Database Users

Problem with the partition table

Hi all....
Today i was trying to flash the latest firmware for my i9506 (I9506XXUBNA2).
All flashing went fine...until it reaches the "Hidden" partition.
So....a big FAIL appears.
I was facing the same problem when i flashed the France(Orange) 4.3 firmware but then the problem was solved by flashing Philz recovery and rebooted.
Now it doesn`t work anymore...it gets stuck at booting animation.
Any solution for this?Maybe a .pit file will solve the problem?
Thank you!

Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!

Moved here and OP please read the Forum Rules on posting, as this does not belong in the Dev Sections. Thanks

still with "samsung keyboard error"
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
Click to expand...
Click to collapse
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:

marbayn said:
hey man!
i've tried your procedure. i still got the keyboard stopped error. i used the odin, rom and recovery you have provided.
have you done re-partition? i havent done re-partition. maybe that could be the reason why i still had that error. do you have other solution for that?
---------- Post added at 09:30 PM ---------- Previous post was at 09:11 PM ----------
im so sorry to what i have said this procedure doesnt work. this procedure is tested by me and it worked without keyboard error after reboot.
THE PROCEDURE MUST BE FOLLOWED RELIGIOUSLY!
NO AUTO REBOOT IS A MUST, YOUR VERY FIRST BOOT MUST BE IN "RECOVERY MODE"
---------- Post added at 09:36 PM ---------- Previous post was at 09:30 PM ----------
THANK YOU VERY MUCH "aresbv2000" !!!
YOUR PROCEDURE WORKED!
I failed because i didnt follow the whole procedure properly. now i realized how crucial tiny details is.
"NO AUTO REBOOT IN ODIN, THE VERY FIRST BOOT MUST BE IN RECOVERY MODE"
:laugh::good:
Click to expand...
Click to collapse
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?

souhail.beraich said:
I have tried the procedure but it doesn"t work. have you done re-partition when you flash recovery ?
Click to expand...
Click to collapse
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.

marbayn said:
Just try again and right after you flashed the recovery image reboot right away to recovery mode. Press volume up and power right away.
Click to expand...
Click to collapse
have you done re-partition when you flash recovery image ?

souhail.beraich said:
have you done re-partition when you flash recovery image ?
Click to expand...
Click to collapse
I did not tick re-partition.:good:

root won't stick
again you saved my ass! my samsung keyboard is now working!
next and only issue left is to make root stick! i downloaded "http://forum.xda-developers.com/showthread.php?t=2529064" and flashed via philz touch. i gain root on one boot only.. supersu is fcuked, wont block knox or install su binarys. but all apps gain root access except "es file explorer" which won't enable "root explorer". if i only soft reboot the root sticks.
anyone successfully rooted i9506 4.3?

I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?

Celzeron said:
I have one problem after this, my Wifi aint wokin, any idea on how to fix that ?
Click to expand...
Click to collapse
Redid the operartion with the french Rom and it now seems to be working :good::good:
Thx a bunch for this post, i would have been fcuked without it :cyclops:

This post just saved my day

aresbv2000 said:
Problem solved!It wasn`t the partition table the problem.Even so...Odin still gives "FAIL" error when trying to flash "Hidden" partition.
The main problem when updating to 4.3 is the recovery partion wich is not flashed properly.
So...if you want to update to latest 4.3 (with no errors after booting, like Samsung Keboard FC`ing every 5 seconds) try this firmware, this Odin and this recovery!
So....at first...flast the attached firmware via Odin!
Uncheck the "Auto Reboot" box.
Odin will "FAIL" to flash "HIDDEN" partition!
Don`t worry....just press and keep the power+volume down buttons until the phone reboots again in download mode.
Reset Odin and again, uncheck the "Auto Reboot" box before flashing "recovery.tar.md5"
Flash "recovery.tar.md5" provided here!
After the recovery is flashed, first the boot must be in recovery mode!enter in recovery mode by pressing and keeping volume up and power button.
In recovery mode the phone automatically will flash something on your device!
After that....the phone will reboot!
That`s it!
I don`t know if this method will void the Knox warranty because i already have KNOX WARRANTY VOID : 0x1 so try at your own risk!
Click to expand...
Click to collapse
hi , please , can you post new link ?? thx

allal123 said:
hi , please , can you post new link ?? thx
Click to expand...
Click to collapse
Sorry mate...i do not own this phone anymore! I`ve had enough with this crappy Sam****! Now I have a Sony Xperia Z1 Compact! 10x better than Samsung! This is just my opinion....not a negative publicity! Have a nice day my friend!

this phone is not a crappy phone
here is the link where Our phone is so much alive.
http://forum.xda-developers.com/showthread.php?t=2597058
---------- Post added at 07:22 PM ---------- Previous post was at 07:17 PM ----------
its maturing here:
http://forum.xda-developers.com/showthread.php?t=2767448

Maybe is too late but will help to some other members.
Wanted to root mine i9506 so i must change build for proper root
I got same problem but mine case was 5.0.1 Lolipop ,Odin will fail flashing hidden part
Flashed with same version and country origin of mine phone.
After phone ON get some errors android process stoped bla bla bla
Factory reset with Vol UP + home + power and now all fine

[Q] N900 Rooted With Custom ROM to Lollipop?

i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i couldn't update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
(typo edits)

mrhomiec said:
i've been reading this thread over in the General discussions:
http://forum.xda-developers.com/galaxy-note-3/general/lollipop-ota-note-3-n900-started-t2973773
i currently have K14-Dr.Ketan custom ROM flashed to my phone:
http://forum.xda-developers.com/showthread.php?t=2519897
and my recovery is TWRP v2.7.1.0
the CSC code is: INU.
at first, i thought i could update to the Lollipop update because its CSC code is XXV/THL
but then i saw a reply somewhere in the midst saying to flash a 4.4.2 version to change my code to the proper one.
i'm not entirely sure what to do. any help would be much appreciated!
Click to expand...
Click to collapse
It take time to change csc code.
Read this topic and change to XXV.
http://forum.xda-developers.com/showthread.php?t=2342328

so i don't understand a few things in regard to the steps...
1b. You are on stock ROM but is on other's region firmware and is rooted (based on Samsung official firmware). Same, just download your stock latest update firmware from sammobile.com first. Which contains your region's CSC.
Click to expand...
Click to collapse
so since my stock custom ROM is INU-based, i go and download the INU firmware?
2. Ok, now both are on a stock ROM but rooted, check your CSC using the CSC Changer app.
3. If not working, then install ES File Explorer from Playstore or link below (recommended) or other file browser with Root access ability. Open the side menu and select Root Explorer.
Click to expand...
Click to collapse
i only found one app in the Play Store with this name, and it's 0.99 cents, before i buy it, is that the correct one? or if i don't want to buy it, i just continue with step 3?
7. Alright all done, reboot your phone first. Then reset the BIN counter using Triangle Away. (Again, friendly reminder: Do not enter CWM Recovery again as it will increase the BIN counter) Reboot and put your phone in Download mode. Flash the stock ROM you've downloaded though ODIN.
Click to expand...
Click to collapse
so if i go with the ES File Explorer route, i can then go straight into flashing the Lollipop firmware?
also, do i need the app Triangle Away? if i don't care about the BIN counter?
my goal is to be unrooted, on Lollipop, with/without Knox counter tripped.

It doesnt matter INU or whatever region. As long as your device is N900 , Just download NJ3 firmware with XXV region which download link given in that post or download from sammobile.
Secondly, better to do factory reset after u flashed NJ3.
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
4. You may need to flash NJ3 again or wipe data until u see ur csc is xxv.
5. Follow the instruction about lollipop post.
6. You can skip supersu 2.40 step if u dont want a root.

satslu said:
3. No need to buy csc changer. Just install free"phone info" from play store and check ur csc and if not xxv, change ur csc code to xxv with that "phone info" application.
Click to expand...
Click to collapse
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo

mrhomiec said:
i found 2 apps on the Play Store, which one is it?
Phone Info *Samsung* (this one has more downloads and reviews)
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Phone Info
https://play.google.com/store/apps/details?id=sysinfo.sysinfo.sysinfo
Click to expand...
Click to collapse
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo

satslu said:
The upper one.
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Click to expand...
Click to collapse
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?

mrhomiec said:
thank you! just so i understand correctly, i use this app to change my code, then i can go straight to flashing the 5.0 firmware in Odin?
Click to expand...
Click to collapse
You may need to flash NJ3 again or wipe data until u see ur csc is xxv. Follow the instruction about lollipop post and yes u can start lollipop step.

i ended up following the "new" method posted to the original topic. and just in case anyone finds this thread, here are the exact steps i took:
1. Flash TWRP via ODIN
Click to expand...
Click to collapse
i was using Odin 3.09. put your N900 into download mode by powering it off, then holding the Vol Down + Home Button + Power Button.
then within Odin, click on the "AP" button and browse for the "openrecovery-twrp-2.8.1.0-ha3g.img.tar" file, and click the Start button
1.1 Enter TWRP and create Backup. (To safe)
Click to expand...
Click to collapse
boot to custom recovery by having your N900 powered off, then holding the Vol Up + Home Button + Power Button.
perform a nandroid backup, and reboot the phone back into Android
1.2. Copy unziped file at /twrp/4d00279c40989079/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 to phone /twrp/xxxxxx/2014-12-18--00-18-21 LRX21V.N900XXUEBNL4 where xxxxxx is unique generated for your device
Click to expand...
Click to collapse
now that your phone is backed up, copy the extracted "TWRP-LRX21V.N900XXUEBNL4-samsungviet.vn.zip" to your nandroid backup location
2. Enter TWRP -> Wipe -Swipe to Factory Reset
Click to expand...
Click to collapse
boot back into custom recovery (holding the Vol Up + Home Button + Power Button.)
3. Return TWRP Home -> Restore -> Select "2014-12-18--00-18-21 LRX21V.N900XXUEBNL4"
Click to expand...
Click to collapse
select the extracted folder as your restore state
4. Select everything to restore
Click to expand...
Click to collapse
for me, there was only 3 choices to select, and they were already pre-selected.
5. When finish Restore, return TWRP Home -> Reboot -> Download
Click to expand...
Click to collapse
i had to power off the phone instead of using TWRP to reboot into Download Mode, then do the Vol Down + Home Button + Power Button.
6. Flash Bootloader 5.0 (without Auto Reboot) then pull out battery and re-enter download mode
Click to expand...
Click to collapse
then in Odin, click the "BL" button and browse for the "bootloader-5.0.tar" and click Start
7. Flash stock recovery (with auto reboot)
Click to expand...
Click to collapse
after pulling the battery and putting it back in. boot to Download Mode again (Vol Down + Home Button + Power Button)
in Odin, click on the "AP" button, and browse for the "recovery.tar" and click Start
8. First boot will take 5-10 mins.
Click to expand...
Click to collapse
voila. done.
BLUETOOTH FIX
Flash cwm via odin (dont tick auto reboot)
Take off batre and cable. And take on again.
Press volume up + home + power button and get in recovery mode (cwm).
Flash bluetooth dix from this forum (http://forum.xda-developers.com/gala...-roms-t2938607)
Get in the download mode and flash stock recovery.
reboot and you can use your bluetooth again
Click to expand...
Click to collapse
although i don't understand this step.
it says to flash CWM even though the previous steps have you flash TWRP. (edit: and then the previous steps have you flash stock recovery)
then it says to flash the ZIP file within the custom recovery, boot to download mode, and flash stock recovery?
any help on this part?

Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
Once android L is running on ur machine , u can stay with stock recovery or custom recovery.
Sent from my SM-N900 using Tapatalk
---------- Post added at 08:26 AM ---------- Previous post was at 08:25 AM ----------
Once android L is booted to ur machine you can stay with stock or custom recovery.
Sent from my SM-N900 using Tapatalk

satslu said:
Just consider yourself that you are now using android L which is with stoch recovery after u have done all procedure. And yes u facing bluetooth error.
So u have to flash custom recovery( CWM) to flash bluetooth fix zip. May be u can use twrp again to flash bluetoothfix zip.
Click to expand...
Click to collapse
oh yeah, duh. step 7- flash stock recovery.
so i tried to flash TWRP again and i received an error in Odin. i'm thinking it's because i have to root again.
without root, i can't fix the bluetooth then?

I dont think u need root for that.
May be u change ur recovery to CWM than twrp and flash bluetooth fix
Sent from my SM-N900 using Tapatalk

[Q] Samsung galaxy tab 4 10.1 sm-t530 stuck on download mode.

Hey guys, recently I tried to flash the latest version of TWRP using Odin on this device, and i now find myself stuck on download mode (downloading, please do not turn off target!!). I can't get into any menu using any method of pressing buttons. Not even normal boot up, unless I flash recovery in odin every time. I wanted to flash the fitting version of CM11 i tried using TWRP the app and flashify to flash the zip, but no luck. I've searched everywhere!
Can you help me, i'd be greatfull forever!!

glenda_0596444 said:
Hey guys, recently I tried to flash the latest version of TWRP using Odin on this device, and i now find myself stuck on download mode (downloading, please do not turn off target!!). I can't get into any menu using any method of pressing buttons. Not even normal boot up, unless I flash recovery in odin every time. I wanted to flash the fitting version of CM11 i tried using TWRP the app and flashify to flash the zip, but no luck. I've searched everywhere!
Can you help me, i'd be greatfull forever!!
Click to expand...
Click to collapse
It sounds like you have to Odin back to stock (I had the same problem and that's how I fixed it). Next time when you try installing, download the TWRP img file and use an app called Flashify from the Play Store to install

glenda_0596444 said:
Hey guys, recently I tried to flash the latest version of TWRP using Odin on this device, and i now find myself stuck on download mode (downloading, please do not turn off target!!). I can't get into any menu using any method of pressing buttons. Not even normal boot up, unless I flash recovery in odin every time. I wanted to flash the fitting version of CM11 i tried using TWRP the app and flashify to flash the zip, but no luck. I've searched everywhere!
Can you help me, i'd be greatfull forever!!
Click to expand...
Click to collapse
At first ,emergency exit from download mode : hold on Power , Volume down about 10-20sec .
At second , you may to flash in download mode anything again : firmware , recovery , etc .
My advice : to flash TWRP recovery . For example from here https://www.androidfilehost.com/?w=files&flid=29953

thisisapoorusernamechoice said:
It sounds like you have to Odin back to stock (I had the same problem and that's how I fixed it). Next time when you try installing, download the TWRP img file and use an app called Flashify from the Play Store to install
Click to expand...
Click to collapse
I have tried to flash recovery, but it still goes to download mode, saying that it couldn't boot in normal mode.

glenda_0596444 said:
I have tried to flash recovery, but it still goes to download mode, saying that it couldn't boot in normal mode.
Click to expand...
Click to collapse
In Odin , when you flash recovery uncheck reboot and go to recovery manually .
---------- Post added at 04:37 PM ---------- Previous post was at 04:35 PM ----------
Or flash your present firmware .

repey6 said:
In Odin , when you flash recovery uncheck reboot and go to recovery manually .
---------- Post added at 04:37 PM ---------- Previous post was at 04:35 PM ----------
Or flash your present firmware .
Click to expand...
Click to collapse
i think i'm running out of options here. it's still booting into download mode, i've tried that.

glenda_0596444 said:
i think i'm running out of options here. it's still booting into download mode, i've tried that.
Click to expand...
Click to collapse
if you flash recovery successfully in Odin , go to him manually (home+volume up+power) from download mode . Make wipe - factory reset . Reboot to system .

repey6 said:
if you flash recovery successfully in Odin , go to him manually (home+volume up+power) from download mode . Make wipe - factory reset . Reboot to system .
Click to expand...
Click to collapse
I did as you said after succesful flash, pressed the buttons in download mode and it just rebooted and went back to download mode. Maybe I should try another recovery file or so, do you know a good download link?

glenda_0596444 said:
I did as you said after succesful flash, pressed the buttons in download mode and it just rebooted and went back to download mode. Maybe I should try another recovery file or so, do you know a good download link?
Click to expand...
Click to collapse
power button press last

repey6 said:
power button press last
Click to expand...
Click to collapse
The tablet will just turn itself off.

glenda_0596444 said:
The tablet will just turn itself off.
Click to expand...
Click to collapse
When I check the TWRP manager app it says that no recovery is installed. now that i've seen that I tried to use the file given by the app but it still won't work!

glenda_0596444 said:
The tablet will just turn itself off.
Click to expand...
Click to collapse
Three buttons are clamped at the same time, but the power last .
---------- Post added at 05:24 PM ---------- Previous post was at 05:23 PM ----------
not first !

repey6 said:
Three buttons are clamped at the same time, but the power last .
---------- Post added at 05:24 PM ---------- Previous post was at 05:23 PM ----------
not first !
Click to expand...
Click to collapse
I didn't press the power as first I pressed it last and the home and volume up together. Still turns itself off or goes to downloade mode.

glenda_0596444 said:
I didn't press the power as first I pressed it last and the home and volume up together. Still turns itself off or goes to downloade mode.
Click to expand...
Click to collapse
sorry, very strange. Well, that same flash the your firmware via Odin

repey6 said:
sorry, very strange. Well, that same flash the your firmware via Odin
Click to expand...
Click to collapse
Odin doesn't seem to find zip files, it only finds target files to flash, so flashing the firmware won't go, i have it in a zip

glenda_0596444 said:
Odin doesn't seem to find zip files, it only finds target files to flash, so flashing the firmware won't go, i have it in a zip
Click to expand...
Click to collapse
Extract the tar.md5 file from within the zip

glenda_0596444 said:
Odin doesn't seem to find zip files, it only finds target files to flash, so flashing the firmware won't go, i have it in a zip
Click to expand...
Click to collapse
of course , only tar and tar.md5 are Odin files . Unpack zip-archiv . If you need firmware take it here http://forum.xda-developers.com/tab-4/general/links-stock-galaxy-tab-4-firmware-t3013128

repey6 said:
of course , only tar and tar.md5 are Odin files . Unpack zip-archiv . If you need firmware take it here http://forum.xda-developers.com/tab-4/general/links-stock-galaxy-tab-4-firmware-t3013128
Click to expand...
Click to collapse
it worked, thanks!

SM-G900F Root Help

hello guys, i have a Samsung galaxy S5 (SM-G900F)
i installed the latest OTA updates,but today i tried to root my device with CF-auto root file,odin did successfully but the phone didn't restart,it keep saying
recovery rooting,
recovery is not standadid enforcing or something like that
set warranty bit : recovery
it keep saying for like 10min but nothing showed up,then i flashed phiztouch recovery file,then the device reboot successfully but after i went to the recovery mode,there is no phiztouch recovery,its the stock recovery
can anyone help me to root the device n to install a phiztouch recovery

CF Auto Root should have worked, I'd try that again
Make sure you use the G900F version
Run ODIN as Admin
Only have F.Reset Time and Auto Reboot ticked in ODIN
Obviously phone in download mode
--
Other alternatives are to flash TWRP with ODIN, then SuperSU from TWRP

*Detection* said:
CF Auto Root should have worked, I'd try that again
Make sure you use the G900F version
Run ODIN as Admin
Only have F.Reset Time and Auto Reboot ticked in ODIN
Obviously phone in download mode
--
Other alternatives are to flash TWRP with ODIN, then SuperSU from TWRP
Click to expand...
Click to collapse
No luck bro,i installed Cf auto root file like 3 times,still it keep saying the same thing,then i installed TWRP
its successfully boots up,but when i go to the recovery still i have the stock recovery :'( :'(

Are you using a native PC to flash with ODIN?
Got the Samsung drivers installed?
Mine is the G900F and CF auto root works fine with all firmwares to date, wonder if your bootloader is locked?

*Detection* said:
Are you using a native PC to flash with ODIN?
Got the Samsung drivers installed?
Mine is the G900F and CF auto root works fine with all firmwares to date, wonder if your bootloader is locked?
Click to expand...
Click to collapse
I dont know how to check the bootloader locked or not
i dont know bro,i did everything correctly
yeah i have installed samsung drivers
but no luck
and now the device keep saying my device is modified
but no root access
I tried to install supersu from playstore
but still no luck

I have the same problem....
""recovery rooting,
recovery is not standadid enforcing
set warranty bit : recovery""
I use:
Odin3_v3.10.6
CF-Auto-Root-klte-kltedx-smg900f (5.0.0)
Rom: Baltic (SEB) - SEB-G900FXXU1BOD3-20150527145300 (2015.04.09)

vinura kithmal said:
I dont know how to check the bootloader locked or not
i dont know bro,i did everything correctly
yeah i have installed samsung drivers
but no luck
and now the device keep saying my device is modified
but no root access
I tried to install supersu from playstore
but still no luck
Click to expand...
Click to collapse
Try flashing TWRP from ODIN, then SuperSU from TWRP

[email protected] said:
I have the same problem....
""recovery rooting,
recovery is not standadid enforcing
set warranty bit : recovery""
I use:
Odin3_v3.10.6
CF-Auto-Root-klte-kltedx-smg900f (5.0.0)
Rom: Baltic (SEB) - SEB-G900FXXU1BOD3-20150527145300 (2015.04.09)
Click to expand...
Click to collapse
Yeah,i used odin 3.07 n 3.09 and 3.10.6
but no luck with
i did it with the CF-Auto-Root-klte-kltedx-smg900f (5.0.0) too

*Detection* said:
Try flashing TWRP from ODIN, then SuperSU from TWRP
Click to expand...
Click to collapse
thanx for your suport, i did flash TWRP ,same problem,no luck, um unable to set a custom recovery,odin isdoing a great job,the deices boots up,but when go to the recovery still i have the stock recovery

vinura kithmal said:
thanx for your suport, i did flash TWRP ,same problem,no luck, um unable to set a custom recovery,odin isdoing a great job,the deices boots up,but when go to the recovery still i have the stock recovery
Click to expand...
Click to collapse
Same problem here
Odin 3 V1.85 does everthing correctly, then phone boots correctly, but when I go to recovery, still stock:crying:
Could it be that it has something to do with lollipop 5.0?
Please advice

So long as your bootloader is unlocked, CF Auto Root works fine with the G900F and all Android versions up to the latest

*Detection* said:
So long as your bootloader is unlocked, CF Auto Root works fine with the G900F and all Android versions up to the latest
Click to expand...
Click to collapse
How can I check if my bootloader is locked ord unlocked? Sorry for my noob question.

Did you wipe data before flashing?

Ditomasso said:
Same problem here
Odin 3 V1.85 does everthing correctly, then phone boots correctly, but when I go to recovery, still stock:crying:
Could it be that it has something to do with lollipop 5.0?
Please advice
Click to expand...
Click to collapse
Um not sure too
it cant be
Cz i saw so many videos and tutorials,
they are installing the custom recovery successfully in lolipop

Akalsemann said:
Did you wipe data before flashing?
Click to expand...
Click to collapse
You mean before flashing the custom recovery,
i nvr wiped data before flashing a recovery or a CF auto root file in my earlier devices
but now i did
But still no success bro
Can u tell me the process how to check the bootloader locked or unlocked ??

Akalsemann said:
Did you wipe data before flashing?
Click to expand...
Click to collapse
Yes I did.
This is what I did step by step:
I have odin 3V1.85 installed on my pc and from there I followed all instructions
I put following file in PDA. philz_touch_6.26.6-klte.tar.md5
After that phone rebooted succesfully. But when I want to enter recovery it gives me a warning sign and it enters stock recovery
Android system recovery <3e>
LRX21T.G900FXXU1BNL9
I have flashed alot of roms with my previous phone but this is new for me.
So again appolize for all the "stupid"questions!
I hope someone knows the solution.

Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
vinura kithmal said:
You mean before flashing the custom recovery,
i nvr wiped data before flashing a recovery or a CF auto root file in my earlier devices
but now i did
But still no success bro
Can u tell me the process how to check the bootloader locked or unlocked ??
Click to expand...
Click to collapse
Ditomasso said:
Yes I did.
This is what I did step by step:
I have odin 3V1.85 installed on my pc and from there I followed all instructions
I put following file in PDA. philz_touch_6.26.6-klte.tar.md5
After that phone rebooted succesfully. But when I want to enter recovery it gives me a warning sign and it enters stock recovery
Android system recovery <3e>
LRX21T.G900FXXU1BNL9
I have flashed alot of roms with my previous phone but this is new for me.
So again appolize for all the "stupid"questions!
I hope someone knows the solution.
Click to expand...
Click to collapse
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same

Akalsemann said:
Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Ok thank you! I'll try this ad soon as I get home. I'll come back to you guys when I have the change

Akalsemann said:
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
This worked superbly,thank you very much man,thanx alot,it so annoying to use an android without root,once again thanx alot longlive

Akalsemann said:
Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Mr.Akalsemann you're a wizzard!
It works! Thank you very much! I'll now finally root my phone and put some awesome rom on it!
Any suggestions anyone?

ROOT / TWRP / Stock RECOVERY / Stock BOOT - Samsung J1 Ace SM-J110F/M/G

Mod Edit links removed

ROM-HUAWEI said:
Samsung J1 Ace SM-J110F/SM-J110M/SM-J110G ROOT / TWRP / Stock RECOVERY / Stock BOOT
1. Flash custom recovery TWRP. Used TWRP 2.8.7.0:
TWRP 2.8.7.0 SM-J110F
TWRP 2.8.7.0 SM-J110G
TWRP 2.8.7.0 SM-J110M
Not work SM-J110H and SM-J110L
2. Install used TWRP SuperSU_2.46.zip [KNOX 0x0]
3. If need restore stock recovery, download and flash AP STOCK RECOVERY + BOOT.
All files flash ODIN.
Stock Firmware ROM - Download
Click to expand...
Click to collapse
Worked great! SM-J110F

Wait version SM-J110L

TWRP on J110M
I installed the TWRP (TWRP 2.8.7.0 SM-J110M) recovery using Odin but when i try to enter it, pressing Volume UP + Home + Power, my phone goes into the stock android recovery. Am I missing something? What key-combo did you used? I have a Galaxy ACE J1 (SM-J110M). Thanks in advance.

SM-J110M not worked
Same problem here. ¿any suggestion?, thanks-
AP: J110MUBU0AOK2
CP: J110MUBU0AOK3
CSC: J110MUWA0AOK1
Model Number:SM-J110M
Android Version: 5.1.1
Baseband Version:J110MUBU0AOK3
Kernel Version: 3.14.27-866717
[email protected] #1
Tue Nov 3 20:17:124 KST 2015
Build Number
LMY48BJ110MUBU0AOK2
Android security patch
2015-11-01

who get TWRP not installed (back to stock recovery after flashing)
try to untick autoreboot in odin
when odin say PASS/RESET with blue/green screen
remove USB cable, then try to boot TWRP manually (POWER+VOLUP+HOME)
regards

frtorres said:
Same problem here. ¿any suggestion?, thanks-
AP: J110MUBU0AOK2
CP: J110MUBU0AOK3
CSC: J110MUWA0AOK1
Model Number:SM-J110M
Android Version: 5.1.1
Baseband Version:J110MUBU0AOK3
Kernel Version: 3.14.27-866717
[email protected] #1
Tue Nov 3 20:17:124 KST 2015
Build Number
LMY48BJ110MUBU0AOK2
Android security patch
2015-11-01
Click to expand...
Click to collapse
I noticed, under developer options, USB debugging can not be set on or off (seems inactivated from fabric)
Does this affect why I can not root my device?

frtorres said:
I noticed, under developer options, USB debugging can not be set on or off (seems inactivated from fabric)
Does this affect why I can not root my device?
Click to expand...
Click to collapse
Finally I reinstall stock firmware from SAM Mobile, but same results. somehow trying to install TWRP is refused when entering recovery mode.
If I disable in Odin reboot option and carefully enter to recovery avoiding the system to restore the old recovery, It will no enter recovery mode until I let the phone show the telco logo and then I get original recovery.
As something new I noticed USB debugginf ius disable to turn it ON/OFF. This is a mobile phone in a company plan with the local telco. Maybe it is restricted to root or to install another firmware.
I give up... I appreciate comments on this...

when you finish the flash of the TWRP file for J110M you must be hold the vol up and home until the phone reboot twice, the second reboot enter to the TWRP mode

I have the j110m and the way to get TWRP to work is to try both versions. 3.0.0.0 got stuck on the boot and never got me into recovery it always went to the provider logo. I tried the other one (2.XX) with ODIN, had auto reboot ticked off, and just like the guy above said wait till the second boot. Voila
---------- Post added at 04:48 PM ---------- Previous post was at 04:45 PM ----------
by the way, is there any chance in seeing Cyanogenmod on this? Im looking and looking but I cant find anything. Just one post where some guy wants to port CM 12 but no one has responded to his post yet.

frutsy said:
when you finish the flash of the TWRP file for J110M you must be hold the vol up and home until the phone reboot twice, the second reboot enter to the TWRP mode
Click to expand...
Click to collapse
thx a lot buddy... finally i can boot my j110g into twrp recovery mode after flashing using odin and your method:good::good::good:

Android 5.1.1 for Samsung Galaxy J1 Ace SM-J110F
Is there any way possible to get android 5.1.1 on my J1 ACE SM-J110F.

help
Sir help me how to root n install twrp recovery mod on my galaxy j110f ace