Hello. I am on a rooted stock Galaxy S4, and I tried to use the OTA update to 4.3. It rebooted, but I am still on 4.2.2. I do have the replacement files to enable tethering. Will that interfere with my update? Is there something else I need to check to install it to get to 4.3? Also, the update is still in the "Cache" folder, but it doesn't show up in my "notifications" any more. Help would be appreciated.
This... Yay~! We finally got the Official MJA Android 4.3 tar file~!! 
Download here:
http://samsung-updates.com/device/?id=SPH-L720
This will make it possible for you to restore back to a clean 4.3 MJA state. It's for use with the Odin software.
-Optimummind
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
---------- Post added at 04:52 PM ---------- Previous post was at 04:49 PM ----------
Try this.. Thanks to Optimummind
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
Is there a way to just use the OTA update? That is what I prefer rather than downloading and installing something that someone has altered.
I can look into it. But whenever I decide to take an OTA ,I usually return to full stock.. Always better to start clean..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
---------- Post added at 04:59 PM ---------- Previous post was at 04:58 PM ----------
And the link i provided will bring you to pure stock. Nothing is altered.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
BIGSAMDA1ST said:
I can look into it. But whenever I decide to take an OTA ,I usually return to full stock.. Always better to start clean..
Click to expand...
Click to collapse
That's what I intended to do. I just wanted to install the OTA for a full, clean install. The phone said it was installing, but when it rebooted, nothing had updated.
danielg5 said:
That's what I intended to do. I just wanted to install the OTA for a full, clean install. The phone said it was installing, but when it rebooted, nothing had updated.
Click to expand...
Click to collapse
Yeah because you're rooted...
Joe0113 said:
Yeah because you're rooted...
Click to expand...
Click to collapse
So, do you mean to say that an OTA update will not work if the phone is rooted? I read in another thread that others have used the Super User "Survival Mode" to keep root and have successfully used the OTA update. Should I unroot? Then, would I be able to use the OTA? Do the tethering files keep me from being able to use the OTA?
danielg5 said:
So, do you mean to say that an OTA update will not work if the phone is rooted? I read in another thread that others have used the Super User "Survival Mode" to keep root and have successfully used the OTA update. Should I unroot? Then, would I be able to use the OTA? Do the tethering files keep me from being able to use the OTA?
Click to expand...
Click to collapse
1. DL and flash stock MF9 recovery AND kernel
1B (optional). Triangle away to make your device "official" and reset your binary counter
2. DL stock MF9 tar
3. Flash it in Odin
4. Accept the MJA OTA; wait for it to DL and install
5. Re-root.
Joe0113 said:
1. DL and flash stock MF9 recovery AND kernel
1B (optional). Triangle away to make your device "official" and reset your binary counter
2. DL stock MF9 tar
3. Flash it in Odin
4. Accept the MJA OTA; wait for it to DL and install
5. Re-root.
Click to expand...
Click to collapse
Where do I find the Stock MF9 Recovery and kernel? I have the stock recovery. Never used CM or anything else on this phone. Where do I find the Stock MF9 tar? Are there specific instructions for using ODIN to flash these? sorry for being dense. I appreciate the help.
danielg5 said:
Where do I find the Stock MF9 Recovery and kernel? I have the stock recovery. Never used CM or anything else on this phone. Where do I find the Stock MF9 tar? Are there specific instructions for using ODIN to flash these? sorry for being dense. I appreciate the help.
Click to expand...
Click to collapse
Everything can be found in "Sprint GS4 Android Development Section" brotha.
danielg5 said:
Where do I find the Stock MF9 Recovery and kernel? I have the stock recovery. Never used CM or anything else on this phone. Where do I find the Stock MF9 tar? Are there specific instructions for using ODIN to flash these? sorry for being dense. I appreciate the help.
Click to expand...
Click to collapse
Perfect example of someone who doesn't search much.
Sent from my SPH-L720 using Tapatalk
danielg5 said:
Where do I find the Stock MF9 Recovery and kernel? I have the stock recovery. Never used CM or anything else on this phone. Where do I find the Stock MF9 tar? Are there specific instructions for using ODIN to flash these? sorry for being dense. I appreciate the help.
Click to expand...
Click to collapse
You are way over complicating this thing. Download the full MJA tar file from sammobile and install it done. The reason why the OTA failed is because you have a modified system file and it will abort when it hits it during the install. Also, OTAs won't work if you have a custom recovery installed. Download the full tar file and install it with odin. It will bring you back to full stock and you will be updated. You will have to re root the phone if you want to with cf autoroot. And the survival mode thing has only worked for a couple of people so don't count on that working. Lastly, you do not need to do a factory reset when you odin the full tar so your data will still be there.
daniel4653 said:
Perfect example of someone who doesn't search much.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
unnecessary, unhelpful, and rude.
danielg5 said:
unnecessary, unhelpful, and rude.
Click to expand...
Click to collapse
One thread has most of your answers on tars. If you couldn't locate the thread of official tars, then I don't know quiet what to say. And that thread plus others explain to you what programs are needed, where to donwload thwm, and a step by step process on how to correctly completed the Odin flashing.
Sent from my SPH-L720 using Tapatalk
I have not gotten any update notification yet and hopefully I won't get that notification.
Related
I am rooted on MF9 and didn't accept ota. Is it possibe to update to MJA keeping MF9 bootloader without doing a clean wipe system/data?
Sent from my SPH-L720 using XDA Premium 4 mobile app
cooldroidxda said:
I am rooted on MF9 and didn't accept ota. Is it possibe to update to MJA keeping MF9 bootloader without doing a clean wipe system/data?
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A little searching would've brought you here: http://forum.xda-developers.com/showthread.php?p=41384294
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
BIGSAMDA1ST said:
A little searching would've brought you here: http://forum.xda-developers.com/showthread.php?p=41384294
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
Click to expand...
Click to collapse
Thank you for taking the time to assist. I've been following that post since it started and always search and read. I don't have access to post the question in that thread but step 5 is the issue. I don't want to perform the complete wipe below. I will if I have to but I wanted to know if there is way to upgrade to MJA with MF9 boot loader without the full wipe.
5. Boot into Philz recovery. Choose "Clean to Install a New Rom for a complete wipe."
cooldroidxda said:
Thank you for taking the time to assist. I've been following that post since it started and always search and read. I don't have access to post the question in that thread but step 5 is the issue. I don't want to perform the complete wipe below. I will if I have to but I wanted to know if there is way to upgrade to MJA with MF9 boot loader without the full wipe.
5. Boot into Philz recovery. Choose "Clean to Install a New Rom for a complete wipe."
Click to expand...
Click to collapse
Oh ok.. I see exactly what you mean..:thumbup:
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
My question is about this thread Here. More specifically, with this quote
To go any further you must have NOT accepted the latest OTA and are still on MF9 Bootloader.
Click to expand...
Click to collapse
I did NOT receive the latest OTA, which i'm guessing is a GOOD thing, but I also never updated to MF9. Hence I'm assuming I still have the MDL bootloader. In that case can I still following these instructions or do I need to find a way to update to the MF9 bootloader before attempting?
Thanks for the help!
scstrato said:
My question is about this thread Here. More specifically, with this quote
I did NOT receive the latest OTA, which i'm guessing is a GOOD thing, but I also never updated to MF9. Hence I'm assuming I still have the MDL bootloader. In that case can I still following these instructions or do I need to find a way to update to the MF9 bootloader before attempting?
Thanks for the help!
Click to expand...
Click to collapse
Well,I personally would update to MF9 then follow that thread to a tee.. But that's just me..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget,8SMS(Stock Messaging,KitKat)
So i updated to MK2 firmware this morning from OTA with my phone running Stock 4.3 MJA. I now realize there's a problem, as it WILL NOT LET ME TURN WI-FI ON. Each time I try, it force switches it off and brings up a KNOX notification saying that the attempt has been blocked. Can anyone tell me if there's a way to get back to the older firmware such as MF9 from MK2 right now? Also, I tried going back to MDC using Odin 3.07 and Odin 1.85, neither worked. Please help.
nivedpersaud said:
So i updated to MK2 firmware this morning from OTA with my phone running Stock 4.3 MJA. I now realize there's a problem, as it WILL NOT LET ME TURN WI-FI ON. Each time I try, it force switches it off and brings up a KNOX notification saying that the attempt has been blocked. Can anyone tell me if there's a way to get back to the older firmware such as MF9 from MK2 right now? Also, I tried going back to MDC using Odin 3.07 and Odin 1.85, neither worked. Please help.
Click to expand...
Click to collapse
You can't.. Once your on MJA that's where you are stuck although I believe you can go from MK2 to MJA but that's about it. Otherwise there is no downgrading to any previous firmwares. Please read through the threads... All answers are here if you read...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
You can't.. Once your on MJA that's where you are stuck although I believe you can go from MK2 to MJA but that's about it. Otherwise there is no downgrading to any previous firmwares. Please read through the threads... All answers are her if you read...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Hmmmm...I'm now on MK2...just hoping there's some way to get back to MJA even. Also, another thing has caught my eye when the phone turned on. Music force closes and sound doesnt work one bit. Is there any way to factory restore the device at the moment with/ without using Odin? Like an MK2 factory reset file?
nivedpersaud said:
Hmmmm...I'm now on MK2...just hoping there's some way to get back to MJA even. Also, another thing has caught my eye when the phone turned on. Music force closes and sound doesnt work one bit. Is there any way to factory restore the device at the moment with/ without using Odin? Like an MK2 factory reset file?
Click to expand...
Click to collapse
You can download MJA here : http://www.sammobile.com/firmwares/
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
You can download MJA here :
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
I tried the link, although their servers are down so I'm unable to download anything from that site. Is the file I have to download a large 1.53 GB file? Also, Sound doesnt work and Music force closes when i try to use it. Do you know of a way to hibernate or kill any knox related processes in the system so that it stops turning my Wifi off?
Download from here
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs/MJA
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
Download from here
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Thanks daniel, I'll download tomorrow afternoon as it is a big file. I'll let you know on this thread if I'm successful with getting back to MJA. :fingers-crossed:
nivedpersaud said:
So i updated to MK2 firmware this morning from OTA with my phone running Stock 4.3 MJA. I now realize there's a problem, as it WILL NOT LET ME TURN WI-FI ON. Each time I try, it force switches it off and brings up a KNOX notification saying that the attempt has been blocked. Can anyone tell me if there's a way to get back to the older firmware such as MF9 from MK2 right now? Also, I tried going back to MDC using Odin 3.07 and Odin 1.85, neither worked. Please help.
Click to expand...
Click to collapse
Negamann WonderROM has a working r26 ROM that he just finished building today with verified MK2 kernel that works with wifi.
BIGSAMDA1ST said:
You can't.. Once your on MJA that's where you are stuck although I believe you can go from MK2 to MJA but that's about it. Otherwise there is no downgrading to any previous firmwares. Please read through the threads... All answers are here if you read...
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
If he didn't take the ota he could of went back. Is that correct? Taking the ota locks the bootloader. If he updated with Odin and Philz recovery he could of keep the mf9 bootloader allowing him to down grade
Love the 90s good times
Waiting for the OP to post back if he was successful in downgrading MK2 to MJA by running the full MJA tar file. I know you can't go back farther than MJA but hoping we can at least downgrade back to MJA if we need to after a failed upgrade or bad ota.
I have downgraded mk2 to mja working fine no Knox flags tripped (still at 0×0). 100% stock everything.
Sent from my SPH-L720 using xda app-developers app
E The Magnificent said:
If he didn't take the ota he could of went back. Is that correct? Taking the ota locks the bootloader. If he updated with Odin and Philz recovery he could of keep the mf9 bootloader allowing him to down grade
Love the 90s good times
Click to expand...
Click to collapse
I actually took the OTA from MJA to MK2. thought it would be a better update since it said that before i installed it. Instead, it causes more bugs on my phone, where i cant use Wifi and even play Music, let alone the fact that no sound plays at all on anything and i can't make a call...as the Phone app freezes when i try to make a call.
chadharrop said:
I have downgraded mk2 to mja working fine no Knox flags tripped (still at 0×0). 100% stock everything.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Please tell me what files you used. because at this point, I just wanna watch a simple Youtube video and call my friends! All of my data (contacts, pics, music) is already backed up on my computer. I don't have Root and i tripped the knox flag once so it says 0x1 which pissed me off
cruise350 said:
Waiting for the OP to post back if he was successful in downgrading MK2 to MJA by running the full MJA tar file. I know you can't go back farther than MJA but hoping we can at least downgrade back to MJA if we need to after a failed upgrade or bad ota.
Click to expand...
Click to collapse
Hey thanks for being great helpers with helping me and my phone troubles...apparently my phone works again! Knox is not blocking my wifi and my sound and Music and Calls and everything is working! I'll post a new thread if any problems arise with this update. But to be honest...stick with MJA guys. Don't go through the same trouble i went through. Too much stress to handle when u can't make a single call or play your fave song or even connect to your beloved Wifi hotspot!
I can confirm that you can downgrade from mk2 to mja as I have done it. They process want difficult at all. Going that OP can get it going and it works out for them.
Sent from my SPH-L720 using xda app-developers app
TheChaseB said:
I can confirm that you can downgrade from mk2 to mja as I have done it. They process want difficult at all. Going that OP can get it going and it works out for them.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Ok one question...when u downgraded, where did u find the file? And did the file wipe your data?
http://www.rwilco12.com/downloads.php?dir=Files/Devices/Samsung Galaxy S4 (SPH-L720)/Stock ROMs/MJA
I used this. It did wipe everything from my phone. I just made sure to back up everything I wanted to save on my sd card using super backup. You can find that on the play store.
Sent from my SPH-L720 using xda app-developers app
I had the same issue with WiFi not working and get the message. (For details: On a Stock rooted S4, Updated the Security policy and then flashed the MK2 modem).
I went to: http://forum.xda-developers.com/showthread.php?p=42954149 and followed the exact instructions to go back to MJA. It worked. I didn't lose anything. Only a ~26mb download.
Hope this helps.
cruise350 said:
Waiting for the OP to post back if he was successful in downgrading MK2 to MJA by running the full MJA tar file. I know you can't go back farther than MJA but hoping we can at least downgrade back to MJA if we need to after a failed upgrade or bad ota.
Click to expand...
Click to collapse
I had the exact same problem as the OP with wifi and KNOX notifications upon toggling wifi. This had to do with a bad update which I believe was a result of rooting my phone. Something is weird with recovery after rooting the phone with cf autoroot as it no longer looks like the stock MJA recovery. So when I manually installed the MK2 update using what I believed was the stock recovery, I experienced serious issues such as what the OP described.
In any case, I used ODIN to flash the MJA tar which restored everything back to normal. Then I used the stock recovery to apply the update zip file and everything went without a problem. Then I flashed cf autoroot with ODIN and again, the recovery looks different from the stock MJA and MK2 recovery, but everything works fine. I did not do a data wipe during any step of the process and have seen no ill effects so far.
So the take home message is, if you rooted the phone ODIN stock MJA or MK2 if it becomes available before applying any future updates manually. Or ODIN a stock recovery file for your current ROM if one is available. KNOX has nothing to do with this. I disabled KNOX and still could not turn on wifi.
What if you have mf9 baseband? Can i down grade from mk2 to mf9 and if so how do I do this?
Sent from my SPH-L720 using XDA Free mobile app
So I am no noob, but I am to this device. I am trying to use Odin to flash back to bone stock (unrooted) and am having some weird issues I have never incurred before. When I flash the stock tar file (got from QBKing77's website) it continually fails no matter what cable, USB port, battery tricks, everything! And yes I have searched the threads but found nothing like my issue exactly.
Here's what I've done thus far:
* 12/14 Bought device at Best Buy Mobile
* 12/14 Rooted using Odin, flashed TWRP Recovery using Odin
* 12/14 Flashed Cyanogen Mod 10.2 (stable build)
* 12/16 Flashed S4 Premium Rom 4.2.2
* 12/17 Attempted to Odin back to stock **FAIL**
What is going on here? If anyone has any info or insight please let me know. Odin has never failed me before.
Thanks everyone.
SoFaKiNgStOkeD said:
So I am no noob, but I am to this device. I am trying to use Odin to flash back to bone stock (unrooted) and am having some weird issues I have never incurred before. When I flash the stock tar file (got from QBKing77's website) it continually fails no matter what cable, USB port, battery tricks, everything! And yes I have searched the threads but found nothing like my issue exactly.
Here's what I've done thus far:
* 12/14 Bought device at Best Buy Mobile
* 12/14 Rooted using Odin, flashed TWRP Recovery using Odin
* 12/14 Flashed Cyanogen Mod 10.2 (stable build)
* 12/16 Flashed S4 Premium Rom 4.2.2
* 12/17 Attempted to Odin back to stock **FAIL**
What is going on here? If anyone has any info or insight please let me know. Odin has never failed me before.
Thanks everyone.
Click to expand...
Click to collapse
I hear ya... Here is a link for some stock roms..
http://forum.xda-developers.com/showthread.php?p=42044738
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
SoFaKiNgStOkeD said:
So I am no noob, but I am to this device. I am trying to use Odin to flash back to bone stock (unrooted) and am having some weird issues I have never incurred before. When I flash the stock tar file (got from QBKing77's website) it continually fails no matter what cable, USB port, battery tricks, everything! And yes I have searched the threads but found nothing like my issue exactly.
Here's what I've done thus far:
* 12/14 Bought device at Best Buy Mobile
* 12/14 Rooted using Odin, flashed TWRP Recovery using Odin
* 12/14 Flashed Cyanogen Mod 10.2 (stable build)
* 12/16 Flashed S4 Premium Rom 4.2.2
* 12/17 Attempted to Odin back to stock **FAIL**
What is going on here? If anyone has any info or insight please let me know. Odin has never failed me before.
Thanks everyone.
Click to expand...
Click to collapse
Could be the fact that your on 4.3 bootloader. You either have to odin mja tar file or mk2 tar file.
Sent from my SPH-L720 using xda app-developers app
Tell us what release your phone is on and what stock rom you were trying to load.
jejb said:
Tell us what release your phone is on and what stock rom you were trying to load.
Click to expand...
Click to collapse
I am on baseband version L720VPUEMJA. I hope that's what you are asking. Again, I am new to this device, sorry.
The Stock ROM I am trying to Odin to is L720/L720VPUAMDC_L720SPTAMDC_SPR (exact tar file on QBKing's website)
I am currently on the S4 Premuim v1.0 ROM 4.2.2.
I want to get back to stock because I may need to return this phone due to some cosmetic issues I am having.
I want to thank you all for helping me, you are all super helpful and cool. I am looking forward to sharing in the coolness of the S4!
That is the reason it keeps failing..Cant go back to older builds.. You're going to need to flash a stock MJA or MK2 build..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
That is the reason it keeps failing..Cant go back to older builds.. You're going to need to flash a stock MJA or MK2 build..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Okay makes sense. So when I find one of those builds, will they be tar files for Odin, and when I do flash it will it unroot and bring my phone completely back to stock with no signs of tampering? BTW, I already used Traingle Away to reset the flash counter. I'm not sure if that even means anything on these devices, but I did it anyway, and it worked great.
THANKS AGAIN BROTHER!!! You are awesome!
Yes sir that is correct,tar files for Odin...Now, you said that there weren't any signs of tampering. Did you check in download mode? If you did truly have MJA installed then you should see something like Knox Warranty Void 0x1...Also if your planning on returning the phone then why not just flash the official MK2 from Sammobile:
http://samsung-updates.com/device/?id=SPH-L720&details=Galaxy_S_4_Sprint
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
That is the reason it keeps failing..Cant go back to older builds.. You're going to need to flash a stock MJA or MK2 build..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
BIGSAMDA1ST said:
Yes sir that is correct,tar files for Odin...Now, you said that there weren't any signs of tampering. Did you check in download mode? If you did truly have MJA installed then you should see something like Knox Warranty Void 0x1...Also if your planning on returning the phone then why not just flash the official MK2 from Sammobile:
http://samsung-updates.com/device/?id=SPH-L720&details=Galaxy_S_4_Sprint
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Yes it does say Knox Warranty void. Are they really going to see that at a BestBuy Mobile Store though? Thanks again :good:
To be honest I dont know if they'd even check.. But im not 100% sure... It's Samsung that would give you a hard time..
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
After going to Sammobile and finding my newest firmware (I realized it was MK5), I flashed it used ODIN and all is well again. Thanks to the people who assisted me as well as they could
silentdeath631 said:
So, yesterday I receieved my new S4 and wanted to install the Google Play Edition rom, well after I flashed the ROM and following all the steps, my phone will no longer boot. Any time I try to flash my "stock" firmware, Odin says "Fail! (Auth)" I don't even know which firmware to use because there is so many and I'm freaking out because everything I seem to be trying is failing. A little help would be appreciated...
Click to expand...
Click to collapse
Sounds like you're trying to flash a firmware other than MJA or MK2. You are most likely on the latest firmware and trying to flash a previous one.Look for an MJA or MK2 and you should be good to go.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
BIGSAMDA1ST said:
Sounds like you're trying to flash a firmware other than MJA or MK2. You are most likely on the latest firmware and trying to flash a previous one.Look for an MJA or MK2 and you should be good to go.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Hey thanks for responding. I have been trying to flash the MK2 firmware over and over again using the newest Odin. I have also gottent he phone working again by loading a stock rom off external_sd, but now my wifi isn't working. I know that's an issue with the Modem not being updated, correct? Everytime I attempt to install the MX2 firmware it FAIL! (Auth). The only thing Odin seems to want to install is custom recoveries. Gladly, I am not bricked, but I did stay home from my first class today to fix my phone Any idea on getting the WiFi working?
ROM I Installed: http://forum.xda-developers.com/showthread.php?t=2586586
(Deodexed)
Unfortunately, I tripped the KNOX Flag, but I'm not worried about my warranty currently because I do know what I'm doing for the most part, except this is my first time rooting/unlocking a phone instead of a tablet so it's much more intricate.
Thanks
Although I'm still on MJA I've heard of people having success by just flashing the MK2 modem. Just look for the modem and flash it with Odin.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
[SOVLED] Wifi not working. SPH-720T on MX5 Update
BIGSAMDA1ST said:
Although I'm still on MJA I've heard of people having success by just flashing the MK2 modem. Just look for the modem and flash it with Odin.
GS4 Stock Rooted MJA 4.3,Philz Touch CWM,HotSpot Mod,Transparent Weather Widget...
Click to expand...
Click to collapse
Dude what I'm saying is I try to flash the MK2 Modem file, but Odin just gives me a "FAIL! (Auth)" error every time.
I also figured out that my phone and Kies is reporting the following:
PDA: MK2
Phone: MK5
CSC: MK2
Is MK5 even a thing???? I'm so confused
UPDATE:
So I didn't realize that I had the SPH-720T so I was trying to flash the wrong firmware, and when I installed the custom rom, my firmwares were mismatched; therefore causing the errors. It's flashing the MX5 PDA file successfully as we speak. I will update further on what happens.
UPDATE 2:
The Firmware installed as it should have and my wifi is indeed working again. Phone is clearly functioning and everything seems to be in order. Now I will never touch my phone ever again until I learn more about the ROMs and compatibility.
silentdeath631 said:
Dude what I'm saying is I try to flash the MK2 Modem file, but Odin just gives me a "FAIL! (Auth)" error every time.
I also figured out that my phone and Kies is reporting the following:
PDA: MK2
Phone: MK5
CSC: MK2
Is MK5 even a thing???? I'm so confused
UPDATE:
So I didn't realize that I had the SPH-720T so I was trying to flash the wrong firmware, and when I installed the custom rom, my firmwares were mismatched; therefore causing the errors. It's flashing the MX5 PDA file successfully as we speak. I will update further on what happens.
UPDATE 2:
The Firmware installed as it should have and my wifi is indeed working again. Phone is clearly functioning and everything seems to be in order. Now I will never touch my phone ever again until I learn more about the ROMs and compatibility.
Click to expand...
Click to collapse
Where did you find that file? Im having the exact same problem but you didnt link the solution ;-/
Erock2k4 said:
Where did you find that file? Im having the exact same problem but you didnt link the solution ;-/
Click to expand...
Click to collapse
Probably shouldn't have revived this dead thread, but since I'm a nice person, here. The mirror sucks. You can wait a few hours and I'll upload it to a better mirror, or sit through the ****ty 150KB/s download speed.
http://true-android.blogspot.com/2013/12/install-vpuamk5-android-43-jb-firmware.html
silentdeath631 said:
Probably shouldn't have revived this dead thread, but since I'm a nice person, here. The mirror sucks. You can wait a few hours and I'll upload it to a better mirror, or sit through the ****ty 150KB/s download speed.
http://true-android.blogspot.com/2013/12/install-vpuamk5-android-43-jb-firmware.html
Click to expand...
Click to collapse
Ive been looking for HOURS! I didnt even know there was a newer MK5 modem and it was driving me insane lol THANK YOU FOR BEING AWESOME!
---------- Post added at 08:13 PM ---------- Previous post was at 07:34 PM ----------
Hey I know the thread is dead, but When you installed the new Modem did you end up having to wipe the current Rom you installed? I was just curious if you got it running on your custom rom with the new modem. Figured Id ask while waiting for the dinosaur download speed. Thanks again!
Erock2k4 said:
Ive been looking for HOURS! I didnt even know there was a newer MK5 modem and it was driving me insane lol THANK YOU FOR BEING AWESOME!
---------- Post added at 08:13 PM ---------- Previous post was at 07:34 PM ----------
Hey I know the thread is dead, but When you installed the new Modem did you end up having to wipe the current Rom you installed? I was just curious if you got it running on your custom rom with the new modem. Figured Id ask while waiting for the dinosaur download speed. Thanks again!
Click to expand...
Click to collapse
I haven't tried because that file isn't the modem its the whole 4.3 rom and boot loader. that's why it's 2.1 GB. I ended up bricking my phone until I found the MX5 firmware. so I have no clue. I'm done messing with Roms until developers start working on the triband version of the S4