Related
Long Story As Short As Possible:
1-I Rooted my Sprint Galaxy S4 (with MF9) using Qbking77's You tube instructions (No Probs) !!
2-I dropped the Services.Odex, and Services.Jar into the systems/folder to replace the ones in there using root explorer to get the native hot spot working (It did NOT work) !!!
3-So I flashed via oden a "New" hot spot for rooted roms: "MDCHotspotMod-Odexed" onto the system, and now I am bricked...
I can boot into TWRP, BUT can't flash a rom to the system as it Fails.
I can flash the root "CF-Auto-Root-jfltespr-jfltespr-sphl720.tar" via oden which puts the stock recovery back onto the phone, BUT that wont't flash roms either.
SO, at a complete loss, I factory reset the device wiping everything, and it just boots to the Samsung Galaxy S4 Logo.
I downloaded the following: L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 to try and flash back to stock in Oden, BUT, when I hit "Start" it doesn't do anything but say "The Parameter is incorrect"
This is the Stock MDC File, NOT the MF9 that my phone was currently on...
ANY SUGGESTIONS !!! Thanks guys.
Solved !!! Used MF9 Stock Tar file in Oden !!!
Glad you got it working!
Just in case you were wondering why it didn't work initially - you were on MF9, and you tried to flash the MDC hotspot mod.
And yes, flashing the stock MF9 in ODIN was the right step to fix this. If you now want to install the hotspot mod, make a nandroid backup, download the MF9 version and flash it in TWRP.
jj14 said:
Glad you got it working!
Just in case you were wondering why it didn't work initially - you were on MF9, and you tried to flash the MDC hotspot mod.
And yes, flashing the stock MF9 in ODIN was the right step to fix this. If you now want to install the hotspot mod, make a nandroid backup, download the MF9 version and flash it in TWRP.
Click to expand...
Click to collapse
Any word on getting the hot spot feature working on the MF9 ?? Either Wifi Tether (specific settings), OR the regular built in Hot Spot?? Thanks... Also, I def know about the different software versions I.E. MDL, MDC, and MF9, the site said that particular file would take me back to stock & I would just have to OTA !!! Guess they were wrong, lol...:laugh: Anywho, thanks again, it's nice being able to get help when needed !!!
Ar3ohdee said:
Any word on getting the hot spot feature working on the MF9 ?? Either Wifi Tether (specific settings), OR the regular built in Hot Spot?? Thanks... Also, I def know about the different software versions I.E. MDL, MDC, and MF9, the site said that particular file would take me back to stock & I would just have to OTA !!! Guess they were wrong, lol...:laugh: Anywho, thanks again, it's nice being able to get help when needed !!!
Click to expand...
Click to collapse
Here you go bro, this should do the trick and get a working hotspot mod for you on that s4
http://forum.xda-developers.com/showthread.php?p=40860639
[MOD][Deodex][Odex][MDC][MDL][MF9]Hotspot Mod
gs4 stock rooted running mf9
MENACE_69 said:
Here you go bro, this should do the trick and get a working hotspot mod for you on that s4
http://forum.xda-developers.com/showthread.php?p=40860639
[MOD][Deodex][Odex][MDC][MDL][MF9]Hotspot Mod
gs4 stock rooted running mf9
Click to expand...
Click to collapse
Yep - this is the one that I use as well.
@Ar3ohdee Just make sure that you get the correct version depending on your ROM - odex/deodex and MDC/MDL/MF9
BTW, if you were on stock MDC, you could update OTA to MDL and then to MF9 - that option would have worked too. But flashing the stock MF9 is quicker.
just bricked my galaxy s4 and its stuck at samsung custom screen.. cant get it out of it.... what do i do.. i'm new to this and i new i was going to do this sooner or later....
wahlmart said:
just bricked my galaxy s4 and its stuck at samsung custom screen.. cant get it out of it.... what do i do.. i'm new to this and i new i was going to do this sooner or later....
Click to expand...
Click to collapse
you may need to give us more info than that. what did you try flashing? were you already running a custom rom? mdc, mdl, mf9? did you try manually booting to recovery? (power + vol up)
open a new thread too, may have better luck
Ar3ohdee said:
Solved !!! Used MF9 Stock Tar file in Oden !!!
Click to expand...
Click to collapse
Where'd you find the MF9 Stock Tar file? I screwed up my phone with the wrong version of the hotspot files....
jm1fd said:
Where'd you find the MF9 Stock Tar file? I screwed up my phone with the wrong version of the hotspot files....
Click to expand...
Click to collapse
You mean like from here?
http://forum.xda-developers.com/showthread.php?t=2357471
Bricked on mk2
So I was on stock rooted mk2 with twrp recovery. Did a nand. Flashed kt kernel. Phone wouldn't get passed Samsung splash screen. Couldn't even boot into recovery. Took it to best buy. Tech, if you can call him that, said was bricked and I needed a replacement. Luckily just bought it so free replacement. Played dumb. Probably could have recovered if I Odin the stock firmware. My question is, what do you think caused the brick? Mk2 bootloader? Twrp? The kernel? I flashed plenty of roms and kernels on my s2 without problems. BTW flashed Hotspot mod with cwm and worked.
Hi, i am trying this guide forum.xda-developers.com/showthread.php?t=2415587&page=5 but noticed i am on MF9 baseband and firmware so download files in there to flash to MDC and no succes, first odin says incorrect parameter, then removed .md5 extension and odin says about pit mapping etc.. i am getting crazy this phone seems like UNWRITABLE because on download mode it says "WRITE PROTECTION ENAbLED" i tried diferent frimwares and none worked always same result so i dont know what to do next.
Thanks
ocarela said:
Hi, i am trying this guide forum.xda-developers.com/showthread.php?t=2415587&page=5 but noticed i am on MF9 baseband and firmware so download files in there to flash to MDC and no succes, first odin says incorrect parameter, then removed .md5 extension and odin says about pit mapping etc.. i am getting crazy this phone seems like UNWRITABLE because on download mode it says "WRITE PROTECTION ENAbLED" i tried diferent frimwares and none worked always same result so i dont know what to do next.
Thanks
Click to expand...
Click to collapse
Go here and download this and try a different version see if it helps. This link also provides you with a link to Sammobile where you can get all the firmwares.. http://forum.xda-developers.com/showthread.php?p=39111722
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
BIGSAMDA1ST said:
Go here and download this and try a different version see if it helps. This link also provides you with a link to Sammobile where you can get all the firmwares.. http://forum.xda-developers.com/showthread.php?p=39111722
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
Click to expand...
Click to collapse
Thanks for the reply but this is not what i would call a speciric help for my case but a general one, i jus cant go downloading all flashes there and tools and be playing with it my dear, i have flashed phones before and this one in particular seems like no writable by odin. i think will need any other help!
ocarela said:
Thanks for the reply but this is not what i would call a speciric help for my case but a general one, i jus cant go downloading all flashes there and tools and be playing with it my dear, i have flashed phones before and this one in particular seems like no writable by odin. i think will need any other help!
Click to expand...
Click to collapse
Sorry it didn't help, but I too had the problem... Where no matter whatI did it would fail. And I too had the Write Protection Enabled in download mode, but all I did was re downloaded Odin to my computer, made sure Kies wasn't installed and used original cable on different USB port and guess what? Walla... I was back to flashing and had a working phone once again... But maybe someone else can help you out or you can figure it out so that you can have a working phone once again...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
can someone please please help me i tried to install odin on my phone, and now i have this "system software not authorized by samsung message" and i can not get into recovery or anything else it boots up to this yellow triangle with the message....can someone help me, i can get into odin mode but when i flash anything it boots up to the same yellow triangle with the system software not authorized screen everytime... please please someone help me...this is not my first go around with flashing or installing roms.
Your recovery partition has become corrupted. It's pretty easy to address. You can find Philz recovery in a tar format in the dev threads on here, which you then flash through ODIN, and you'll be able to continue rooting or whatever you were doing in the first place.
Ophbalance said:
Your recovery partition has become corrupted. It's pretty easy to address. You can find Philz recovery in a tar format in the dev threads on here, which you then flash through ODIN, and you'll be able to continue rooting or whatever you were doing in the first place.
Click to expand...
Click to collapse
i downloaded Philz recovery and flashed it odin and on reboot i still get the yellow triangle with system software not authorized by samsung message again....
Which build were you on? Just download whatever build you were on, put phone in download mode and flash that through Odin...That should get you back to stock.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
Which build were you on? Just download whatever build you were on, put phone in download mode and flash that through Odin...That should get you back to stock.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
I will give that a try and see if that will go thru....i know that when I flash anything it says it pass on Odin and when I reboot it goes back to the screen
vk4559 said:
I will give that a try and see if that will go thru....i know that when I flash anything it says it pass on Odin and when I reboot it goes back to the screen
Click to expand...
Click to collapse
Just remember that if you updated to 4.3 there is no reverting back to anything lower than that.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
my question is this fixable from where i am at with the phone, i believe i was on 4.2.2 mk2 just had this phone for about a day so cant exactly remember i know it has a The Blu Kuban rom on it
Mk2 is 4.3 Go into settings > about phone/device and check what it is you are currently on.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
i can not boot into my homescreen or recovery im stuck at that yellow triangle with the error message...im going to find mk2 stock firmware and odin and see what i get
Duh.. What was I thinking...lol The best bet is to go with the MK2 if thats what you strongly believe that you were last on..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
Duh.. What was I thinking...lol The best bet is to go with the MK2 if thats what you strongly believe that you were last on..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
OMG!!!! I got it working Odin back to MK2, now i cant get wifi im stock no root but thank you very much problem solved
vk4559 said:
OMG!!!! I got it working Odin back to MK2, now i cant get wifi im stock no root but thank you very much problem solved
Click to expand...
Click to collapse
There's a thread that contains all the modems/firmware somewhere in dev. Find the one with the MK2 modem and download it. At least, that's one of the common reasons for WiFi to stop working.
So I had this problem and and the solution ended up being pretty simple. After finding this thread along with other info I just followed the instructions in the OP of this thread. I was on stock 4.4.2, which I acquired via a regular ole OTA, and attempted to downgrade without doing any research (mainly because I had downgraded before with no problem, but it had been a while). So I got the "
System software not authorized by Samsung has been found on your phone.
Click to expand...
Click to collapse
" message.
So if you got the "System software..." message, it's probably because before you tried to do whatever it was you did (probably trying to flash to a version below 4.3...maybe it was something else entirely? I don't know you) you had 4.3 MK2 or 4.4 NAE through OTA and, therefore, had the Knox bootloader. The solution for me was to ODIN flash a .tar of the version I was on before I bricked the phone.
Again, here's the link to the thread I followed with stock 4.4.2 NAE. The OP warns that you'll get the Knox bootloader if you flash it, but if you have the "System software" problem, you have already have Knox. It will also wipe all data from your phone.
And the link to the directory mentioned by the above poster.
So I posted this to summarize the solution to this problem...because I over-complicated it and took a while to figure it out. And hopefully to make search results of the problem easier to find.
Summary of the summary: ODIN flash a TAR of the version you had before things went awry; there are basically only two choices: MK2 and NAE. Hope this helps
So first of all, I know better. I'm super pissed at myself, and I'm hoping one of you can help me out of this. I borked my stock NAE ROM by messing with xposed framework after I successfully updated to KitKat this morning. I have since executed what seems to be a cascade of failures, which has left me unable to even ODIN my phone back to MK2 (probably because you can't revert back to the MK2 bootloader once the NAE bootloader is installed).
Does anyone have a TAR or nandroid of NAE that I can download? I've been attempting to download the one that's on MEGA for the last 6 hours, and it's only at 13%. I have file storage available for you to upload it to, if you PM me. I'm really in a jam.
Here's what happened:
I was at 4.2.2 without knox this morning (never updated to MJA or MK2). I decided I didn't care if I had knox, because I wanted kitkat and didn't want to wait for an alternative method of updating without the bootloader. I ODINed MK2, updated to NAE, installed Philz, rooted, and was back in business. Everything went surprisingly smoothly. Then I decided I missed some of the features that nottach xposed gave me with my 4.2.2 ROM, so I installed the framework. When I enabled the nottach module, it got stuck at the sprint screen. It was then that I realized that the last nandroid backup I took was on 4.2.2. ARGH! So I wiped data. Still no boot. Then I decided I may as well just wipe everything and ODIN back to MK2 and start with a fresh ROM. I wiped system, cache, etc., and booted into to download mode. ODIN fails on the aboot.mbn portion. The phone says "Sw Rev. check fail: Found: 5, Binary: 4. I'm assuming that's because KNOX won't let me revert to an earlier bootloader, even if MK2 has knox as well.
Am I hosed? It seems like if I had a working TAR of NAE, I could ODIN it and start from scratch. I'd be totally fine with that at this point, since my phone won't boot at all.
Any help would be greatly appreciated. I've never been in this predicament before, and I've been flashing/rooting phones since WM6. Sigh...
Sorry man. Unfortunately, I am in the same boat. I went back to stock yesterday to take the OTA to 4.4, then re-installed philz and flashed another rom after I was done checking it out. Seeing that Sprint agreed today to let me trade in my phone (L720) for the newer L720T, which is what I should have received in the first place, I have to return to all stock. I tried re-flashing MK2 with odin and got the same same error you did. I have a nandroid of my rooted NAE, so I can get back there, but I do not know how to get back to all stock again.
Dang, that sucks. Seems like you might have to wait on the NAE tar. Did you already try flashing the user-generated NAE tar someone here cooked up?
Sent from my Nexus 5 using Tapatalk
optimummind said:
Dang, that sucks. Seems like you might have to wait on the NAE tar. Did you already try flashing the user-generated NAE tar someone here cooked up?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That tar has been trying to download on my machine for the past 7 or 8 hours, from Mega. Fortunately, a friend of mine was able to download it and I was able to get it from him. I'm in the process of ODINing it now. It didn't fail at the aboot section, so there's definitely hope. I'll report back.
Gabewithkungfugrip said:
Sorry man. Unfortunately, I am in the same boat. I went back to stock yesterday to take the OTA to 4.4, then re-installed philz and flashed another rom after I was done checking it out. Seeing that Sprint agreed today to let me trade in my phone (L720) for the newer L720T, which is what I should have received in the first place, I have to return to all stock. I tried re-flashing MK2 with odin and got the same same error you did. I have a nandroid of my rooted NAE, so I can get back there, but I do not know how to get back to all stock again.
Click to expand...
Click to collapse
Try this user-generated TAR that is posted in another thread: https://mega.co.nz/#!55cWBB6a!v1L7J2MfLMe-gjybYpNSbnDapIVaKtbEJngRQmBcsKU
I'm in the process of flashing it now. It got past where MK2 failed, but it isn't finished yet.
That tar failed for me, about 90% through the system partition.
I was finally able to get my phone up and running. I flashed only the system partition with Heimdall after ODINing failed. After that, it booted right up! I'm out of the woods. Gabe, let me know if there's anything I can do to help you get out of your jam.
dodgeboy said:
I was finally able to get my phone up and running. I flashed only the system partition with Heimdall after ODINing failed. After that, it booted right up! I'm out of the woods. Gabe, let me know if there's anything I can do to help you get out of your jam.
Click to expand...
Click to collapse
Thanks man. Glad you got up and running. I just had to re-flash the NAE modem, philz, and a new rom to get it working. Since there are no complete stock NAE tar files out yet, and the old ones aren't working, I'll just have to wait and hope one gets released in the next couple of days.
---------- Post added at 10:13 PM ---------- Previous post was at 09:52 PM ----------
aaaaaand as soon as I say that, I realize I can't make calls cause the dialer freezes out on any rom I have installed... fml
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
StephenTiz said:
My s4 was rooted about a year ago with the logo SAMSUNG and Unlocked with an open lock below it when it boots up. I gave this phone to my girlfriends daughter and forgot to tell her not to try and update it. I don't remember the way i rooted it or what software it had on it at the time.
So when I go to recovery after it loads into an AT&T logo and tries to install it and it gets to 24%. After this it bootloops. Any help would be appreciated. My phone model is SGH-I337 , also not sure of what the original firmware is.
Click to expand...
Click to collapse
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
No recovery options
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
No recovery options
sway8966 said:
Open lock symbol means your phone is rooted not unlocked.
If you could go to the recovery mode (voloume-up+home+power) it would tell you your firmware version. You could try clear cache, factory reset in recovery mode. If it still gives you the bootloop, you might need to flash the firmware via odin.
You can find instructions and necessary files in here and here.
Click to expand...
Click to collapse
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
StephenTiz said:
Sorry I left that part out. When it goes to recovery i get the blue text that say recovery then it goes straight to the AT&T installing. So no recovery options. I can still get to the Odin dowloading screen though and it says im running Samsung Original software
Click to expand...
Click to collapse
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Woop Woop!
sway8966 said:
One reason I asked you to go to the recovery option was to know what version of firmware you were on before .
Do you remember you were on jelly bean or kick-kat or lollipop? If you do you can find the firmware for jelly bean and kit-kat on the links I mentioned in the previous message.
If you could not recall your firmware, the latest odin flashable firmware we have is kit-kat NB1.
You can flash that one to revive your phone. Then use twoel root to root the phone. After that you can go to lollipop if you want. All the instructions are there.
Click to expand...
Click to collapse
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
StephenTiz said:
It worked. I have tried so many different firmware and kit-kat NB1 worked perfectly. Thank you so much, my girlfriends daughter will be so happy. I think i will leave it unrooted for now. I hope this post helps someone else in the future.
Click to expand...
Click to collapse
I am glad that it works out for you.
Rooting is so easy from that point. Just get towel root and root it. The link also included in my previous post. After the root you might need to disable the AT&T OTA update too. The instructions are also in that post too.