I9505 goes of of service when locked. - Galaxy S 4 Q&A, Help & Troubleshooting

Hey guys, i just flashed the Google Edition 4.4 onto my I9505. As the title states, whenever I lock the phone via the button and turn it on, it says "No Service" so I manually have to choose the operator APN again. Anyone that could help me with this?

meh.hajj said:
Hey guys, i just flashed the Google Edition 4.4 onto my I9505. As the title states, whenever I lock the phone via the button and turn it on, it says "No Service" so I manually have to choose the operator APN again. Anyone that could help me with this?
Click to expand...
Click to collapse
I recommend you to flash the latest modem for your phone ,Flashing a new 4.3 modem will fix any data drop issues. and you need the modem that start with MJ5/ Mk8/Mk9 until MKF

Repulsa said:
I recommend you to flash the latest modem for your phone ,Flashing a new 4.3 modem will fix any data drop issues. and you need the modem that start with MJ5/ Mk8/Mk9 until MKF
Click to expand...
Click to collapse
Sounds about right, since i'm not so good with all of this would you mind linking me a modem that would work?

meh.hajj said:
Sounds about right, since i'm not so good with all of this would you mind linking me a modem that would work?
Click to expand...
Click to collapse
Yes i can but you need to tell me which bootloader you have ? do you have an old bootloader or newest bootloader by any chance? please turn off you phone and press Power+Volume down in order to boot into download mode and tell me if you see on top of the green droid show's Knox void warranty 0.0 means you have Newest one. if you dont see those by any chance then you are on old bootloader and ill be happy to give you the link you need inorder not to mess your phone

Repulsa said:
Yes i can but you need to tell me which bootloader you have ? do you have an old bootloader or newest bootloader by any chance? please turn off you phone and press Power+Volume down in order to boot into download mode and tell me if you see on top of the green droid show's Knox void warranty 0.0 means you have Newest one. if you dont see those by any chance then you are on old bootloader and ill be happy to give you the link you need inorder not to mess your phone
Click to expand...
Click to collapse
Hmmm, on top of the green droid it states the following:
ODINMODE
PRODUCTNAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED

meh.hajj said:
Hmmm, on top of the green droid it states the following:
ODINMODE
PRODUCTNAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
Click to expand...
Click to collapse
thats better its old bootloader :good: Download this http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rarand unzip the file and open odin and select phone and find the file you extract and flash away.
Incase you dont know how to flash via odin Open odin > select phone >find the one you download/extract then Turn off your phone manually and wait for 5 sec and put your phone into download mode power+Volume down> Put both cable and press start on odin, and tell me if it works

Repulsa said:
thats better its old bootloader :good: Download this http://www.mediafire.com/download/48r0rgqv25s8968/GSM_Modem_XXUEMFK_and_LTE_Modem_XXUBMH1.rarand unzip the file and open odin and select phone and find the file you extract and flash away.
Incase you dont know how to flash via odin Open odin > select phone >find the one you download/extract then Turn off you phone manually and wait for 5 sec and put your phone into download mode power+Volume down> Put both cable and press start on odin
Click to expand...
Click to collapse
Thanks my man! Your thank you meter did just rise a bit!

meh.hajj said:
Thanks my man! Your thank you meter did just rise a bit!
Click to expand...
Click to collapse
Glad that helps and please confirm that your baseband version change into I9505xxuemfk by going Settings> More> about device that should fix your data drop issue. Have a nice day.

Related

[Q] [i9505G] Rooting GE S4?

**Update**
ivanoterra and myself have both used CF-Auto Root on our GE S4's and we both can confirm that it has worked.
this is the file we used: http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
**update 2**
More good news, I flashed TWRP using Odin and it worked! TWRP found here: http://www.teamw.in/project/twrp2/182
**OP below **
Hi folks,
Just got my GE S4 this morning. So far it's awesome. The only problem is that I'm so eager to root this phone and I cannot find any information on how to do it. Any ideas? I'm doubting it's as simple as just using the same method as the regular S4's, but I could easily be wrong.
Also, any information on whether there will be a sub-forum for the GE phones?
Thanks!
Same here
Im on the same road...
bscotth said:
Hi folks,
Just got my GE S4 this morning. So far it's awesome. The only problem is that I'm so eager to root this phone and I cannot find any information on how to do it. Any ideas? I'm doubting it's as simple as just using the same method as the regular S4's, but I could easily be wrong.
Also, any information on whether there will be a sub-forum for the GE phones?
Thanks!
Click to expand...
Click to collapse
What happens when you put the device in download mode? (Volume Down + Home + Power buttons on start up)
tublah said:
What happens when you put the device in download mode? (Volume Down + Home + Power buttons on start up)
Click to expand...
Click to collapse
Attached is a picture of the download mode screen.
The text in the top left corner says:
ODIN MODE
PRODUCT NAME: GT-I9505G
CURRENT BINARY: Samsung Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Did you try Auto Root ? Im getting close to trying it....
Just did a Auto Root... IT WORKED...
I used this one http://forum.xda-developers.com/showthread.php?t=2219803
The app asked for root and i was able to allow it...
bscotth said:
Attached is a picture of the download mode screen.
The text in the top left corner says:
ODIN MODE
PRODUCT NAME: GT-I9505G
CURRENT BINARY: Samsung Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
Click to expand...
Click to collapse
I think we'll have to wait for a custom recovery before we can root, methinks.
If you're feeling saucy, you can try 'fastboot oem unlock' and see what that does? (Warning: it may wipe your device, it does for my nexus 10)
EDIT: Looks like auto-root does fastboot oem unlock if you're not unlocked.
ivanoterra said:
Did you try Auto Root ? Im getting close to trying it....
Just did a Auto Root... IT WORKED...
I used this one http://forum.xda-developers.com/showthread.php?t=2219803
The app asked for root and i was able to allow it...
Click to expand...
Click to collapse
which version did you use? The T-Mobile one or the international one?
This
bscotth said:
which version did you use? The T-Mobile one or the international one?
Click to expand...
Click to collapse
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....
ivanoterra said:
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....
Click to expand...
Click to collapse
Sweet! What happens when you go into download mode now? Does it show custom binary counter, or does it still show official?
ivanoterra said:
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
This one....
Click to expand...
Click to collapse
Thanks! Here goes nothing...
tublah said:
Sweet! What happens when you go into download mode now? Does it show custom binary counter, or does it still show official?
Click to expand...
Click to collapse
Ill try that in a moment... Its recovering my apps... Its like 250 apps.. Its on 32%...
But i guess it wont show as custom, GE edition has a Unlocked Bootloader. It was made to be custom rom friendly....
Even if it counts... It wont matter... Probably a counter reseter will solve it...
Didn't work.
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
ivanoterra said:
Ill try that in a moment... Its recovering my apps... Its like 250 apps.. Its on 32%...
But i guess it wont show as custom, GE edition has a Unlocked Bootloader. It was made to be custom rom friendly....
Even if it counts... It wont matter... Probably a counter reseter will solve it...
Click to expand...
Click to collapse
That was going to be my next question - whether Triangle Away works - again, it should, since this is supposed to be identical to GT-i9505...
Sorry for all the Q's. I'm waiting on my device to ship.
bscotth said:
Didn't work.
"Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
Click to expand...
Click to collapse
Nooooo... You dont know how to flash ?
read the instructions there:
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
(KILL ALL KIES PROCESSES... Before proceding...)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
tublah said:
That was going to be my next question - whether Triangle Away works - again, it should, since this is supposed to be identical to GT-i9505...
Sorry for all the Q's. I'm waiting on my device to ship.
Click to expand...
Click to collapse
Its ok... but im not sure about all of that... 70%... just 30% more
ivanoterra said:
Nooooo... You dont know how to flash ?
read the instructions there:
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
(KILL ALL KIES PROCESSES... Before proceding...)
---------- Post added at 09:16 PM ---------- Previous post was at 09:15 PM ----------
Its ok... but im not sure about all of that... 70%... just 30% more
Click to expand...
Click to collapse
I know how. I've done it many times before this. While flashing, odin crashed. :crying:
Is it possible to flash the GE firmware on the international version? If yes does anyone have a guide?
Okay, it worked. Thought my phone was bricked. I used a different version of Odin and it stopped crashing and worked.
I can now confirm that Auto Root works on the GE S4!
Download mode shows that I'm on a custom binary now. It still says "Write Protection: Enable"
I'm curious to find out what that means. The bootloader is already unlocked. I wonder if a certain partition is locked.
I guess the next question to answer is: Can we use the same recoveries as the i9505? I hope so..
bscotth said:
Download mode shows that I'm on a custom binary now. It still says "Write Protection: Enable"
I'm curious to find out what that means. The bootloader is already unlocked. I wonder if a certain partition is locked.
Click to expand...
Click to collapse
Would you be willing to try out Triangle Away to see if it'll reset the custom binary counter? I also wonder if you do fastboot oem unlock if it'll turn off write protection?
tublah said:
Would you be willing to try out Triangle Away to see if it'll reset the custom binary counter? I also wonder if you do fastboot oem unlock if it'll turn off write protection?
Click to expand...
Click to collapse
I might be wrong but I don't think download mode supports fastboot. Either that, or I'm doing something wrong. With my phone in download mode and my S4 connected, the command "fastboot devices" doesn't show any devices, but when I plug my N4 in, it shows up. Is there a special fastboot mode that is different from download mode?

[HELP] I9505 network signal problem

Hi, im from peru, recently bought a cell phone model: Samsung S4 I9505 Factory Unlocked (AP:i9505xxuemk8 Modem: i9505xxuamdc CSC: i9505btuemk5) Android 4.3; the phone recognizes my network operator (movistar) without problems but when the phone goes into "deep sleep" mode and i turn on, it loses signal (check images) and the signal returns after a few seconds (or minuts), only GSM Netwotk Mode works fine, please be patient with me, because i'm newbie, thank you.
Run4silver said:
Hi, im from peru, recently bought a cell phone model: Samsung S4 I9505 Factory Unlocked (AP:i9505xxuemk8 Modem: i9505xxuamdc CSC: i9505btuemk5) Android 4.3; the phone recognizes my network operator (movistar) without problems but when the phone goes into "deep sleep" mode and i turn on, it loses signal (check images) and the signal returns after a few seconds (or minuts), only GSM Netwotk Mode works fine, please be patient with me, because i'm newbie, thank you.
Click to expand...
Click to collapse
All is ok less the modem. You will have to download and extract this MODEM. How?
1. Download ODIN and start it as administrator.
2. Now open the windows taskmaster. End all "Kies" processes.
3. In Odin untick "Auto reboot"
4. For the bootloader select BL and browse to your bootloader file.
5. For the modem select CP/PHONE and browse to your modem file.
The next step is VERY IMPORTANT
6. Power off your phone
7. Start your phone into download mode by holding Home button + Vol down + Power button. Volume Up then (PIC 1)
8. Once your phone is in download mode, connect it to your PC. (Best results always with your original Samsung USB cable)
-Odin should say "Added" now.
9. Press the Start button in Odin and let it do it's magic. Wait. (PIC 2)
10. When Odin shows "PASS" you can unplug your phone.
IMPORTANT: WAIT UNTIL YOU SEE "PASS" DO NOT UNPLUG THE PHONE BEFORE!
11. When you have unplugged your phone, it is still in download mode. Just hold the power button about 8 seconds until your phone reboots.
DONE
Go to Settings/More/About device. There you will see your new baseband.
12. Do this process one time more if u still seeing the old modem/baseband.
Joku1981 thank you for ur help, i installed the modem and now everything works fine!!! thank you very much!!!
after installing the modem, i have received the message to update to android 4.4.2, I'm very happy
Run4silver said:
Joku1981 thank you for ur help, i installed the modem and now everything works fine!!! thank you very much!!!
after installing the modem, i have received the message to update to android 4.4.2, I'm very happy
Click to expand...
Click to collapse
Hi. I have the same device and the same firmware and, unfortunately, the same problem
Can i flash this modem by Odin on my device NO-rooted ?
Thank you in advance
ps: Hola Perù
FerrarisIV said:
Hi. I have the same device and the same firmware and, unfortunately, the same problem
Can i flash this modem by Odin on my device NO-rooted ?
Thank you in advance
ps: Hola Perù
Click to expand...
Click to collapse
Flash modem can void ur warranty. Flash a second time the same firmware u are using through ODIN for rewrite the baseband and no void ur warranty :highfive:. It should works
Joku1981 said:
Flash modem can void ur warranty. Flash a second time the same firmware u are using through ODIN for rewrite the baseband and no void ur warranty :highfive:. It should works
Click to expand...
Click to collapse
Thanks for your reply. I will able to try only next week because the device is not mine...
nice week end

Help with brick

Hello
I have F version, country Italy
I tried install a few roms but I always had freeze screen and reboots. So finally tried restore from Odin and I had brick. I used the last firmware from Odin and one from this forum of "Fast download" And this only shows the bootimage and reboot again of freeze
In download mode shows in System: "custom", Recovery: Samsung Oficial
I cant enter on recovery mode
Im not sure if Samsung I still give me "warranty"
Anybody can help me ?
PD: sorry4myenglish
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Natherul said:
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Click to expand...
Click to collapse
Exactly that firmware made the brick on my phone
Ronalrago said:
Exactly that firmware made the brick on my phone
Click to expand...
Click to collapse
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Natherul said:
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Click to expand...
Click to collapse
Yep i can and I tried that, but the phone doesnt enter to recovery mode :crying:
Only can enter to dowloand mode
Ronalrago said:
Yep i can and I tried that, but the phone doesnt enter to recovery mode only:crying:
Only can enter to dowloand mode
Click to expand...
Click to collapse
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Natherul said:
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Click to expand...
Click to collapse
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
Nice, I did not know that SmartSwitch for PC had build in recovery tools, but that is good to know.
Ronalrago said:
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Click to expand...
Click to collapse
That message means that SElinux is enforced and the way around that is a custom kernel as the stock on is forcing it always.
Natherul after I bricked my phone by installing audax and the unchecking in dev options "oem unlock" Smart Switch was the only one thing that actually unbricked my phone :good:
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Ronalrago said:
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
DavidB93 said:
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
Click to expand...
Click to collapse
ok thanks I used and works but still have reboots and doesnt recognize the touch :crying::crying:
The download mode now says System: Oficial
Maybe try once again ?
DavidB93 said:
Maybe try once again ?
Click to expand...
Click to collapse
I did again. Also tried with odin and nothing
:crying::crying:

Silver surfer v grand daughters s5

Thanks for looking at my post.
as soon as power is turned on I see this on the screen
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
sbl1 partition dosent exist
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G901F
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : Custom
REACTIVATION LOCK FF
KNOX WARRANTY VOID 0x0
QUALCOM SECUREBOOT:ENABLE (CSB)
RP SWEREV: S1, T1, R1, A1,P1
SECURE DOWNLOAD: ENABLE
UDC START
This is all I can see,nothing works...... tried battery removal,button combinations, etc etc
but nothing happens...all I get is the same screen and I cant navigate anything.
OF COURSE MY GRANDAUGHTER HASNT TOUCHED ANYTHING (she said...hmmmmm)
any help guys,much appreciated...took 20 mins just to type this message out.
thanks,
Harry.
The phone saying custom means root has been attempted or some other non official action. The boot image is corrupted or missing it sounds like. That's a soft brick. Download the marshmallow stock firmware for your carrier from sammobile, boot it in download mode and reflash the firmware. It should fix the issue.
Hi,and thanks for your help
I believe I have now downloaded the correct software as you instructed.
How do I install it please,,,would it be via odin? (I know a little about this program)
No joy
harryj22 said:
Hi,and thanks for your help
I believe I have now downloaded the correct software as you instructed.
How do I install it please,,,would it be via odin? (I know a little about this program)
Click to expand...
Click to collapse
No joy via odin, "there is no pit partition"
On the phone itself .....reads
ODIN flash read failure
ERROR there is no pit binary
ODIN flash read faliure
harryj22 said:
No joy via odin, "there is no pit partition"
Click to expand...
Click to collapse
First - try another cable if possible.
Second - get this small program and download full factory firmware from Samsung server. It will contain the necessary pit file.
What CSC (regional code) do you need?
Have d/loaded samfirm but cant see how to use.......
trying to locate another usb lead
unure of what a region code is.... its used in the uk on Vodafone
sorry I cant be more helpfull
harryj22 said:
unure of what a region code is.... its used in the uk on Vodafone
Click to expand...
Click to collapse
Samsung has no UK Vodafone variant for S5.
If you still have the original box you can find "Model: SM-G901blablablabla" there on the sticker.
"blablablabla" contains regional code.
---------- Post added at 10:42 PM ---------- Previous post was at 10:03 PM ----------
@harryj22
Here's a firmware for you.
You need to download it, unpack and flash via Odin.
There're 4 files in the zip. You need to point Odin to each of them in the appropriate slot.
I.e. AP_xxxx.tar.md5 in AP slot, BL_xxx.tar.md5 in BL slot and so on.
It's VD2 variant, Vodafone Germany.
Should work well in the UK, you only need to select English at the startup.
..
bbsc said:
@harryj22
Please, inform me when you don't need it any more, I'll delete the file form the cloud.
TIA.
Click to expand...
Click to collapse
Sorry,thought I had replied......
okay,so booted phone up,via 3 buttons (the only way it will start).
open odin (run as admin)
insert all files as instructed into each field
odin reads ....Fail
Initialization
set pit file
do not turn off target
fail
re partition operation failed
all threads completed (succeed 0 / failed 1)
Phone reads...
odin flash read failiure
error there is no pit binary
pit fail total sectors (38375936)
Tried removing usb and plugging back in .but still the same result
I think its time for this phone to visit the bin.
harryj22 said:
I think its time for this phone to visit the bin.
Click to expand...
Click to collapse
Not so fast.
But the results look strange.
Please power off the phone and start it in Odin mode (hold power, Vol- and Home, after a message appears press Vol+).
It must look like here: http://dorylabs.com/wp-content/uploads/2014/12/samsung-galaxy-s5-download-mode.jpg
Now tell me what's there in "Product name: ???" Is it really SM-G901F or something other?
Is there the name of the product on the sticker under the battery?
One more chance: try to flash that firmware (4-files), but add pit-file before flashing.
You need to download and unzip it.
Insert 4 firmware files in Odin's slots and then insert pit-file.
Pit-file should be inserted in Odin's "Pit" tab, ignore the warning.
Note, this pit-file is for SM-G901F, VD2 firmware (exactly what you've downloaded from my cloud), it may not work with other firmwares.
bbsc said:
Not so fast.
But the results look strange.
Please power off the phone and start it in Odin mode (hold power, Vol- and Home, after a message appears press Vol+).
It must look like here: http://dorylabs.com/wp-content/uploads/2014/12/samsung-galaxy-s5-download-mode.jpg
Now tell me what's there in "Product name: ???" Is it really SM-G901F or something other?
Is there the name of the product on the sticker under the battery?
Click to expand...
Click to collapse
I will try and get some photos uploaded for you to see later ,thanks for your perseverance.......,got to go to work
bbsc said:
Not so fast.
But the results look strange.
Please power off the phone and start it in Odin mode (hold power, Vol- and Home, after a message appears press Vol+).
It must look like here: http://dorylabs.com/wp-content/uploads/2014/12/samsung-galaxy-s5-download-mode.jpg
Now tell me what's there in "Product name: ???" Is it really SM-G901F or something other?
Is there the name of the product on the sticker under the battery?
One more chance: try to flash that firmware (4-files), but add pit-file before flashing.
You need to download and unzip it.
Insert 4 firmware files in Odin's slots and then insert pit-file.
Pit-file should be inserted in Odin's "Pit" tab, ignore the warning.
Note, this pit-file is for SM-G901F, VD2 firmware (exactly what you've downloaded from my cloud), it may not work with other firmwares.
Click to expand...
Click to collapse
here you go.............................................................................
pit file didn't seem to work....... talking of which,off I go....thanks for your perseverance.
So, if I understand correctly, the phone boots to this "Boot recovery mode" if you hold 3 buttons (Vol Down, Power and Home), right? Not "Odin mode"?
Well, what happens if you hold Power button for 15-20 sec. in this "Boot recovery mode"?
harryj22 said:
BOOT RECOVERY MODE
CHECK BOOT PARTITIONS
sbl1 partition dosent exist
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G901F
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS : Custom
REACTIVATION LOCK FF
KNOX WARRANTY VOID 0x0
QUALCOM SECUREBOOT:ENABLE (CSB)
RP SWEREV: S1, T1, R1, A1,P1
SECURE DOWNLOAD: ENABLE
UDC START
Click to expand...
Click to collapse
bbsc said:
"Boot recovery mode" (Vol Down, Power and Home) "Odin mode"
Click to expand...
Click to collapse
1. There is not such thing as boot recovery mode. That is a description of the problem. There are only four modes in which a powered-off S5 would go, no matter the version. Normal Boot, Recovery, Download Mode (sometimes known as ODIN Mode) and Charging Mode.
2. Your problem is that the sbl1 partition doesn't exist due to an emmc fail. Read the part i've put in bold. The bootloader is missing because your eMMC died. Go and get it replaced and stop wasting your time trying to load firmwares when it simply can't.
西村大一 said:
The bootloader is missing because your eMMC died.
Click to expand...
Click to collapse
It's a logical assumption but not the only possible, I think.
That's why we're still talking about this phone.
The bootloader may be damaged because somebody tried to flash something wrong, for example. This is a more optimistic assumption and it has not been refuted till now.
There is not such thing as boot recovery mode. That is a description of the problem. There are only four modes in which a powered-off S5 would go, no matter the version. Normal Boot, Recovery, Download Mode (sometimes known as ODIN Mode) and Charging Mode.
Click to expand...
Click to collapse
To say the truth, I've never seen this screen before.
I don't know what it is and I'm sure you don't know too.
But look: in recovery the first line says "Android recovery", in Odin mode the first line says "Odin mode".
I've just assumed that the first line in this mode gives the same information.
As for the number of "boot modes", have you ever seen something like on the photo below?
So I want to say: I'd bet 10:1 you're right. But let's give OP a chance to test every possible option before this phone goes to trash.
bbsc said:
It's a logical assumption but not the only possible, I think.
That's why we're still talking about this phone.
The bootloader may be damaged because somebody tried to flash something wrong, for example. This is a more optimistic assumption and it has not been refuted till now.
To say the truth, I've never seen this screen before.
I don't know what it is and I'm sure you don't know too.
But look: in recovery the first line says "Android recovery", in Odin mode the first line says "Odin mode".
I've just assumed that the first line in this mode gives the same information.
As for the number of "boot modes", have you ever seen something like on the photo below?
So I want to say: I'd bet 10:1 you're right. But let's give OP a chance to test every possible option before this phone goes to trash.
Click to expand...
Click to collapse
1. This phone doesn't need to go into the trash. It can be fixed. I mean its fault is written right on screen: mmc_read failed. Isn't that English? Let me translate it for you: sbl2(aboot) can't read anything from the emmc.
2. For the past 3 years I have been running a phone repair shop in Akihabara where 80% of the customers that come in with a Samsung device have had either their eMMC or software go wrong. And in 99% of these cases, the phone was fixed just by changing the eMMC and rewriting all the bootloaders: NON-HLOS, sbl1, aboot, sdi, rpm and tz in that order.
3. In recovery, on my device, it says Team Win Recovery Project. Is it recovery? Yes. ODIN Mode or Download Mode are the same, the name is interchangeable.
L.E. This BOOT RECOVERY MODE looks more or less like Download/ODIN Mode. Except it has been hijacked by the error message (first like in red) and a very very lackluster information: mmc_read failed.
Well, what happens if you hold Power button for 15-20 sec. in this "Boot recovery mode"?[/QUOTE]
Nothing...........................................I have to take the battery out of her phone
西村大一 said:
1. This phone doesn't need to go into the trash. It can be fixed.
So....Firstly,thanks for all the help guys,i have read all comments above and honestly don't undertand a lot of whats been said,due to my lack of inexperience.
At the moment I'm stuck with a non working phone,so have nothing to lose by trying to do something myself,
this emmmc thing.... is it a costly repair?.....can do it myself and gain experience ?,I'm not afraid to disassemble the handset.
Once again thanks for all your efforts.
Click to expand...
Click to collapse
harryj22 said:
西村大一 said:
1. This phone doesn't need to go into the trash. It can be fixed.
So....Firstly,thanks for all the help guys,i have read all comments above and honestly don't undertand a lot of whats been said,due to my lack of inexperience.
At the moment I'm stuck with a non working phone,so have nothing to lose by trying to do something myself,
this emmmc thing.... is it a costly repair?.....can do it myself and gain experience ?,I'm not afraid to disassemble the handset.
Once again thanks for all your efforts.
Click to expand...
Click to collapse
It is going to be VERY difficult because it requires a rework station, a new eMMC chip, flux, and balls (cojones) the size of the Hoover Dam to do it yourself without proper equipment or any know-how. The rework station is 3000$USD+ and the knowledge is priceless. I am really sorry.
Click to expand...
Click to collapse

Solution to the problem of the non-existent OEM unlock option after update to 8.1

With this tutorial you can reactivate de OEM unlock option to install twrp or Downgrade to 7.0 nougat
Files you need:
#Samsung drivers
#Latest stock firmware
#Odin downloader
#Miracle box
NOTE:
Be sure back up your important matters in your phone.
Steps on REMOVING RMM
Be sure your phone is on and its normal(in a sleep state or in home screen) do not turn off.
1. install samsung drivers
2. Disable antivirus
3.extract miracle all zip files
4. Run miracle box loader(run as admin)
5.then set your time to 2 years past.. Ex. Date today, just change the year.
6.then close miracle box.
7.open miracle box loader again(you will see miracle box is working now)
8. Connect the phone.
(Always check the phone. if there something pops up, tick "always allow" then "allow")
9.click "Connect" button on the top left side on miracle box
10. Click "Samsung tab" on the miracle box
11.Click scan on the top right corner
12. Set the mode selection into : Download then hit "Go" button you will notice that your phone is on download mode and its blank. Just let it be on that state its on the process right now.
13. Click on "Reset Reactivation/EE Locks
14. Hit " Start button" and now its on the process.
You will see error on the miracle. That's okay you're almost there to get rid of it.
15.reboot the phone in download just hold synchronously press vol - , home button , and power then wait until you get again in the selection and then select "Continue". As you can see there's no more RMM State: prenormal in info. It means you're almost there..
16. Flash stock via Odin.
Setup your phone
You're done.. Check Dev Options and you see "OEM Toggle".
LINKS:
Miracle Box: https://drive.google.com/file/d/1n_UGxEEmvJFGym0li05GH5tw087_7GjW/view
Download your preference rom here : https://updato.com/firmware-archive-select-model?q=SM-j730&exact=1&r=&v=&rpp=15
Credits: Shivam
Flash stock by Odin with the four files
bl . ap .csc .pda from the nogut firmware?
martinexa said:
With this tutorial you can reactivate de OEM unlock option to install twrp or Downgrade to 7.0 nougat
Files you need:
#Samsung drivers
#Latest stock firmware
#Odin downloader
#Miracle box
NOTE:
Be sure back up your important matters in your phone.
Steps on REMOVING RMM
Be sure your phone is on and its normal(in a sleep state or in home screen) do not turn off.
1. install samsung drivers
2. Disable antivirus
3.extract miracle all zip files
4. Run miracle box loader(run as admin)
5.then set your time to 2 years past.. Ex. Date today, just change the year.
6.then close miracle box.
7.open miracle box loader again(you will see miracle box is working now)
8. Connect the phone.
(Always check the phone. if there something pops up, tick "always allow" then "allow")
9.click "Connect" button on the top left side on miracle box
10. Click "Samsung tab" on the miracle box
11.Click scan on the top right corner
12. Set the mode selection into : Download then hit "Go" button you will notice that your phone is on download mode and its blank. Just let it be on that state its on the process right now.
13. Click on "Reset Reactivation/EE Locks
14. Hit " Start button" and now its on the process.
You will see error on the miracle. That's okay you're almost there to get rid of it.
15.reboot the phone in download just hold synchronously press vol - , home button , and power then wait until you get again in the selection and then select "Continue". As you can see there's no more RMM State: prenormal in info. It means you're almost there..
16. Flash stock via Odin.
Setup your phone
You're done.. Check Dev Options and you see "OEM Toggle".
LINKS:
Miracle Box: https://drive.google.com/file/d/1n_UGxEEmvJFGym0li05GH5tw087_7GjW/view
Download your preference rom here : https://updato.com/firmware-archive-select-model?q=SM-j730&exact=1&r=&v=&rpp=15
Credits: Shivam
Click to expand...
Click to collapse
Plz sir Find out any other solution that can work without using of miraclebox
FRP block is like so simple to bypass the Samsung security in nougat rom . plz find a solution like that to bypass the RMM state prenormal so that Oem unlock is enable .
Well i just try a trick myself , i mean in Rmm state prenormal we can't flash TWRP or we cant root our phone with magisk
But when i was flash a combination frameware on my j730Gm after it there is no pop up msg in download mode Rmm state prenormal than i was quite happy but after it when i was trying to flash TWRP in my phone after it , my phone doesn't boot it start nd then restart so its not work but flashing combination frameware we can bypass rmm state prenormal but we can't switch on our phone its like a bull **** and we can't go in TWRP mode plz help me im in bad situation now i hate Samsung new oreo update battery drain problem and somewhere lags in it ui. it is a worst situation for me now iam no longer to root my phone, no custom rom :crying::crying::crying: :crying:
ahmed10g said:
Flash stock by Odin with the four files
bl . ap .csc .pda from the nogut firmware?
Click to expand...
Click to collapse
Oreo first.
worked great thanks man
Miracle box shows 'can not connected phone' help pls
skayii said:
Miracle box shows 'can not connected phone' help pls
Click to expand...
Click to collapse
install drivers and run as admin
martinexa said:
install drivers and run as admin
Click to expand...
Click to collapse
other version of miracle box fixed problem
skayii said:
other version of miracle box fixed problem
Click to expand...
Click to collapse
I have some random reboots after downgrade. I install twrp and then y flash superstock. I flashed it two times and have reboots. Twice a day
martinexa said:
I have some random reboots after downgrade. I install twrp and then y flash superstock. I flashed it two times and have reboots. Twice a day
Click to expand...
Click to collapse
Why are you telling me this
skayii said:
Why are you telling me this
Click to expand...
Click to collapse
Solo te cuento. Nada más. Yo tuve este problema
Anyone tried this with j730GM, because i follow all steps but oem don't appears
sergioland said:
Anyone tried this with j730GM, because i follow all steps but oem don't appears
Click to expand...
Click to collapse
You must flash oreo stock again
OMG! It works!! Tested on J701F
I had to OEM unlocked because the touch screen stopped working after the phone automatically updated to OREO 8.1 (because the touch screen was replaced and obviously Samsung dropped support for non-oem touch panels in this update) so I have looked everywhere for solution until I found it here http://www.technocaretricks.com/samsung-j701f-touch-not-working-after-update-to-8-1-oreo/
But flashing that TAR file wasn't possible without changing the RMM state.
Thanks a lot, you are a lifesaver
martinexa said:
5.then set your time to 2 years past.. Ex. Date today, just change the year.
Click to expand...
Click to collapse
The PC time, or the phone time?
martinexa said:
16. Flash stock via Odin.
Click to expand...
Click to collapse
Could I flash a rooted rom?
thx.
InvertedMonkey said:
The PC time, or the phone time?
Could I flash a rooted rom?
thx.
Click to expand...
Click to collapse
PC time bro
First. Do the process and flash oreo stock again and then you can see the oem unlock option.. After that you can flash twrp and the rom that you want
deleted.
Thanks. I follow instructions and I can manage to flash twrp
And helios kernel.the only thing I notice after all those flashing is when I check dev option is OEM unlock is gone again. But don't care this moment because I manage to root my phone and that is ok. thanks again
Work on S9 to or only J7?
crizalid8 said:
Work on S9 to or only J7?
Click to expand...
Click to collapse
I dont know, but you can try

Categories

Resources