SM-G900F Root Help - Galaxy S 5 Q&A, Help & Troubleshooting

hello guys, i have a Samsung galaxy S5 (SM-G900F)
i installed the latest OTA updates,but today i tried to root my device with CF-auto root file,odin did successfully but the phone didn't restart,it keep saying
recovery rooting,
recovery is not standadid enforcing or something like that
set warranty bit : recovery
it keep saying for like 10min but nothing showed up,then i flashed phiztouch recovery file,then the device reboot successfully but after i went to the recovery mode,there is no phiztouch recovery,its the stock recovery
can anyone help me to root the device n to install a phiztouch recovery

CF Auto Root should have worked, I'd try that again
Make sure you use the G900F version
Run ODIN as Admin
Only have F.Reset Time and Auto Reboot ticked in ODIN
Obviously phone in download mode
--
Other alternatives are to flash TWRP with ODIN, then SuperSU from TWRP

*Detection* said:
CF Auto Root should have worked, I'd try that again
Make sure you use the G900F version
Run ODIN as Admin
Only have F.Reset Time and Auto Reboot ticked in ODIN
Obviously phone in download mode
--
Other alternatives are to flash TWRP with ODIN, then SuperSU from TWRP
Click to expand...
Click to collapse
No luck bro,i installed Cf auto root file like 3 times,still it keep saying the same thing,then i installed TWRP
its successfully boots up,but when i go to the recovery still i have the stock recovery :'( :'(

Are you using a native PC to flash with ODIN?
Got the Samsung drivers installed?
Mine is the G900F and CF auto root works fine with all firmwares to date, wonder if your bootloader is locked?

*Detection* said:
Are you using a native PC to flash with ODIN?
Got the Samsung drivers installed?
Mine is the G900F and CF auto root works fine with all firmwares to date, wonder if your bootloader is locked?
Click to expand...
Click to collapse
I dont know how to check the bootloader locked or not
i dont know bro,i did everything correctly
yeah i have installed samsung drivers
but no luck
and now the device keep saying my device is modified
but no root access
I tried to install supersu from playstore
but still no luck

I have the same problem....
""recovery rooting,
recovery is not standadid enforcing
set warranty bit : recovery""
I use:
Odin3_v3.10.6
CF-Auto-Root-klte-kltedx-smg900f (5.0.0)
Rom: Baltic (SEB) - SEB-G900FXXU1BOD3-20150527145300 (2015.04.09)

vinura kithmal said:
I dont know how to check the bootloader locked or not
i dont know bro,i did everything correctly
yeah i have installed samsung drivers
but no luck
and now the device keep saying my device is modified
but no root access
I tried to install supersu from playstore
but still no luck
Click to expand...
Click to collapse
Try flashing TWRP from ODIN, then SuperSU from TWRP

[email protected] said:
I have the same problem....
""recovery rooting,
recovery is not standadid enforcing
set warranty bit : recovery""
I use:
Odin3_v3.10.6
CF-Auto-Root-klte-kltedx-smg900f (5.0.0)
Rom: Baltic (SEB) - SEB-G900FXXU1BOD3-20150527145300 (2015.04.09)
Click to expand...
Click to collapse
Yeah,i used odin 3.07 n 3.09 and 3.10.6
but no luck with
i did it with the CF-Auto-Root-klte-kltedx-smg900f (5.0.0) too

*Detection* said:
Try flashing TWRP from ODIN, then SuperSU from TWRP
Click to expand...
Click to collapse
thanx for your suport, i did flash TWRP ,same problem,no luck, um unable to set a custom recovery,odin isdoing a great job,the deices boots up,but when go to the recovery still i have the stock recovery

vinura kithmal said:
thanx for your suport, i did flash TWRP ,same problem,no luck, um unable to set a custom recovery,odin isdoing a great job,the deices boots up,but when go to the recovery still i have the stock recovery
Click to expand...
Click to collapse
Same problem here
Odin 3 V1.85 does everthing correctly, then phone boots correctly, but when I go to recovery, still stock:crying:
Could it be that it has something to do with lollipop 5.0?
Please advice

So long as your bootloader is unlocked, CF Auto Root works fine with the G900F and all Android versions up to the latest

*Detection* said:
So long as your bootloader is unlocked, CF Auto Root works fine with the G900F and all Android versions up to the latest
Click to expand...
Click to collapse
How can I check if my bootloader is locked ord unlocked? Sorry for my noob question.

Did you wipe data before flashing?

Ditomasso said:
Same problem here
Odin 3 V1.85 does everthing correctly, then phone boots correctly, but when I go to recovery, still stock:crying:
Could it be that it has something to do with lollipop 5.0?
Please advice
Click to expand...
Click to collapse
Um not sure too
it cant be
Cz i saw so many videos and tutorials,
they are installing the custom recovery successfully in lolipop

Akalsemann said:
Did you wipe data before flashing?
Click to expand...
Click to collapse
You mean before flashing the custom recovery,
i nvr wiped data before flashing a recovery or a CF auto root file in my earlier devices
but now i did
But still no success bro
Can u tell me the process how to check the bootloader locked or unlocked ??

Akalsemann said:
Did you wipe data before flashing?
Click to expand...
Click to collapse
Yes I did.
This is what I did step by step:
I have odin 3V1.85 installed on my pc and from there I followed all instructions
I put following file in PDA. philz_touch_6.26.6-klte.tar.md5
After that phone rebooted succesfully. But when I want to enter recovery it gives me a warning sign and it enters stock recovery
Android system recovery <3e>
LRX21T.G900FXXU1BNL9
I have flashed alot of roms with my previous phone but this is new for me.
So again appolize for all the "stupid"questions!
I hope someone knows the solution.

Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
vinura kithmal said:
You mean before flashing the custom recovery,
i nvr wiped data before flashing a recovery or a CF auto root file in my earlier devices
but now i did
But still no success bro
Can u tell me the process how to check the bootloader locked or unlocked ??
Click to expand...
Click to collapse
Ditomasso said:
Yes I did.
This is what I did step by step:
I have odin 3V1.85 installed on my pc and from there I followed all instructions
I put following file in PDA. philz_touch_6.26.6-klte.tar.md5
After that phone rebooted succesfully. But when I want to enter recovery it gives me a warning sign and it enters stock recovery
Android system recovery <3e>
LRX21T.G900FXXU1BNL9
I have flashed alot of roms with my previous phone but this is new for me.
So again appolize for all the "stupid"questions!
I hope someone knows the solution.
Click to expand...
Click to collapse
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same

Akalsemann said:
Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Ok thank you! I'll try this ad soon as I get home. I'll come back to you guys when I have the change

Akalsemann said:
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
This worked superbly,thank you very much man,thanx alot,it so annoying to use an android without root,once again thanx alot longlive

Akalsemann said:
Hmm odd, i had the exact same problem when rooting about 3 days ago, now it works but i can't for the life of me figure out how i managed to get it to work. Ill get back to you.
---------- Post added at 07:29 PM ---------- Previous post was at 07:23 PM ----------
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Mr.Akalsemann you're a wizzard!
It works! Thank you very much! I'll now finally root my phone and put some awesome rom on it!
Any suggestions anyone?

Related

[Q] Flashing Clockwokmod on S4 I9505 won't work, any idea why not?

Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?
King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.
Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !
Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that

tried to root phone, stuck in bootloop (Recovery is not Seandroid Enforcing)

so i tired to root my note 4 (SM-N910F) with this thread.
http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
Click to expand...
Click to collapse
i did exactly what he said and now im stuck in bootloop.
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
Click to expand...
Click to collapse
please help!!
ben.anter said:
so i tired to root my note 4 (SM-N910F) with this thread.
http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
i did exactly what he said and now im stuck in bootloop.
please help!!
Click to expand...
Click to collapse
]]]
boot in to download mode flash custom recovery via odin like twrp then you can boot again and then flash super su flashable zip from recovery 2.48 i think it is then you will be rooted thats what i done
strikerdj2011 said:
]]]
boot in to download mode flash custom recovery via odin like twrp then you can boot again and then flash super su flashable zip from recovery 2.48 i think it is then you will be rooted thats what i done
Click to expand...
Click to collapse
can you help me with that?
pull you battery out so phone is off then put it back in and follow this >>> https://www.youtube.com/watch?v=p-zvwUS6as4
Then Follow This >>> https://www.youtube.com/watch?v=azHHB9X15LE
ben.anter said:
so i tired to root my note 4 (SM-N910F) with this thread.
http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
i did exactly what he said and now im stuck in bootloop.
please help!!
Click to expand...
Click to collapse
were you on lolipop when you were rooting???
---------- Post added at 02:07 AM ---------- Previous post was at 02:03 AM ----------
ben.anter said:
so i tired to root my note 4 (SM-N910F) with this thread.
http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
i did exactly what he said and now im stuck in bootloop.
please help!!
Click to expand...
Click to collapse
download the lolipop firmware of germany ...from sammobile.com/firmwares
put the phone in download mode.....
through odin flash this firmware on your phone....
you have lolipop.... then you will be rooted by exactly the same method which failed you last time
The best, easy and most safe way to fix your problem is to flashing a stock firmware again with odin. Just pull out your battery, put it on again, get in Download mode and flash the Rom with ODIN, let it boot and you will have your phone working again.
Once you get it, download this and extract it until you get a ".tar" file. Put your device in download mode again and flash the tar file. It should be working nice (there could be some random reboots while booting, that's normal for CF-Root process, just wait)
If you can't enter in recovery mode after this, download TWRP for the N910F from here.
Cheers!
galaxynote2 said:
The best, easy and most safe way to fix your problem is to flashing a stock firmware again with odin. Just pull out your battery, put it on again, get in Download mode and flash the Rom with ODIN, let it boot and you will have your phone working again.
Once you get it, download this and extract it until you get a ".tar" file. Put your device in download mode again and flash the tar file. It should be working nice (there could be some random reboots while booting, that's normal for CF-Root process, just wait)
If you can't enter in recovery mode after this, download TWRP for the N910F from here.
Cheers!
Click to expand...
Click to collapse
was going to recommend that way but he pm me saying how did i fix mine as i had same problem so i just replied how i fixed it the way i fixed it lol
strikerdj2011 said:
pull you battery out so phone is off then put it back in and follow this >>> https://www.youtube.com/watch?v=p-zvwUS6as4
Then Follow This >>> https://www.youtube.com/watch?v=azHHB9X15LE
Click to expand...
Click to collapse
i cant reach my phone im stuck in bootloop.
galaxynote2 said:
The best, easy and most safe way to fix your problem is to flashing a stock firmware again with odin. Just pull out your battery, put it on again, get in Download mode and flash the Rom with ODIN, let it boot and you will have your phone working again.
Once you get it, download this and extract it until you get a ".tar" file. Put your device in download mode again and flash the tar file. It should be working nice (there could be some random reboots while booting, that's normal for CF-Root process, just wait)
If you can't enter in recovery mode after this, download TWRP for the N910F from here.
Cheers!
Click to expand...
Click to collapse
you want me to restart to root process? it will not cause the same problem again?
ben.anter said:
i cant reach my phone im stuck in bootloop.
you want me to restart to root process? it will not cause the same problem again?
Click to expand...
Click to collapse
Since your device is international it shouldn't have a locked recovery or something so that makes me think that you did something bad in the process. Reflash the rom and root it with the link I put before. If still doesn't work try to install TWRP with odin too and see if the problem dissapears.
please keep quoting me so my email advices me and I can help you fastly.
galaxynote2 said:
Since your device is international it shouldn't have a locked recovery or something so that makes me think that you did something bad in the process. Reflash the rom and root it with the link I put before. If still doesn't work try to install TWRP with odin too and see if the problem dissapears.
please keep quoting me so my email advices me and I can help you fastly.
Click to expand...
Click to collapse
i did 100% as the tutorial said, maybe the phone is locked or something =/
so right now how do i flash the rom?
i just download firmware from sam mobile customized to israel and install with odin?
http://www.sammobile.com/firmwares/download/39869/N910FXXU1ANK5_N910FOJK1ANK5_ILO/
ben.anter said:
i cant reach my phone im stuck in bootloop.
you want me to restart to root process? it will not cause the same problem again?
Click to expand...
Click to collapse
ben.anter said:
i did 100% as the tutorial said, maybe the phone is locked or something =/
so right now how do i flash the rom?
i just download firmware from sam mobile customized to israel and install with odin?
http://www.sammobile.com/firmwares/download/39869/N910FXXU1ANK5_N910FOJK1ANK5_ILO/
Click to expand...
Click to collapse
Yep, download any firm you want no matter of region, just make sure it is for N910F. Sammobile will download really slow if you don't have paid account so I recommend you to find any mirror for it. Once downloaded, flash it with odin and let it boot!
Did you try the root on Kitkat? the CF-Auto root is not compatible with Kitkat, only lollipop (I also had bootloop when tried on Kitkat).
Download this files and try the root process again (this files are from 20.01.2015):
https://mega.co.nz/#!I90ABAIa!wryhBJ7g1uMqThY3qxzUh54c8SPocd7HWl3sVSOZZII
galaxynote2 said:
Yep, download any firm you want no matter of region, just make sure it is for N910F. Sammobile will download really slow if you don't have paid account so I recommend you to find any mirror for it. Once downloaded, flash it with odin and let it boot!
Click to expand...
Click to collapse
does it matter what version of odin i use?? and i put the md5 rom file in the PDA line?
lnvincible said:
Did you try the root on Kitkat? the CF-Auto root is not compatible with Kitkat, only lollipop (I also had bootloop when tried on Kitkat).
Download this files and try the root process again (this files are from 20.01.2015):
https://mega.co.nz/#!I90ABAIa!wryhBJ7g1uMqThY3qxzUh54c8SPocd7HWl3sVSOZZII
Click to expand...
Click to collapse
my phone version is 4.4.4 android
First get it back to stock
Hi man,
I would first get the phone back to stock firmware by following the guide on this page:
http://galaxynote4root.com/galaxy-note-4-root/how-to-unroot-galaxy-note-4-with-stock-firmware/
Then Root it by flashing TWRP reovery:
http://galaxynote4root.com/cwmtwrp-recovery/
And via TWRP flash SuperSU:
http://galaxynote4root.com/galaxy-note-4-root/how-to-root-galaxy-note-4-using-cwmtwrp-method/
Just follow the instructions and links and you should be fine.
As long as the phone goes into dowload mode you can't really fail this one.
Good luck
Willem1975 said:
Hi man,
I would first get the phone back to stock firmware by following the guide on this page:
http://galaxynote4root.com/galaxy-note-4-root/how-to-unroot-galaxy-note-4-with-stock-firmware/
Then Root it by flashing TWRP reovery:
http://galaxynote4root.com/cwmtwrp-recovery/
And via TWRP flash SuperSU:
http://galaxynote4root.com/galaxy-note-4-root/how-to-root-galaxy-note-4-using-cwmtwrp-method/
Just follow the instructions and links and you should be fine.
As long as the phone goes into dowload mode you can't really fail this one.
Good luck
Click to expand...
Click to collapse
did exactly what he said! thanks for the help! phone working great with root

Please Help Very Frustrated.

hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
dork997 said:
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
Click to expand...
Click to collapse
Akalsemann said:
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Try that
Akalsemann said:
Try that
Click to expand...
Click to collapse
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
vinura kithmal said:
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
Click to expand...
Click to collapse
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
dork997 said:
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Click to expand...
Click to collapse
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
dork997 said:
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
Click to expand...
Click to collapse
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Swimguy14 said:
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
vinura kithmal said:
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Click to expand...
Click to collapse
I followed instructions given earlier to install philz recovery, i opened it by booting into it immediately i selected format for new rom install. after that i am stuck on samsung logo i think the old rom is now deleted. Now i am downloading fresh 5.0.2 UK from sammobile i will download it and try to root it normally with flashing CF ROOT via odin. if it does not work then i will do what u guys said. I dont know if TWRP will work by the same method (booting immediately into recovery) but philz recovery did. And i will also try flashing a prerooted Rom. What i dont understand is that why is this happening in the first place? i had an alpha before i could enter into TWRP normally i rooted it with CF AUTO root normally...no errors or anything why is this happening on my S5? the last owner must have done something weird with it ...i am trying to figure out why is this happening in the first place. Appreciate ur feedback.
I also dont know why this is happening
and yeah
i had all the galaxy S series upto S5 and this the only device that is not rooting with CF-auto root
the latest updates from samsung may have done something i dnt knw
and eralier mentioned method worked 100% for me and i did root my device like that
And last owner may b or may not done anything with it because my device is a brand new and still i had that issue

New S5 SM-G900I need root

Hello,
I need a CF-Auto-Root for an S5 SM-G900I with the build lrx21t.g900idvu1boj1 . I can't find it anywhere though. Is there an updated site with the new links?
Thanks in advance
Just use the one in the CF AR thread
http://download.chainfire.eu/409/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltedv-smg900i.zip
*Detection* said:
Just use the one in the CF AR thread
Click to expand...
Click to collapse
Will it work ok though? I don't want to brick my phone.
nn666 said:
Will it work ok though? I don't want to brick my phone.
Click to expand...
Click to collapse
Depends on the revision of the phone, some work, some don't
If you don't want to risk it, flash TWRP 2.8.7.0 with ODIN, then SuperSU from TWRP recovery
Uncheck the "Auto reboot" setting in ODIN, and pull the battery once it's finished flashing TWRP, then replace the battery, and from a powered off state, boot straight into TWRP (Volume UP & Home & Power) and flash SuperSU
Make sure SuperSU.zip is on your MicroSD card ready to flash
*Detection* said:
Depends on the revision of the phone, some work, some don't
If you don't want to risk it, flash TWRP 2.8.7.0 with ODIN, then SuperSU from TWRP recovery
Uncheck the "Auto reboot" setting in ODIN, and pull the battery once it's finished flashing TWRP, then replace the battery, and from a powered off state, boot straight into TWRP (Volume UP & Home & Power) and flash SuperSU
Make sure SuperSU.zip is on your MicroSD card ready to flash
Click to expand...
Click to collapse
Is there any way of finding out if my revision works before trying it? Google search didn't seem to come up with anything... Thanks for your help also.
nn666 said:
Is there any way of finding out if my revision works before trying it? Google search didn't seem to come up with anything... Thanks for your help also.
Click to expand...
Click to collapse
Not that I know of, and we're not sure which revisions work and don't, just seems that newer S5s have issues with CF

Soft Brick??

Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?
Same issue as well on my sm-g985v Verizon variant
Flashed an update to work out minor lagging bugs and soft bricked my S7. Can access bootloader and recovery. Beyond that, the phone gets there but with black screen and it is sputtering off and on. Tried reflashing stock firmware with odin, and its not taking. Running into a permission error while trying to write the image. Anyone here have any ideas?
sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Feyaad said:
Hi there, I have same issue, have s7 edge sm-G935F stuck at logo. I downloaded 2 different firmware from z3x box(shell) and if keep failing when using odin (latest) and also getting error when using Samsung tool.Also I can't get in the phone menu to check the baseband..can only get model from download model.any advice to this?
Click to expand...
Click to collapse
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
Click to expand...
Click to collapse
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...
sidi adam said:
Hello,
Thanks for your message. I tried everything you said exept that i used odin 3.12.5
But still the black screen...
Click to expand...
Click to collapse
What rom you tried to flash?
Are you on the right bootloader and modem?
Well I have the Odin latest version already..but I can't know which is the correct baseband or county..only the model I know when it's in download mode..
sidi adam said:
Hello all,
Today I updated a custom ROM on my rooted Phone (android 7) . In the aroma installer i select no root. After a good restart i though i root my Phone true Odin. I was thinking it went all good till it was stuck on te Galaxy s7 edge black screen. I couldnt do nothing. After that i was thinking to flash to stock. Every time i try to flash true Odin it give me fail.
Please help me.
Best regards Sidi
Click to expand...
Click to collapse
So you flashed a beta firmware, the name of which you don't feel is necessary information.
OK. Shame I hate popcorn. How about INFORMATION instead?!
LyLu said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...
I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc
Moodruid said:
It was my understanding it was already in the package. Questioning that one now. Where do i look for that? And thank you for responding back. Downloading your first suggestions as i type this...
Click to expand...
Click to collapse
When downloading original firmware there should be 4 files when unzip.
1 for each of the options in Odin, without the last one named home.
Some of the custom roms comes with bootloader and modem, but NOT ALL.
Most times you have to flash the right bootloader and modem in Odin beforehand to get the phone to boot.
Im unsure of what has happened because I have never run into issues myself.
If you can not get the phone to boot with firmware from Sammobile and Odin flash I am out of options.
If I do experience a problem like this I would:
-install bootloader and modem according to the custom rom used. Try and flash these with odin more than ones, if not working.
-if no recovery, try flash recovery again
-try flash another custom rom then another custom rom
-return to stock firmware downloaded trough Sammobile
If none of these options work im out of things to do, sorry
The times I have experienced phone stuck on Samsung logo, it has been because of bootloader and/or modem.
Flashing the right ones have always fixed the problem.
That said, I have never experienced problems with returning to stock firmware trough Odin, maybe one time.
And this time my firmware download was corrupted.
---------- Post added at 06:13 AM ---------- Previous post was at 06:00 AM ----------
sidi adam said:
I have downloaded two non branded firmware for the Netherlands from samdroid. I had unpacked the zip and flashed the files. For the csc selection I put the one named home csc
Click to expand...
Click to collapse
This is wrong, you should use the file named only CSC.
Home_CSC, is to keep your setup on phone as is.
I also remember that you have to remove the meta data directory, and then repack firmware or the install will stop.
And this is also NOT a good option if you use another firmware than the original on phone.
Installing firmware with Odin, always use BL, AP, CP and CSC.
Try this and forget about the Home_CSC.
I don't have anymore info, sorry
Thank you very much. I will try it. I will let you know.
Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,
Moodruid said:
Gentlemen, my appreciations and thanks. Was able to finally get the stock firmware to grab. After more time disecting the problem i learned about and was able to uncover the maintenance boot screen. There it had the option to do usb debug . Once i hit that, next flash finished fully. It must of reser in the dev options after the initial root. Damn, i was sweating balls for a bit thinking i must of hard bricked it somehow. I will take it throufh the toot process later today glitch free i imagine. Thanks again for assisting,
Click to expand...
Click to collapse
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work
LyLu said:
Usb debugging should always be turned ON when flashing..........!
Tis is like common knowledge in here.
Anyway glad things work
Click to expand...
Click to collapse
How will you get to turn on USB debugging when the phone can only booth into download model?
Feyaad said:
How will you get to turn on USB debugging when the phone can only booth into download model?
Click to expand...
Click to collapse
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button
LyLu said:
Buy pressing and holding power and volume down key, until you get to the screen.
Same procedure as download mode, but without the big button
Click to expand...
Click to collapse
OK great..will try it..thank you
luly said:
Is this a 935F? Where did you download the orginal firmware from and what version of Odin u use?
When I root my phone I always use the steps from this thread.
http://forum.xda-developers.com/s7-e...0-0-0-t3334084
Have never run into issues.
Flash twrp trough Odin first, let the phone start
Boot into TWRP, format phone with the options you have to type YES, then install dm-verity force encryption disabler
Now restart TWRP
Then flash the Supersu file from the thread.
Now restart phone
---------- Post added at 10:44 PM ---------- Previous post was at 10:42 PM ----------
Download orginal firmware fro sammobile, unpack and flash with Odin 3.12.3.
Download the firmware from your area, the one that comes with your phone.
Use the right regional code and everything when you download firmware.
Also, have you guys flashed the right bootloader and modem beforehand?
Click to expand...
Click to collapse
Even this thread is old:
Thank you so much, bricked my phone unknowingly flashing custom recovery using a defektive usb port struggling to get it working again. This worked like a charm.
Don´t understand why the orthers did struggle with that method.

Categories

Resources