Guys,
I have a problem, i went from KK to PSX 4.3
Now Wifi doesn't work.
What should I do?
Thnx
Desaf said:
Guys,
I have a problem, i went from KK to PSX 4.3
Now Wifi doesn't work.
What should I do?
Thnx
Click to expand...
Click to collapse
Did you do a full-wipe? If not, that's where I would start. If you did a full wipe, I would then clear cache. Also,could be a bad flash or download.
npiper05 said:
Did you do a full-wipe? If not, that's where I would start. If you did a full wipe, I would then clear cache. Also,could be a bad flash or download.
Click to expand...
Click to collapse
I already did several clean wipes, I tried different 4.3 roms, but none of them has working Wifi.
Desaf said:
I already did several clean wipes, I tried different 4.3 roms, but none of them has working Wifi.
Click to expand...
Click to collapse
Were you using official KitKat? Maybe you'll have to flash 4.3 factory images. Just don't flash user data or recovery. You can boot to TWRP and wipe. Them you don't lose everything on your phone.
Did you make a backup?
Sent from my Nexus 4 using XDA Premium 4 mobile app
npiper05 said:
Were you using official KitKat? Maybe you'll have to flash 4.3 factory images. Just don't flash user data or recovery. You can boot to TWRP and wipe. Them you don't lose everything on your phone.
Did you make a backup?
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I was on official fact. image KK. I am now trying to flash 4.3 stock and unroot. Then root again. Maybe that helps.
KK radio/boot doesn't play nice with 4.3. I think you could've flashed an older radio and go 4.3.
pike2hc said:
KK radio/bootloader doesn't play nice with 4.3. I think you could've flashed an older radio and go 4.3.
Click to expand...
Click to collapse
where can i find the older radio?
edit: is this the radio thread? http://forum.xda-developers.com/showthread.php?t=2087227
Yes. The .84 or earlier are fine for 4.3. I use a hybrid to enable LTE for T-mobile US.
Related
Hi,
I have stock rom 4.2.2 on my tilapia.
Few day ago I've made root access.
I'm testing some kernels. but now, I lost my 3G connection permanently.
There were a moment, when I had a connection (poor, but have sometimes) for example on M-kernel, or a44.
I've installed franco for testing now. but I've lost my 3G connection.
(I think it's not so important)
Main question:
I have stock 4.2.2 and kernel a38 by Mettalice. Can I flash only "tilapia-radio.img" from oryginal/stock rom in recovery ?
Yes you can flash only the kernel img. But wipe cache and dalvik cache after.
Sent from my Nexus 7 using Tapatalk 2
Mockingbird said:
Yes you can flash only the kernel img. But wipe cache and dalvik cache after.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
No, no.
I've already flashed anotker kernel with stock 4.2.2
but I've lost my 3g connection and now, I want to flash ONLY tilapia-radio.img from original rom.
Can I do it ?
tomektomekr said:
No, no.
I've already flashed anotker kernel with stock 4.2.2
but I've lost my 3g connection and now, I want to flash ONLY tilapia-radio.img from original rom.
Can I do it ?
Click to expand...
Click to collapse
Yes, you can use fastboot to flash it in thru the bootloader. My guess is simply the kernel or ROM you are on does not support the 3g version of the n7. I believe you even said you flashed a new kernel that killed your radio. Just a thought. You would have to actively try to delete your radio, which I doubt you did.
Sent from my Nexus 7 using Tapatalk 2
Okay I have Nexus 4 Rooted with Franko Kernel
Will I get the updated form google
If not I how can I flash it
Are you on stock ROM? Even if you do flashing will fail you need everything stock except recovery I had twrp on the last ota and flashed it just fine
Sent from my Nexus 4 using xda app-developers app
otariq said:
Are you on stock ROM? Even if you do flashing will fail you need everything stock except recovery I had twrp on the last ota and flashed it just fine
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Not everything is 4.2 Stock I'm using Frank- kernel not the Stock one
don't have the stock one anyone more
also I am updated Sound to beats Auto Mod
Checked the boot Video to a Custom one .
Okay FIxed using N-Cry tool kit it will wipe everything so back up before hand
seriously? flashing stock 4.3 over stock 4.2.2 but with some mods will not work?
I understood it was possible but flashing instead doing OTA. is it true?
This is one of the reasons why I stay unrooted as I get OTA updates without hassle and without losing any data. No need to flash or backup anything.
No risk of bricking the phone.
Wutang200 said:
This is one of the reasons why I stay unrooted as I get OTA updates without hassle and without losing any data. No need to flash or backup anything.
No risk of bricking the phone.
Click to expand...
Click to collapse
No fun neither
gee2012 said:
No fun neither
Click to expand...
Click to collapse
LOL.. :silly::silly::silly::silly::silly:
I used safestrap recovery to install the google play edition of the 4.3 on my GS4 with the MF3 firmware. It wont boot now, even if i go back to stock in the option. Any ideas, I am totaly new to this.
You can only boot 4.2.2 Roms two based.
Sent from my SGH-I337 using xda app-developers app
[email protected] said:
You can only boot 4.2.2 Roms two based.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I have wiped every rom from the phone other than stock and it still wont boot. I can get access to Odin is there a way to wipe it from there and return it to factory?
Psdwizard said:
I used safestrap recovery to install the google play edition of the 4.3 on my GS4 with the MF3 firmware. It wont boot now, even if i go back to stock in the option. Any ideas, I am totaly new to this.
Click to expand...
Click to collapse
besides safestrap not supporting 4.3 roms, are you postitive you didn't flash anything on your stock rom? if you did and you can't boot the only option to returning your phone back to stock is taking it to best buy to samsung experience and having them reflash your phone
I am off to there tonight.
Psdwizard said:
I am off to there tonight.
Click to expand...
Click to collapse
good luck :good:
seassol july
deadenz said:
good luck :good:
Click to expand...
Click to collapse
what rom do you use, and did safestrap work for you?
Psdwizard said:
what rom do you use, and did safestrap work for you?
Click to expand...
Click to collapse
I'm using VirginROM now. safestrap works great but you really have to read the directions carefully.
ya it was probably not smart do it with a screaming 4 year old in the room.
Psdwizard said:
ya it was probably not smart do it with a screaming 4 year old in the room.
Click to expand...
Click to collapse
lol definitely not
I flashed a Kit Kat rom, and before I was having problems with recovery. Now I'm having problems flashing a new ROM. Every time I try to flash a different rom, it says it flashes but it just goes back to the 4.4 rom I flashed first. I can restore a backup just fine, but even from the backup it does the same thing.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
I flashed a Kit Kat rom, and before I was having problems with recovery. Now I'm having problems flashing a new ROM. Every time I try to flash a different rom, it says it flashes but it just goes back to the 4.4 rom I flashed first. I can restore a backup just fine, but even from the backup it does the same thing.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
My MAC address keeps changing after reboot, and wifi is screwy no matter what I do. Full Wipe, factory reset, Factory image restore. Its seems the 4.4 roms change things that cant be undone. I now have to have my phone replaced.
Gah. I'd rather not have to have my phone replaced. I feel as if its just 4.4 ROMs though.
Sent from my Nexus 4 using Tapatalk
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Try reflasing your recovery. If that doesn't work, then flash the 4.3 factory images.
EggosEvo said:
Bump. I need this fixed.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I had 4.4 ported from n5, and then i flashed a 4.3 custom rom and didn't have any problems...
What custom recovery are u using ?
sergiu9my said:
I had 4.4 ported from n5, and then i flashed a 4.3 custom rom and didn't have any problems...
What custom recovery are u using ?
Click to expand...
Click to collapse
I'm on the latest CWM touch, I believe 6.0.4.3. I haven't actually tried going from the 4.4 rom to a 4.3, but I know I can't go from 4.4 to a different 4.4 rom, or from 4.3 rom to a different 4.4 rom, it just goes to the first one I flashed.
EggosEvo said:
I'm on the latest CWM touch, I believe 6.0.4.3. I haven't actually tried going from the 4.4 rom to a 4.3, but I know I can't go from 4.4 to a different 4.4 rom, or from 4.3 rom to a different 4.4 rom, it just goes to the first one I flashed.
Click to expand...
Click to collapse
Try using the latest twrp.
sergiu9my said:
Try using the latest twrp.
Click to expand...
Click to collapse
Haven't there been people having issues flashing 4.4 with TWRP? Or has Team Win updated it since then?
EggosEvo said:
Haven't there been people having issues flashing 4.4 with TWRP? Or has Team Win updated it since then?
Click to expand...
Click to collapse
Yes it's updated.
http://forum.xda-developers.com/showthread.php?t=2002326
sergiu9my said:
Yes it's updated.
http://forum.xda-developers.com/showthread.php?t=2002326
Click to expand...
Click to collapse
GooManager is telling me that there is no recovery available for my device. That's odd.
If all else fails, download the stock 4.3 image and fastboot flash it, then try whatever other ROM you wanted.
EggosEvo said:
GooManager is telling me that there is no recovery available for my device. That's odd.
Click to expand...
Click to collapse
Here is the flashable zip: https://www.dropbox.com/s/n8li9hq74weq8t6/TWRP-2.6.3.2-mako_flashable.zip
Flash it in recovery and then twrp will be ure default recovery.
Then try to flash a 4.3 rom.
sergiu9my said:
Here is the flashable zip: https://www.dropbox.com/s/n8li9hq74weq8t6/TWRP-2.6.3.2-mako_flashable.zip
Flash it in recovery and then twrp will be ure default recovery.
Then try to flash a 4.3 rom.
Click to expand...
Click to collapse
Successfully flashed PAC with TWRP. Tested PA 4.4, and still flashed the first 4.4 rom i flashed.
EggosEvo said:
Successfully flashed PAC with TWRP. Tested PA 4.4, and still flashed the first 4.4 rom i flashed.
Click to expand...
Click to collapse
Try doing what I suggested if you're still having the revert to original 4.4 issue.
orangekid said:
Try doing what I suggested if you're still having the revert to original 4.4 issue.
Click to expand...
Click to collapse
I won't have access to a computer with ADB until late tonight. But I'll try that and report back either tonight or tomorrow.
Sent from my Nexus 4 using xda app-developers app
EggosEvo said:
I won't have access to a computer with ADB until late tonight. But I'll try that and report back either tonight or tomorrow.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
The only other thing you might try now is flashing any 4.3 or 4.2.2 ROM, reboot, and see if it's now on that one or still on 4.4...
Or is that what you already did with PAC?
You can also manually format /system then /data from TWRP or CWM then manually flash your new ROM.
orangekid said:
The only other thing you might try now is flashing any 4.3 or 4.2.2 ROM, reboot, and see if it's now on that one or still on 4.4...
Or is that what you already did with PAC?
You can also manually format /system then /data from TWRP or CWM then manually flash your new ROM.
Click to expand...
Click to collapse
That's what I did. I went from 4.4 to PAC, and it booted into PAC. Same with CM 10.2. It seems to just be happening with 4.4 roms.
EggosEvo said:
That's what I did. I went from 4.4 to PAC, and it booted into PAC. Same with CM 10.2. It seems to just be happening with 4.4 roms.
Click to expand...
Click to collapse
just manual format /system /data and /boot is the only thing I can think of besides what I've already mentioned.
weird issue...
orangekid said:
just manual format /system /data and /boot is the only thing I can think of besides what I've already mentioned.
weird issue...
Click to expand...
Click to collapse
I just wiped /system and /data, and now the 4.4 PA fails to flash, but CM 10.2 flashed. I'm gonna switch to CWM to see if it'll flash there.
UPDATE: CWM would NOT let me go back to the previous option when asking me to reflash recovery when booting, and it didn't flash PA, so now I'm stuck on the first 4.4 build with no GApps until 9 or 10 tonight. First thing I'm doing when I get home is flashing the factory image.
I just received the OTA update of 4.4.2 so I wanted to know what exactly I have to do to update without any errors. I'm Rooted on Stock 4.4 with unlocked Bootloader and Custom Recovery TWRP and also I have the LTE hack enabled. Do I just fastboot flash stock recovery and let it update through OTA or do I have to push the original build.prop from 4.4 too because of the LTE hack? I really don't want to factory reset because I had to do that before in order to update from 4.3 to 4.4. Thanks in advance guys.
Sent from my Nexus 4 using xda app-developers app
With LTE back the update with adb sideload didn't work, i don't know if it is the dame with ota updates
danyf90 said:
With LTE back the update with adb sideload didn't work, i don't know if it is the dame with ota updates
Click to expand...
Click to collapse
Yeah I tried both before when updating to 4.4 and kept getting errors.
Sent from my Nexus 4 using xda app-developers app
_Kyros_ said:
Yeah I tried both before when updating to 4.4 and kept getting errors.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I literally just flashed from 4.4 to 4.4.2 by flashing the entire factory image. I didn't lose any data. Same boat as you, rooted and using TWRP with LTE hack.
Sfkn2 said:
I literally just flashed from 4.4 to 4.4.2 by flashing the entire factory image. I didn't lose any data. Same boat as you, rooted and using TWRP with LTE hack.
Click to expand...
Click to collapse
Downloaded the 435mb OCCAM KOT49H factory image from google? Then you put the entire .zip on the sdcard and flash it through twrp? Is that it?
I'm rooted and have twrp also, but i don't know if i can just flash the full factory image. I want to be stock and rooted!
Thank you!
EDIT: Sorry, i have found the solution in here: http://forum.xda-developers.com/showthread.php?t=2145848
I didn't know you could download these files and use them as "manual OTA update"..
Thanks again
Booshidu said:
Downloaded the 435mb OCCAM KOT49H factory image from google? Then you put the entire .zip on the sdcard and flash it through twrp? Is that it?
I'm rooted and have twrp also, but i don't know if i can just flash the full factory image. I want to be stock and rooted!
Thank you!
EDIT: Sorry, i have found the solution in here: http://forum.xda-developers.com/showthread.php?t=2145848
I didn't know you could download these files and use them as "manual OTA update"..
Thanks again
Click to expand...
Click to collapse
Just system.img
Sent from my Nexus 4, while driving in my Evo9.