Trouble with custom recovery - Galaxy Note 3 Q&A, Help & Troubleshooting

Ok so I rooted my galaxy note 3 n9005 a few weeks ago with safe tap I think it was anyway I have been trying ever since to flash a custom recovery but with no luck I'm I have tried use odin to flash twrp and cwm but both get to the end and say failed I tried goomanager but if says your download is now starting and nothing ever shows up Have I missed something is there something else I was meant to do please help ??
Sent from my SM-N9005 using Tapatalk

BDG91 said:
Ok so I rooted my galaxy note 3 n9005 a few weeks ago with safe tap I think it was anyway I have been trying ever since to flash a custom recovery but with no luck I'm I have tried use odin to flash twrp and cwm but both get to the end and say failed I tried goomanager but if says your download is now starting and nothing ever shows up Have I missed something is there something else I was meant to do please help ??
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Don't know if it makes any difference but normally you put on custom recovery first then root can't see it makes any difference but maybe the reason
---------- Post added at 12:36 PM ---------- Previous post was at 12:14 PM ----------
BDG91 said:
Ok so I rooted my galaxy note 3 n9005 a few weeks ago with safe tap I think it was anyway I have been trying ever since to flash a custom recovery but with no luck I'm I have tried use odin to flash twrp and cwm but both get to the end and say failed I tried goomanager but if says your download is now starting and nothing ever shows up Have I missed something is there something else I was meant to do please help ??
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Just had a thought is the way you rooted knox safe if it is you will trip knox with a custom recovery

Related

Have custom recovery, but can't gain root. Do I even need root to flash CM?

I've been trying to hold off on rooting my new GS4, but after a few weeks, the bug finally bit me. I got the custom recovery installed, and I installed SuperSU from withing the recovery, but due to some update errors when I rebooted, I never have gained root with the factory ROM. To be honest though, I don't care if I have root in the factory ROM, I just want to wipe the facory ROM and get CM onto my new device. Since I have a custom recovery, can I just say **** it and wipe and install the latest CM nightly, or is it absolutely imperative that I gain root in the factory ROM before I wipe and install a custom ROM?
garfnodie said:
I've been trying to hold off on rooting my new GS4, but after a few weeks, the bug finally bit me. I got the custom recovery installed, and I installed SuperSU from withing the recovery, but due to some update errors when I rebooted, I never have gained root with the factory ROM. To be honest though, I don't care if I have root in the factory ROM, I just want to wipe the facory ROM and get CM onto my new device. Since I have a custom recovery, can I just say **** it and wipe and install the latest CM nightly, or is it absolutely imperative that I gain root in the factory ROM before I wipe and install a custom ROM?
Click to expand...
Click to collapse
What are you on 4.2.2 or 4.3?
Sent from my SPH-L720 using Tapatalk
galaxys3man30 said:
What are you on 4.2.2 or 4.3?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
4.2.2
garfnodie said:
4.2.2
Click to expand...
Click to collapse
I'm assuming ur on MF9 OK now you should have rooted first before recovery you can follow the video from www.qbking77.com on how to root MF9 but to answer your question I think you have to be rooted to flash any rom but it don't make sense you can't flash a recovery without being rooted it's weird that you have custom recovery and not rooted do you have super user app on ur phone?
Sent from my SPH-L720 using Tapatalk
galaxys3man30 said:
I'm assuming ur on MF9 OK now you should have rooted first before recovery you can follow the video from www.qbking77.com on how to root MF9 but to answer your question I think you have to be rooted to flash any rom but it don't make sense you can't flash a recovery without being rooted it's weird that you have custom recovery and not rooted do you have super user app on ur phone?
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Maybe it'd be more accurate to say that I can't get SuperSU working. I used Odin to flash a custom recovery, booted into custom recovery, flashed SuperSU, rebooted, but instead of launching SuperSU first, I updated SuperSU through Google Play. I then ran SuperSU and it couldn't install the binaries, realizing that I probably shouldn't have updated SuperSU before running it first, I uninstalled the update, then ran SuperSU, but it still cannot install the needed binaries, and since I was never able to get SuperSU working properly in the first place, I cannot gain access to /system to remove the SuperSU apk and try again. So I'm hoping that since I don't even care about TouchWIZ, I just want to get CM up and running, I can just boot into recovery, wipe everything and then flash CM.
I don't think you can do that without bonking ur phone need to get and cf root so it will install the root binaries on ur phone SuperSU will work without ur running cf root it will not work that's why ur getting the error can't install binaries that's cuz ur not rooted
Sent from my SPH-L720 using Tapatalk
---------- Post added at 02:17 AM ---------- Previous post was at 02:16 AM ----------
http://forum.xda-developers.com/showthread.php?p=41743595
Sent from my SPH-L720 using Tapatalk
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
Go there and Odin that and then you will be rooted and u can in the binaries then buddy you don't have to open the app and update it can update from play store just fine
Sent from my SPH-L720 using Tapatalk
galaxys3man30 said:
I don't think you can do that without bonking ur phone need to get and cf root so it will install the root binaries on ur phone SuperSU will work without ur running cf root it will not work that's why ur getting the error can't install binaries that's cuz ur not rooted
Sent from my SPH-L720 using Tapatalk
---------- Post added at 02:17 AM ---------- Previous post was at 02:16 AM ----------
http://forum.xda-developers.com/showthread.php?p=41743595
Sent from my SPH-L720 using Tapatalk
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
Go there and Odin that and then you will be rooted and u can in the binaries then buddy you don't have to open the app and update it can update from play store just fine
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Ok, thanks. I'll give that a shot. Is it going to cause a problem though that I've already flashed SuperSU, or will CF-Auto-Root just overwrite.
And on an unrelated topic, I've seen multiple times now while researching rooting the GS4 people saying to make a special backup of the efs folder to backup your IMEI info. I've rooted many devices now (Nexus One, Epic 4G Touch, Captivate, One X, original Galaxy Tab for Sprint) and I've never seen mention of making a special backup of the efs folder. Is this something new for LTE devices or what?
garfnodie said:
Ok, thanks. I'll give that a shot. Is it going to cause a problem though that I've already flashed SuperSU, or will CF-Auto-Root just overwrite.
And on an unrelated topic, I've seen multiple times now while researching rooting the GS4 people saying to make a special backup of the efs folder to backup your IMEI info. I've rooted many devices now (Nexus One, Epic 4G Touch, Captivate, One X, original Galaxy Tab for Sprint) and I've never seen mention of making a special backup of the efs folder. Is this something new for LTE devices or what?
Click to expand...
Click to collapse
Yea it will override the SuperSU u have and yes I seen people talk about it before it's just incase you might lose your imei number but it's rare just a safe back up
Sent from my SPH-L720 using Tapatalk
galaxys3man30 said:
Yea it will override the SuperSU u have and yes I seen people talk about it before it's just incase you might lose your imei number but it's rare just a safe back up
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Awesome, that worked like a charm, but since that uses a stock recovery, I now need to get a custom recovery back onto the device, and that's easy. However, I remember when I first got my Epic 4G Touch, if I wanted to flash a custom ROM, I had to first extract the kernel out of the ROM, flash the ROM, then flash the kernel, then reboot. Eventually this was fixed so all you had to do what just flash the ROM and reboot and you were good to go. Will I need to flash the kernel separately with this phone as well?
garfnodie said:
Awesome, that worked like a charm, but since that uses a stock recovery, I now need to get a custom recovery back onto the device, and that's easy. However, I remember when I first got my Epic 4G Touch, if I wanted to flash a custom ROM, I had to first extract the kernel out of the ROM, flash the ROM, then flash the kernel, then reboot. Eventually this was fixed so all you had to do what just flash the ROM and reboot and you were good to go. Will I need to flash the kernel separately with this phone as well?
Click to expand...
Click to collapse
No not that I know of buddy I always flash them all in the same package buddy never had to separate the kernel to flash anything so you should good flashing everything all in the same package but I'm sure whatever rom you run they will it op if you have to do that buddy

Trying to install TWRP recovery...help please.

So I rooted the s4 with kingo root and everything went great. I then installed goo manager and installed twrp recovery...or so I thought. I then tried to reboot into recovery to flash the pac rom but my ohone rebooted into download mode stating that it couldnt boot into normal mode. Now ive officially rebooted into normal mode but how do I boot into recovery mode and not have that error again? I know this has prolly been asked before but im on my phone and its hard to navigate through thousands ofnpost to find the right answer.
Thanks in advance!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I recommend reading
"General Section" and then search "Safestrap"
Sent from my Nexus 5 using Tapatalk
jball said:
I recommend reading
"General Section" and then search "Safestrap"
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
+1 and make sure you know what firmware you're on
what happened is you upgraded your bootloader to one that is "locked" and you can't go back. now you have to use safestrap recovery instead of TWRP. i did the same thing it sucks because now we can't use custom kernels.
khakiman said:
what happened is you upgraded your bootloader to one that is "locked" and you can't go back. now you have to use safestrap recovery instead of TWRP. i did the same thing it sucks because now we can't use custom kernels.
Click to expand...
Click to collapse
Can we not install custom roms? It keeps rebooting or taking me to download mode.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
jrodbrown58 said:
Can we not install custom roms? It keeps rebooting or taking me to download mode.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Not if you're on mf3 firmware or newer. Do you know what firmware you're on?
im going to help you out because i went through this the other night:
first you need to do this to get out of download mode.
get odin3 for your pc and connect your phone while in download mode. if you haven't already get the http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows and install them.
next download this
http://www.androidfilehost.com/?fid=23321874045862958
this is 4 files you will put into odin to get you back to stock everything. this is 4.3 not 4.4.2 because i assume you want to have a rooted phone with a custom recovery and there is no way to root 4.4.2 yet or put a custom recovery on.
so when you unrar the file add the 4 files to ODIN and flash
NEXT: you should be in stock mode now. enable developer mode by going into settings about device and clicking build 7 times. enable usb debugging in developer mode.
now you can root. download http://forum.xda-developers.com/attachment.php?attachmentid=2559636&d=1391563147 , extract to a folder. connect your phone to your pc with usb and run install.bat. go through the process. now you are rooted.
next you can install safestrap recovery mode (looks just like TWRP just you cant install custom kernels.... and only some custom roms, sucks i know)
http://goo.im/devs/Hashcode/jflteatt/safestrap/Safestrap-JFLTEATT-3.71.apk just run that and install recovery from the app.
so now you have your 4.3 phone with stock rom rooted and a custom recovery. IF YOU DARE try and flash a rom. go here for more info on that. scroll down to the part that says ROMS OVERVIEW
forum.xda-developers.com/showthread.php?t=2616221
i tried and ended up stuck in download mode again so i gave up and am chilling in stock 4.3 with root and custom recovery at least for now until i have some free time to try another rom.
THE END. hope i help some people with this
jd1639 said:
Not if you're on mf3 firmware or newer. Do you know what firmware you're on?
Click to expand...
Click to collapse
Mf3. Fml I got this phone bc I thought I can put pacrom on it
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I may just trade my phone back to get the note 2
Sent from my SAMSUNG-SGH-I337 using Tapatalk
jrodbrown58 said:
Mf3. Fml I got this phone bc I thought I can put pacrom on it
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Sorry no Pacman, only tw based roms.
---------- Post added at 09:06 PM ---------- Previous post was at 09:00 PM ----------
kahkiman, Would have been easier to link him to the all in one tar
jd1639 said:
Sorry no Pacman, only tw based roms.
---------- Post added at 09:06 PM ---------- Previous post was at 09:00 PM ----------
kahkiman, Would have been easier to link him to the all in one tar
Click to expand...
Click to collapse
i wasnt sure how the all in one tar works.... you just put it on pda?
khakiman said:
i wasnt sure how the all in one tar works.... you just put it on pda?
Click to expand...
Click to collapse
Yep

[Q] Rooting a Note 3 with failure

Hi, im trying to root my note 3 (SM-N9005) but im having troubles.
ive got the right Chainfire files and im following this guide: http://forum.xda-developers.com/showthread.php?t=2466423
But my phone doesnt seem to finish or start for that matter the rooting process, i just get stuck at the part when the phone should just boot into recovery mode and the screen just has the note 3 logo and up in the left corner it sais:
Recovery Booting...
Recovery is not seandroid enforcing
Set Warranty Bit : recovery
nothing else.
im posting here cause i dont have permission to post into the other thread.
anyone have ideas ? :cyclops:
Are you sure you have the right files ? For the n9005 ? (If that is your phone)
Are you on 4.3 or 4.4.2 ?
Sent from my N9005
Dejan Sathanas said:
Are you sure you have the right files ? For the n9005 ? (If that is your phone)
Are you on 4.3 or 4.4.2 ?
Sent from my N9005
Click to expand...
Click to collapse
CF-Auto-Root-hlte-hltexx-smn9005.zip
odin3-1.85.zip
pretty much the only files i need for now, im on 4.3 SM-N9005
Did you read the note on the second post of the cf root thread and did so ?
Sent from my N9005
Dejan Sathanas said:
Did you read the note on the second post of the cf root thread and did so ?
Sent from my N9005
Click to expand...
Click to collapse
NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.
this? yes i tried it but it still does not boot into recovery, doesnt even boot loop just gets stuck in the screen i mentioned earlier
Now if i boot into download mode this is my screen
http ://i.imgur. com/SPO8jHF.jpg
Write protection: Enable ... is that something that can be a reason for this? :silly:
And what does Odin say ? If it says pass, you should do the "pull out battery and manually boot into recovery" and it should work. I still think you have the wrong file, maybe for 4.4.2 ? Maybe a bad download, try again.
Sent from my N9005
Dejan Sathanas said:
And what does Odin say ? If it says pass, you should do the "pull out battery and manually boot into recovery" and it should work. I still think you have the wrong file, maybe for 4.4.2 ? Maybe a bad download, try again.
Sent from my N9005
Click to expand...
Click to collapse
dear god im so ashamed, im using a 4.4.2 :highfive:
:sly:
Sent from my N9005
Tell me, can I flash xnote rom with cf root?
Sent from my SM-N9005 using xda app-developers app
Lol, 4.3 or 4.4.2 ?
You could, but you'll need a custom recovery. But more I won't tell you. Spoon feeding is bad. :banghead:
And the fact, that you didn't see the link for the 4.3 file, wich was posted in the same sentence as the 4.4 link, I think you should really do some reading.
Every rom has its installation instructions written in the thread.
Sent from my N9005
Yes sorry about that. I just need guidance I can't find a recovery via Cwm for instance and the x note thread doesn't seem to have an install guide , I just want a kit kat based rom for my note and the last time I flashed a recovery+rom it was a galaxy gio and that was done via sd card and 2 zip files hehe
Sent from my SM-N9005 using xda app-developers app
See, that's why I hate this. How can you say it doesn't have a guide on how to install it, if it clearly does. My first custom rom, coming from 4.3 to 4.4 was xnote. And guess what, i flashed it with the help of the instructions posted on the site, and a bit of Google search too. Why do i even bother, I'm over and out. Maybe someone else will spoon feed you.
Sent from my N9005
Aegirj said:
Hi, im trying to root my note 3 (SM-N9005) but im having troubles.
ive got the right Chainfire files and im following this guide
But my phone doesnt seem to finish or start for that matter the rooting process, i just get stuck at the part when the phone should just boot into recovery mode and the screen just has the note 3 logo and up in the left corner it sais:
Recovery Booting...
Recovery is not seandroid enforcing
Set Warranty Bit : recovery
nothing else.
im posting here cause i dont have permission to post into the other thread.
anyone have ideas ? :cyclops:
Click to expand...
Click to collapse
Hi! Check out this Galaxy Note 3 rooting guide in order to overcome the rooting problem in the best possible manner. It offers best step by step guideline:
http://blog.brokenlcds.com/root-samsung-galaxy-note-3/
Dejan Sathanas said:
See, that's why I hate this. How can you say it doesn't have a guide on how to install it, if it clearly does. My first custom rom, coming from 4.3 to 4.4 was xnote. And guess what, i flashed it with the help of the instructions posted on the site, and a bit of Google search too. Why do i even bother, I'm over and out. Maybe someone else will spoon feed you.
Sent from my N9005
Click to expand...
Click to collapse
Thanks for your help though, you helped me through it with the cf root, now im flashed cwm and am running carbon nightlies

[Q] I'm rooted...now what?

So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
If you need to ask these questions you should not have rooted. Look in the general forum.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you need to ask these questions you should not have rooted. Look in the general forum.
Click to expand...
Click to collapse
I freely admit that I'm new to this, so no reason to point that out. There are other reasons to root besides flashing custom ROMs, and I don't see any reason why I shouldn't have rooted. Every time I look through threads for my build, people just say that it can't be rooted (which is obviously no longer the case, since I'm successfully rooted). I just want to know what kind of capabilities I should look into, and as I understand it, the best way to do that and start tinkering is by using Safestrap.
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running 4.4.2, Kernel 3.4.0-1125940.
go4bacon said:
I'm running 4.4.2, Kernel 3.4.0-1125940.
Click to expand...
Click to collapse
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's I337UCUFNC1.
go4bacon said:
I think it's I337UCUFNC1.
Click to expand...
Click to collapse
You're on nc1 firmware. Look for this http://forum.xda-developers.com/showthread.php?p=51067706
Sent from my Nexus 5 using XDA Free mobile app
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Make sure you read read read.
After flashing a rom such as Goldeneye inrecovery dont reboot system go back to the home and flash the proper kernel modules and super user.zip. If on golden eye..As far as i know you cannot flash custom kernels
spirodave said:
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Click to expand...
Click to collapse
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
go4bacon said:
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
Click to expand...
Click to collapse
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
Click to expand...
Click to collapse
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
Click to expand...
Click to collapse
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
dude52 said:
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
Click to expand...
Click to collapse
Thought NC1 was 4.4.kklmao on this end now
But good to know ..So SElinux mode changer will fix the safestrap issue on NC1 ?. could have saved me a whole night .. I have been cramming all this info in in one week bieng i just bought this device .. Gues that is what happens reading outdated threads.. Coming from a tmobile gs2 flashing world to this BS locked boot loader has been an experience .. What next your gonna tell me i can install a custom kernel to over clock with this Bl. Can I? lol..No but im serious
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
SELinux Mode Changer fixes SafeStrap for NC1
Guedeaux said:
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
Click to expand...
Click to collapse
Works fine. Just finally rooted my S4 and TWRP backed up without having to wipe/reload/restore anything at all.
TowelRoot + Safestrap-JFLTE-3.72-kk-B01.apk + ModeChanger = easy peasy Root & Restore

[Q&A] US Cellular Galaxy S5 [SM-G900R4]

Q&A for US Cellular Galaxy S5 [SM-G900R4]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for US Cellular Galaxy S5 [SM-G900R4]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
stuck at android boot screen Samsung Galaxy S5 SM-G900R4 (US Cellular)
hey folks
Successfully rooted My Samsung Galaxy S5 SM-G900R4 (US Cellular) with CF-Auto-Root then i messed that up installing a rom that probably wasnt compatable with my device. so I went to install the stock firmware. and that didnt work odin said fail and im stuck with my phone's not working. its stuck on android boot screen. and wont do anything else.
Root
Does any one happen to know what roots are available for g900r4 on 5.0?
zaduro said:
hey folks
Successfully rooted My Samsung Galaxy S5 SM-G900R4 (US Cellular) with CF-Auto-Root then i messed that up installing a rom that probably wasnt compatable with my device. so I went to install the stock firmware. and that didnt work odin said fail and im stuck with my phone's not working. its stuck on android boot screen. and wont do anything else.
Click to expand...
Click to collapse
Did you back anything up in your custom recovery? Even if you didnt check backups in recovery or factory reset. Did you wipe cache, dalvik, and everything for the rom, did you dirty flash?
Sent from my SM-G900R4 using Tapatalk
---------- Post added at 04:32 PM ---------- Previous post was at 04:27 PM ----------
Jasonhtb said:
Does any one happen to know what roots are available for g900r4 on 5.0?
Click to expand...
Click to collapse
Yes, I just updated to stock LP 5.0 via odin and then rooted and flashed custom recovery. I used the CF-auto-root (for G900R4) method on odin and flashed Philz 6.26.2 for custom recovery. Make sure under settings/security you have the "Reactivation Lock" box-unchecked.
Sent from my SM-G900R4 using Tapatalk
Is cf auto root safe... I've seen people use it and they get stuck at the end part where its on the red Android logo
---------- Post added at 07:30 AM ---------- Previous post was at 07:26 AM ----------
If I flash the cf auto root file do I have to flash the recovery I just want root to remove bloatware and use greenify
Samuel.v said:
Is cf auto root safe... I've seen people use it and they get stuck at the end part where its on the red Android logo
---------- Post added at 07:30 AM ---------- Previous post was at 07:26 AM ----------
If I flash the cf auto root file do I have to flash the recovery I just want root to remove bloatware and use greenify
Click to expand...
Click to collapse
It is safe and will root your phone with out issue. Of course you could always just go with the standard "flash recovery in Odin and flash Supersu in recovery". Simple.
Sent from my SM-G900R4 using Tapatalk
Thanks I will try cf auto root , I hope it'll work with android lollipop
How would I go back to the stock lollipop ROM... I'm really confused my baseband version is BOG2 and I'm currently on ressurecion ROM remix... The problem is I don't have a CSC or PDA version number... Do I just flash the BOG2 version please help
Samuel.v said:
How would I go back to the stock lollipop ROM... I'm really confused my baseband version is BOG2 and I'm currently on ressurecion ROM remix... The problem is I don't have a CSC or PDA version number... Do I just flash the BOG2 version please help
Click to expand...
Click to collapse
Download the latest firmware for our devise. It is a tar.md5 file. Open Odin. Connect your phone. Place the .tar.md5 file in the PDA section. Click start. Done.
Assuming you have Odin and drivers installed correctly.
Sent from my SM-G900R4 using Tapatalk
I'll give it a try thanks which version of Odin should I use
Edit 2: Never mind I put a lot of thought into this I might just stay on my custom ROM.... This is the only phone I have for 14 months then I will maybe get a new one, I really don't want to screw this up, I'll be stuck with a flip phone for 14 months
Samuel.v said:
I'll give it a try thanks which version of Odin should I use
3.10
Sent from my SM-G900R4 using Tapatalk
Click to expand...
Click to collapse
I download the latest one right BOG2 ???
I'm very concerned about doing this because I read in another thread, same issue that happended to my phone it ended up getting stuck on the us cellular 4g LTE screen and wouldn't do anything... After the guy flashed the stock ROM the phone was still stuck on the same screen after clearing the cache and factory resetting. I don't want this happening to my phone
Samuel.v said:
I download the latest one right BOG2 ???
I'm very concerned about doing this because I read in another thread, same issue that happended to my phone it ended up getting stuck on the us cellular 4g LTE screen and wouldn't do anything... After the guy flashed the stock ROM the phone was still stuck on the same screen after clearing the cache and factory resetting. I don't want this happening to my phone
Click to expand...
Click to collapse
Unless you flash firmware that is not compatible with our devised and you're using the latest firmware for our devise, along with the correct version of Odin, you will have no issues.
Sent from my SM-G900R4 using Tapatalk
Honestly don't know if I want to go back to stock now found a really stable custom ROM
I was recently given this phone, on it Anroid 5.0
im finding its both a good an bad thing lol.
Are the us cellular links for 5.0 android correct?
Samsung doesn't have an unlocker but seemed to have the rest
Im a newb but from what i noticed upon writing all my phone info down, and correct me if im wrong but it looks to be that if you know your boot loader snd region of world the phone is from you can figure out that Your PdA is exactly the same az your bootloader and
The CSC is identical to pda EXCEPT for the 3 letters after G900R4 _ _ _
Those are your Country of origin or region
I lost my root. Tried using Mobile Odin and checked the everroot. But apparently it did not work. My problem is I want to go back to 4.4.2 stock firmware and I do not have a pc or mac at the moment. Can I use the stock 5.0 recovery to flash back to 4.4.2?
Mine may not be 100% on the authentic side. I just learned that the person who gave it to me got it from a rep at a t-mobile store because an anon customer had left it at the store stating that it had been reported stolen.. and it needs to be unlocked from Us Cellular
Sent from my SM-G900R4 using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
I have a few discrepancies with
A couple number strings or the lack of their prescence
Sent from my SM-G900R4 using Tapatalk
Great Post
Hello,
Id like to give a big thank you to all the developers/contributors that put together the rooting instructions in the developer section
A few days ago i successfully rooted my smg900r4!
it was very simple, and quick process using the instructions in the developer thread.
Using cf auto, super su, and odin. And Kies as backup
I will notate i had a little hiccup in the process.
It was a file type conflict regarding the samsung usb driver download zip being set to open in windows 8 and the desktop i used that was running windows 10.
Once i realized what the issue was a coulple setting adjustmemts later and i was done!
And as stated its rock solid stable
I am on stock rom etc.
I have installed the following apps and granted root access to them
- Apps2Sd (this is a very excellent multi function application !
- Busybox on rails
- App Manager iii (i had this installed prior to rooting the device.)
- Wifi Connection Manager
Couple questions;
Since ive installed the multi function Apps2SD application, is it redundant to keep app manager iii installed?
Are the hidden menus and settings only accessible by using the shortcut app found in playstore?
smg900r4 on tapatalk

Resources