(this thread might also be called "A series of unfortunate flashes")
So, i was trying to upgrade my (obviously rooted) defy from a CM10.1 to CM11. Since this upgrade gave me the error message "set_metadata_recursive: some changes failed", i tried installing CM10.2 to see if it makes a difference and that worked. But i still wasn't able to install CM11. After another unsuccessful flash of CM11, i didn't remember to flash a working rom back on it again and instead rebooted the device. By doing, i was not able to get into recovery mode anymore. In fact, my phone just showd the red Motorola sign and seemingly did nothing. I was though able to boot into flash mode (by holding down the VOL-UP button) as well as into the motorola recovery (by holding down the VOL-DOWN button). The latter did not allow to flash anything, but i was able to delete the cache and so on.
So i decided to try and flash an sbf file. I downloaded sbf_flash.sh (running linux) and i downloaded the "Retail DE, AT, CH" sbf-file from hxxp://sbf.droid-developers.org. I got the device into flash mode and ran sbf_flash.sh which ran smoothly and rebooted the phone.
Now the phone won't power up at all. When i connect it to usb, the white led is on, but otherwise it's not giving me any sign of life.
Is there hope or should resign by smacking myself on the head?
regards.
tmcookies said:
(this thread might also be called "A series of unfortunate flashes")
So, i was trying to upgrade my (obviously rooted) defy from a CM10.1 to CM11. Since this upgrade gave me the error message "set_metadata_recursive: some changes failed", i tried installing CM10.2 to see if it makes a difference and that worked. But i still wasn't able to install CM11. After another unsuccessful flash of CM11, i didn't remember to flash a working rom back on it again and instead rebooted the device. By doing, i was not able to get into recovery mode anymore. In fact, my phone just showd the red Motorola sign and seemingly did nothing. I was though able to boot into flash mode (by holding down the VOL-UP button) as well as into the motorola recovery (by holding down the VOL-DOWN button). The latter did not allow to flash anything, but i was able to delete the cache and so on.
So i decided to try and flash an sbf file. I downloaded sbf_flash.sh (running linux) and i downloaded the "Retail DE, AT, CH" sbf-file from hxxp://sbf.droid-developers.org. I got the device into flash mode and ran sbf_flash.sh which ran smoothly and rebooted the phone.
Now the phone won't power up at all. When i connect it to usb, the white led is on, but otherwise it's not giving me any sign of life.
Is there hope or should resign by smacking myself on the head?
regards.
Click to expand...
Click to collapse
Your battery is dead. Charge it using McGyver method or with an external battery charger.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Your battery is dead. Charge it using McGyver method or with an external battery charger.
Click to expand...
Click to collapse
It's a good idea, but i have another defy here and i've checked: the other battery is 80% charged but the phone still isn't going on...
tmcookies said:
It's a good idea, but i have another defy here and i've checked: the other battery is 80% charged but the phone still isn't going on...
Click to expand...
Click to collapse
Is RSD recognizing it?
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Is RSD recognizing it?
Click to expand...
Click to collapse
Who would have thunk? RSD Lite did recognize the phone and when it started flashing, the phone showed
"SW Update
In Progress.."
So, now what? Which sfb file should i flash?
Anyway, thank you so very much!
Ok, i installed this sbf and it is working!
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTDACH_P014_A009_HWp3_Service1FF
Now i'm thinking i need to root the system again?
tmcookies said:
Ok, i installed this sbf and it is working!
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTDACH_P014_A009_HWp3_Service1FF
Now i'm thinking i need to root the system again?
Click to expand...
Click to collapse
Yes, root again if needed.
I saw your other post in the cm11 thread about how your phone died.
I remember reading somewhere in the forums that you should go to cm10.2 before installing the updated recovery, and then install cm11.
I'm not sure if that's 100% accurate, and I couldn't find the link (sorry).
Couldn't hurt, though, seeing as you'd just have to do a few extra ROM flashes.
Good luck!
tmcookies said:
Ok, i installed this sbf and it is working!
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTDACH_P014_A009_HWp3_Service1FF
Now i'm thinking i need to root the system again?
Click to expand...
Click to collapse
Root, install 2ndinit, install CM10, install CM10.2, install update-recovery.zip, REBOOT (without any wipe), install CM11 and GApps. Hope it helps :angel:
after some effort - great on CM11!
leandrolutz said:
Root, install 2ndinit, install CM10, install CM10.2, install update-recovery.zip, REBOOT (without any wipe), install CM11 and GApps. Hope it helps :angel:
Click to expand...
Click to collapse
I had a simiilar problem - somehow after a similar failed CM11 install, I pressed that "reboot" button and my mb525 was dead. I did as suggested here, Except I happened to have CM10.1 not CM10 on the SD.
However I had a lot of trouble getting a successful boot after installing update-recovery.zip, and then also after installing CM11 with the updated recovery.
Now I have a great well-running defy on CM11. I don't exactly why it succeeded when it did - just repeatedly wipe and install and wipe until it worked.
The defy really runs well on CM11 - very responsive - it is robust both in HW and SW! - maybe I'll myke it my main phone again! (before the S3 or the xperia V) - Samy just ain't interested in my S3 - the community provides the same Android version for my defy as I have on my nexus 7 2013!!!
Many thanks to all who have contributed, especially quarx -
try this http://forum.xda-developers.com/showthread.php?p=48501247
Related
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Do you still see the blue led for custom recovery?
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
fiskenigaten said:
Do you still see the blue led for custom recovery?
Click to expand...
Click to collapse
I see the blue led, but it goes on to green regardless of what I do (power+voldown does nothing). I've tried to access recovery mode several times, but the phone doesn't respond. Maybe I'm doing something wrong.
rperdue5 said:
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Click to expand...
Click to collapse
I've read the guide, but my original SBF is missing ever since MegaUpload's demise. Is it possible to use the Nandroid backup instead?
Auris 1.6 vvt-i said:
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
Click to expand...
Click to collapse
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Hmetool said:
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Click to expand...
Click to collapse
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
arpith.fbi said:
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
Click to expand...
Click to collapse
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Hmetool said:
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Click to expand...
Click to collapse
Hi,
I faced a similar issue but it was since I flashed CM9 for Defy in my Defy+ with 2.3.6(stock) ! Nothing was working and I would get some boot errors! I rectified it by flashing full SBF and then rooting. Well if you want I can provide you with the SBF I have but it is for 2.3.6 and so you will loose downgradability. I have 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage with me. However, you can also give Walter's fixed SBF and Nandroid backup a try
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Hmetool said:
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Click to expand...
Click to collapse
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Auris 1.6 vvt-i said:
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Click to expand...
Click to collapse
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
One question: by full wipe you mean data/cache/dalvik cache or is there anything else that I'm missing?
Hmetool said:
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
Click to expand...
Click to collapse
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Hmetool said:
One question: by full wipe you mean data/cache/dalvik cache
Click to expand...
Click to collapse
Exactly.
Auris 1.6 vvt-i said:
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Exactly.
Click to expand...
Click to collapse
Yep, that's exactly what it is..
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Hmetool said:
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Click to expand...
Click to collapse
Sounds great Well since CM9 nightly is still a long way to go, you may want to dual boot CM7 and CM9. Install CM7 as primary and dual boot to CM9.
Guide: http://forum.xda-developers.com/showthread.php?t=1375156
i did the same thing on my defy im a noob and need alor of help.
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
blackhack516 said:
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
Click to expand...
Click to collapse
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
do u have a link?
labsin said:
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
do u have a link
This is a guide to install cyanogenmod 7.2 on the Motorola Flipside coming from stock Froyo the fastest and easiest way.
1. Root the flipside using superoneclick
2. Download the flipout recovery apk from the flipside development section
Link: http://forum.xda-developers.com/showthread.php?t=1136105
3. Download the Cyanogenmod rom from the flipside general section
Link: http://forum.xda-developers.com/showthread.php?t=1517880
4. Move both the apk and the rom zip to your SD card of your device
5. Turn on your device and then install the apk.
6. After installation open the app and hit install recovery system.
7. When its done hit reboot recovery
8. After its in recovery wipe data, cache, dalvik cache
9. Install rom zip from SD card
10. When complete hit reboot system now
Note: If It does not reboot but instead bootloops, pull the battery and the boot the phone while holding the x on the physical keyboard, when the motorola symbol appears let go of the power button while still holding the x button. once you see the yellow caution symbol with the android press vol up and vol down. In this recovery wip data and cache then rebbot. it should now boot into CM7
Enjoy
Hit thanks please
All Credit Goes To Those Who Made This Possible
Thanks. Going to try this now. Fingers crossed!
Edit: Ok. Successful install on the first try. A few problems though. 3g doesn't work (known issue) and I haven't been able to get link2sd working again just yet. There's a lot more ram to play with and the overall performance thus far is awesome. Its like my phone got a new engine. Everything is fast and zippy and runs as smooth as butter.
Sent from my MB508 using XDA
jovanphilip said:
Thanks. Going to try this now. Fingers crossed!
Edit: Ok. Successful install on the first try. A few problems though. 3g doesn't work (known issue) and I haven't been able to get link2sd working again just yet. There's a lot more ram to play with and the overall performance thus far is awesome. Its like my phone got a new engine. Everything is fast and zippy and runs as smooth as butter.
Sent from my MB508 using XDA
Click to expand...
Click to collapse
Glad to hear that. And yes the 3g doesent work. makes the phone reboot randomly. to fix go into mobile network settings and click use 2g networks only. they worked well enough for me. Happy to see i helped someone out.
Dixinormous said:
Glad to hear that. And yes the 3g doesent work. makes the phone reboot randomly. to fix go into mobile network settings and click use 2g networks only. they worked well enough for me. Happy to see i helped someone out.
Click to expand...
Click to collapse
I didnt have that problem with mine. Didnt have to use that fix as it was working just fine without going through that. Unfortunately I bricked mine after I stupidly reinstalled the flipout bootloader again. (DO NOT do that). Its stuck in an endless boot loop. Im unable to flash the sbf for froyo through RSD Lite because the phone switches off when its plugged into the pc. Which means its bricked unless i can get an official update.zip to flash through the bootloader manually. (i doubt that would even work because you cant downgrade with an update.zip file afaik)
jovanphilip said:
I didnt have that problem with mine. Didnt have to use that fix as it was working just fine without going through that. Unfortunately I bricked mine after I stupidly reinstalled the flipout bootloader again. (DO NOT do that). Its stuck in an endless boot loop. Im unable to flash the sbf for froyo through RSD Lite because the phone switches off when its plugged into the pc. Which means its bricked unless i can get an official update.zip to flash through the bootloader manually. (i doubt that would even work because you cant downgrade with an update.zip file afaik)
Click to expand...
Click to collapse
Why would you reinstall the flipout bootloader?? after installing the cm7 its recovery is installed as well. to enter it all you have to do is hit reboot and the recovery from your power menu. sounds like u messed up bigtime
I know. I really messed up. I think I did it to reflash the rom to bring it back to stock settings. I carried it back to the store I bought it. My warranty is still valid and they don't have the technical means to figure out whether I tampered with the software. I'll likely get a new one or another one worth the same value I paid for the flipside.
I was about to sell it to a friend anyway as I'm more interested in the galaxy nexus. I guess it's not all that bad. If I do get it or a new one back, I'll donate it to someone working on the ROM. So in the end, we all win.
Hi folks!
I think I've messed up my workphone (Defy MB525) in some wierd way.
I had Cyanogen Mod 10 installed and should only do an update to another nightly, but by mistake I chose a cm7-file instead and flashed it. After that I got stuck in a bootloop, whatever ROM i tried to install or how I did :/
I then tried to reset the phone with an original SBF-file using RSD Lite 5.6. The sbf-file I am using is JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf (found in http://forum.xda-developers.com/showthread.php?t=1828639 first post)
My intention fo flash the sbf-file was to restore the phone to its original state and from that point re-rooting it and after that install cm10 again.
But now to my problem, I just cant to do anything with the phone. The screen is all black and I cannot do anything :/
RSD Lite recognizes the phone and I can flash sbf-files to it. It goes to 100% progress but when it is supposed to boot up after flashing, it takes just a second or so...and RSD Lite then says "Passed" on result leaving me with the black screen yet again.
Only time I can see something on the screen is during the flashing. The sceen says "SW update In progress...". Other then that, always black:crying:
Really really stuck here and dont know what to do. If anyone has an idea and the time to help me, I would be in ever grateful!
Best regards,
/marmeladov
http://www.mediafire.com/?muqlua3xu36gcdr
http://www.mediafire.com/?6ecarbv4gxspdx5
Download that, unrar it to a folder
Flash Firmware 1, let the phone boot up and done.
If you want ROOT, enter to Motorola Recovery (Volume up + power, when the Android appears press Volume up + Volume down) then factory reset and wipe data, reboot phone on BL mode (Volume down + power) and flash Firmware 2.
Feche said:
http://www.mediafire.com/?muqlua3xu36gcdr
http://www.mediafire.com/?6ecarbv4gxspdx5
Download that, unrar it to a folder
Flash Firmware 1, let the phone boot up and done.
If you want ROOT, enter to Motorola Recovery (Volume up + power, when the Android appears press Volume up + Volume down) then factory reset and wipe data, reboot phone on BL mode (Volume down + power) and flash Firmware 2.
Click to expand...
Click to collapse
Thanks a ton for helping me in desperate times
I managed to get the phone working again using your files and this link http://forum.xda-developers.com/showthread.php?t=1216982
Then I got the problem with 128mb internal memory, but solved it.
Now I have cm9 up and running with no issues. I tried Epsylons CM10 from http://forum.xda-developers.com/showthread.php?t=1768702 but it lagged and were really really slow for some reaseon :/
Epsylon builds are outdated, you should try Quarx CM10 or CM10.1
Feche said:
Epsylon builds are outdated, you should try Quarx CM10 or CM10.1
Click to expand...
Click to collapse
Thanks, had some issues installing Quarx CM10. Never managed to get it up and running, might've been a kernel issue or something. The led just turns RED :/
On my Google Nexus CM10 was more smooth then 10.1, so I figured I'd better try CM10 on the defy due to weaker hardware. But I might have wrong there since I havent tried.
Did you wipe cache?
Feche said:
Did you wipe cache?
Click to expand...
Click to collapse
Yep, I wiped factory, cache and dalvik. But still chrashed. Will try again today though. Can report back and see if I get better luck
Thanks a ton for trying to help me btw, highly appretiated!
marmeladov said:
Yep, I wiped factory, cache and dalvik. But still chrashed. Will try again today though. Can report back and see if I get better luck
Thanks a ton for trying to help me btw, highly appretiated!
Click to expand...
Click to collapse
Make sure that you are using latest Quarx build (http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/cm-10.1-20130415-NIGHTLY-mb526.zip)
What OS are you using right now? no problem mate
That is the file I've tried but for some reason I just cant get passed the red motorola-logo. the phone gets stuck in a bootloop like this; Red Motorola-Logo, LED turns green...Red Motorola-logo...and then it loops like that. Dont know what to do :/
I use Win 7 x64.
marmeladov said:
That is the file I've tried but for some reason I just cant get passed the red motorola-logo. the phone gets stuck in a bootloop like this; Red Motorola-Logo, LED turns green...Red Motorola-logo...and then it loops like that. Dont know what to do :/
I use Win 7 x64.
Click to expand...
Click to collapse
Do this:
Enter recovery
Wipe cache, data and dalvik
Install Quarx CM10 (http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20130409-NIGHTLY-mb526.zip)
Install 4.1.2 gApps (http://goo.im/gapps/gapps-jb-20121011-signed.zip)
Reboot and let it boot up.
Once you are with CM10, do this:
Enter recovery
Wipe cache, data and dalvik
Install Quarx CM10.1 (http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/cm-10.1-20130415-NIGHTLY-mb526.zip)
Install 4.2.2 gApps (http://goo.im/gapps/gapps-jb-20130301-signed.zip)
Reboot
Good luck
Feche said:
Do this:
Enter recovery
Wipe cache, data and dalvik
Install Quarx CM10 (http://quarx2k.ru/cm10-2ndboot-nightly-defy(+)/CM10-20130409-NIGHTLY-mb526.zip)
Install 4.1.2 gApps (http://goo.im/gapps/gapps-jb-20121011-signed.zip)
Reboot and let it boot up.
Once you are with CM10, do this:
Enter recovery
Wipe cache, data and dalvik
Install Quarx CM10.1 (http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/cm-10.1-20130415-NIGHTLY-mb526.zip)
Install 4.2.2 gApps (http://goo.im/gapps/gapps-jb-20130301-signed.zip)
Reboot
Good luck
Click to expand...
Click to collapse
I think I give up. Dont understand what I am doing wrong. Have rooted and installed custom roms on htc hero, htc sensation xe, htc wildfire, galaxy nexus..but this phone. Neever had even close to the issues I'm having with this one :/
I followd your steps on installing cm10. But when both the rom and gapps are installed and I reboot it reboot the following happends; red motorola-log, blue led - red led. And bootloop. Nothing else :/
Read somewhere that I have to install a kernel separately, is that true?
marmeladov said:
I think I give up. Dont understand what I am doing wrong. Have rooted and installed custom roms on htc hero, htc sensation xe, htc wildfire, galaxy nexus..but this phone. Neever had even close to the issues I'm having with this one :/
I followd your steps on installing cm10. But when both the rom and gapps are installed and I reboot it reboot the following happends; red motorola-log, blue led - red led. And bootloop. Nothing else :/
Read somewhere that I have to install a kernel separately, is that true?
Click to expand...
Click to collapse
Nope, the kernel is on the .zip
Are you sure that you wiped data and cache?
Feche said:
Nope, the kernel is on the .zip
Are you sure that you wiped data and cache?
Click to expand...
Click to collapse
It is advised to wipe cache and Dalvic cache after installing zip files.
Moreover, when I installed full Gapps I got system partition full, so instead I installed minimal Gapps:
http://forum.xda-developers.com/showthread.php?p=34616788
Green lens Defy
I simply dont know if I'm doing something wrong (think not) or if my phone is messed up. But I get the same result after following your guides several times. I cant get passed the motorola-logo after flashing cm10. The Led turns red (indicating somethings wrong?) and then reboots again. Keeps going adn going :/
Hello,
I was running CM7.2 but had an issue so I flashed back to the stock rom. Now I'm trying to flash a new custom rom but for some reason 2ndinit is not working.
I rooted and installed the recovery menu from 2ndinit, but I am not seeing a blue light on bootup.
The phone boots into the stock rom just fine, but I cannot get into the recovery menu.
Any help?
Problem
Cannot access ClockworkMod Recovery menu after installing 2ndInit
What I've tried
Wiped SD
Wiped Data
Reflashed JORDN_U3_6.36.0
Rooted
Installed 2ndinit 2.3
Still no luck, upon boot there is no LED. If I hold the down volume for the entire boot I am met with an android exclamation mark.
Update...
I was able to access an old version of CWM v2.5 using 2ndinit 2.0.
But that brings with it a new set of problems. When trying to access the SD card from CWM, it cannot mount it.
Using ADB and the commands in this forum (forum.cyanogenmod.com/topic/33179-problems-installing-71-recovery-cant-mount-sdcard/) I was able to mount the SD and install CM7.2.
Now I am having GPS and 3g connectivity issues with CM7.2 that I've never had before. It makes me wonder if that hack way of mounting the SD messed up the installation?
I am using the US T-Mobile 3.4.2-107-9 baseband.
Takkun88 said:
Hello,
I was running CM7.2 but had an issue so I flashed back to the stock rom. Now I'm trying to flash a new custom rom but for some reason 2ndinit is not working.
I rooted and installed the recovery menu from 2ndinit, but I am not seeing a blue light on bootup.
The phone boots into the stock rom just fine, but I cannot get into the recovery menu.
Any help?
Problem
Cannot access ClockworkMod Recovery menu after installing 2ndInit
What I've tried
Wiped SD
Wiped Data
Reflashed JORDN_U3_6.36.0
Rooted
Installed 2ndinit 2.3
Still no luck, upon boot there is no LED. If I hold the down volume for the entire boot I am met with an android exclamation mark.
Click to expand...
Click to collapse
Hi there. Any luck getting this to work, as i have the same issue.
I rooted the phone, then installed 2ndInit and when i reboot it has no blue light. When i run the Defy 2mdInit in android it lights up red, then goes green, so appears to be doing all right stuff.
A silly question but one i cant find a answer too, is how to reboot! Im holding down the power button, then selecting power off. Once off i power on again, now technically thats a cold restart. Is there a different method to rebooting/restarting once the green light is on?
Many thanks.
Twister42ZA said:
Hi there. Any luck getting this to work, as i have the same issue.
I rooted the phone, then installed 2ndInit and when i reboot it has no blue light. When i run the Defy 2mdInit in android it lights up red, then goes green, so appears to be doing all right stuff.
A silly question but one i cant find a answer too, is how to reboot! Im holding down the power button, then selecting power off. Once off i power on again, now technically thats a cold restart. Is there a different method to rebooting/restarting once the green light is on?
Many thanks.
Click to expand...
Click to collapse
If you just want to install a custom rom, like cm7 then you don't need to go through that process. You could try this method instead http://forum.xda-developers.com/showthread.php?t=1787541
Please note: This method does not work for BL7 bootloader.
pravarth said:
If you just want to install a custom rom, like cm7 then you don't need to go through that process. You could try this method instead http://forum.xda-developers.com/showthread.php?t=1787541
Please note: This method does not work for BL7 bootloader.
Click to expand...
Click to collapse
Hi There Pravarth.
Im completely new to all this, and this will be the first phone i mod. All i would like to do is install CM 10.2 (Android 4.3) and overclock to 1.0Ghz.
I know the Kernel needs to be changed to overclocking from what i read, so if i do the ROM update via this method, is there a option to overclock then too?
Is there a known issie with 2ndInit not doing the blue light on a reboot?
Many thanks.
Twister42ZA said:
Hi There Pravarth.
Im completely new to all this, and this will be the first phone i mod. All i would like to do is install CM 10.2 (Android 4.3) and overclock to 1.0Ghz.
I know the Kernel needs to be changed to overclocking from what i read, so if i do the ROM update via this method, is there a option to overclock then too?
Is there a known issie with 2ndInit not doing the blue light on a reboot?
Many thanks.
Click to expand...
Click to collapse
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything
pravarth said:
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything
Click to expand...
Click to collapse
Hi again.
I have a Defy with no moto blur and a red lens.
I have read a lot about flashing, and downloaded all the files i needed, rooted the phone then first problem came getting 2ndInit. I was having issues with the phone resetting when connected via usb so got the SndInitDefy_2.3.apk which runs fine, goes through all the steps, red light becomes a green light and says success. But then when i reboot it never shows the blue light.
Also a lot of these guides are Windows based and i dont use Windows i use Linux.
What are the benifits of going to CM10.2 via CM7, is there a reason for this?
Am i rebooting the correct way by doing a shut down then starting the phone again? Is there no way to do a hot reboot rather than a cold reboot?
Thanks again for your replies.
I don't know what went wrong, you should have been able to see the blue led. But, it's much easier to recover by flashing the easy recovery sbf. Then reboot to recovery and flash cm7. I say flash cm7 because the new cm10.2 has a newer version of update-binary so it wont flash successfully.
You need cm7 just for the CWM and bootmenu, from there you can flash cm10.2
You can use this method to flash sbf using linux http://forum.xda-developers.com/showthread.php?t=1076138
pravarth said:
First of all, do you have a defy or defy+? Because some methods dont work for defy+
Then you should probably read this if you new to flashing: http://forum.xda-developers.com/showthread.php?t=1216982
I also suggest going from stock to cm7 and then cm10.2
Cm10.2 is overclocked to 1ghz by default. You dont have to do anything
Click to expand...
Click to collapse
Hi.
I seem to be having more success now, i got SndInit1.4.apk and now it gives the blue light and im in the BootMenu!
So maybe the new version has some issues!
---------- Post added at 05:55 PM ---------- Previous post was at 05:01 PM ----------
Well im now ablle to at least get the bootmenu, however everything is there but it wont mount my sd card. Its shows the following..
ClockworkMod Recovery v2.5.1.8
E:Can't mount /dev/blocl/mmcblk0p1 (or /dev/blocl/mmnblk0)
(No such file or directory)
E:Can't mount /sdcard
Any ideas what is causing this problem?
I did try with another SD card, tried a smaller one thinking its a size issue, then formatted it too and same error message comes up.
Hope im giving enough info, but thats all i can see. Thanks again.
Twister42ZA said:
Hi.
ClockworkMod Recovery v2.5.1.8
E:Can't mount /dev/blocl/mmcblk0p1 (or /dev/blocl/mmnblk0)
(No such file or directory)
E:Can't mount /sdcard
Any ideas what is causing this problem?
I did try with another SD card, tried a smaller one thinking its a size issue, then formatted it too and same error message comes up.
Hope im giving enough info, but thats all i can see. Thanks again.
Click to expand...
Click to collapse
So, I'm guessing you flashed froyo, root and then sndinit? Did you try the easy recovery method?
While I've had similar issue before, I would just assume it was some bad flash and start over. Never wondered why it would happen. It is quite a pain. But most importantly, make sure the battery doesn't go low otherwise it wont allow you to flash.
Usually all such problems go away if you return to stock and try again
Here's what I usually do: Flash froyo stock + super one click to root + 2ndinitdefy2.0apk (It has the new version of CWM). Then flash cm7
OR
Flash froyo stock + easy recovery sbf. Then flash cm7 from stock recovery
Hope this works
Your link to everything about the Defy was very helpful and informative.
Im still on Eclair which seems like that might be the problem, so i guess i need to get Windows...i do have a old Windows XP so will find that old hard drive and boot into that then try the SDlite app and try install a stock 2.2 rom.
At the moment it has a French rom, in English though, so will try find a 2.2 French rom sbf. I think the issue might be 2.1 not being able to use the SD card like 2.2 and up does. Also 2ndInit v2.3 does not work, any other lower version does work, but gives a sd card error.
So my bext question, where do i get a standard 2.2 french rom? There is a link on here, but its the Orange version, not sure if that will be ok.
All i did was root, then 2ndInit. Rooting was a knightmare, eventually used the Motorola1Click Root and that worked, nothing else worked.
Thanks for all your help, knowing all the technical stuff is one thing, knowing all the orders, files and so on is another.
Hi
I tried searching the forum but couldn't find anything similar.
I did something really stupid. I was going to install the CM10.2 ROM by quarx for my defy+ and i just wanted to wipe my mobile to make it clean slate before flashing the new ROM. Turns out, i did an extremely good job at it. I earlier had CM10.1 by quarx on my rooted phone. I went to TWRP recovery and selected advanced wipe and checked all options. When i tried to exit, it actually warned me that my phone is unrooted. I didn't understand why it said that and ignored it.
Big Mistake.
Now my phone is stuck at the Motorola logo, which i expected. But there's no custom recovery, which i did not expect. There is no blue led flashing when i reboot the phone anymore. The stock recovery is still accessible, but it won't install the CM10.2 ROM coz the signature is unverified or something.
What should i do now? Really need some advice.
P.S. my battery was around 20-25% before this happened. So i don't wan't to waste it by trying out something on my own and get caught mid-way while flashing something and brick my phone.
maddy.wolvie said:
Hi
I tried searching the forum but couldn't find anything similar.
I did something really stupid. I was going to install the CM10.2 ROM by quarx for my defy+ and i just wanted to wipe my mobile to make it clean slate before flashing the new ROM. Turns out, i did an extremely good job at it. I earlier had CM10.1 by quarx on my rooted phone. I went to TWRP recovery and selected advanced wipe and checked all options. When i tried to exit, it actually warned me that my phone is unrooted. I didn't understand why it said that and ignored it.
Big Mistake.
Now my phone is stuck at the Motorola logo, which i expected. But there's no custom recovery, which i did not expect. There is no blue led flashing when i reboot the phone anymore. The stock recovery is still accessible, but it won't install the CM10.2 ROM coz the signature is unverified or something.
What should i do now? Really need some advice.
P.S. my battery was around 20-25% before this happened. So i don't wan't to waste it by trying out something on my own and get caught mid-way while flashing something and brick my phone.
Click to expand...
Click to collapse
Flash the respective SBF using RSDLite. If your battery dies, then charge using mcgyver method or a universal battery charger.
Sent from my MB526 using Tapatalk