hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance
chochweet said:
hi
is there anyone whocan help in in installing the rom with kenal 2.6.35
i tried few roms like aurora 4.03 and miui (2.6.35) but everytime i get the problem of .... NO NETWORK AND BATTERY STATUS NOT SHOWING
i used clockworkmod 5.5.0.4 for factory reset, cleared cache, cleared dalvikcache but results, every time the same problem persists, kindly help in installing arom with 2.6.35 kernal
thanks in advance
Click to expand...
Click to collapse
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?
Edward Stanbury said:
sounds like you tired to install over a froyo rom/kernel, did you upgrade to 2.3 official before installing the .35 recovery and rom?
Click to expand...
Click to collapse
hi
i am using miui from the last few months now, i installed cyanagen , all these roms are based on 2.3 and at present i am using miui_u8800_2.2.24 andi tried to install rom from this rom only, i dont use froyo, but still the problem persists,
can u help
You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.
now different prob
yannn007 said:
You need to install OFFICIAL 2.3.5 if you want to use .35 kernel ROMs (new CM7.2, Aurora, new MIUI...). It is not enough if you just install a custom 2.3 ROM beacuse older 2.3 ROMs use .32 kernel, so you need to update to official 2.3.5 which also changes some other files so you can use .35 kernel and from official you can go to .35 kernel custom ROMs.
Click to expand...
Click to collapse
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that
chochweet said:
hi
thanks for what u said but
i installed official 2.3.5 but now there is no imei and when i try to load into pink screen to change the recovery, it is not mounting, seems there r no files in it,
please help
and also when i revert back to 2.2 it shows files in boot screen in boot loader (pink Screen) and there i can change the latest recovery 5.5.0.4 but again the problem is back to .32, is there any way i can install only kernel to first change from .32 to .35 and then try to install a different rom (.35)
i would also like to add the official update i used was Android 2.3 V100R001C00B526G001 and now there is one more update Android 2.3 V100R001C00B528G001, currently i am downloading that, i will let u know what happens after i download that
Click to expand...
Click to collapse
You can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
Every ROM from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)
Problem solved
yannn007 said:
you can change recovery with root explorer. Here is a great guide: http://forum.xda-developers.com/showthread.php?t=1420728
every rom from beta2 on has locked bootloader so you cant change files when in pink screen but you can unlock it after you rooted it and changed recovery (search development forum for tutorial)
Click to expand...
Click to collapse
thanks alot, i changed the recovery after usig file expert and then installed aurora, now its working fine, thank god i had already taken my imei backup
thanks again
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
nileshpandey84 said:
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
Click to expand...
Click to collapse
did u wiped cache n data?if yes,then go for format system,data,cache options n then go for mount system,data,cache options n flash ur required rom nw.if that evn doesn't helpd u.I'm sori.ask any other.
You have to wipe cache and data, than, to be sure, install stock rom, and then creed.
nileshpandey84 said:
Recently i had flashed to [CUSTOM][ROM][ICS/Jelly Bean mod] NextToICS ROM v2.0 Galaxy Y |Jelly Blast|[Updated]
http://forum.xda-developers.com/showthread.php?t=1679563 .But the interface is not good nd the icone are too small.Know i wanna flashed to ather rom like creed nd all.but m enable to flash...the flashig process is shown completed.but when i reboot it it i still have the same rom. i tried several times but unsuccesfull.i even tried with latest clockword mod but unsuccessful..so plzz suggest me friends wht to do ..i don want this rom..plzz any suggestion..
Thank you.!!!
Click to expand...
Click to collapse
My suggesion is just change your current kernel and then change the rom. But dont forget to wipe data and dalvik cache. It will work..
Sent from my GT-S5360 using xda premium
Change the kernel before installing another rom.
or flash stock rom via odin and then change the kernel or rom
mount the system,
im sure you forgot about that
it might sound redundant but i'm telling you flash a stock rom via odin first then flash your desired custom rom.
if you have a problem with odin look at the "all you need to know(sgy basics)' thread or sgy for dummies, if i recall it right.they have some tuts there
about odin flashable stock rom look for sir docky's thread (its a real life saver), i recomend DXLC1
ibelive there is a link to that thread in the threads a said earlyer.
lastly i advise you to take sometime to read user's feedback on any custom rom you chose, because frequent changing of roms is not very comfy, and maybe they might have some fix to your problem with their rom.
flashing new rom
hi
You may also when in recovery choose "Mounts and Storage" unmount /system and /data then choose format syste and format data then install your new rom..
cheers
Alphacode
hello my device had a xcuan firmware. i m trying to install a custom stock rom based; all are based on xxuan firmware and the camera doesnt work ..i tried to install the fix for camera (for example bradex rom) but doesnt works... how is it possible?
hey there sgy mods of xda.can you pls give me an advice or suggestion which stock rom version/baseband is compatible to merruks tech kernel 2.0?thanks!id tried it once in S5360_DXMJ1_OLBMJ1_DXMI1 stock rom.before i flash kernel 2.0 busybox was there but there is no kernel swap support.after i flash the kernel 2.0 i think it works great but the problem is theres no busybox installed after i check it thru root checker and there is no swap support after im trying to install ram expander.can you pls advice me or suggest me for the compatible stock rom version/baseband for Meruks kernel 2.0.thanks alot guys for those who will help.
btw, another problem in stock rom is that i cant install some of the games that is compatible to other gingerbread os phones/mobile.i wonder why...is there anything i have to do to make it possible?even apps too...
one more thing, i hope there is a detailed tut/steps on how to restore/backup stockrom using the cwm recovery.i hope there's some applications included that is compatible for restoring and backup.it is also a guide to all newbie/noob of sgy s5360.here's what happen why im asking for this....i had a stock rom flashed in my sgy and the version/baseband is the one id mention above.then i tried to flash custrom jellyblast.it works great at first but theres some bugs so i decided to restore my backup stockrom but after i did that.somethings wrong happen like bootloop and the worse is i can go to recovery mode just a bootlogo.so i had to flash the stockrom again using odin and i think that is a time consumable and i had to pay for computer rent to the computer shop just to revive my sgy.so thats my biggie problem....specially that im still newbie in sgy s5360.
I m new in this forum. . I m on stock 4.4.2 rom .. i jst rooted it ... i downloaded cm 12.1 .. rom .. i don't know next step. .. . do i need to flash cm 11 rom first ? Or can i flash directly. On stock rom 4.4.2 .? Which recovery should i use ? Thanx in advance