Has anyone successfully replaced the digitizer for our phone?
Any site you'd recommend? Any video or instructions you used?
I remember coming across a few posts where after replacing the digitizer it didn't work.
So I'm just trying to find someone who has successfully done it.
Thanks.
*bump anyone?
are you sure you want to try replacing the digitizer? as far as i know mt4g's screen is something like S-LCD (or may be true S-LCD) which mean the LCD are very very close with the digitizer.
when you decide to replace the digitizer you should make sure you can replace it precisely. no dust left behind and so on.
i think it is better to buy a set of assembled front bezel, LCD and digitizer. so you just replace the front area of the phone.
mniroy said:
are you sure you want to try replacing the digitizer? as far as i know mt4g's screen is something like S-LCD (or may be true S-LCD) which mean the LCD are very very close with the digitizer.
when you decide to replace the digitizer you should make sure you can replace it precisely. no dust left behind and so on.
i think it is better to buy a set of assembled front bezel, LCD and digitizer. so you just replace the front area of the phone.
Click to expand...
Click to collapse
Might you know where I can buy something like that?
So anyone have any luck replacing a digitizer that could help me out here?
Thanks again.
nguyendqh said:
Might you know where I can buy something like that?
Click to expand...
Click to collapse
here, very easy to replace :
http://www.ebay.com/itm/FULL-LCD-DI...984?pt=LH_DefaultDomain_0&hash=item2a12834fe0
or if you want only digitizer+lcd assembled just search it on ebay.
mniroy said:
here, very easy to replace :
http://www.ebay.com/itm/FULL-LCD-DI...984?pt=LH_DefaultDomain_0&hash=item2a12834fe0
or if you want only digitizer+lcd assembled just search it on ebay.
Click to expand...
Click to collapse
Awesome thanks bro.
I have replaced a few digitizers on mytouch 4g's. A trick to keep dust out is to get the adhesive strips and put it around the side of the digitizer too so you seal around the frame.
how difficult is it to replace it?
I'm thinking about doing that but read many comments about cracking the digitizer...
so , should I try it or should I just give up and live with that little crack?
rotman253 said:
how difficult is it to replace it?
I'm thinking about doing that but read many comments about cracking the digitizer...
so , should I try it or should I just give up and live with that little crack?
Click to expand...
Click to collapse
It's not just the hazard of breaking the digitizer...the result would not be that same as before. Initially the gorilla glass is glued together with the digitizer and the replacement is most probably a cheap plastic, that cannot have the same feeling nor the same response
aris_p said:
It's not just the hazard of breaking the digitizer...the result would not be that same as before. Initially the gorilla glass is glued together with the digitizer and the replacement is most probably a cheap plastic, that cannot have the same feeling nor the same response
Click to expand...
Click to collapse
I believe I bought an original replacement from UK ...
question is how complicated is this procedure and if by hitting the device screen so much I can harm the digitizer or some other internal parts...
It's difficult to do it without proper tools. Putting the new screen on the digitizer is also difficult.
But if you have experience in these kind of thing, then you can do it.
Lennyz1988 said:
It's difficult to do it without proper tools. Putting the new screen on the digitizer is also difficult.
But if you have experience in these kind of thing, then you can do it.
Click to expand...
Click to collapse
what tools are those?
got a heat gun and plastic spudgers ... it came as a kit with the glass I bought
A UV light to set the glue is best. Makes it more responsive.
rotman253 said:
I believe I bought an original replacement from UK ...
question is how complicated is this procedure and if by hitting the device screen so much I can harm the digitizer or some other internal parts...
Click to expand...
Click to collapse
There isn't any genuine glass replacement as I was informed by Samsung Greece. Officially they only replace the glass WITH the digitizer.
readyfordeals said:
A UV light to set the glue is best. Makes it more responsive.
Click to expand...
Click to collapse
There are some people that they use this glue (without it, the responsivness after some time is decreased a lot ) but the problem is that they use too much and at the points that the UV light hasn't reached it is still liquid and can go everywhere
Hi All,
Broke my glass + digitizer, but lcd ok. Got a replacement and managed to separate the original lcd, what I'd like to know is do I really need to glue the lcd to the new digitizer? I've put it back together just loose for the time being and seems to look and work fine. Any risks to just glueing the digitizer/screen to the frame and leaving the lcd loose inside?
Also, I still have glue gunk on the lcd screen, I've ordered some "151 sticker remover" to get rid of it, but it occurred to me it might damage it. Anyone know if it would be ok? If not anything else recommended, maybe something I could make at home?
Thanks!
kaligula1234 said:
Hi All,
Broke my glass + digitizer, but lcd ok. Got a replacement and managed to separate the original lcd, what I'd like to know is do I really need to glue the lcd to the new digitizer? I've put it back together just loose for the time being and seems to look and work fine. Any risks to just glueing the digitizer/screen to the frame and leaving the lcd loose inside?
Also, I still have glue gunk on the lcd screen, I've ordered some "151 sticker remover" to get rid of it, but it occurred to me it might damage it. Anyone know if it would be ok? If not anything else recommended, maybe something I could make at home?
Thanks!
Click to expand...
Click to collapse
I am in search for digitizer. How much you got it for? Any sources?
I believe this video should help you. It mentions that you have to glue digitizer and lcd.
https://www.youtube.com/watch?v=MI55gTtLYHI
1078
IndianSuzuki said:
I am in search for digitizer. How much you got it for? Any sources?
I believe this video should help you. It mentions that you have to glue digitizer and lcd.
Click to expand...
Click to collapse
Thanks, on closer inspection I htink my colours are a little washed out without the glue, so am just going to go ahead and do it.
I got my digitizer off ebay, interestingly I see the ones on ebay in India are twice as expensive though, I would have thought they'd be cheaper. I'd recommend just getting a digitizer and lcd in one though. Like this one:
ebayDOTin/itm/For-LG-E960-Google-Nexus-4-E960-LCD-Display-Touch-Screen-Digitizer-Black-/121465367279?pt=IN_Mobile_Accessories&hash=item1c47e66aef
Costs twice as much, but it's much easier to install; you don't need to buy as many tools, UV glue and gunk remover. Plus there's a high chance of breaking the lcd when separating it from your broken screen, so you could well end up having to buy both anyway.
I read something about the replacement lcds being lower quality though, I don't know how noticeable that would be, but if you pay with paypal you'd probably be able to get your money back.
kaligula1234 said:
Thanks, on closer inspection I htink my colours are a little washed out without the glue, so am just going to go ahead and do it.
I got my digitizer off ebay, interestingly I see the ones on ebay in India are twice as expensive though, I would have thought they'd be cheaper. I'd recommend just getting a digitizer and lcd in one though. Like this one:
ebayDOTin/itm/For-LG-E960-Google-Nexus-4-E960-LCD-Display-Touch-Screen-Digitizer-Black-/121465367279?pt=IN_Mobile_Accessories&hash=item1c47e66aef
Costs twice as much, but it's much easier to install; you don't need to buy as many tools, UV glue and gunk remover. Plus there's a high chance of breaking the lcd when separating it from your broken screen, so you could well end up having to buy both anyway.
I read something about the replacement lcds being lower quality though, I don't know how noticeable that would be, but if you pay with paypal you'd probably be able to get your money back.
Click to expand...
Click to collapse
The link is dead. But i guess the product refers to complete front panel of phone. I did same thing. The panels are China made. The quality is no where close to original. I suggest you to not buy it online. You should go to mobile repair store and ask them to do it. The reason is the panels are faulty and if so then they will quickly replace it. I did couple of time after which got a better one.
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Hi to be very honest here I've never ever had to replace or fix the glass to my $7 Edge, my $7 Edge is on excellent condition but I'm thinking of one day either updating to the Note 8 or even Note 9. Have you got any quotes yet from repair places
Sent from my SM-G935F using XDA-Developers Legacy app
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
On the newer phones is not really possible to separate the different layers on the display. (even back in the days when the layers where a lot easier to separate - it was hard, only on some displays and always the new layers started to separate leading to dust behind them and so on). You must change the whole screen as a one. Sorry... :/
Im a cell phone repair guy. Like stated above you must replace the entire digitizer/lcd assembly. They are pricey. If you have insurance it may be cheaper. Your looking at $200-$250 for a quality unit.
https://www.ebay.com/itm/LCD-Displa...hash=item4b178e5337:m:mtuyciust4Tmlx1CeklwU-g
Then you will want to get a good tool kit like so. Thats another $60
https://www.ifixit.com/Store/Tools/...pEP-Ge4NWU0H9RKOGFUtVKLOoWZ-d4BBoCMwkQAvD_BwE
Then you can follow this for teardown. Just remember you can damage more stuff when working the first time on something like this. It will cost even more money. It might just be better to use insurance or have a pro do it.
https://www.ifixit.com/Teardown/Samsung+Galaxy+S7+Edge+Teardown/56845
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
awerqw22 said:
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
Click to expand...
Click to collapse
nebraska
BDog21 said:
nebraska
Click to expand...
Click to collapse
So were continents away. Lol. Buy yeah its possible, with the right tools. You can do it yourself but its very risky. Some do it manually some use tools. Some separation machines use dry ice.
Also, remember that if you're replacing the entire OLED, glass and digitiser as a single unit, if you're buying a generic replacement rather than Samsung parts, the OLED panel in particular could easily be of inferior quality. Or perhaps not even OLED at all, rather a standard LCD replacement. I'd rather not think of this phone without the quality of screen it has, it's half the appeal and what makes it a premium device in the first place.
its possible, repair is done within 3h.
you can try it at home, you need slim cards and wire, but it's not worth the risk.
I paid 120$ in Poland for glass replacement. they have separating machine - it freeze the glue so it's easy to take the glass off the screen. later it's just loca or oca