Database Users

[Q] Samsung Galaxy S4 Odin Modem Flashing Issue

I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!

Also...
Also the solution on
http://forum.xda-developers.com/showthread.php?p=42418958
will not work for me because there is no .zip version of an LTE modem.

Is there any update on this? I can't figure this out for the life of me despite all the resources on these forums.

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Dude. I have the EXACT same problem as you, did you end up managing trying to find a fix for it?
I get the exact same errors exactly as you have listed. I'm also on Foxhound 3.4.

CuriosityBrah said:
Dude. I have the EXACT same problem as you, did you end up managing trying to find a fix for it?
I get the exact same errors exactly as you have listed. I'm also on Foxhound 3.4.
Click to expand...
Click to collapse
I can't find a fix. i gave up and went to paranoid android. the signal was too annoying for me to just deal with. still waiting for a recovery flashable lte modem for the s4. I bet that would make life so much easier.

Pickpoket said:
I can't find a fix. i gave up and went to paranoid android. the signal was too annoying for me to just deal with. still waiting for a recovery flashable lte modem for the s4. I bet that would make life so much easier.
Click to expand...
Click to collapse
I'm having this same exact problem wanting to replace a modem for fox hound diamond dogs 3.5. I've looked everywhere and followed all of the procedures, yet still no luck!

Bump

Temor said:
Bump
Click to expand...
Click to collapse
same here

zgarske said:
I'm having this same exact problem wanting to replace a modem for fox hound diamond dogs 3.5. I've looked everywhere and followed all of the procedures, yet still no luck!
Click to expand...
Click to collapse
Same here. I have Foxhound Diamond Dogs 3.6 and want to upgrade to the new 4.4 version. Getting the exact same error message that OP posted.

First time I post something useful and cant get help.
Since we are on our own, to those following the post.
Can you post...
Root procedure you used?
If you restored a back up, and are still facing the same issue?
what your "About Phone" reads under baseband after flashing a modem.
and if were all on carriers in US trying to flash a rom meant for international devices...<---this may be my issue.
Can you flash other KitKat roms?
"I flashed the Google KitKat edition, and it worked fine for a day. Rebooted my phone, started getting FC's by the second."
But yeah please just go through what you have done with your phone and the outcomes before this issue arose for you.
Some peer to peer research may extract the data we need to figure this fiddle-stick out.

I'm having the same issue on my Galaxy S4 Active with a locked bootloader. My IMEI got corrupted after an update. I'm trying to reflash the modem to fix the issue, but I can't get past the fail. Any solutions to this yet?

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Hi Buddys, I saw ur post and made an account to help u guys out. It can sound silly, but charge fully your battery and when its done, take it out for 5 minutes and re-odin it. Dont forget to uncheck to auto-reboot and hopefully it should be fine. No need for a beer , got enuff issues sober...

Pickpoket said:
I've looked everywhere, cannot find a solution even for other people who have asked in development threads.
I flashed a rom "Foxhound 3.2" and in the instructions it told me to flash a MJ8 Modem.
Downloaded the modem, and Odin 3.07. Stuck my phone in download mode via Power Menu. Unticked Auto-Reboot. Put the tar file in Phone. Hit Start.
This is what came up on Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> modem.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
This is what came up on my phone:
ODIN MODE
PRODUCT NAME : SGH-M919
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: ENABLED
START [224,440]
SECURE CHECK FAIL: (NDN OR MDM) < I cant read it no matter how much I squint at it.
Modem: http://www.androidfilehost.com/?fid=23212708291676083
Thread: http://forum.xda-developers.com/showthread.php?t=2303239
Page: 697 (I was following Janii's Post)
Build Number
JSS15.I9505XXUEMJ8
Baseband:
M919UVUAMDL
Kernel
3.4.68--KT-SGS4-JB4.4-TW-INTL-11.04.2013
Thank you in advance for all your help. Willing to buy a beer for the person that gets me out of this mess!
Click to expand...
Click to collapse
Had the same freakin issue yesterday guys, try this , tried to flash the albe rom. This link worked very fine for my m919
http://forum.xda-developers.com/galaxy-s4-tmobile/general/i9505oa7tw5-0leak-t3045729

[Q] Samsung I9505 LTE Help choosing correct modem (4.3 connection problems)

Hi
Recently I upgraded my S4 i9505 from 4.2.2 to 4.3. Earlier I used Wanam Lite custom rom and now Omega rom.
I faced problems with my phone:
- there is connection loss and problems with wifi (wifi connects and works but it says connection is unstable)
- there is connection loss and problems with 3g/4g (h/h+).
I wonder if I'm using correct modem. I tried searching this forum and google, but didn't manage the find the correct ones.
AP: I9505XXUEML6
CP: I9505XXUBMF5
CSC: I9505VFGEML1
I'm using Omega v19 - XXUEML6. Baseband I9505XXUBMF5
Could you please help me with this problem. Thanks!

neppinen said:
Hi
Recently I upgraded my S4 i9505 from 4.2.2 to 4.3. Earlier I used Wanam Lite custom rom and now Omega rom.
I faced problems with my phone:
- there is connection loss and problems with wifi (wifi connects and works but it says connection is unstable)
- there is connection loss and problems with 3g/4g (h/h+).
I wonder if I'm using correct modem. I tried searching this forum and google, but didn't manage the find the correct ones.
AP: I9505XXUEML6
CP: I9505XXUBMF5
CSC: I9505VFGEML1
I'm using Omega v19 - XXUEML6. Baseband I9505XXUBMF5
Could you please help me with this problem. Thanks!
Click to expand...
Click to collapse
Download and extract the file and Flash this Modem Via odin by selecting phone/cp "Remember to turn off your phone manually. and check your baseband version if it change. Have a nice day.

I downloaded the file, then I put phone in to the Download mode, started Odin. Unticked the "auto reboot" option, selected [v] Phone and file I9505_XXUEML6_MODEM.tar. Then pressed start.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
Odin said Pass 2:10 and then I restarted the phone.
*#1234# still says:
CP: i9505xxubmf5
What did I wrong?

neppinen said:
I downloaded the file, then I put phone in to the Download mode, started Odin. Unticked the "auto reboot" option, selected [v] Phone and file I9505_XXUEML6_MODEM.tar. Then pressed start.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> modem.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
Odin said Pass 2:10 and then I restarted the phone.
*#1234# still says:
CP: i9505xxubmf5
What did I wrong?
Click to expand...
Click to collapse
try this mate Make sure to turn off Manually your phone "Press power button and Power off" because it wont work if your doing Press power >Restart >Reboot option >Download !
Untick Autoreboot
Flash modem by slecting Phone/cp
Reboot once again into Download Mode using (Power+Vol Down button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.

I made this three times. For the 4th time I couldn't get to download mode, maybe I mispressed the buttons but, not sure...
Then I rebooted and checked *#1234# and THERE IT IS: XXUEML6!
I also tried to lock and unlock phone, and the H+ connection stays. I also tested with Signal Reset application which makes notification sound when there's signall loss.
Thank you Repulsa!

neppinen said:
I made this three times. For the 4th time I couldn't get to download mode, maybe I mispressed the buttons but, not sure...
Then I rebooted and checked *#1234# and THERE IT IS: XXUEML6!
I also tried to lock and unlock phone, and the H+ connection stays. I also tested with Signal Reset application which makes notification sound when there's signall loss.
Thank you Repulsa!
Click to expand...
Click to collapse
Glad that help's you mate if you got any more problem . Feel free to ask here anytime. Have a nice day.
Sent from Hell ?

This topic helped me also.
I had the same problem with the signal loss on several ROMs. When phone screen is on, I have HSDPA/HSDPA+ signal, but when screen goes off, and you turn in again - there's no signal anymore. I had to go to network settings to choose network again, and it works... ... till screen is on.
I temporally fixed problem when I turned on GSM signal only.
With this solution, I have permanently fixed my problem.
Thanks!

I have the official rom by Samsung based on Android 4.3:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ7
CSC: I9505ITVEMJ8
And I have the same issues about connection lost... Can I install a better modem without losing warranty? Or can I do something else to avoid this issue?
Thanks.
Tonyms
Inviato dal mio GT-I9505 utilizzando Tapatalk

[Q] cannot unroot with odin :(

good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

micphone7 said:
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk

1eyedmonster said:
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I just bought it from thailand !

micphone7 said:
I just bought it from thailand !
Click to expand...
Click to collapse
You wont be able to flash 4.3 if youre on 4.4.2
"If someone helps, never forget to hit thanks ? "

[Q] SOFT BRICK - Fail flashing Stock ROM at hidden.img ODIN

SOFT BRICK - Fail flashing Stock ROM at hidden.img ODIN
Guys hello.
I have rooted and successfully flashed custom recovery and custom firmwares on my Note 3 (9005 Qualcomm LTE), however the last flash (stock ROM 4.4.2 N9005XXUENB4) attempt with Odin (v 3) failed at the end of the flash process ( hidden.img.ext4 -> FAIL! (ext4)):
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now the phone wouldn't boot any more....
Than I try the pit file ........sorry the some situation......................................
Can somebody help or advise me?:crying::crying:
Cheers Shark001

This is possible coz the firmware you have installed (maybe you upgrade your bootloader flashing that custom roms) is newer that the one you are trying to flash.

Joku1981 said:
This is possible coz the firmware you have installed (maybe you upgrade your bootloader) is newer that the one you are trying to flash.
Click to expand...
Click to collapse
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?

Shark001 said:
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?
Click to expand...
Click to collapse
Ni4 is much newer....so flash a Ni4 room. ...

Shark001 said:
Thank you for your quick answer.......
I had this ROM [SM-N9005][XXUGNI4]_BoBCaTROM_EVO_v12 multi density........
Is there a way how I can solve it?
Click to expand...
Click to collapse
Are you using a branded device? Where is your device from? Do you know the CSC of your device?
Go to Sammobile.com and take a look the firmwares GNI4. Download and flash it. Done.

HI
My Phone was brandet by T-Mobile (Note3 is rooted) but I used a custom Rom the BobCat Rom and the reported Error happend during the tryed to reinstall the xxxGNI4 version from Sammobile.
Therefore I'm confused . Sorry I wrote the wrong version in my first post....

Shark001 said:
HI
My Phone was brandet by T-Mobile (Note3 is rooted) but I used a custom Rom the BobCat Rom and the reported Error happend during the tryed to reinstall the xxxGNI4 version from Sammobile.
Therefore I'm confused . Sorry I wrote the wrong version in my first post....
Click to expand...
Click to collapse
I found the CSC Version of the BObCatROm ............it is N9005AXXGNJ1
Cheers

Shark001 said:
I found the CSC Version of the BObCatROm ............it is N9005AXXGNJ1
Cheers
Click to expand...
Click to collapse
T-mobile of what country?

Downgrading Samsung Galaxy Edge from Oreo 8.0 to Nougat 7.0

Hi,
I'm looking for some help/confirmation in regards to down grading a Samsung Galaxy Edge 7.
Current phone details:
SM-G935F
Android version 8.0
Kernel version 3.18.91-13895453-QB20061915
Build Number: R16NW.G935FXXS3ERJ4
Android Security patch: 1/10/2018
Carrier: O2
Tried to Install:
Country / Region: United Kingdom (O2)
PDA: G935FXXU1DQL8
Product Code: O2U
CSC: G935FTEF1DQL8
Phone: G935FXXU1DQL8
Where i have got to so far:
1. Installed Samsung USB
2. Downloaded Odin v 3.13
3. Downloaded the firmware I want to downgrade to from updato.com
4. Gone into download mode and tried to use Odin with the firmware.
5. Hit an error
The error on the phone shows "sw rev check fail device 3 binary 1"
The error in Odin is:
Code:
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
After some searching and reading Is it a case that the bootloader is now updated so I cant downgrade back?
Thank you

The error in question is because of your updated bootloader. So there is no possibility to install from older stock odin roms. You can only do this through custom roms.