Database Users

stuck at huawei logo.

i followed this stepto port miui v4 to u8800
http://forum.xda-developers.com/showthread.php?t=1499411
and i used miui v4 from desire z and cm9 from u8800 but when i put all together i can install it from recovery without errors but when phone boots up stuck at huawei logo.
other roms(aurora,miui,...) works good so i think you might know where i failed?
cause i dont know.

There is a forum for flashing the stock GB.
I think that will work.
Sent from my U8800 using xda premium

thanks but we dont mean the same thing.i fixed it.

mihec161 said:
thanks but we dont mean the same thing.i fixed it.
Click to expand...
Click to collapse
have you fixed it? You ported MIUI ICS to U8800? If yes, you're my hero

Question...

Hello i'm new on this forum and i hoppe that it can help me "starting" on Android world
But i've comed here with a question...I've been reading a few things and i'm woundering if i can Update/Upgrade my Kernel... i'm now using this Rom ->[ROM][Gingerbread] 2.3.7 | CyanogenMod 7 | SwiftDroid ASIS| Mur4iK... can i update this Kernel? can it be done? should i do it?
i hope you can help me!
thanks

carequinhasebas said:
Hello i'm new on this forum and i hoppe that it can help me "starting" on Android world
But i've comed here with a question...I've been reading a few things and i'm woundering if i can Update/Upgrade my Kernel... i'm now using this Rom ->[ROM][Gingerbread] 2.3.7 | CyanogenMod 7 | SwiftDroid ASIS| Mur4iK... can i update this Kernel? can it be done? should i do it?
i hope you can help me!
thanks
Click to expand...
Click to collapse
flashing new ROM comes with a new kernel

if you want you can flash SDSL v2.0 it's much better then your current rom.. http://forum.xda-developers.com/showthread.php?t=1364416

Well i'm aware that by flashing a new rom a new kernel is installed. What i'm asking is if its possible to install a new kernel on my rom.
Thanks
Sent from my GT540 using Tapatalk 2

of course, you can install only the kernel from SDSL but you can run into many problems like non-working things (e.g camera, wi-fi etc). you must download the update.zip of SDSL and unpack it. within there you can find a boot.img.
flash it like this:
fastboot flash boot boot.img
Click to expand...
Click to collapse
but do a nandroid before !
but like the others recommended: Use the new version, or a different ROM (tejasdj12's builds, wingrime's Openswift ROM )

Hm ok thnks for the advice. Now i have to ask, what rom you think is best to me? I like roms 2.3.x... wich you think is best and more stable?
Thanks
Sent from my GT540 using Tapatalk 2

carequinhasebas said:
Hm ok thnks for the advice. Now i have to ask, what rom you think is best to me? I like roms 2.3.x... wich you think is best and more stable?
Thanks
Sent from my GT540 using Tapatalk 2
Click to expand...
Click to collapse
I'm on tejas' ROM and I love it
http://forum.xda-developers.com/showthread.php?t=1550469
Sent from my LG GT540 using xda premium

weird Orange colours

Help.
Why the colours are oranges also cyanogen boot animation is orange when I tried use Devswift kernel on miroslav Ics??
I think that some with color banding bug or the kernel doesnt work properly because it optimized for aokp?
I add attachment to this post.

Niquel97 said:
Help.
Why the colours are oranges also cyanogen boot animation is orange when I tried use Devswift kernel on miroslav Ics??
I think that some with color banding bug or the kernel doesnt work properly because it optimized for aokp?
I add attachment to this post.
Click to expand...
Click to collapse
Does this happen on other roms?
Sent from my Sony Tablet S using xda premium

andyabc said:
Does this happen on other roms?
Sent from my Sony Tablet S using xda premium
Click to expand...
Click to collapse
No only if try use Devswift kernel on miros roms.
I wanna try that because Devswift kernel is stable and mrios kernel causes random reboots.

Did you port modules from DevSwift kernel ?

smileydr0id said:
Did you port modules from DevSwift kernel ?
Click to expand...
Click to collapse
No gonna try now thanks .

smileydr0id said:
Did you port modules from DevSwift kernel ?
Click to expand...
Click to collapse
Sorry I'm not sure how to do that.
Could you please tell me.

Niquel97 said:
Sorry I'm not sure how to do that.
Could you please tell me.
Click to expand...
Click to collapse
port boot.img from devswift to miro
then port /lib/modules/and all files from devswift folder into miro rom
the port /bin/wpa_suplicant from devswift to miros rom

smileydr0id said:
port boot.img from devswift to miro
then port /lib/modules/and all files from devswift folder into miro rom
the port /bin/wpa_suplicant from devswift to miros rom
Click to expand...
Click to collapse
First I port modules from Devswift rom to miros rom and try still weird colours.
Then I port other files too and now I'm stuck at bootloop.
So which files I exactly nees port?

Niquel97 said:
First I port modules from Devswift rom to miros rom and try still weird colours.
Then I port other files too and now I'm stuck at bootloop.
So which files I exactly nees port?
Click to expand...
Click to collapse
I will do it for you and upload later tell me what roms do you want ?

smileydr0id said:
I will do it for you and upload later tell me what roms do you want ?
Click to expand...
Click to collapse
Miros cyanogen 9 ics with 2.6.35.11+ kernel from Devswift AOKP.
If you could, it would be awesome ics rom.

smileydr0id said:
I will do it for you and upload later tell me what roms do you want ?
Click to expand...
Click to collapse
Your really good at this
Cid is looking awesome in the boot animation
Sent from my Sony Tablet S using xda premium

[Q] Sense UI port on S5360

Is possible to port Sense UI from device like Wildfire to Galaxy y s5360?

lzimbrea said:
Is possible to port Sense UI from device like Wildfire to Galaxy y s5360?
Click to expand...
Click to collapse
Is it possible - YES !
ps - don't ask me how :silly:

can somebody help me with some basic knowledge on port rom?

lzimbrea said:
can somebody help me with some basic knowledge on port rom?
Click to expand...
Click to collapse
Thats impossible.. because that would require a new guide to be written on it.. no one can write that in a post..
just search or visit xda university to learn about it..

Porting Sense UI
lzimbrea said:
can somebody help me with some basic knowledge on port rom?
Click to expand...
Click to collapse
Here's how to port Sense 3.5 :-
The Guide
Take CM7 Madteam Edition as your base
Take HTC Explorer (Pico) deodexed rom as your ported rom. (Search it.)
Follow the instructions from the guide.
Compile/Modify a kernel to make it compatible with both CM7 and the ported Sense UI. (Don't ask me how ? , Google it).
Boom you're done

Thx Gamer R:good:

Hey lzimbrea,
You gotta make changes in the Ramdisk, if you are modifying any CM7 compatible kernel.
That's quite a tedious job. I think Merruk's Kernel will be better to modify. Please do ask Maroc-OS first.
Or
Try porting the ROM and run it with an UNMODIFIED kernel first.

Tried months ago kernel problem

First atempt
CWM show me error 4....
i google it but no results.
think is build.prop.
sense is more complicate to port
:fingers-crossed:

lzimbrea said:
CWM show me error 4....
i google it but no results.
think is build.prop.
sense is more complicate to port
:fingers-crossed:
Click to expand...
Click to collapse
Seems like a kernel problem.
Extract the kernel, which you're using.
Edit the init.rc in the Ramdisk and compile it.
You could tally your init.rc from this port(Sense 2.1 - Galaxy Mini).
Atleast, it'll boot

first boot
today my phone boot !!!
but............
:crying:
touch wizz still present..
and a lot of htc app crashed !
how to fix it?

I don't get it. You did port using CM7 as base. SO HOW COME YOU STILL HAVE TOUCHWIZ ?

Gamer R said:
I don't get it. You did port using CM7 as base. SO HOW COME YOU STILL HAVE TOUCHWIZ ?
Click to expand...
Click to collapse
No, i use as base stock s5360 rom.
touch wizz remains from previously installed software.
i use even CM7 as base but the same result....
the installation process is to quick....
maybe the problem is in update_script

[Q] How to downgrade Lg gt540 from 4.0.4 to 2.3.6

Hello friends,
I am using IceCream Swift on my lg Gt540. I wanna down grade it to 2.3.6 or lower. Coz this 4.0.4 cyanogen mod 9 version is very slow , and hanging up the phone.. Phone is also working and responding very slow. So Please help me how to get back to 2.3.6. please check the images to know complete details about my phone..

I would suggest using miro's AOSP or SDSL or leoposas Zoe rom if u don't mind 2.3.7. There are both recovery and fastboot versions so use the method you feel comfortable with. Flash them the same way you did 4.0.4
Sent from my GT540 using xda app-developers app

Can u tell me how to do it that process
Desden said:
I would suggest using miro's AOSP or SDSL or leoposas Zoe rom if u don't mind 2.3.7. There are both recovery and fastboot versions so use the method you feel comfortable with. Flash them the same way you did 4.0.4
Sent from my GT540 using xda app-developers app
Click to expand...
Click to collapse
Can u tell me how to do that.. I dnt have ant files to do that. I don't have any backups also.

I found the solution
azeezahmads said:
Can u tell me how to do that.. I dnt have ant files to do that. I don't have any backups also.
Click to expand...
Click to collapse
I found the solution.... Thanx for the reply bro... I installed Zoe Rom. Its damn god.. working very fast.:laugh::laugh::laugh:

simply dowload zoe rom and install through CMW