Database Users

[MOD] Custom Boot Screen (for Gingerbread ROM's)

Well I had been getting asked a lot lately about the GB ROM's and my original boot screen packages that I had created where I modified a param.lfs to contain no boot image and allowed a script to place whatever image you wanted in it's place for a custom boot logo. In the past I had edited the param.lfs for the AT&T i897 bootloaders which does not work with the GB boot loaders.
This is not the boot animation, nor the kernel logo, but the first logo your phone displays when it's turned on.
Anyhow, I re-wrote the param.lfs to allow a blank for the logo.jpg that Gingerbread calls upon in the bootloader and it works great. So for all of you that used my boot screen package in the past for i897, i9000 and t959 2.1, 2.2 and 2.2.1 ROM's, here it is again for 2.3+ ROM's.
This should also work fine for Vibrant but I will check in case any T959 people are scoping this out.
These will not be compatible with CM7 (due to the proprietary fs used on param.lfs)...
Big thanks to TRusselo for being a BETA tester, tossing in the latest ODIN package and writing the readme as well as contributing the JPEG's offered in the package. I decided to keep the Canadian boot screens for you northern neighbors on the Roger's network up there...
Donations are always welcome but not required, press THANKS, follow me on Twitter or like my cause on FaceBook.
Download the package below...
http://dl.dropbox.com/u/19201431/Files/MobileTechVideos_GB_Boot_i897_t959_i9000.zip

^ Appreciate this....
and good to hear from ya again.

For2ndtwin said:
^ Appreciate this....
and good to hear from ya again.
Click to expand...
Click to collapse
No problem. I'm still really active, here on XDA. Just try to limit my content to my website since they monitor me very heavily...

FROYO VIDEO!!
make sure to read the read me file!!!!
For i897 Froyo/ Ecliar /Gingerbread bootloaders
http://download1073.mediafire.com/teuilo1p1h7g/n3l6527tvt7a4v5/MobileTechVideos_i897_Boot.rar
with images included : http://dl.dropbox.com/u/19201431/Files/i897_Froyo_Gingerbread%20boot%20fix.zip
note: jpg image called logo_ATNT.jpg (even for rogers) READ THE README!!!
For i9000 Gingerbread bootloaders running on captivate
http://dl.dropbox.com/u/19201431/Fil...t959_i9000.zipnote: jpg image called logo.jpg
FOR i896 ROGERS Gingerbread bootloaders
http://dl.dropbox.com/u/19201431/Files/i896_gb_boot_screen.zip
note : final image file called logo.JPG <captial JPG is IMPORTANT> and **not** ATNT like captivate version~!
READ THE README!!!
Here is the GINGERBREAD PICS that are included.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here are some more single images:
fuloplori said:
Thought I'd share some pics that I've used
View attachment 736044View attachment 736045View attachment 736046View attachment 736047
Cheers
Click to expand...
Click to collapse

see above...

Done, soft-bricked (Odin failed) but got back into DL mode and re-flashed. I've got the i896 logo up there now.
Thanks a lot!

yeah odin sometimes does that... the newer odin does that LESS.. lol.
i soft bricked a few times using this.
just keep forcing the params until it passes, no need to go back to stock!
with GB button combos, and the soft brick, i found:
Vol Down + USB = Download mode
Vol Down + Pwr = Soft brick screen.
hope that helps.

Just an fyi to anyone not familiar with it, but you will have to make sure you have your screen active when running the batch file so that you can click Allow to the superuser permission request when it attempts to mount the partition.
This wasn't noted in the readme, someone without much experience might miss it.

Just a question but why are there some screens with "AM HUNG" as the name and not Samsung?

kimchi0400 said:
Done, soft-bricked (Odin failed) but got back into DL mode and re-flashed. I've got the i896 logo up there now.
Thanks a lot!
Click to expand...
Click to collapse
When you soft bricked and reflashed did you have to do the whole rom or just this process in particular?

impulser91 said:
Just an fyi to anyone not familiar with it, but you will have to make sure you have your screen active when running the batch file so that you can click Allow to the superuser permission request when it attempts to mount the partition.
This wasn't noted in the readme, someone without much experience might miss it.
Click to expand...
Click to collapse
thanks i updated the readme in the dropbox link above.
man dropbox is amazing!

jonnyg1097 said:
when you soft bricked and reflashed did you have to do the whole rom or just this process in particular?
Click to expand...
Click to collapse
read the post below that. please.
jonnyg1097 said:
Just a question but why are there some screens with "AM HUNG" as the name and not Samsung?
Click to expand...
Click to collapse
really? why? i need to explain?

OP link updated.
1 new bootlogo added, instructions updated, 2 pictures fixed

OP, you should add that these will not be compatible with CM7 (due to the proprietary fs used on param.lfs).

readme instructions updated. thank you
gotta love drop box!
im hosting the file and maintaining.

tuesday morning bump!!!!!

I
have adb installed and working for at least a year now. However, your program just tells me that adb is not recognized as a command. at the end it does say enjoy your new bootscreen and it gives me a screwed up bootscreen. Yes the file is only 96kb and yes I named it correctly. and yes I have usb debugging on and no the phone isn't mounted. I am using mosaic 1. Any ideas?

jhr5474 said:
have adb installed and working for at least a year now. However, your program just tells me that adb is not recognized as a command. at the end it does say enjoy your new bootscreen and it gives me a screwed up bootscreen. Yes the file is only 96kb and yes I named it correctly. and yes I have usb debugging on and no the phone isn't mounted. I am using mosaic 1. Any ideas?
Click to expand...
Click to collapse
Have you rebooted the PC? ADB is known to get stuck sometimes. Also retry the process but make sure to close all the adb.exe processes using task manager.

connexion2005 said:
Have you rebooted the PC? ADB is known to get stuck sometimes. Also retry the process but make sure to close all the adb.exe processes using task manager.
Click to expand...
Click to collapse
OK I restarted the comp and made sure their were no adb processes running and still your tool does not work it says killing all adb processes and then says adb is not recognized as an internal command. I know adb works because I used cmd:adb devices and it showed my phone. So what is the deal with this program? I am on 7 but I used run as administrator so it should work.

jhr5474 said:
OK I restarted the comp and made sure their were no adb processes running and still your tool does not work it says killing all adb processes and then says adb is not recognized as an internal command. I know adb works because I used cmd:adb devices and it showed my phone. So what is the deal with this program? I am on 7 but I used run as administrator so it should work.
Click to expand...
Click to collapse
It's got to be something with your instance. I use this all the time with Windows 7 x64...

VIDEO Tutorial on how to Root an Acer Iconia A500/501 from Stock 3.2

THANKS TO drkalo, sc2k and mrjay. Everything I know about rooting this tablet I learnt from your posts, all credit to you!!! THANK YOU!!!
I have made a video tutorial on how to Root and Install ClockWorkRecovery Mod on Acer Iconia A500/A501 running Stock Honeycomb 3.2/3.2.1
Please take a look at it if you are planning to do it.
Hope I helped someone
http://www.youtube.com/watch?v=zfSPP8UOn78
Have a nice day
Cursed4Eva

Thanks. I just got an Acer that was upgraded so this will be nice.
Sent from my newly unlocked Rezound

raider3bravo said:
Thanks. I just got an Acer that was upgraded so this will be nice.
Sent from my newly unlocked Rezound
Click to expand...
Click to collapse
Awesome test it out and let me know if you run into any issues
have a happy new year!

ashwin123 said:
Awesome test it out and let me know if you run into any issues
have a happy new year!
Click to expand...
Click to collapse
Thanks for the video of method 2 for downgrading for root access.
Just a note that I also wrote about here:
http://forum.xda-developers.com/showpost.php?p=20911517&postcount=38
Basically I had issues with recovery installing the unstable 3.0.1 with my Samsung 32gb Class 2 SD Card.
I found an old 2GB SD card and the recovery worked fine.
I've had rom issues with larger microSD cards on other devices, and I suspected correctly that going to a smaller card (<16GB) would allow the rom upgrade/downgrade to work properly.

durango99 said:
Thanks for the video of method 2 for downgrading for root access.
Just a note that I also wrote about here:
http://forum.xda-developers.com/showpost.php?p=20911517&postcount=38
Basically I had issues with recovery installing the unstable 3.0.1 with my Samsung 32gb Class 2 SD Card.
I found an old 2GB SD card and the recovery worked fine.
I've had rom issues with larger microSD cards on other devices, and I suspected correctly that going to a smaller card (<16GB) would allow the rom upgrade/downgrade to work properly.
Click to expand...
Click to collapse
Thanks for the info... I have updated my video description and added an annotation at the part where I talk about flashing to 3.0.1 (Have given you credit of cuz )
Thanks a lot again... wish you a happy new year buddy
Cursed4Eva

how to modify about tablet?
First off thanks you for the great video! I did this step by step and rooted my iconia a501 with no issues.
My question is how do i get the model number in about tablet information from acer iconia a500 to acer iconia a501? and under baseband it says unknown?
Any help would be much appreciated!

Hi! Thanks for tutorial, but I have a problem.
After installing update.zip from first link, I am constantly getting message "The process android.process.acore has stopped unexpectedly. Please try again." And, have to FC it...
What can I do to fix this? And to try whole root process from start.
Thanks in advance.

rafalc88 said:
First off thanks you for the great video! I did this step by step and rooted my iconia a501 with no issues.
My question is how do i get the model number in about tablet information from acer iconia a500 to acer iconia a501? and under baseband it says unknown?
Any help would be much appreciated!
Click to expand...
Click to collapse
it shouldnt cause any issues so leave it as it is, if you still really need that changed, repeat step 3 but a rom that is meant specifically for a501.
Have a great day bro

zozo10k said:
Hi! Thanks for tutorial, but I have a problem.
After installing update.zip from first link, I am constantly getting message "The process android.process.acore has stopped unexpectedly. Please try again." And, have to FC it...
What can I do to fix this? And to try whole root process from start.
Thanks in advance.
Click to expand...
Click to collapse
After the installing the first file, you will get force closes, that is par for the course... dont worry just continue with the steps and you will be good to go.
Cursed4Eva

ashwin123 said:
After the installing the first file, you will get force closes, that is par for the course... dont worry just continue with the steps and you will be good to go.
Cursed4Eva
Click to expand...
Click to collapse
Oh... thanks for info....
I completed the root, and have installed custom rom.
Once again, thanks for tutorial...

zozo10k said:
Oh... thanks for info....
I completed the root, and have installed custom rom.
Once again, thanks for tutorial...
Click to expand...
Click to collapse
You're welcome buddy! Glad to help

do all 3 files go to external sd card?

lsu205 said:
do all 3 files go to external sd card?
Click to expand...
Click to collapse
The first and the last will have to go to the external sd card the second can go anywhere

Hi there.
I am having some issues with getting the recovery to boot up the update.zip (link 1)
It loads and then the ! in the yellow triangle inside the android comes up.
I have tried both a 32gb (class 10) and a 8gb (class 2).. (I also just tried another 8gb class 2... nothing)
I am holding the vol down + power on just like in your video.
Can you lend any assistance?
Regards
(501, stock as, OTA 3.2)

b00f said:
Hi there.
I am having some issues with getting the recovery to boot up the update.zip (link 1)
It loads and then the ! in the yellow triangle inside the android comes up.
I have tried both a 32gb (class 10) and a 8gb (class 2).. (I also just tried another 8gb class 2... nothing)
I am holding the vol down + power on just like in your video.
Can you lend any assistance?
Regards
(501, stock as, OTA 3.2)
Click to expand...
Click to collapse
I am guessing that you renamed the file you downloaded to update.zip instead of unzipping it...
the link one file is a zip file and that will need to be unzipped again and you will get "update.zip"
Copy this to the external sd "mnt/external_sd/update.zip"
let me know if this helped
Cursed4Eva

ashwin123 said:
I am guessing that you renamed the file you downloaded to update.zip instead of unzipping it...
the link one file is a zip file and that will need to be unzipped again and you will get "update.zip"
Copy this to the external sd "mnt/external_sd/update.zip"
let me know if this helped
Cursed4Eva
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only issue is when i go to get Acer Recovery, from market, I cant type because of the FC's :\
Do you have an apk?
Edit: WOOOOT!
Thanks mate, everything is done.
Just doing a backup and gonna get installing a couple ROMS.
Damn the lack of 501 roms though

b00f said:
Only issue is when i go to get Acer Recovery, from market, I cant type because of the FC's :\
Do you have an apk?
Edit: WOOOOT!
Thanks mate, everything is done.
Just doing a backup and gonna get installing a couple ROMS.
Damn the lack of 501 roms though
Click to expand...
Click to collapse
Lol do you know how I answered your question? I made the same mistake while rooting my iconia, go back to the tutorial video and watch the step again, Id have cut the cam and come back... that was an hour I spent trying to figure out what I messed up
Gluck with the Iconia
Cursed4Eva

isn't it power and VOLUME - ? ON MY GTABLET IT'S VOLUME+.

lsu205 said:
isn't it power and VOLUME - ? ON MY GTABLET IT'S VOLUME+.
Click to expand...
Click to collapse
It is power and volume -

[TOOL][LINUX]COPERFIELD ROM MAKER create system.img for some devices

[TOOL][LINUX] COPERFIELD ROM MAKER v.0.0.2
DOWNLOAD TOOL
Suport:
Samsung Galaxy S
Samsung Galaxy Tab 7.0
Samsung Galaxy SII I9100
Samsung Galaxy SIII I9300
Samsung Galaxy NoteI N7000
Samsung Galaxy Tab 7.7 P6800
Google Nexus 7
1. Required LINUX and Root access on the device ...
2. Enable debug mode on the device and connect the USB to the PC.
3. Extract the file from the archive with the tool to check just in case the right of scripts and binaries folder /tools - all must be executed ...
4. From the root folder of the tool to run in a terminal script menu:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Configure the tool to claim 1 (necessary only once after the start of the tool):
6. Select the appropriate device, the program will create the device image of the system partition, download to PC and convert it to an image suitable for flashing Odin and put it in the out.
7. Select the package in the image archive .tar.md5 for flashing via Odin or fast boot (if necessary, may be placed in a folder out the rest of the ROM - the tool will pack them with the system image), enter the name new firmware and press Enter, the tool will create the firmware and display a report:
8. May be further packed in zip with maximum compression, to achieve the smallest size ...
9. The ability to create cache.img
10. Cache.img empty images in the folder empty (before flashing renamed cache.img)

the s2 and s3 system.img will be ext4 format ?

globula_neagra said:
the s2 and s3 system.img will be ext4 format ?
Click to expand...
Click to collapse
Of cause, kernels don't support different file systems...

Lol...I just started making script...here.But you finished it here perfectly with many devices supported .Good to see it.Let me see If I can anything better
---------- Post added at 10:13 AM ---------- Previous post was at 09:15 AM ----------
Just a little idea for you...If you make an empty data partition too,You can make sure that the rom does a factory reset while its been flashing

vijai2011 said:
Lol...I just started making script...here.But you finished it here perfectly with many devices supported .Good to see it.Let me see If I can anything better
Click to expand...
Click to collapse
Yes, I do not mind
Just a little idea for you...If you make an empty data partition too,You can make sure that the rom does a factory reset while its been flashing
Click to expand...
Click to collapse
I do not quite understand what you mean, but in order to reset a user's data is sufficient to add to the cache.img command wipe data...

as i9000 said:
Yes, I do not mind
I do not quite understand what you mean, but in order to reset a user's data is sufficient to add to the cache.img command wipe data...
Click to expand...
Click to collapse
I will pm you shortly with what I meant along with commands for you to understand it better
Sent from my GT-N7000 using xda app-developers app

Please can you help a noob - ROM seems extremely small
Hi I have been hunting for a tool to do a "complete" backup of my S3 so I can restore it in one go after playing with other ROMS and get back to Stock easily. So seeing this looked fantastic. I have run steps 1 , 4 and 10 .
The ROM i get is only 27,161 KB , and as the stock rom I flashed was over 1 gb I wonder if I have done something wrong and I am afraid to try flashing this with Odin . Especially when I did a NANDROID Backup from S3 Toolkit and this is 1.6gb .
Any advice would be well received .

plug_it_in said:
Hi I have been hunting for a tool to do a "complete" backup of my S3 so I can restore it in one go after playing with other ROMS and get back to Stock easily. So seeing this looked fantastic. I have run steps 1 , 4 and 10 .
The ROM i get is only 27,161 KB , and as the stock rom I flashed was over 1 gb I wonder if I have done something wrong and I am afraid to try flashing this with Odin . Especially when I did a NANDROID Backup from S3 Toolkit and this is 1.6gb .
Any advice would be well received .
Click to expand...
Click to collapse
You forgot step 5! configure tool, compile and install zlib and compile ext4_utils, and got empty image system.img...

is there a chance of a port to cygwin?

I like how the title says it supports any device and then the first post says it supports less than 10 devices.

Creating .tar.md5 will create images that increase binary counter ?
Edit:
Only with custom recovery

gianptune said:
I like how the title says it supports any device and then the first post says it supports less than 10 devices.
Click to expand...
Click to collapse
Sorry, it all my bad english, of cose isn't any but some...
I did chang it...

Is there any apps like this for W8??
Sent from my E16i using xda premium

Hi and thx for a great tool
1. Any chance when I run 6. that it stops when it is mounted and I can edit/add content in the output.img before it creates a system.img?
Would be nice to be able to edit before system.img
2. Possible to edit a factory system.img that I have on pc?
Thx for your time

[Q] CX919 II Firmware

Hey guys,
Hopefully someone can help me...
Background: I bought this CX919 II, setup the device so that it displays in 1080p, install XBMC, and it only shows 720p. Do a bit of reading and find out that it's probably upscaling and there's a separate 1080p firmware, so of I go...
Problem: So I flash the stick with the steps below, everything seems to go okay, except when I plug the stick back into the tv, nothing happens... How do I get my device back?
1 ) Download Rockchip Batch Tool and extract
2 ) Put the USB cable into theOTG port of the CX919 II, hold the reset button and plug it into the pc.
3 ) Windows looks for driver, I send it to the correct location, it finds the drivers, no problem
4) Add SUPPORTLOWUSB=TRUE and FULLSPEEDUSB=TRUE to the config.ini file (otherwise it doesn't detect the device)
5 ) Start Rockchip Batch Tool v1.7. It finds the device and shows a green box
6) I select the 1080p firmware (which I got here)
7) Click on the restore button and wait patiently for the success message
8) Success message is displayed.
9) Unplug device, plug device into tv
10) Device has power, but tv tells me that there is no device connected.
So, where did I go wrong? And how can I fix the device?
I did manage to get some sign of life by using this firmware (I assume that this is the manufaturer), except all I see with this are just four flashing penguins in the top left corner.
Before it died, this is what the software info looked like..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g

Same problem
TheAlteredState said:
FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g
Click to expand...
Click to collapse
Hi
I've got the exact same issue as you. After trying to root my CX919 CYX_809III V5_2 I ended up with no HDMI signal :crying:
After downloading (so fare) 10 different firmware, I've only got one of them to show 4 flashing penguins in the top left corner.
Hopefully your linked firmware in post #2 will work. Had difficulty getting the download page loaded, but it seems like I'm able to download now through South Korean VPN.
I guess the file contains only one .img file to be flashed as system file in Rom Flash Tool.
Do you mind telling me what ROM you used to get correct Loader, parameter, misc, kernel, boot and recovery files.
Regards mjolne

mjolne said:
Hi
I've got the exact same issue as you. After trying to root my CX919 CYX_809III V5_2 I ended up with no HDMI signal :crying:
After downloading (so fare) 10 different firmware, I've only got one of them to show 4 flashing penguins in the top left corner.
Hopefully your linked firmware in post #2 will work. Had difficulty getting the download page loaded, but it seems like I'm able to download now through South Korean VPN.
I guess the file contains only one .img file to be flashed as system file in Rom Flash Tool.
Do you mind telling me what ROM you used to get correct Loader, parameter, misc, kernel, boot and recovery files.
Regards mjolne
Click to expand...
Click to collapse
If you have any problems, let me know. I'll share it with you via simpler methods.
I didn't use anything special, just used batch tool (which I think is included in the zip) to flash the firmware file, and everything worked.

Stick working again
TheAlteredState said:
If you have any problems, let me know. I'll share it with you via simpler methods.
I didn't use anything special, just used batch tool (which I think is included in the zip) to flash the firmware file, and everything worked.
Click to expand...
Click to collapse
Successfully restored back to stock firmware.
Everything went like clockwork :victory:
Now the hunt for root access starts again...

TheAlteredState said:
FYI, here's the firmware that worked for me, if anyone else is interested:
cyxtech_rk31_809iii_8723bs_141216_4.4_8g1g
Click to expand...
Click to collapse
can u tell me what rom is it?it 4.4 android and it support 1080
can u send me the download link ,i cant download from the link u share

zdns said:
can u tell me what rom is it?it 4.4 android and it support 1080
can u send me the download link ,i cant download from the link u share
Click to expand...
Click to collapse
It's the factory image. It is 4.4 and 1080p.
Try this link.

TheAlteredState said:
It's the factory image. It is 4.4 and 1080p.
Try this link.
Click to expand...
Click to collapse
thanks for your help
i have this mini pc, u think the rom it work good for my device?

zdns said:
thanks for your help
i have this mini pc, u think the rom it work good for my device?
Click to expand...
Click to collapse
I have the same one.
Seems to work okay as far as I've seen. Haven't had any problems, although I haven't found many ROM's that actually work for me to compare it to

TheAlteredState said:
I have the same one.
Seems to work okay as far as I've seen. Haven't had any problems, although I haven't found many ROM's that actually work for me to compare it to
Click to expand...
Click to collapse
thanks for your help i try it
how can i install it? which program tool u use?
because i try to install it and when i connect it to tv nothing happen
can u help me plz?

Batch tool, it should be inside the zip...

i try but nothing happen can someone plz help me?
i try to install it with the batch tools but when i pukg it to tv it;s no signal

Can you open it and take pics of the inside? Mine is V5.2, maybe your's is something else...

1080P Firmware
I managed to activate real 1080p on this model: CYX_809III V5_2 20141105 RTL8723BS. Please see:
http://forum.xda-developers.com/android/development/guide-real-1080p-cyx809iii-v52-20141105-t3109734

IMEI Null, Baseband/Modem unknown, missing files

Hello guys.
I am really tired of looking for a fix for my problem. I am asking for help rarely and today is that day that I need your fast help with fixing my phone.
So...
I wanted to create a backup of 2 partitions - modemst1 and modemst2.
I have used the command "reboot nvbackup" - phone restarted, but no files created in backup and restarted already without IMEI code, and then I realized that phone is not recognizing SIM card.
First thing I have thought of - okay, lets reflash this thing. That's what I did, never with a success. I have tried flashing the original Samsung software into my phone, no help.
Tried to enter to service mode to fix it - nope - just blank window with rows, probably because SIM is not recognized.
Full wipe? Didn't help. Busybox and GSII_Repair neither.
Then by browsing root stuff I found out that I am missing 2 files:
- /dev/block/mmcblk0p10
- /dev/block/mmcblk0p11
I think that might be a problem which needs to be fixed. (I have tried to backup those two files, with no success, and as it seems, I have probably deleted the accidentally)
I was thinking if someone can back those blocks up and send the images to me so I can somehow recover those two files (Lollipop)
I have no backup of EFS folder.
I have tried to flash the modem.bin from stock firmware, no luck, no fix.
So I am looking for help from you guys, you are my last hope to get that thing fixed.
Problems to fix:
No SIM detected
No GSM signal
Unknown Modem version
Null IMEI
Missing files in /dev/block folder
EDIT: I promise that I will create a guide if I will fix it. But I need to fix it by tomorrow.

It will be nice if somebody can make an image of working EFS partition of his/her Note 3 and send it to me. After that I will check out if it works.

Almost 100 views, and still no answer? Is it that bad?

You need download file PIT and flash fw
JustCinek1 said:
Hello guys.
I am really tired of looking for a fix for my problem. I am asking for help rarely and today is that day that I need your fast help with fixing my phone.
So...
I wanted to create a backup of 2 partitions - modemst1 and modemst2.
I have used the command "reboot nvbackup" - phone restarted, but no files created in backup and restarted already without IMEI code, and then I realized that phone is not recognizing SIM card.
First thing I have thought of - okay, lets reflash this thing. That's what I did, never with a success. I have tried flashing the original Samsung software into my phone, no help.
Tried to enter to service mode to fix it - nope - just blank window with rows, probably because SIM is not recognized.
Full wipe? Didn't help. Busybox and GSII_Repair neither.
Then by browsing root stuff I found out that I am missing 2 files:
- /dev/block/mmcblk0p10
- /dev/block/mmcblk0p11
I think that might be a problem which needs to be fixed. (I have tried to backup those two files, with no success, and as it seems, I have probably deleted the accidentally)
I was thinking if someone can back those blocks up and send the images to me so I can somehow recover those two files (Lollipop)
I have no backup of EFS folder.
I have tried to flash the modem.bin from stock firmware, no luck, no fix.
So I am looking for help from you guys, you are my last hope to get that thing fixed.
Problems to fix:
No SIM detected
No GSM signal
Unknown Modem version
Null IMEI
Missing files in /dev/block folder
EDIT: I promise that I will create a guide if I will fix it. But I need to fix it by tomorrow.
Click to expand...
Click to collapse
one more solution.
You need download firmware have 5 files. inside have file .pit and flash it using Odin. Step-by-step flash it. this is wrong/error partition EFS. or you need download file .pit for your device exp: .pit N9005 using only for N9005, you choose PIT location on odin. Remember you need tick to Re-Patition.
Good Luck!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Your stuff didn't help me at all, sorry. It was the same after these things which You told me. But I have fixed it and you can mark this thread as solved. I am currently writing a guide what to do to fix that stuff.