click to collapse
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
yeah i did
ultramag69 said:
NO... It's pretty much all over the forums that MJ7 can't be rolled back.
Click to expand...
Click to collapse
I did it just fine when first flashing a rom (came from latest update, have flashed jellybean, hyper, etc.) I'd try to just try flashing a rom after a clean/wipe with Safestrap. I went down as far as MK7. I think I had to flash the stock .pit file with odin one time to make it happen one time when I soft bricked
I remember reading that the odds of triggering a knox counter with a certain app over PC (rhymes with lingo) is something like 1-10,000.
So now there is no way to roll back ?
baherkilani said:
So now there is no way to roll back ?
Click to expand...
Click to collapse
Nope! You can't rool back. You will soft brick ur phone using ODIN and even if youflash a custom ROM based on that older base, it won't boot.
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
If you are rooted with urdlv and kept the old bootloader it is possible with mobile odin, else no way
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
my bootloader is MJ1 i want flash MJ7 and no change bootloader! URDLV works on MJ7? mobile odin dont trigger knox ?
Mop wont flash bootloaders -> no knox trip.
Make sure u tick "everroot"
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
i have decided to flash modem and followed the instructions and successfully change from mj1 to mj7.... but i have one more question...can anybody tell me what is this NON-HLOS? is it neccessary to flash this file through odin and how does it works? i search on gogole and also used the search button here but still cannot find the answers...
Ppl call it modem2, just flash it in cp slot
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app