This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:
Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334
I want to install any other modem but my note 3 does not let me do anything
I use Tweaked S5 Base Note 4 Style rom Android 4.4.2 Version 7.0
Modem is: XXUENB1
Build: KOT49H.G900SKSU1ANI1
I disabled already the reactivation protection, USB DEBUGGING is also enabled.
I use the original USB cable from note 3. KIES is not installed on my pc and I used ODIN as admin.
I got another modem, put my phone into download mode connected of course, and used another modem and put it into (CP/PHONE) in Odin3.10
It says, the flash is successfull but after reboot, the MODEM is NOT changed :"(
I tried several other modems but I can not seem to install any modem! HELP!
I tried to install stock rom via ODIN but it failed as the modem installation...
PS: Safestrap is on my device, my device is of course rooted and I also use PHILZ TOUCH 6
Did you follow this steps?:
1. Download the modem.
2. Unpack the rar file to anywhere on your computer, as long as you can access it.
3. Open up the included Odin and uncheck auto reboot.
4. Click on phone/CP, select the modem.bin, and press start.
5. When you finish the flash, manually reboot your phone back to download mode and flash the modem.bin one more time.
6. When the flash is complete, reboot and you're finished!
It's because you did not power off your phone, or remove the battery before doing the button combo for download mode, let it stay off for 15 seconds then try again.
Should work fine.
Okay, I will try to do the dual Flash and tell you if it works!
First and most important thing for installing/upgrading to Stock MM is clean install (even for Odin flash). That`s why we need a WIPED device. And if you fellow this step, then hopefully you`ll never get any issues (bootloop, abnormal battery drain etc). and this is for rooted devices with custom recovery (TWRP).
I always follow these setps.
DO it at your own risk.
1. Go to TWRP Recovery mode (by pressing volume up + power + home button)
2. Enter in Wipe menu
3. Advance wipe
4. Tick Cashe,Data, System, Internal Storage (except external storage/ Micro SD Card) and swipe to wipe.
5. Go to Reboot menu.
6. Power off the device. (Ignore " No OS Installed " message).
7. Open back cover and pull out Sim cards and Memory card(if any).
8. Download Odin ( I use v.3.11.1).
http://forum.xda-developers.com/showthread.php?t=2711451
9. Install essential drivers for your device in your PC/Laptop..
10. Download Stock MM (latest) Firmware for your Device from sammobile.
http://www.sammobile.com/firmwares/database/SM-J700F/
11. Extract (.tar.md5) it in Odin folder.
12. Go to Download Mode (volume down + power + home button and then volume up)
13. Open odin
14. Connect your device with Original Usb cable.
15. Odin will say "Added" once you connected your device. If not, then check all the drivers and Usb cable.
16. In Odin, make sure "Auto Reboot " and "F. Reset Time" options are Ticked.
17. And make sure "Re Partition" option is not ticked Or marked (checke twice). Don`t touch any other options in Odin.
18. Click on "AP" tab and select the firmware you extracted earlier for your device (.tar).
19. check again everything.
20. If everything is OK. then click on "Start" and sit back.
Odin will display "PASS", when it completed.
And your device will reboot.
After setting your device, power off your device and insert Sim cards (must) and Memory card (optional).
Switch on your device.
Here you can check for the latest software update for your device again. If any update is available, it`ll ask for download and install the latest OS. you should install this update (if available) with wifi/data connection. I`ve installed the latest "J700FXXU2BPG3_J700FODD2BPF9_INS.zip" and after setting the device for the first time, it asked for the OS update again. I downloaded and installed the update and it was "BPH2" with "August Security Patch".. And now I`ve "BPH2" in my device. And I think this the latest update from samsung for J700F.
AND AFTER THAT YOU SHOULD DO FACTORY RESET.
Now you can setup your device according to your wish. And enjoy new stock MM.
These are the steps , I always follow when installing /upgrading any samsung device and really it always provides a very stable and smooth performance.
I just share my procedures.Hope it helps.
HOW TO INSTALL TWRP RECOVERY IN MM J700F
----------------------------------------------------------------------
I`ve installed TWRP in J700F in MM successfully through this procedures.
I just share. Hope it helps.
Do it at your own risk.
1. Download Odin (I use v.3.11.1).
2. Download TWRP for samsung galaxy J7 (Just google it and you`ll find).
3. Open odin
4. Make sure only "F. Reset Time" option is ticked/marked. Here you should untick all options except "F. Resaet Time" ( "Auto Reboot" option should be unticked). And "Re-Partion" option must be unticked. Don`t touch any other options in Odin.
5. Switch off your device
6. Go to Download mode in your device
7. Click on "AP" tab and select "twrp-3.0.2-0-j7elte.img.tar".
8. Check again everything.
9. If everything is OK, then click on "Start".
10. Odin will display "PASS', when it completed.
11. After that unplug your device from PC and press volume down + power button and let your device reboot forcefully. Release volume down button and press volume up + home button as soon as you see the black screen. And your device should now be in TWRP mode.
Now you`ve TWRP in your device.
And Make a Nandroid backup first (it`s for future and safety).
HOW TO ROOT J700F IN STOCK MM
---------------------------------------------
You`ve install latest Stock MM and latest TWRP Recovery in your device successfully. Now you can root your device (certainly if you want).
I`ve rooted my J700f successfully (latest "BPH2" with "August Security Patch") with this procedure.
Do at your own risk.
1. Download Chainfire superSu ( I use BETA-SuperSU-v2.77-20160827190633.zip) and it will give you systemless root ( if you want to learn about systemlees root , here you go
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2. Copy supersu.zip in your sd card
3. Go to TWRP
4. Select SuperSu.zip and Flash.
5.Reboot your device, when it completted.
And your device is now rooted and you`ll find SuperSu app in your app drawer. You can check rooting status with Root Checker App from google PlayStore.
HOW TO INSTALL XPOSED IN J700F IN STOCK MM
-------------------------------------------------
You can install Xposed in your device (J700F) in stock MM.
I`ve installed xposed in my J700F in Stock MM successfully.
Do it at your own risk.
1. Download "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip", " xposed-uninstaller-20150831-arm.zip" and "XposedInstaller_3.0_alpha4.apk".
Please follow this thread :
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2. copy all the files in your sd-card.
3. Install "XposedInstaller_3.0_alpha4.apk" normally.
4. Switch off your device.
5. Go to TWRP.
6. Select "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip" and flash.
7. Reboot your device when it completted.
It`ll take some times to boot your device. After booting, you`ll find Xposed app in your app drawer. Install Modules according to your requirement and compatibility. And enjoy.
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Some Tips for LG G4 Japan aka isai vivid V32
1. ROOT
After reflash TOT firmware,the system is rooted.
so you don't need other app to root it.
If you can't get the access of root, [360 super root] and [KingRoot] would help you.
By the way,a part user of V32 say, they got bootloop after use Kingroot.
and if you load 360super root, then you can't use [Super SU#]
2. Recovery Mode
The correct way to into [Recovery Mode] is:
1) Power off device
2) Press and Hold [Vol - ] and [Power button]
3) When screen shows logo, keep press [Vol - ], release [power button] for one second, then press and hold [Power button]
4)then screen would shows [Factory data reset]
Really appreciate your effort, come from v32 tieba, LOL, wondering why my g4 charges very slow. It only charges at the rate of 0.3a and 4.2v which is unbelievable considering the fact that it supports Quick Charge
still error
Octopu25 said:
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Click to expand...
Click to collapse
I've tried many times, but still failed, there is a solution?
Same broblem
Same broblem
arfans said:
I've tried many times, but still failed, there is a solution?
Click to expand...
Click to collapse
i have the solution
you can pm / inbox / private messages to me if you want
i have the correct dll for yor lg v32
F.Dhil said:
i have the solution
you can pm / inbox / private messages to me if you want
i have the correct dll for yor lg v32
Click to expand...
Click to collapse
I flash it by octopus box lg software .
Now loop reboot and can't enter download mode
Solusion please
Help me for LG V32 bootlop
Octopu25 said:
Hi~ guys, I am an android phone user from China who bought LG G4 Japanese Edition [LG isai vivid V32] last month.
After delete "google play service" in system, then reboot, but the device shows [Security Error Authentication Fail #9]
and automatic started again and again, Ops~ device bricked, GG! :crying:
As we know the resources and softwares are not friendly to LG isai vivid V32, the Firmware is also rare, cos I can't find any tip for LG V32 in XDA,
So it is more difficult for us to save the bricked device.
Due to the [Recovery Mode] still can't solve this problem, here we need to use TOT Firmware to go back to stock,
KDZ is also available to reflash, cos I didn't get the KDZ Files, so I choose TOT to reflash my device.
If your LG V32 device have bootloop or stuck on LG Logo, this method would also help you out.
Now Let me tell you the TOT Method to unbrick your LG isai vivid V32.
Before reflash firmware, you need to download the things below:
1)Download the driver
--[LGUnitedMobileDriver_S52MAN314AP22_ML_WHQL_Ver_3.14.1.exe]
2)Download Both TOT File & DLL File:
--LGV32HL-04-V10o-440-51-OCT-13-2015+0.tot
--LGFLASH_LG_G4_CODEFIRE.dll
3)Download flashtool
--[Setup_LGFlashTool_1.8.1.1023.exe]
4)Download Megalock
--[Megalock.dll]
( I am a new user, due to the policy of XDA forums, so I can not posting outside links,
the softwares which are metioned above, you could google it then download)
Install:
1. Install LGUnitedMobileDriver
2. Install LGFlashtool to C:\
3. Don’t run Flashtool at first, cos you will find that is locked
4. Copy [MegaLock.dll] file to C:\LG\LGFlashtool,
Replace the old MegaLock.dll file to unlock.
5. Extract the TOT file from the Zip,ready for using.
6. Ensure the softwares would work, restart your Windows.
1. Download Mode/Firmware Update
1)power off device
2)press and hold [Vol+] then plug USB cable on connect to pc
3)device shows [Download Mode]
2. Change COM port to 41
1)go to Windows [Device Manager]
2)double click [LGE Mobile USB Serial Port] and tap to [Advanced]
3)change the COM Port to COM 41 then click ok.
4)unplug USB cable but keep device in Download Mode.
3. Import the Firmware
1)Run LG Flashtool
2)in the tool you can see [Model Config]
3)select [Manual Mode],select .dll in files, select TOT Firmware
4)click [Brush Button] change the [LIMO port] to 101
5)on the right side, you could select 1~16 to narrow down the range of searching ports
6)click [ok]
4. Reflash Firmware
1)click the [Yellow Arrow Button]
2)after CRC, tool will show [READY!]
3)plug USB cable to device then the TOT install would be trigged.
4)when process go to about 80%.screens will light up
5)after upload Minios, screen shows in Blue color
6)when flashtool shows [PASS!],it means Success.
Meanwhile screen shows [Factory Reset Statu 3].
5. Reboot
1)unplug USB cable
2)pull battery and reload
3)press power button to Star your device.
PS: If process Failed, I suggest you to unplug USB cable and battery and do this method again.
At last, Here I would like to thank lgviet forum in Vietnam and hyelton who Recognized Contributor on 13th May 2015, 07:07 PM
Click to expand...
Click to collapse
Halo Brother,
Help me please, my device LG v32 bootlop,
could you give me link for that firmware?
Thanks vv much
STOCK ROM
Hello everyone!
I know this phone barely has stock rom files available for download but I want to know if any of you have the marshmallow version LGV3220g to download.
I'm stuck with 5.1 and I can't even update it on OTA because I'm not in Japan...
Its January 2019 and I have purchased another G3, since I had to do this all over again, let me write how I did it :
from :
Installed Android Version : 6.0
security patch 2016-08-01
kernel 3.4.0
V30n-EUR-XX
to :
CleanRom 3.2
V30g-GLOBAL-COM
Steps:
1--> install ROM V30B (MM - MarshMallow), this root method only works with MM
1.1 --> install LG Mobile Driver into windows PC
1.2 --> download LG FLASH TOOL into windows PC
1.3 --> connect phone to computer and install ROM V30B
2--> ROOT the device
2.1 --> copy kingroot(.apk), AutoRec(.apk), twrp 3.2(.img), cleanRom 3.2(.zip) to the phone
2.2 --> install KingRoot
2.3 --> install AutoRec (TWRP)
3-->Update TWRP and install CleanROM
3.1 --> install TWRP 3.2.3
3.2 --> install CleanROM
STEP 1 : Install Stock V30B MarshMallow ROM
download ROM from : http://storagecow.eu/index.php?dir=Xda%2FLG+G3%2FStock%2FD855%2F
file : D85530B_00_1217.kdz
download LG FLASH TOOL from : http://www.mediafire.com/file/fwrcd3pdj0svjtb/LG+Flash+Tool+2014.zip
download and install into windows PC : LG Mobile Driver from : https://www.lg.com/us/lgeai/Drivers/pages/mobile-drivers.html
file : LGMobileDriver_WHQL_Ver_4.2.0
Install the LG driver, extract contents of LG Flash Tool 2014.zip into a folder, copy D85530B_00_1217.kdz into that folder, power off the phone.
To enable download mode in the phone, press VOLUME UP and connect the phone to the windows PC via usb cable, when the phone displays downlod mode you can leave it.
Start LGFlashTool2014.exe, select the D85530B_00_1217.kdz, press CSE Flash
wait for the process to complete, phone will reboot, then it will boot into android and start optimizing apps
check phone software version , must be V30B
STEP 2 : ROOT the device
download 1__KingRoot4.5.6.apk and 2__AutoRecMMD855.apk from : https://mega.nz/#F!3woXDCSK!D70sB0o-PpyKBAAH2_ujYQ
download latest D855 TWRP .img from : https://eu.dl.twrp.me/d855/
file : twrp-3.2.3-0-d855.img
download CleanROM 3.2 from : https://forum.xda-developers.com/lg-g3/development/d855-clean-rom-1-0-t3629917
file : D855_CleanROM_3.2.zip
Copy all files to phone (1__KingRoot4.5.6.apk;2__AutoRecMMD855.apk; twrp-3.2.3-0-d855.img;D855_CleanROM_3.2.zip)
Turn ON Wireless/ conect to an Internet source (required for KingRoot)
using the file manager install 1__KingRoot4.5.6.apk, you will be prompted to enable Unknow Sources (go to Setings --> Secutiry --> Unknown Sources (check it))
run KingRoot, atempt the root process and wait for it to complete
using the file manager install 2__AutoRecMMD855.apk
run AutoRec to install TWRP, press the large M button, phone will rebot into recovery mode
STEP 3 : Update TWRP and Install CleanRom 3.2
Its required to update TWRP before installing CleanRom 3.2
inside TWRP 2.8.7.0 (installed by AutoRec) choose :
Press Install -> Click on bottom left Images -> select twrp-3.2.3-0-d855.img
Choose Recovery, TWRP will be installed, go back to main menu
Choose Reboot -> Recovey (PHONE WILL REBOOT)
Press Wipe -> Advanced Wipe -> Dalvik ; Cache ; Data ; System
Go back to main menu
Install -> D855_cleanROM_3.2.zip
follow the instalation guide, JOB DONE!
for my phone I use :
--> DO NOT USE new gpu drivers
--> NEVER UPDATE magisk, keep 17.1
--> Universal Cust
--> NO AROMA
Thanks to : MESA for CleanROM 3.2
Thanks to tute123456 for this tutorial root-twrp-marshmallow-d855-30b
Also, this is a great video that I found with the complete rooting process : https://www.youtube.com/watch?v=8VOgM3jLas4
Great!
Thanks @edmundopt - worked like a charm :good: