What Software Do "Samsung" Use To Reset Phones ? - Galaxy S 4 Q&A, Help & Troubleshooting

I recently had my S4 (FW 4.22) locked up at the "Firmware upgrade encountered an issue ..." screen and couldn't do anything to fix it (Kies didn't work).
I could enter the downing screen, but using Odin and the stock roms I'd saved, did nothing.
So I had to take it to a repair centre to have it re-flashed for a fee.
I asked the guy what software they used and he wouldn't tell me, but said it was "Samsung's own".
BS probably, but that was his answer.
If I ever get my phone totally locked up again, what software should I use to unlock it/re-flash it ?
Is Odin the software they would have used or there something else ?
Thank you.

use samsung kies. power off your phone. after 5 seconds, press; vol down + home button + power button simultaneously until you see a display in your screen. then, press vol up to go to Download Mode. plug your phone to your PC and wait. just read some of your options on your screen.
Sent from my GT-I9505 using xda app-developers app

aerobomb said:
use samsung kies. power off your phone. after 5 seconds, press; vol down + home button + power button simultaneously until you see a display in your screen. then, press vol up to go to Download Mode. plug your phone to your PC and wait. just read some of your options on your screen.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
Kies, didn't work for my at all. Even when the phone was in downloading mode.
I followed this guide and when I reached no.5 I was unable to enter my model number.
Code:
http://www.droidviews.com/firmware-upgrade-encountered-an-issue-solution
Trying Win 8.1 (current working system and a clean install of Windows, plus Win7 on a laptop), various USB ports/cables.
Nothing worked.
After I got my phone fixed, I tried Kies again as a test. I couldn't get it to work. Kies said the phone couldn't be initialised or something.

To flash firmware - Odin, and they'd likely use RIFF boxes/similar for other stuff (re-writing IMEI's/etc).

MistahBungle said:
To flash firmware - Odin, and they'd likely use RIFF boxes/similar for other stuff (re-writing IMEI's/etc).
Click to expand...
Click to collapse
Thank you.

Why do you think that one of the service centers or Samsung will give you software or information

The software and JTAG that samsung own are not for public use.
You do see the odd person pop up offering this service and the are usually service agents for Samsung.
Sent from my GT-I9500 using Tapatalk

I was just thinking if I had the name of the software.
I might be able to find a leaked version online and not have to waste time and money in travelling to a service centre, should the need arise again.

I think you will need the USB dongle as well as the software to force a flash, not sure if the dongles are available, maybe try eBay
Thanks
Z
Sent from my GT-I9500 using Tapatalk

zetex said:
I think you will need the USB dongle as well as the software to force a flash, not sure if the dongles are available, maybe try eBay
Thanks
Z
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Thanks. Yes they available, example:
Code:
http://www.ebay.co.uk/itm/Micro-USB-Jig-Dongle-Download-Mode-For-Samsung-Galaxy-S4-S-IV-I9500-I9505-LTE-/271278474484?pt=US_Other_Cell_Phone_Accessories&hash=item3f297504f4
They just appear to allow you to enter download mode.
I suppose if you can already access that mode, there's no point buying one.

Related

[Q] SGS Problem That Nobody Can Fix?

The main Samsung Approved Service Center here in Kenya has just given up on my SGS 1900 UK Model Nov 2010, originally 2.1 firmware upgrade via KIES to Froyo 2.21 in March 2011. They have handed it back unfixed after a week. Cant find a problem like this on any forum/google. Can find one that is fixable with the resistor jig, but Samsung dealer says his jigs don't help:
1) Press power, on comes B&W Samsung GT I900 screen, then the mosaic graphic that resolves to the glowing big "S". Then it buzzes feebly. Eventually it goes black but keeps buzzing now and then. Power off works.
If you poke around trying to get it into 3 touch reset, the Menu and Back keys light up and stay lit.
2) 3 Touch reset will not work. Dunno if it ever did as never tried before.
3) Plug into USB charger, it charges fine and shows the charger icon.
4) Plug into KIES and after a lot of attempts, KIES identifies it + firmware and connects. I can see and save my contacts and it displays CONTACTS, INTERNAL SD and CALENDAR folders in KIES. No more
5) ODIN ( which I dunno how 2 use but have) sees the SGS's COM when I plug it to my comp.
6) The dealer claims to have tried to resart/reflash with Samsung jigs. He has handed it back with a "cant fix".
What the heck is going on here? Looks like I have lost a few hundred bucks and have to throw it away.
When did this start? Phone was working perfectly. Suddenly a solid red icon with large white star labelled "Web Page" appeared on home page but no such App was found in SETTINGS>ETC. In any case, "Web Page" just led me to a totally innocuous page I use all the time as a homepage on INTERNET app. A few starts and shutdowns after that ( the battery was getting low so swx'd on and off like 3 times over an hour), it just went into (1) above.
Phone is STOCK, no mods, no reflashes,no rooting etc
Thanks
Peter in Darkest Africa
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. Get your phone into download mode by pressing volume down+menu button+power button until you get the yellow screen showing the android working. then open odin 1.7 and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
flash Darky Rom 10.1 with JVO Modem . Best GPS i´ve ever had, and my GPS was really bad.
frostygenius said:
if odin can 'see' you handset, have you tried flashing the ROM again? find a stock froyo rom from one of the threads here in the general section (click here) or download from samfirmware.com .
Once you have the rom files, kill all the KIES tasks using the task-manager in windows. then open odin and connect your handset. once odin connects, click on the buttons for PDA,PHONE and CSC in odin and browse to the appropraite file which you've download in the rom. also click on the PIT button, browse to the odin folder and select the 512.pit file. Once this is done, check the main odin window to make sure the check-box next to 're-partition' is checked. click start and it should flash the new firmware for you.
Disclaimer: I do not take responsibility for any harm that may come to your phone during the flashing process. The instuctions above are accurate but are to be performed at your own risk.
Click to expand...
Click to collapse
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Ok, I dunno if this is gonna help but I had a very similar issue when I first got my phone, within a week of owning it.
Points 1-3, exactly what happened mine.
Points 4 & 5 I didn't try, (was fairly new to Android)
Left it in to my local Vodafone shop & within 5 days I had it back in perfect working order, the maintenance report stated faulty hardware, the display module had to be replaced. Maybe worth mentioning to the service guy?
R34L2Pac said:
@frostygenius
I don´t think that your instrunctions ARE accuarate. You don´t even mention that he has to be in Download mode if he wants to use Odin. Also you advise to connect phone right after opening Odin and than insert the files, but some versions of Odin are known that they malfunctioning if you do this in this order, You should first insert files and set odin and after that plug in your phone.
And if he claims that he is on stock since bought the phone, so maybe he never used it before.
@peterg123
I´m not exactly following what happens to your phone. If I understand correctly the Samsung released defective ROM via KIES and after a week turn it down? But you already updated and now your phone is broken? If yes, I think that Samsung service center should repair your phone or if its serious damage than even replace it.
Is the phone able to boot-up and work properly? Is your recovery mode and/or download mode working? If the download mode (use 3-button combo - VolDown+Home+Power) is working then you can try recover on your own, but be careful, dont do anything before you are sure that you know what you are doing. You can go through this post before start [HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!].
Also go through the forum or samfirmware.com and find your official version of rom (Eclair 2.1) to be sure that you can anytime revert to this one because of warranty.
EDIT: Also can you please post some photos or video showing what happens to your phone?
Click to expand...
Click to collapse
Thanks for the heads-up I forgot to mention those points. I've updated my original post.
Sent from my GT-I9000 using Tapatalk
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Yes you are correct, I can't get download mode. The phone has never been reflashed or messed with. It came with 2.1 and using KIES in March I reflashed to 2.2 and it worked perfectly for 10 weeks until it semi-bricked.
There is the Black Screen of eath...then there is the pulsasing S screen of limbo! That's what I have.
The only harwdare clue I have is the SGS blew the fuse in my car charger shortly before "expiring"...yet if connected to USB or other charger, it charges the battery and displays the logo.
peterg123 said:
Thanks, it is not possible to get into download mode, or I would have done all that. As explained, the phone will not go past the giant "S" logo ( 3rd screen after power on). This problem has happened to many people, worldwide.
As explained the three button default firmware does not work.
The Samsung repair agent claims to have used the 301k resistor method to restart the phone and even that failed. I am not sure if this is true but he said so.. not sure because everybody reports success with this.
ODIN, as I said ( 1.8) recognises the COM connection just as does KIES. The problem is, I am not in download mode so can't reflash if I tried.
I have used the phone for 10 weeks since firmware upgrade from 2.1 to 2.2 during which I had no problems except the occasional process stopped errors.
Hope this help, thanks for trying for me
Click to expand...
Click to collapse
..But download mode doesn't display the S logo or even the first Galaxy S 1900 logo...it goes straight in.
Try looking up in the Development section - I'm sure there is a jig method in there and it might be worth trying yourself, you've not got mush to lose now.
If you can get into download mode eventually, search for and flash Ezbase, that will get you onto a rooted firmware and it works EVERY single time for me. Good luck.
@R34L2Pac
Hi, thanks. As posted, the stock UK model SGS 1900 with 2.1 Eclair worked perfect from Nov to March 2011, was firmware upodated by KIES in March 2011 to 2.2.1 Froyo and worked like a dream until it went "semi-bricked" with the "Logo of Limbo" screen ( the pulsating giant S) for no reason.
A week before this, I changed SIMs when I changed countries and for some reason lost all added apps. I had to re-install them and even then, sometimes twice as I got many "android process stopped" errors --- even on some of the Sansung installed ones like Layar. That is the only problem I ever had.
The phone has only had apps from Market and never been modded whatsoever. Many thanks
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
R34L2Pac said:
Hi,
You said that you can see a pulsating S logo, sound to me like your phone is bootlooping. But you didnt mention if you can get at least to recovery(VolUp+Home+Power)? If you can get into recovery, you could try just factory reset your phone from recovery and reboot your system.
Also in the development forum you can find some kernels which can be flashed via recovery (like speedmod K13 for Froyo), so you can try to flash this kernel and after reboot into CWM recovery you could try to connect phone to ADB and type the command "adb reboot download".
I read on the forum that the home-made jig method worked for everyone, so looks like the samsung technician was doing something wrong. It is worth trying to made one a see what it does. Also found this thread, where user cuperus claims that even with charger can be simulated the jig by heating-up your device. So you can also try it, just plug your phone to a charger, let it charge for 1hour and than try use 3-button combo to go to download mode.
Click to expand...
Click to collapse
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Try en carefully learn hw to use odin coz I gt tha same exact model. I hav flashed mine many tyms en am on 2.3.4 XXJVP. if u do gt into download mode odin will sort u. Regards frm K.poly.
Sent from my GT-I9000 using XDA Premium App
peterg123 said:
Sorry I should have mentioned that it will not get into 3 button recovery mode, that has zero effect or rather, just sends it to the "Logo of Limbo" ( pulsating "S") just as does the power button.
Will maybe try a long charge time and see if that helps! Many thanks
Click to expand...
Click to collapse
how long have you tried holding down the 'volume down+menu+power' keys? a simple quick press of the three buttons does not work. you have to keep holding them all down for a bit (sometimes upto to 15-20 seconds) for it to go into download mode.
Sorry for the fast answer but I'm at work atm... I think he needs to do the 3 combo button fix on his phone first. I know it's on the forum somewhere... Can anyone check it for him? I lost the 3 combo the first time I updated with Keys from 2.1 to 2.2 and I had to fix it using a program that I can't remember to go on download mode and apply that fix.
Then he can use Odin to flash a stock rom as he needs, plus having 3 combo fixed!
Good luck mate!
Sent from my GT-I9000 using XDA App
Possible fix for your problem
Hi peterg,
I was looking through the general forum and found this post, where user beamzuk1 describes method how he fixed his semibricked phone. Symptoms are the same (not booting, glowing soft-keys, vibrating, no recovery and no download mode). So he used 'adb reboot recovery', I would say that proper command is 'adb reboot download', but you can try both. Also go through guide HOWTO use ADB, which I posted here the link in earlier post.
Hope this will help.
PS: Try follow beamzuk1 step-by-step, because if you start phone earlier than you connect it to pc, adb might not recognize the phone. Also be sure that you have correctly installed drivers and android-sdk before you try this.
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
LiverpoolFCfan said:
These phones come with a 2 year warranty. Why don't you contact Samsung directly yourself - telling them that the local repair centre wouldn't fix/replace it for you. If you did nothing besides what you described, then I would have thought you were entitled to have it fixed or replaced by Samsung.
Click to expand...
Click to collapse
+1
Also think that Samsung should repair it or replace it.
The fact your repair center has done nothing to fix your phone, in several occasions, now entitles you to brand new replacement or your money refunded in full, contract terminated and expenses paid for your losses incurred as a result of their negligence.
Why not hit them up for the SGS 2.
I had the same issue with my first Galaxy S...wifi stopped working at first, I turned it off then on again but nothing changed. So I rebooted to see if it would correct itself. Bootloops and no 3 button combo (download or recovery)
Sent it off to Samsung through the Carphone Warehouse in the UK. I'd contact a Samsung Service Centre directly if I were you.

Possible bricked device

Im unsure as to whether my Galaxy S is completely bricked.
My Galaxy S is stuck on a screen displaying - Phone ! Computer
I can't access download mode by the 3-button combo or by the USB jig.
Is there any way I can either boot the phone or get to download mode so i can flash with odin.
PS - I got to this stage by accidentally unplugging the device when flashing firmware in odin.
probably the answer is no im afraid if 3 combo AND USB jig isn't working...
Take the battery out for 10-15 min then place the battery and try Download Mode or the USB-JIG and see if get's to Download Mode.
Find someone with a riff box ... if your in the uk inbox me
Sent from my xxx using Tapatalk .
A friend of mine had a similar problem but the phone didn't show anything on the screen, I told him to do the button combo for donwload mode hold them for 10sec and connect it to the pc with odin open and it just work btw the screen wasn't showing download but it was, give it a try who knows
Sent from my GT-I9000 using xda premium
Now that my phones dead i have almost no way to access the internet so im sorry for the late reply
I'll try all these methods tonight when i get home from work.
Thanks everyone for your thoughts.
And btw I am in the UK, although I have no idea what a riff box is lol
A riff box is a box that fixes dead phones try asking your towns unlocking shop if thay have one if not inbox me and I'll run though the best way of getting your phone fixed
Sent from my xxx using Tapatalk.

Save my phone plzz. It won't boot!!!

Hi everyone,
I try to upgrade my girlfriend's phone via Kies mini last night. After this, IT CAN'T BOOT. I don't know what else to do now. I already search in google and this forum too but can't find any solution.
SOMEONE HELP ME !!!! IT'S REALLY EMERGENCY
Thanks
nguyen47 said:
Hi everyone,
I try to upgrade my girlfriend's phone via Kies mini last night. After this, IT CAN'T BOOT. I don't know what else to do now. I already search in google and this forum too but can't find any solution.
SOMEONE HELP ME !!!! IT'S REALLY EMERGENCY
Thanks
Click to expand...
Click to collapse
More info please
Download mode yes/no?
Sent from my Nexus S 4G using Tapatalk
I can't go to download mode or recovery mode . It scews me
if you have no way into download mode your screwed. Look for different ways into download mode and see if you can get it
Sent from my Nexus S 4G using Tapatalk
If you forsure cant get into download mode ask T-Mobile for a exchange. It is very easy to complete and since it happened after an official update you should have no issues completing the exchange
try pullin battery. plug phone into computer. hold volume up and volume down. put battery in. prest-o change-o you should see an android w/exclamation point in a triangle. if this fails a jig from skorpion(I believe that is his name) might help, just fyi ur vibe is probably 99% un-brickable.
Try to connect ur phone to pc & if you' ve seen an icon phone+pc+!, your in download mode..odin can read it..or you can simultaneously hold vol up + power to get into download mode
Sent from my SGH-T959 using XDA Premium App
You should download aio toolbox! Makes life easier..
Sent from my HTC Wildfire S
feckmu said:
try pullin battery. plug phone into computer. hold volume up and volume down. put battery in. prest-o change-o you should see an android w/exclamation point in a triangle. if this fails a jig from skorpion(I believe that is his name) might help, just fyi ur vibe is probably 99% un-brickable.
Click to expand...
Click to collapse
+1 I agree. Don't panic you'll make it harder on yourself if you do.
Sent from my SGH-T959 using XDA App

System Software Not Authorized Error AT&T

Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
VaRMiT said:
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
rayburne said:
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
Click to expand...
Click to collapse
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
VaRMiT said:
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
Click to expand...
Click to collapse
So you bought the phone and it has never booted for you?
If you have MF3 bootloader on there and someone tried to install a custom recovery it could be soft bricked.
Not sure what to suggest if you don't know what occurred to cause the phone to only go into download mode?
You could take it to best buy with a samsung experience center and have them reflash it?
The only problem with this is if you don't have MF3 bootloader, best buy will flash it and upgrade it.....
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
rushi.1986 said:
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
When you mean MDL. thats the stock rom correct? I do have that. When I look at Odin, it doesnt show anything on the COM part at the top left. Like its hooked up to a com port.
What I meant by the Downloading ...... (with the driod logo guy) Im saying I can get it to do that. Im at the point where I cant get the S4 to be reconized by ODIN. I have the stock rom, odin 3.07 files. I have tried to install the samsung usb drivers....
Still no reply on how to fix this? I have no clue on what to do here. I dont know what firmware etc is on it. I bought it this way. I just want to flash it back to factory, its the att version. It only stays on when the usb is hooked up. I can get it to go into download mode. But on the computer, it doesnt show a usb device being found. I can start odin up, but nothing appears on the COM to show what com port is available. Is there anything I can do here off of a SDCard? I also need to mention that I can not hold down vol up and power and home button to get it to go into recovery mode. It flashes it fast and goes to the yellow triangle.
Anyone please.....
You need to get Odin to recognize it. Try different usb cables. Use the usb ports on the back of the computer. Try a different computer. Without knowing the firmware you're on odin may not work, but it should still recognize your device. If you're on mdl firmware Odin will work. If you're on mf3 then you're sol.
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Br4nd3n said:
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried the power, vol up and home. It flashes the recovery, then goes back to the triangle. Odin, doesnt show a COM port that the phone is connected when i have it in download mode.
Also....i do appreciate you all for helping me figure this out.

Really bricked S7 Edge ATT help please

Alright so my phone is super bricked have the black screen with no lights basically like its dead. only way i know its not is because i can plug it into the pc and my pc makes the connected noise. pc also only recognizes it as the Qualcomm HS-USB QDloader 9008 driver and not the phone anymore. i can hold the power button for around 15-20 seconds and pc makes the disconnect noise not sure what thats about. ive been trying everything i can think of to restore it with no luck. wondering if anyone has a fix for it maybe. much much much appreciate it.
Can you get to recovery? Home, power, and volume up. I think my S4 did that once. I think I was able to flash stock firmware by going into the bootloader by volume down, power and home button. Odin saw it and successfully flashed the stock firmware. However, screen never worked so I had to send in for warranty replacement. But by flashing it and seeing it was good in Odin at least I knew they wouldn't see I had run custom stuff on it, lol. Good luck!
Sent from my SM-G935F using XDA-Developers mobile app
highaltitude said:
Can you get to recovery? Home, power, and volume up. I think my S4 did that once.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
not so far. i just uninstalled all the samsung and Qualcomm drivers reset pc, reinstalled samsung drivers and now when i put phone on pc is just says QUSB_Bulk and moved the location from Ports to other devices
I edited my post above.
Sent from my SM-G935F using XDA-Developers mobile app
highaltitude said:
Can you get to recovery? Home, power, and volume up. I think my S4 did that once. I think I was able to flash stock firmware by going into the bootloader by volume down, power and home button. Odin saw it and successfully flashed the stock firmware. However, screen never worked so I had to send in for warranty replacement. But by flashing it and seeing it was good in Odin at least I knew they wouldn't see I had run custom stuff on it, lol. Good luck!
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Tried that off and on with no luck does it matter what button order for bootloader?
Have to hold all 3 at once
Sent from my SM-G935F using XDA-Developers mobile app
highaltitude said:
Have to hold all 3 at once
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
yea thats all i can only do is keep trying to do that unless theres a way to flash S7 without odin or i happen to get odin to recognize it
if nothing shows up just take it to Samsung they should fix it if its still under warranty even if u voided warranty

Categories

Resources