Related
Hello,
I have a problem with my G1.
I got my G1 maybe a month ago. It had firmware 1.1 and radio module 1.22.12.29. Back then I did not realize it was a radio image compatible with firmware 1.0 as far as I gather from the HTC website.
At first, I did not intend to root it at all, a decision later I would regret. Well, it worked OK, only it was not updated. I was told I would receive the update over-the-air in 4 days. At first they said it would be to 1.5, but it turned out my operator started to upgrade straight to 1.6.
And so I did receive it in 4 days and the problems began.
Basically, the voice quality is so bad that half of what I say is ununderstandable. My voice sounds metalic and I cannot have a coherent conversation over the phone. It is a business phone, so you can imagine it is rather annoying when I have to struggle to be understood by clients.
Ok, so I checked the bootloader for the radio image version and I found out it was still version 1.22.12.29. As per the HTC website I should have 2.22.19.26I. So, obviously the radio firmware was not updated as it should be as per the HTC website. Thus, it seems the reason voice quality is so poor is the outdated radio firmware.
Since I did not plan to return my new phone to my operator (I had no time for it), I decided to root the phone and update the radio firmware myself. It seemed simple enough and I use Unix and Linux since 15 years, so it seemed it would pose no problem.
Quickly I learned that rooting 1.6 is not so simple. One-click method fails. Only goldcard worked and after a few days of struggle I finally got back to firmware RC7 and rooted the device.
Right after I updated the recovery image to CM 1.4, but before I flashed the CM ROM I attempted to update the radio firmware as was suggested by one tutorial I followed as well as the CM website.
Well, it all went smooth. After the update I pressed Home and Back, it rebooted, back to recovery CM1.4, one more time Home and Back and I was back to the working phone. I checked the radio firmware and lo and behold, it was still version 1.22.12.29. No errors, nothing, smooth update process and no result. I repeated it at least 5 times to no avail.
I decided to install CM 4.2.7.1 ROM and try to update the radio then. Before the CM ROM I updated the SPL to HardSPL with success to have fastboot and went to install CM. It went smooth and I booted into this new rooted G1 ROM with ease.
Again, I attempted to update the radio firmware from recovery CM1.4 and again no results.
So, I am back to square one. I have again firmware 1.6 only from CM instead of stock HTC, and I cannot use this phone for calling.
So, summarizing, I got the phone with firmware 1.1, but radio firmware from 1.0. Why it was not updated together with the system I do not know. Then I got an update to 1.6 and the radio firmware also did not upgrade. Then I went back to RC7 (firmware 1.0), rooted the phone, attempted the radio firmware update before installing CM ROM and failed. And finally, I installed HardSPL + HTC 1.6 recovery (as suggested on the CM website) + CM ROM and again failed to update the radio firmware to 2.22.19.26I. The update process is going without any errors. Verification, extracting, installation of radio image all go OK, the phone reboots but no radio updated.
Anybody any idea why it is like this? Why this phone refuses to update the radio from HTC website.
Any suggestions?
Oliwer
PS. One more thing, I was contemplating updating the radio via fastboot, but it seems after reading HTC website that fastboot is only for system and recovery image flashing. The radio has to go first adn from recovery console. Am I right on this?
I too have a problem updating to the 26i version. however i rooted at 1.5 using the one click root method and ive since switched from cyan 1.4 recovery and cyan roms to amon recovery and dwang roms. No matter which recovery i use, the 26 update flashes without an error but shows up as the same radio ive had all along (1.22.14.11) i made a thread about it but noone seems to have an answer. Sorry I couldnt help, but at least bumped up your thread and maybe someone can help us.
speedysilwady said:
I too have a problem updating to the 26i version. however i rooted at 1.5 using the one click root method and ive since switched from cyan 1.4 recovery and cyan roms to amon recovery and dwang roms. No matter which recovery i use, the 26 update flashes without an error but shows up as the same radio ive had all along (1.22.14.11) i made a thread about it but noone seems to have an answer. Sorry I couldnt help, but at least bumped up your thread and maybe someone can help us.
Click to expand...
Click to collapse
Thanks for sharing!
At least I know I am not alone here with this problem.
Since it's Christmas and I have some more time, I decided to do a Nandroid backup and wipe my phone back to the original rom with 1.0 firmware (RC7).
I used my goldcard and I flashed it in a few minutes. I logged back into 1.0 firmware with the original bootloader and recovery console.
Next I put everything on my goldcard, flashed the recovery CM1.4 from the terminal, went to the bootloader, flashed update.zip with the newest radio 2.x from HTC, everything went smooth. Reboot and again NO change of the firmware. Tried a few more times flash the radio and HardSPL together to no avail. I restored my backup and found myself back to square one.
One think I noticed, and I wonder if you get the same, is that when I flash the radio, the phone reboots back to the recovery console and shows "Formating Cache..." message. It does not tell me anything like Please reboot, just this message. Meanwhile I can move the cursor up and down the recovery menu, so the phone has not hang up. It just sits at the recovery until I reboot it. Once I waited 30 minutes to see if it reboots itself and it does not. So, I press Home+Back and then it reboots fully and after loging in I check the radio and NO change.
So, I wonder if your phone does the same?
Oliwer
PS.
T-Mobile G1 - w/ ROOT
DREA110 PVT 32B
HardSPL 10.95.3000
Recovery image: HTC Android 1.6 (from HTC website)
Class IV 8GB SD Card w/ Ext 4 Partition and Swap partition
That's a huge wall of text, and it's Christmas so I'm a little merry
When flashing the radio image w/ Cy's recovery you must flash as an update.zip using alt-s, press whatever key you need to press to confirm and reboot using home+back. If you use flash any zip or use the trackball to reboot the radio image (or SPL) will not reboot in the required way to complete installation.
AdrianK said:
When flashing the radio image w/ Cy's recovery you must flash as an update.zip using alt-s, press whatever key you need to press to confirm and reboot using home+back. If you use flash any zip or use the trackball to reboot the radio image (or SPL) will not reboot in the required way to complete installation.
Click to expand...
Click to collapse
I tried all possible ways. Just a few minutes ago I went to CM1.4 recovery, used the update from update.zip, pressed Home+Back, rebooted back to recovery console, pressed Home+Back again, booted to CM4.2.10, punched the PIN code, checked the About Phone section and I am still with 1.22.x radio firmware.
This phone simply refuses to update the firmware in any known way.
So, my plan now is to un-root it back to the state I got it 2 months ago and return it to the operator and request upgrade of radio, since Donut with an old radio is basically useless. People simply do not understand half of what I say even if I speak slowly and quietly.
Cheers,
Oliwer
You have to press
Cam+power and it will show radio
....
In settings that radio has nothing to do with one installed...Do you know that the radio does?
It allows custom roms like cyan to be installed while keeping root access. The rom allows some tmo apps like account to still be used here in the states.
yes oliwer i get the same formatting cache message but nothing else happens. i tried in cyans recovery and amons recovery using only button shortcuts and not the trackball. i always named the radio update.zip, but still no luck. Im not sure if the 26i radio requires a certain version before it can upgrade, like maybe i have to upgrade to another radio before i can get to 26i? im not quite sure...ive run out of ideas on what to do. I dont have a warranty or anything on my g1. does the fact im using a donut rom on a cupcake radio have anything to do with it? if i had a cupcake rom and upgraded the radio to 26i from there would it work? i know these might sound like dumb ideas but im still relatively new to the scene and im running out of ideas as to why this is happening or why i cant solve it..
bump? anyone have a solution for us? or advice?
i just realized that i had android 1.1 with the 1.22.14.11 radio when i first got my phone, when t-mobile gave me the 1.5 update, i was still stuck on the same radio for some reason. After that I used the one click method to root and ive been on dwang donut rom ever since with the same dated radio...Ive tried using cyans recovery to flash and still no luck, no error, it says its updated but when i check the baseband or stock spl its still the same radio. I never went for a danger spl when i rooted because i was afraid to brick so i cant fastboot a radio update. I asked in another topic if it was possible to use the "flash_image" command in terminal to flash the radio but i dnt think itll work and i dont wanna risk it. If anyone has any advice or a possible solution please keep us updated.
Thank you!
Turn your phone off, hold the camera button down, and power on your phone.
What do you see?
each time before and after the flashing of the radio using cyans or amons recovery image id get the same rainbow screen saying
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.14.11
Serial0
so im still stuck on the Android 1.1 radio.
speedysilwady said:
yes oliwer i get the same formatting cache message but nothing else happens. i tried in cyans recovery and amons recovery using only button shortcuts and not the trackball. i always named the radio update.zip, but still no luck. Im not sure if the 26i radio requires a certain version before it can upgrade, like maybe i have to upgrade to another radio before i can get to 26i? im not quite sure...ive run out of ideas on what to do. I dont have a warranty or anything on my g1. does the fact im using a donut rom on a cupcake radio have anything to do with it? if i had a cupcake rom and upgraded the radio to 26i from there would it work? i know these might sound like dumb ideas but im still relatively new to the scene and im running out of ideas as to why this is happening or why i cant solve it..
Click to expand...
Click to collapse
I do not know, really, why the radio refuses to upgrade. Since my last message I have read tons of posts on this issue and nearly ALL people can upgrade the radio firmware easily, just like the SPL. Somehow, I can upgrade the SPL to whatever I want, but not the radio. Very strange indeed and no luck so far.
Oliwer
speedysilwady said:
bump? anyone have a solution for us? or advice?
i just realized that i had android 1.1 with the 1.22.14.11 radio when i first got my phone, when t-mobile gave me the 1.5 update, i was still stuck on the same radio for some reason.
Click to expand...
Click to collapse
Exactly the same in my case. Except they upgraded straight to 1.6. Before the upgrade I have 1.1 firmaware and quality of voice was perfect. After the upgrade things went south.
speedysilwady said:
After that I used the one click method to root and ive been on dwang donut rom ever since with the same dated radio...Ive tried using cyans recovery to flash and still no luck, no error, it says its updated but when i check the baseband or stock spl its still the same radio.
Click to expand...
Click to collapse
Same thing with me.
speedysilwady said:
I never went for a danger spl when i rooted because i was afraid to brick so i cant fastboot a radio update.
Click to expand...
Click to collapse
Well, I installed HardSPL and it worked despite the old radio. HardSPL offers FASTBOOT and I use it at times. This is safe, at least for me.
speedysilwady said:
I asked in another topic if it was possible to use the "flash_image" command in terminal to flash the radio but i dnt think itll work and i dont wanna risk it.
Click to expand...
Click to collapse
Well, I did, but it does not work since flash_image updates partitions and G1 does not have radio partition. So, when you try to update the radio.img it tells you no radio partition. It is only possible for Roger G1 since it has radio partition unlike all other G1s and there you could upgrade the radio with flash_image.
speedysilwady said:
If anyone has any advice or a possible solution please keep us updated.
Thank you!
Click to expand...
Click to collapse
Yeap! I just practised how to un-root the phone straight to 1.6 with the original SPL and recovery and I was able to restore my phone to the state before rooting and I plan to give it back to my operator under warranty and ask to get this radio fixed. I will do it next week. I will report if the authorized service will be able to upgrade the radio.
Oliwer
Hello everyone. I have a problem with my new Hero. It's fresh, I haven't root or up rom yet. Only unlock it with a code bought from Internet. Yesterday, my nephew (4yo) used it to play some simple games. When I got it back, the battery ran out. So I connected it to a charge and turned the phone on but it stucked at the boot screen, only displays the "Hero" line. Nothing worked (touch, buttons). I had to take out the battery to turn it off.
So, I tried many ways: took out the battery and put back, took out the Sim card, sdcard, battery and put all back, etc. Nothing works. I decided to hard reset the phone by pressing Home, Return and Power buttons. After few seconds of erasing data, it told me to press the Menu button to restart the phone. I pressed the Menu and again, the anoying "Hero" line appeared.
I assumed that while playing games, my nephew might press some buttons to ativate or erase something that I don't know. So I ask you pros can you guess what is the problem and if you know it, what can I do to get my Hero works again? Many thanks to you all!
Don't turn it on but charge it up until you think its full then try to boot again.
Lennyuk said:
Don't turn it on but charge it up until you think its full then try to boot again.
Click to expand...
Click to collapse
I'va tried this way too, still no work. Thanks anyway.
right this way may work but you will lost all your data.
turn the phone on as best you can do and leave it on, plug into a pc and try to reinstall the RUU from HTC's website (latest rom) this will wipe everything and restart.
That should work but you would lose everything.
The other way is to try to use adb to control the phone.
Yes, I was thinking of reinstall the RUU too. But the latest ROM in HTC website is 2.73.61.5 but mine is 2.73.73.x (It's a HTC Hero from Orange - France). Is is safe to downgrade the ROM?
topifone said:
Yes, I was thinking of reinstall the RUU too. But the latest ROM in HTC website is 2.73.61.5 but mine is 2.73.73.x (It's a HTC Hero from Orange - France). Is is safe to downgrade the ROM?
Click to expand...
Click to collapse
no harm in trying.
Can you not find the RUU for your orange France phone? i.e. the same one you were already on.
OK I will try with the RUU and report later if this works or not.
I think Orange France has modified the original ROM of HTC.
topifone said:
Yes, I was thinking of reinstall the RUU too. But the latest ROM in HTC website is 2.73.61.5 but mine is 2.73.73.x (It's a HTC Hero from Orange - France). Is is safe to downgrade the ROM?
Click to expand...
Click to collapse
Really?? How you manage to get a 2.73.73.x
I tot the latest build for the roms was 2.73.61.5...bizzare
Anyways it should allow you to downgrade fine because i remember i did it to return from 2.73.61.5 to the older rom because i wanted to root it...suprisingly i didnt have to use the goldcard method or anything to downgrade
nicknyhk said:
Really?? How you manage to get a 2.73.73.x
Click to expand...
Click to collapse
I don't know Now I cannot turn the phone on to verify but I am really sure because of the repeatation of the number 73 (the last number, x, I don't remember though)
Okay this is what happen I had files in my SD card and there was this exe file that i downloaded onto the phone it rebooted and then it stays stuck on the tmobile slpash stick together screen. Tried downloaded a different ROM to the phone but still wont work. I dont know what else to do? Should i return it back to Tmo US and what should i say? Can anyone please help.
Never mind iI fixed it thank you all for your help.... Great Community
You take it back and tell them pretty much that after reboot it simply got stuck... They have lot more capabilities of fixing it quickly then you with replacing ROMs, etc.
i dowloaded the spl 1024 can i go back to tmo regular rom US
eenbox said:
You take it back and tell them pretty much that after reboot it simply got stuck... They have lot more capabilities of fixing it quickly then you with replacing ROMs, etc.
Click to expand...
Click to collapse
jgu71424 said:
Okay this is what happen I had files in my SD card and there was this exe file that i downloaded onto the phone it rebooted and then it stays stuck on the tmobile slpash stick together screen. Tried downloaded a different ROM to the phone but still wont work. I dont know what else to do? Should i return it back to Tmo US and what should i say? Can anyone please help.
Click to expand...
Click to collapse
1. Did you flash HSPL ?
2. Are you a new in flashing ROMs
Turn mobile off, turn it on with volume key down. Connect phone to PC using USB cable (word : `serial` changes to `USB`), flash HSPL (if you didn`t flash it already), flash stock ROM or custom ROM (some custom ROMs require to flash radio first).
Kris
EDIT :
Sorry didn`t see some first answers. If you didn`t mess around SPL, you didn`t loose your warranty .. I would take it back to the store. If you changed SPL you can still reverse it and than take it to the store. If you don`t want to, you can follow procedure above (at your own risk).
Yes i did flash HSPL 1024 for Tmmo US and had a custom ROM on it. And sort of yes. Do you know where i could get the stock rom so it could back to tmo and i could return it and tell them after leaving it overnight charging with the phone completly off and turning it on in the morning it stayed at the tmo screen. Lets see what they say. But can you or someone give me the stock rom
kregowski said:
1. Did you flash HSPL ?
2. Are you a new in flashing ROMs
Turn mobile off, turn it on with volume key down. Connect phone to PC using USB cable (word : `serial` changes to `USB`), flash HSPL (if you didn`t flash it already), flash stock ROM or custom ROM (some custom ROMs require to flash radio first).
Kris
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=609477
Link for TMO US HSPL is down? hope it comes out soon.
kregowski said:
try this
http://forum.xda-developers.com/showthread.php?t=609477
Click to expand...
Click to collapse
Just get notification...hope tha camera lag is gone..
Just installed it also myself, would be nice to see somekind of changelog
luun said:
Just installed it also myself, would be nice to see somekind of changelog
Click to expand...
Click to collapse
We will see...dowloading and starting to test camera
It's allready installing for 30 minutes, got a black screen with a phone image looking a bit like the DHD with a red triangle (with an exclamation mark) on it. Should I wait longer or do something?
Tsurany said:
It's allready installing for 30 minutes, got a black screen with a phone image looking a bit like the DHD with a red triangle (with an exclamation mark) on it. Should I wait longer or do something?
Click to expand...
Click to collapse
I really don't know, i just start update..hope that everything will be ok..
Not got any updates showing have got a uk unbranded unlocked version what version s have people got who can update ? Does the new update do.out speed wise etc ?
Sent from my Desire HD using XDA App
have been running this since sat or sun when the ruu was posted in the roms area. It is android 2.2.1 its quite nippy but. IT WILL STOP YOU rooting your phone the new radio it quite a lot better in both signal and battery useage.
Yes! Updating..
for those who like to maintain the root option, make sure you get Radio S-OFF before updating
this way you can always go back once a root a solution was found
http://forum.xda-developers.com/showpost.php?p=10040157&postcount=255
Originally Posted by afrcom15
ok i just had to re-read the whole thread to try and understand the situation
can someone please answer if i understood correctly
- If i have radio S-OFF, i can flash using the mentioned method and have root, but i can't have the new radio
If you have radio S-OFF you can flash but will lose root. Normal rooting method will not work, you can have the new radio, you still retain the ability to return to the previous rom though. You will remain S-OFF
- If i have ENG S-Off, i can flash it as well as the new radio but it will crash on SU and won't have wifi
If you have ENG S-OFF only then you will lose everything and still not have root, you will also lose the ability to return to the previous rom. You will become S-ON.
also i didn't understand will wifi still work using the radio s-off method?
Wifi works on either S-OFF.
Click to expand...
Click to collapse
Tsurany said:
It's allready installing for 30 minutes, got a black screen with a phone image looking a bit like the DHD with a red triangle (with an exclamation mark) on it. Should I wait longer or do something?
Click to expand...
Click to collapse
It's now been almost an hour, anyone got any ideas what to do?
Tsurany said:
It's now been almost an hour, anyone got any ideas what to do?
Click to expand...
Click to collapse
take out the battery, wait 10 seconds, put the battery back and pray it will boot after you turn on the phone.
from what i can notice is that i have more ram available, till now with a "kill all" had 350 mb now i have 440 mb free ram.
That sounds bad, any way to restore if it doesn't boot? Phone is not rooted or anything like that, so no clockwork recovery.
Tsurany said:
That sounds bad, any way to restore if it doesn't boot? Phone is not rooted or anything like that, so no clockwork recovery.
Click to expand...
Click to collapse
well the red triangle means something went bad, i remember that i got the same message when i tried to back`up my rom with clockwork recovery but after i got the battery out and turned on the phone it was OK, but after i installed an official RUU because the system was ****ed up.
Well it booted fine, that's a relief.
I am now doing the update. (running Core Rom).
I get the exclamation sign with the little android puppet. Will wait 10 minutes. If no reaction I will restart.
Tried again, same thing as before, phone icon with exclamation sign. Guess there is either something wrong with my phone or with the update. Guessing the latter.
you will run into problems if you attempt the OTA from a custom rom
Afaik it`s not recommended to install OTA`s if you are are running custom roms so be carrefull.
@tsurany i doubt it`s the update because i made it too and it`s ok but i have to admit that i installed an oficial rom before just to be CLEAN but dunno what to say, it`s a pain to remake everything.
Well tried it with a custom Rom. It didn't work as expected. After battery removal it doest restart and function normally.
Update installed fine here. I don't really notice a huge improvement in low light video recording..
I have a leo1024, i tried to install nand android. I HSPL to 3.03 and then did magdlr 1.13, after that it was stuck on stick together screen. I found out that it needs to be hspl 2.08, and tried to downgrade by installing an older official stock rom. The stock rom i flashed was 2.01.531.7 through usb bootloader. After it was done it shut off and now wont turn on at all it wont charge, and wont go to bootloader. the screen just stay off. HELP!!
Do you have a spare battery that you can try?
Nick.C said:
Do you have a spare battery that you can try?
Click to expand...
Click to collapse
No I dont. When I flashed the stock rom it finished all the way and then doesnt turn on
Koolkidz said:
No I dont. When I flashed the stock rom it finished all the way and then doesnt turn on
Click to expand...
Click to collapse
Try to get another battery..hweva i suspect u've bricked ur device as i read somewhere that in order to reflash stock rom after using hspl...u have 2 flash the stock rom via sd card method as flashing thru a windows pc bricks d device...
i hope not but u r probably one of d unlucky few...also locate and try flashing the official Tmobile update which is RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship.exe
voncrane said:
Try to get another battery..hweva i suspect u've bricked ur device as i read somewhere that in order to reflash stock rom after using hspl...u have 2 flash the stock rom via sd card method as flashing thru a windows pc bricks d device...
i hope not but u r probably one of d unlucky few...also locate and try flashing the official Tmobile update which is RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship.exe
Click to expand...
Click to collapse
I can't because i wont go to bootloader, it doesnt turn on. the computer doesnt even recognize the device.
Koolkidz said:
I can't because i wont go to bootloader, it doesnt turn on. the computer doesnt even recognize the device.
Click to expand...
Click to collapse
That's y i suggested u get another confirmed & working fully charged battery...Buy or borrow 1 if u ave 2...its just 2 confirm its not ur battery acting up..if it comes on then cool, else hope u r insured..
did you allready take out the battery and put it back?
greg17477 said:
did you allready take out the battery and put it back?
Click to expand...
Click to collapse
I took out the battery and kept it out for at least 30 minutes but no luck. Now everytime i put the battery in I can feel the vibration alittle but wont turn on still.
its because that rom isn't for tmous. it IS a tmous rom, but it was built for development purposes to be used on a regular hd2.
The radio it includes 2.05.50.x is one of two radios (2.04.50.x and 2.05.50.x) that have the same effect as a ..51.. radio, , i.e black screen, no boot, no bootloader, faint vibration, computer looks for and fails to find qualcomm drivers, etc, etc.
Normally i would say 'its dead', but there have been one or two (out of several hundered) threads where after several slightly bizarre steps, (chilling the battery/phone, using certain test roms, standing with one foot in a bucket of pigs tears at midnight, etc) phones have been brought back to life ---BUT--- i suspect these may be slightly different circumstances, so whilst hope is always good, prepare for sadness.
If its under warranty, thats your best option.
Good luck.
EDIT - the bucket of pigs tears may or may not be necessary
Koolkidz said:
I have a leo1024, i tried to install nand android. I HSPL to 3.03 and then did magdlr 1.13, after that it was stuck on stick together screen. I found out that it needs to be hspl 2.08, and tried to downgrade by installing an older official stock rom. The stock rom i flashed was 2.01.531.7 through usb bootloader. After it was done it shut off and now wont turn on at all it wont charge, and wont go to bootloader. the screen just stay off. HELP!!
Click to expand...
Click to collapse
what have u done about it,did u boot it??? i have the same problem?
dulexetina said:
what have u done about it,did u boot it??? i have the same problem?
Click to expand...
Click to collapse
If you've flashed a .50 radio on your T-mobile HD2 your HD2 is dead and can't be revived. Unless you find somewhere that can JTAG it for you.
Sent from my HTC Vision using XDA App
Skellyyy said:
If you've flashed a .50 radio on your T-mobile HD2 your HD2 is dead and can't be revived. Unless you find somewhere that can JTAG it for you.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
I know (now),got it to service today and it will be done soon... I also found out that the thing u do when flash a wrong radio u kill ur bootloader totally,and erase the drivers of CPU,GPU all of them-that is why we cant anything wtih it...
Really scared me today when screen just stayed "dead" no matter what u do
You know more than me about what happens. Did the guy in t-mobile tell you what you did wrong lol?
Sent from my HTC Vision using XDA App
Skellyyy said:
You know more than me about what happens. Did the guy in t-mobile tell you what you did wrong lol?
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
t-mobile wont say anything once you tell em you hacked it lol