Database Users

[Q] roaming not working

Hello everyone, I'm a Verizon user coming from an xperia z3v. I've had the moto x for a day now and was very pleased with the phone. Now I'm having problems and about to return to best buy. The phone worked on 3g for an hour then stopped and wouldn't pick up LTE like my z3v. I brought it to work and it connected to LTE and won't connect to 3g or the 1x. Thus data works but I cannot make calls or text. My Sim is active and has been used for a year. All apn settings and roaming settings are correct.
Basically could it be that I'm starting the phone in a roaming area make it not work? Or is there any way without rooting to make the phone force 1x?
At this point I'm super annoyed and have tried every factory reset possible and it still will not work. Any suggestions?

krenogin said:
Hello everyone, I'm a Verizon user coming from an xperia z3v. I've had the moto x for a day now and was very pleased with the phone. Now I'm having problems and about to return to best buy. The phone worked on 3g for an hour then stopped and wouldn't pick up LTE like my z3v. I brought it to work and it connected to LTE and won't connect to 3g or the 1x. Thus data works but I cannot make calls or text. My Sim is active and has been used for a year. All apn settings and roaming settings are correct.
Basically could it be that I'm starting the phone in a roaming area make it not work? Or is there any way without rooting to make the phone force 1x?
At this point I'm super annoyed and have tried every factory reset possible and it still will not work. Any suggestions?
Click to expand...
Click to collapse
Have you tried hidden menu. *#*#4636#*#* in dialer then phone info tab.

Yes I have. I played around with every setting and tried to use just CDMA and it would not register at all and would go to LTE only.

[Q] Stuck on "EDGE". How can I change the Network under "SIM Status" ?

[Q] Stuck on "EDGE". How can I change the Network under "SIM Status" ?
I'm running Dirty Unicorns 9.8 OFFICIAL (5.1.1) on my Nexus 4. The other day I noticed I had like one or two bars so went into Settings > About phone > Status > SIM Status and clicked "Network". Usually, there are a handful of providers to use there and sometimes changing to a different one improves my reception (This is a T-Mobile phone). I don't remember what I left it on.
Today the phone is stuck on "EDGE" under "Cellular Network Type". I tried to get back in the "Network" to check and see if I left it on something stupid, but I can't get back into the provider selection. No matter what I do, the device won't hook up to "LTE" (whatever HSPA/HSPA+ thing T-mo says is LTE). Everything worked fine last week. Haven't applied any patches or anything other than messing around with the Network settings. Any idea what I might try? Is there a magic dialpad entry to use to reset the Network?
Thanks

eris170 said:
I'm running Dirty Unicorns 9.8 OFFICIAL (5.1.1) on my Nexus 4. The other day I noticed I had like one or two bars so went into Settings > About phone > Status > SIM Status and clicked "Network". Usually, there are a handful of providers to use there and sometimes changing to a different one improves my reception (This is a T-Mobile phone). I don't remember what I left it on.
Today the phone is stuck on "EDGE" under "Cellular Network Type". I tried to get back in the "Network" to check and see if I left it on something stupid, but I can't get back into the provider selection. No matter what I do, the device won't hook up to "LTE" (whatever HSPA/HSPA+ thing T-mo says is LTE). Everything worked fine last week. Haven't applied any patches or anything other than messing around with the Network settings. Any idea what I might try? Is there a magic dialpad entry to use to reset the Network?
Thanks
Click to expand...
Click to collapse
Same problem here with metro pcs who uses T-mobile

After a few days of this, and several chats and calls to T-Mobile, it seems T-Mobile is "working on towers" in my area and things will be like this for a few days. The situation is this according to the last phone call with T-mobile:
* HSPA+ is no longer available on the towers in my area
* LTE and GSM (Edge) are the only supported modes
* LTE is not supported on the Nexus 4. tuff-shizz. buy a new phone.
Ok well this sucks... so here's what I did in the past couple days.
* Installed Chroma ROM and the the LTEEnable zip file thing floating around all the forums here.
* Found out Chroma was a rebranded AOSP ripoff so uninstalled it.
* flashed Dirty Unicorns 6.0.1 to my Nexus 4, bluetooth seemed funky so flashed the .33 radio from "dmitry" ROM that I found on several threads. Also flashed LTEEnable zip, not sure I needed it. LTE now working.
* dialed *#*#4636#*#* and went into "Phone Info"
* Network Type: "LTE"
* Set Preferred Network Type: LTE/GSM (PRL) -- originally had this set to "LTE only" but no voice calls could go out, or come in.
You would think this is the end of story, but wait. Voice calling takes 20 seconds to connect (even voice mail). With "LTE only" settings all incoming calls go directly to voice mail. never even rings the phone. Are you shizzing me?? With "LTE/GSM (PRL)" the phone waits for 20 seconds to drop from LTE back to "Edge" before the call finally hooks up.
Today, found out nexus 4 doesn't do VOLTE (Voice Over LTE). at least thats what google said. That would explain the Drop to "Edge" when dialing out.
Thing is, I tried this with a NEXUS 5 on my account, using two different sims , running stock Android Whatever on the N5 and it does the EXACT SAME THING. dropping calls to "Edge" before connecting. Takes 20 seconds to dial out. Incoming calls on LTE (which the n5 runs by default) all go to voicemail.
So it seems the workaround now is to dial the "magic number" above and set the "Preferred Network" to "GSM only" (Edge). That's the only way to get phone calls in or out of either device on T-Mobile's network today. Don't bother trying to Google anything though because it won't re-connect to LTE to do it. On either my hacked N4 or the stock ROM N5. You may as well be using a dial-up modem to get any data through either phone.
So, in the end, I don't have anything screwed up under "Network Settings". I'm stuck in "Edge" mode because Tmo is updating towers for LTE. It remains to be seen if I have to upgrade both and N4 and N5 to stay on T-Mobile however. The next few days will tell. I still think this is a bit of a ****-move on T-Mobile's part. Especially if I have to upgrade the N5. It's an expense I wasn't planning on. They could at least kick in some rebate to help out with the cost of new devices. No idea if it would save any money to switch carriers at this point.

Signal issues when using on GSM Network

I switched my parents over to Cricket from Verizon today. They both have S5's. I set the network mode to lte/wdcma/gsm but it keeps going from Edge, HSPA, and emergency calls only. So I thought I'd try setting it to WCDMA only well I can't as *#*#4636#*#* does NOT work.
While my LG G2 on cricket and my iPhone 7 on AT&T sit and hold both a steady HSPA or LTE perfectly fine without issue which is the reason I switched them.
Any suggestions? Would setting to global be better? I would assume it would make matters worse.
Both phones are running MM and I haven't really kept up with roms/root/etc for Samsung stuff.
Thanks

935p unlocked and flashed to 935u but can't pick up cdma bands

So maybe this was a bad idea but I'm on boom mobile (verizon mvno) and thought I could save some money and picked up a sprint s7 edge on sale, I just had it unlocked and they flashed it to the 935u unlocked version. The problem is I can't connect to the verizon network, after playing around with it a bit I got it to connect to the verizon lte network but still no voice. In my meager attempts to troubleshoot I noticed I have the options under network mode of
LTE/3g/2g -->> this picks up all networks in my area (Verizon, Sprint, ATT, Tmobile, US Cellular)
3g/2g --> only shows ATT and Tmobile
3g --> only shows ATT and Tmobile
2g --> only Tmobile
So I'm thinking my phone isn't setup right to connect to cdma networks which I thought the 935u rom was supposed to do. Anyone have any tips on how i can further troubleshoot this?
Thanks in advance.
edit: Well I installed a program called 4g LTE switch and set it to cdma only and I was able to make a phone call (3g data also worked) like that but changing it to LTE/cdma wouldn't let me make a call but LTE data worked, if i leave it set to LTE/cdma and reboot it switches back to LTE only.
edit2: Maybe it's trying to connect to volte which isn't offered for Verizon MVNO's yet but i don't see any settings available to disable that.
edit3: When set to LTE/CDMA I could sometimes make outgoing calls, sometimes I would get the double dial prompt, it was very slow to switch between LTE and CDMA so I would miss incoming phone calls.
I threw in the towel and just flashed the latest Verizon rom and it's working properly.

Galaxy s10+ Sprint Unlocked issues on other network.

Let me start by saying that this phone works great. I had it unlocked and practically all is well. There is one issue i am having.
The phone will not automatically reconnect to LTE. My carrier does not support voLTE so it switches to 3g for calls. After a call, the phone stays on 3g and I have to manually toggle the 3G and LTE under network settings to get it to go back to LTE. My carrier uses Bands 12 and 17 and both of these bands have strong signal on the phone when connected to LTE.
I also installed the stock U1 firmware on the mobile to remove all the sprint bloat. Now this issue is the only peeve. I did factory reset it and I also reinstalled the firmware a second time to no avail. The phone did the carrier provisioning on initial start-up after sim was inserted. So I am at a loss.
I had an At&t s10+ which I sold and never had these issues and i did the very same to it as well. I was going to by the OnePlus 7 Pro but i loved the s10+ so i had to go back. It is not such a big deal because i don't make that many calls or receive so many but it is bit annoying. Any solutions?