Database Users

Need PIT partition file for at&t S4

Hi Guys,
I had rooted my phone using motochopper then yesterday I received OTA update. Everything seems to be fine then later I started getting Samsung Text-to-Speech engine has stopped working everytime I opened Gallery. It was very frustrating, so I did factory Reset. After Factory reset when I go to last screen to startup my phone(Learn about Key Features:Air view, Air gesture) and click Finish. I get "Unfortunately Settings has stopped" error. I found the stock firmware here hxxp://galaxys4root.com/galaxy-s4-stock-firmware/ But every time I use Odin I get PIT Partition not found.
Please help guys, I am stuck, don't know what to do now. :crying:

You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.

i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.

scott14719 said:
You can get the stock firmware from the "Development" section and also a step-by-step guide how to do it...search the development section for it. You can also find a lot of information about the issue you are having with the "stopped settings" error, again you can search for the info. I would also suggest you research ODIN to make sure you have the correct boxes checked so you don't hard brick your phone. Good luck.
Click to expand...
Click to collapse
I checked all appropriate settings for ODIN before upgrading the firmware. I got the same error all the time. I will research "Stopped Settings" error and let you know if I find anything. Thanks for the quick response.

kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?

zukaa12 said:
Hi I am choosing "Firmware upgrade and initialization" option to download the firmware. I put my phone into recovery mode as per steps mentioned and click "Start Upgrade" it takes around 40-50 minutes to download the firmware, then after sometime I get failed to connect to the phone. It's weird the "Start Upgrade" option is only enabled after I properly connect the cable and Kies have recognized the phone. Then why after some time it would say failed to recognized please try again?
Click to expand...
Click to collapse
weird mine never said enter recovery. what i did was plugged in my phone and i did the ""Firmware upgrade and initialization" then it gose through all the agreements and downloads the firmware. then it'll auto boot in to download mode for the install. are you using the stock usb? which port are you using on your computer? is KIES up to date? do you have the right drivers?( then again i think kies will install them but just in case) try already being in download mode.
also you can try this http://forum.xda-developers.com/showthread.php?t=2261232

I tried same at&t stock firmware but this time I used Odin 3.0.7 like Adam recommended in another post to upgrade and it worked like a charm. Before I was using Odin 1.8.5 and I was getting Missing PIT partition error all the time.
Thanks all for the quick response.

kuraijay said:
i had the same exact issue and tried ODIN. didint work. i used to KIES to restore my firmware and it works again! try using KIES.
Click to expand...
Click to collapse
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??

stumpmuncher said:
I get different errors trying to flash stock ROM in Odin too. Missing PIT error mostly. Now phone is stuck at bad upgrade screen. Kies won't detect phone to use that method to restore either. Any other suggestions??
Click to expand...
Click to collapse
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2

What NOT to do with a new S4
RMXO said:
Read the post above yours. Use the latest Odin 3.0.7.
-Sent from my Samsung Galaxy Note II using Tapatalk 2
Click to expand...
Click to collapse
Did. Wouldn't have appealed for help without first making sure I followed the OP's instructions perfectly. I know the rules. I read the other posts before posting. I'm here for 2 things: To learn how to get the most potential out of my devices and to contribute from my experiences when I can. Thanks for your prompt reply though...
EDIT: solution to my stuck phone problem was solved by visit to ATT store for replacement. I can tell you what happened to my 7 day old device that brought it to the point where it would not load through Kies or Odin:
Eager to remove Samsung & ATT bloat stuff, I rooted using motochopper then used Titanium Backup to remove all ATT related apps & some of the Samsung apps. I got the unlock icon on lock screen as others have after root. I removed Superuser and replaced with SuperSU. Unlock icon went away and phone status went back to official. This is when I started noticing the Samsung text-to-speech program would frequently FC during the launch of few apps. Internet would also FC during certain operations. I read of others having success installing the stock ROM with ODIN and decided to give it a try. At first I got the no PIT error then finally after a few repeated attempts it moved past that point but then failed for some other reason during installation. I did notice a little activity on the progress bar on my device during Odin flash, but when the flash failed, that was it. My device was locked up. My PC & Kies would detect the device but could never connect or mount the device. My guess is that some of the Samsung apps I deleted were tied to the Samsung engines and the lack of their presence somehow caused FCs. Comments and questions appreciated.

Got the same Odin Mode Recovery Kies problem, No Pit fixed with ODIN 3.07 used PDA and loaded normal firmware.

Unrooting G900A AT&T usa

I rooted my phone two weeks ago with towelroot and disabled Knox with supersu.Note: my device status said official I'm still running stock firmware. Have to send my phone back for warranty problem so I unrooted with supersu and reset my phone. So now when I look at my device status it says custom (never flashed any roms or nothing) so I factory reset and notice unlock padlock and custom on my reboot startup screen. I also put phone in Odin mode the binary still said Samsung official but now the other say custom. And Knox says 0×0. I was told to use Odin so I installed odin3v3.09, drivers, stock firmware on the PC tried to flash it but got a Auth: Fail in the left lower box.
My replacement phone will be here today and will send the old back Monday to give me a couple more days to figure this out. What did I do wrong?
PLEASE HELP!

UPDATE
I just notice when I was using Odin I tried to flash G900AUCU1ANCE stock firmware. My phone says I'm running G900AUCU2AND3. I wonder if that's why I've been getting that auth: Fail
Where can I get the G900AUCU2AND3 stock firmware from?

Try going to the sammobile website (cant post link because I'm a new member). It should be there
Sent from my SM-G900F using XDA Premium 4 mobile app

tmadekush said:
I just notice when I was using Odin I tried to flash G900AUCU1ANCE stock firmware. My phone says I'm running G900AUCU2AND3. I wonder if that's why I've been getting that auth: Fail
Where can I get the G900AUCU2AND3 stock firmware from?
Click to expand...
Click to collapse
Your warranty should be honoured because it still shows Knox 0x0. But it would be prudent to resolve the custom message as you are trying to do. It's showing custom because you disabled Knox. Flashing a full stock firmware should restore Knox and resolve the custom message.
Odin flashes can fail for many reasons e.g. trying to flash non-Odin versions of firmware, bad signatures, poor quality USB cables, wrong firmware version e.g. one meant for a different phone, et cetera.
Back up your files, then do a full system reset from the settings menu. Then put your phone into download mode and use Odin to flash a full stock firmware. Ideally use the latest firmware version for carrier that the phone originally came from (i.e. it should match the baseband). Google will find many firmware repositories e.g. sammobile, samsung-updates and this site.
.

[Q]Samsung SM-N900 bricked

Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..

@bluws just download any stock firmware for your phone and flash it later with Odin. Use Odin 3.04 or 3.07 if 3.09 failed.
tetakpatalked from Nexus 7 flo

Make sure you are using correct Ver of root, make sure kies not running in bag round when you flash threw Odin, take care of antivirus
Sent from my SM-N9005

bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Try to connect your phone from the KIES program in a mode of emergency restoration of firmware by Model phone type and Serial Number of the phone. This may take several hours. To do this, you need a good internet.

bluws said:
Hello guys,
I tried to root my SM-N900 this morning. I've root my Note 2 before and i thought it would just be the same. Unfortunately as i am starting to root with Odin, i've waited for hours but Odin is still not done with the phone and the download bar progression thing didnt move an inch. So with regret i turned off the phone and now it is stuck on "firmware upgrade encountered an issue" screen. I tried to download firmwares from sammobile but failed at 99% with a message of Unknown Network Error. So with that, are there any other solution possible? I've also tried Kies, but it wouldnt recognize my phone..
Click to expand...
Click to collapse
Did you previously disable Knox? If you didn't, that can cause random problems, read about it in the newest Chainfire's thread in recent post:
http://forum.xda-developers.com/showthread.php?p=55325329
What kind of root process did you use Odin for?
tetakpatalked from Nexus 7 flo

Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.

bluws said:
Ty guys i got it working just by flashing a new stock rom. Tho now i am unable to call (no mobile services). Apparently it says that there are no sim card or something like that, does the region of the firmware i downloaded have something to do with it. Im living in indonesia (xse) but downloaded the russian stock i think.
Click to expand...
Click to collapse
Good it works again now!
Maybe it is just a baseband problem? I'm sure you will find an asian baseband only and be able to flash it.
Is your IMEI number still there? If yes, make sure to create backup of it now.
tetakpatalked from Nexus 7 flo

[Q] Revert Samsung Galaxy Grand Prime SM-G5030AZ back to stock Rom after Kingroot

Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.

HammersmashDFCC said:
Hello to you to you all. I wish I never rooted. I need to know what I did to my phone now that I used Kingroot on this Grand Prime. I also need to get my phone to not say custom in about phone. I tried Samsung Kies and I got error messages. Do I need to flash a stock Rom? Is my bootloader damaged? Please, I beg you experts please help me?. Thank you all in advance for your time and effort.
Click to expand...
Click to collapse
Use super su, and un-root your phone with the option for un-root. Or just flash stock rom that's match your model.

I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.

HammersmashDFCC said:
I apologize but I have tried to give supersu superuser status although supersu would have those permissions from kingroot, it could not update it's binaries. When I did a full unroot with kingroot, my phone still was not allowed to receive over the air updates via wifi. About flashing a stock Rom I can reroot with kingroot but I cannot locate any stock Rom for this phone. I did a lot of research trying to find one. Can you please advise to as to where to go so that I can locate the stock Rom? Thank you.
Click to expand...
Click to collapse
here. just use odin to flash. and choose the correct version of your phone.
http://www.sammobile.com/firmwares/search/grand prime/

Thank you very much
I really appreciate you time and effort that you did.

Getting the stock firmware
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ?.

HammersmashDFCC said:
I have searched that particular location and my model is SM-G530AZ and it's not found in that directory. I am at a checkmate. Unless I can use a firmware from one of the Grand Prime phones with a similar model but that to me does not make too much sense... Or maybe it does. But regarding my particular model it doesn't exist (or so it seems. Can one please come up with a solution? Flashing the Rom is the only option at this point so need download stock. Thanx everyone. ��.
Click to expand...
Click to collapse
Since your model is a dual with lte i guess you can use the 530h firmware. but i'm not sure.

My Model's Definite Firmware
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.

HammersmashDFCC said:
Thank you very much for that info. But its not a definite so I wouldn't go ahead with it. I find it very interesting that for every other model of the Grand Prime there is a definete stock software available for the user. But when it comes to mine there isn't. So if anyone can possibly find it I'll be so happy.
Click to expand...
Click to collapse
I am facing the same challenge with my G530AZ model aswell. I am not even able to see my Network mode menu to change after realizing my device can not receive 3G signal only Edge. I located this menu after rooting to unlock my phone however it has completely vanished as I may put it. Any news on a compatible stock rom will be appreciated aswell.

Solution for reverting phone fully into stock (SM-G530AZ) & any other Samsung
I wasn't going to let Samsung Customer Service get away with not be able to give me info on how to get the code for emergency recovery mode using Samsung Kies. I got the Samsung Rep to tell me how to get the code in Kies all the time (in emergency recovery mode). Have the usb plugged in first without the phone connected to it. Then hold down the volume down key on your phone when it's OFF and after the volume down key is being held down, connect your phone to the USB while the Samsung Kies program is running. The code should show in Kies after that. Then go to the tools selection in Kies and click on the Recovery Mode option and you follow the further instructions. I didn't try this yet but I will very soon. I wrote this right after I got off the phone from the Samsung Rep. I really hope that this is a true method that works. If yes, cheers to all!

Sorry, can't be so trusting with Customer Service Rep of Samsung
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.

sm-g530az
HammersmashDFCC said:
I apologize for my previous post in a way. Well first of all this model SM-G530AZ (my model) isn't compatable with Kies as in that I got a message from Kies saying that. Therefore there was no way for me to know that the holding of the volume down method will generate the code for the emergency software reflash on this model. Finally, if that Rep was able to make that mistake I doubt whether it works for phones that are compatable with Kies.
Click to expand...
Click to collapse
Any luck on flashing the sm-g530az. I try most of the firmware from sammobile. But no luck. And, sm-g5630az firmware is not in Sam Moblie.

Only solutions I can think of...
Earlier in this forum a member said that you can possibly use the 530h firmware, being that they are basically the same firmware as ours although he said he's not totally sure. If Kies 3 and the newer version of Kies (the name slipped my mind, but the message pops up anytime one installs Kies 3 asking if you want to download it) don't work because a message comes up saying that the phone doesn't support initializing, maybe what that member said is the only possible option for right now. But now I'm thinking that you can do anything to your phone which will be "normal" looking as far as for the things which the customer service reps look for see if the phone was tampered with which voids the warranty, in a repair center they can wipe all from the phone and put stock software. But the issue with that may be that the binaries that are on you phone now may cause your phone to get bricked being that their software uses different binaries. This is when they plug it in by them the phone need to load to 100% and if it stops in middle the phone is bricked. So they told me that there is that risk. If you can fool them into trying to do that flashing process on your phone because they seem to think that the warrantee is intact and it doesn't get bricked, you are good to go (I visited a Samsung repair center and found this out being that I had issues with them). But in your case that may or may not be possible . Good luck.

Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!​
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here

zomgitsanoob said:
Your instructions were slightly off. Here's what worked.
1) install KIES 3. DO NOT PLUG IN PHONE
2) go to tools -> firmware upgrade and initialisation in KIES
3) device id = SM-G530AZ ; serial number is under battery
4) allow KIES to download the firmware
5) place phone in ODIN mode/Emergency Download Mode (hold VOL DWN and HOME while powering on ) then plug in phone to computer via USB
6) allow KIES to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) PROFIT! After the phone restarts, it will take you through initial set up (like when you bought it)
YOU WIN!! Even the Mobile Data is Set-up Already!​
All your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
BONUS::
about: device status: official
odin mode:
current binaryfficial
system status: official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
OPTIONAL:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
did this work on the build g530az of5?

Cricket has not yet made lollipop available to me (I keep checking), so I have not been able to test it.

I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!

iseewhatudid said:
I have the SM-G530AZ and I'm trying to restore stock using the method you provided but I'm stuck at 8% update/initialization. I've tried everything I can think of to unbrick my phone. Please help!
Click to expand...
Click to collapse
try again following those directions thoroughly, just worked for me earlier today, make sure you're on a good internet connection, and don't plug in the phone (which will be in download mode) until you absolutely have to. hope all goes well.

Thanks a million
zomgitsanoob said:
your instructions were slightly off. Here's what worked.
1) install kies 3. Do not plug in phone
2) go to tools -> firmware upgrade and initialisation in kies
3) device id = sm-g530az ; serial number is under battery
4) allow kies to download the firmware
5) place phone in odin mode/emergency download mode (hold vol dwn and home while powering on ) then plug in phone to computer via usb
6) allow kies to send image to phone. Have some ice cream and egg rolls and do not touch anything.
7) profit! After the phone restarts, it will take you through initial set up (like when you bought it)
you win!! Even the mobile data is set-up already!​
all your screwups (soft brick, deletes systemui....) are forgiven. Don't do it again.
bonus::
about: Device status: Official
odin mode:
Current binaryfficial
system status: Official
used knox status checker from gp.... 0x0 !
I think we just got our warranty back, baby :good:
Optional:
If you still want root, (re)reroot using the established method here
Click to expand...
Click to collapse
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in

same exact issue
BXXCLISIVE said:
thank you so much man i had rooted my galaxy grand prime from cricket with kingroot ..couple hours later once my phone died and restarted it said my phone was flashed and locked due to unauthorized firmware ..i could not get into my phone at all.. Only able to see odin mode (download mode) ..so i did some research and could not find sm-g530az firmware anywhere for download. So i went to cricket they told me my phone is no good i had to get another one. I was furious ..but didnt give up since im pretty mobile phone and computer savvy. I still did some research found this thread and downloaded kies 3 .it did not recognize my phone for connection ..so i downloaded kies 2.6 and kies lite.
It just kept saying connecting ..so i then followed ur steps above and it brought my phone back to life ..crazy how cricket and even samsun themselves did not know what to do as i was on the phone with both of them ..they told me my phone is no longer good ..smh ...anyways thank you sooo much ..saved me about $150.
I hope this helps anyone else that is in the same position that i was in
Click to expand...
Click to collapse
when i follow step 3 where i have to put in the model of the phone SM-G530AZ i enter it and it says please check model name and try again i see it says somthing about the serial number how is it supposed to be entered model name;serial number? becuse just using the model number doesnt get me passed anything :crying: :crying:

O2U Note 4.... Broken?

So this is a bit of an odd situation my friend is having. He bought his Note 4 off eBay over a year ago, and it was (and still is) a rooted mess. And I mean a big mess. Now I'm trying to help him fix it, because he can't update his phone at all whatsoever from 5.1.1. So I send him 6.0.1 firmware for O2U and have him go into Download mode, odin, all that fun stuff. Download mode says SM-N910T. Settings says SM-N910F. Anyway, he tries flashing the firmware via odin, fails, I have him try multiple things (I'm pretty tech savvy when it comes to this type of stuff) but it always failed. Also, "Current Binary" and "System Status" are both custom, and the KNOX counter is 0x1.
So what I'm asking is, how to fix this problem for him? What steps should he take (or should I help him take)? Is this actually a T-Mobile phone from the USA, but rooted to work with O2 sim cards? The hell is going on here?
Thanks for any replies, and all suggestions will be taken seriously and addressed.

Install the Phone INFO Samsung APK by vndnguyen and see what it's written there.
Get the serial number - example: mine is a 910C with serial RF8H70D.... and so on (obviously I can't write it all here)
With this serial number try with Samsung Smart Switch on the PC and see what info you get. Also you have the possibility to get the latest original firmware installed on the phone.
Good luck.

Gunshots911 said:
So this is a bit of an odd situation my friend is having. He bought his Note 4 off eBay over a year ago, and it was (and still is) a rooted mess. And I mean a big mess. Now I'm trying to help him fix it, because he can't update his phone at all whatsoever from 5.1.1. So I send him 6.0.1 firmware for O2U and have him go into Download mode, odin, all that fun stuff. Download mode says SM-N910T. Settings says SM-N910F. Anyway, he tries flashing the firmware via odin, fails, I have him try multiple things (I'm pretty tech savvy when it comes to this type of stuff) but it always failed. Also, "Current Binary" and "System Status" are both custom, and the KNOX counter is 0x1.
So what I'm asking is, how to fix this problem for him? What steps should he take (or should I help him take)? Is this actually a T-Mobile phone from the USA, but rooted to work with O2 sim cards? The hell is going on here?
Thanks for any replies, and all suggestions will be taken seriously and addressed.
Click to expand...
Click to collapse
Looks like its an refurbished note 4 original motherboard is N910T and faked with N910F software cuz N910F has more value in Market.
So the bottom line is you have N910T Tmobile note 4 and you have to flash N910T firmware but after flash firmware from odin you have to immediately boot into stock recovery by pressing 3 button combo and do factory reset to get clean fresh opreating system otherwise it will get stuck in a bootloop at samsung logo.
First boot after flash and factory reset can take upto 10 minutes.
You can get firmware from www.sammobiles.com/firmwares
Or from link below for faster download.
https://androidfilehost.com/?fid=890129502657581810
Remember once you flash this latest marshmalow firmware there is no way you can ever downgrade to 5.1.1 again.
Good luck

Trex888 said:
Looks like its an refurbished note 4 original motherboard is N910T and faked with N910F software cuz N910F has more value in Market.
So the bottom line is you have N910T Tmobile note 4 and you have to flash N910T firmware but after flash firmware from odin you have to immediately boot into stock recovery by pressing 3 button combo and do factory reset to get clean fresh opreating system otherwise it will get stuck in a bootloop at samsung logo.
First boot after flash and factory reset can take upto 10 minutes.
You can get firmware from www.sammobiles.com/firmwares
Or from link below for faster download.
https://androidfilehost.com/?fid=890129502657581810
Remember once you flash this latest marshmalow firmware there is no way you can ever downgrade to 5.1.1 again.
Good luck
Click to expand...
Click to collapse
Thanks so much! Everything is flashing on his phone right now like it should be. Appreciate it a bunch!
I also used samsung-firmware.org. I would use sammobile but I only had enough on my card for a 48 hour upgrade.