Hi everybody,
I have root my note 3 MJ7 rom stock with cf root but i cannot reset the current binary to official in download mode!! for system statut it is ok with wanam but current binary, it is more difficult!!maybe someone can help me?
thank you very much
studywes said:
Hi everybody,
I have root my note 3 MJ7 rom stock with cf root but i cannot reset the current binary to official in download mode!! for system statut it is ok with wanam but current binary, it is more difficult!!maybe someone can help me?
thank you very much
Click to expand...
Click to collapse
You only have bin official if u use urdlv, triangle away does not work for note 3 yet
leave a 'thanks' if i helped
SM-N9005 URDLV 0x0
XDA Developers 4 premium app
Related
Hello guys
There is such an error.
ODIN MODE
Product Name:GT-I9500
Current Binary: Samsung Official
System Status : Custom
What can i do?
Use triangle away, it should reset it to official
Sent from my GT-I9505 using xda app-developers app
benni2903 said:
Use triangle away, it should reset it to official
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Triangle away doesn't support
Check this post
[GUIDE] Unroot/Unbrick, Flash official stock firmware on Galaxy S4 GT-I9500 & I9505
http://forum.xda-developers.com/showthread.php?t=2265477
If this does not work, try also wipe cache and [ reset factory ].
Thanks friend.
I find solution.
I load the firmware by Kies.
Help to upgrade 4.3
HI,
I flashed pre rooted firmware 4.2.2 using ODIN on my Samsung I-9500 4.2.2. Then the status is remain same
Binary : Samsung Official
System : Official.
Then I installed Wanam apk to modify the UI, It asked me to download Xposed framework I grant Super user permission. Once It completed I checked the status
Binary : Samsung Official
System : Custom.
I flashed stock firmware 4.2.2 and did the reset factory reset. Then it changed to
Binary : Samsung Official
System : Official.
My question, Is the hidden binary count or knox counter triggered or not ?
If I updated to stock 4.3 Is the Knox Warranty bit 0x0 or 0x1 ?
Please help me.
I'm in need a help with my Galaxy Note 3 n9005.
I have rooted my Note3 by kingoapp and now, seeing in Odin Mode the CURRENT BINARY was changed to CUSTOM and the KNOX WARRANTY VOID to 0x1.
I know that there is not way to reset the KNOX WARRANTY VOID.
The questions is: When I try do Software Update I get a message that is not possible do Software Update because I have changed my android.
Is still possible change my CURRENT BINARY Custom to Samsung Official? And if it be possible, the Software Update will work?
How can I change my CURRENT BINARY: Custom to Samsung Official?
Thx.
leandroaa said:
I'm in need a help with my Galaxy Note 3 n9005.
I have rooted my Note3 by kingoapp and now, seeing in Odin Mode the CURRENT BINARY was changed to CUSTOM and the KNOX WARRANTY VOID to 0x1.
I know that there is not way to reset the KNOX WARRANTY VOID.
The questions is: When I try do Software Update I get a message that is not possible do Software Update because I have changed my android.
Is still possible change my CURRENT BINARY Custom to Samsung Official? And if it be possible, the Software Update will work?
How can I change my CURRENT BINARY: Custom to Samsung Official?
Thx.
Click to expand...
Click to collapse
you can change it with wanam dont know if it will do Software Updates
Binary custum can be reset by flashing stock
System statzs by wanam exposwd
Knox warranty cant be reset
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Binary custum can be reset by flashing stock
System statzs by wanam exposwd
Knox warranty cant be reset
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
ALL of this, and my advice, READ a whole lot more before you change stuff on your device.
note 3 current binary: custom
hi
i updated my galaxy note 3 sm-n9005 lte to lollipop using the firmware on sammobile.com
my phone works
but when i try to boot in recovery mode it writes this on the screen:
current binary: custom
system status: custom
knox warranty void: 0x0
how can i bring back my system status and current binary to official?
please help me
farshidnsattari said:
hi
i updated my galaxy note 3 sm-n9005 lte to lollipop using the firmware on sammobile.com
my phone works
but when i try to boot in recovery mode it writes this on the screen:
current binary: custom
system status: custom
knox warranty void: 0x0
how can i bring back my system status and current binary to official?
please help me
Click to expand...
Click to collapse
Wipe cache and dalvik 3 time then reflash the stock lollipop from sammobile and wipe egain!
jemis1983 said:
Wipe cache and dalvik 3 time then reflash the stock lollipop from sammobile and wipe egain!
Click to expand...
Click to collapse
thanks for your message
how can i wipe cache?
since my phone doesnt boot in recovery mode
what is dalvik?
Hello
I have some questions about knox ,and i hop somebody could help me with answers
first of all i'm on 4.3 MJ7
1- is there any way to root / downgrad / flash recovery without trip knox ??
2- how knox exactly works ?? i mean like if i root it will be 0x1 then i flash recovery it will be 0x2 then i flash any rom 0x3 and cointing with every rom or flash in recovery/odin ?
3- what is 0x0 , i mean each zero stands for what ??
4- i plan to flash carbon after my finals , do you advise me to upgrade to official kk first or no ?
and please can any one point for me a topic about how to root / flash recovery guide ?? i'm i noob in samsung feild , use to have sony phones
thank you very much and i really apreaciate who answer me
Sent from my SM-N9005 using Tapatalk
RaDi said:
Hello
I have some questions about knox ,and i hop somebody could help me with answers
first of all i'm on 4.3 MJ7
1- is there any way to root / downgrad / flash recovery without trip knox ??
2- how knox exactly works ?? i mean like if i root it will be 0x1 then i flash recovery it will be 0x2 then i flash any rom 0x3 and cointing with every rom or flash in recovery/odin ?
3- what is 0x0 , i mean each zero stands for what ??
4- i plan to flash carbon after my finals , do you advise me to upgrade to official kk first or no ?
and please can any one point for me a topic about how to root / flash recovery guide ?? i'm i noob in samsung feild , use to have sony phones
thank you very much and i really apreaciate who answer me
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
1 cant downgrade
2 knox will stay at 0x1 flash as much as you want will stay
3 dont know
4 no if you upgrade to to kk at the moment you will not be able to flash carbon so stay on 4.3
http://forum.xda-developers.com/showthread.php?t=2466423 root with this knox 0x1 flash with odin
http://forum.xda-developers.com/showthread.php?t=2567283 flash this cwm with odin
http://forum.xda-developers.com/showthread.php?t=2630134 then flash carbon with cwm
and your good to go
thank you very much bro , you give me just exactly the informations that i asked for , thank you
Sent from my SM-N9005 using Tapatalk
0x0 means that the warranty hasn't been tripped, 0x1 means it has.
It's using the binary system, 0=no, 1=yes.... Other numbers not used....
ah , ok .. so the the first zero "0"x0 , deosn't change or mean anything ?
Sent from my SM-N9005 using Tapatalk
Hi want to go from 4.3 to 4.4
Knox still 0x0...Rooted via urdlv
any guidance... want xnote ROM so bootloader is very vital... um in UK...CSC-btu
Thx
Sent from my SM-N9005 using Tapatalk 2
edit... wrong post
ddogishere said:
Hi want to go from 4.3 to 4.4
Knox still 0x0...Rooted via urdlv
any guidance... want xnote ROM so bootloader is very vital... um in UK...CSC-btu
Thx
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
With a lot of care and preparation you can go from stock 4.3 rooted to stock 4.4 rooted and keep knox 0x0 by using Mobile Odin Pro - read that specific thread, KitKat stuff + bootloader starts around here:
http://forum.xda-developers.com/showthread.php?p=49452031#post49452031
Going from rooted 4.4 to xnote might be more tricky in regard to knox 0x0, about this one ask directly in the xnote specific thread(s) - eventually if it can be done with Mobile Odin Pro (and using stock kernel and recovery) the knox flag could survive - but I did not follow the subject at all so I could be wrong.
xclub_101 said:
With a lot of care and preparation you can go from stock 4.3 rooted to stock 4.4 rooted and keep knox 0x0 by using Mobile Odin Pro - read that specific thread, KitKat stuff + bootloader starts around here:
http://forum.xda-developers.com/showthread.php?p=49452031#post49452031
Going from rooted 4.4 to xnote might be more tricky in regard to knox 0x0, about this one ask directly in the xnote specific thread(s) - eventually if it can be done with Mobile Odin Pro (and using stock kernel and recovery) the knox flag could survive - but I did not follow the subject at all so I could be wrong.
Click to expand...
Click to collapse
I do know MOP will flash custom roms... However, if the recovery or kernel is changed from stock, Knox is triggered...
Thank you all for your help. Appreciated it.
Sent from my SM-N9005 using Tapatalk 2
Hello everybody
This is my first thread here in XDA
I've installed 5.0 Lollipop Beta in my N9005 and it works snappy and fast. I've used this build for 3 or 4 complete cycles of battery and it really works very well. Now i've decided to install TWRP an SuperSU to delete some bloatware and in download mode I can see a new number in my Knox 0x1 counter (see pictures attached).
Anybody can explain to me what does it mean? Really it doesn't matter so much to me cause I've tripped my Knox from day one but I didn't know about this kind of counter
Any thoughts?
(sorry for my english)
Nothing on hard or software. Because you flashed a custom recovery you got 0x1 knox. You no longer have warrenty on your device....
Sent from my SM-N910C using XDA Premium 4 mobile app
TonyM77 said:
Nothing on hard or software. Because you flashed a custom recovery you got 0x1 knox. You no longer have warrenty on your device....
Sent from my SM-N910C using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My friend I had 0x1 on JB and KK and now I have 0x1 (2) can you see the diference?
Have you flashed that Lollipop beta with odin and using pit?
I think this is all about new bootloader
I have a 3 there lol, still no warrenty left
Sent from my SM-N910C using XDA Premium 4 mobile app
---------- Post added at 05:46 PM ---------- Previous post was at 05:45 PM ----------
I flashed maybe 25 roms total, had different boatloaders, flashed much baseband etc...
Sent from my SM-N910C using XDA Premium 4 mobile app
Ok I can confirm if you flash a 4 archives KK rom using Odin you "revert" to Knox 0x1
:laugh:
I got the 5.0 TW flashed with odin, used pit and updated bootloader.. I still have 0x1
New flash counter i guess someone alert @Chainfire
I think it's the old "Custom Binary Download" counter that first appeared in the Galaxy S2 (if I'm not wrong). Someone should try Triangle Away to reset that counter. However, 0x1 will still remain active .
Edit: This is what I'm talking about.
Super-Veloce said:
I got the 5.0 TW flashed with odin, used pit and updated bootloader.. I still have 0x1
Click to expand...
Click to collapse
This counter only gets started when you try to root or install recovery with Lollipop bootloader.
ionutzm05 said:
I think it's the old "Custom Binary Download" counter that first appeared in the Galaxy S2 (if I'm not wrong). Someone should try Triangle Away to reset that counter. However, 0x1 will still remain active .
Edit: This is what I'm talking about.
Click to expand...
Click to collapse
I think this is not that kind of counter my friend. I've try to reset it with latest version of Triangle Away and it have broke my system. The only solution is to install and comebak to 4.4.2 again. Please don't try that until @Chainfire gets an answer.
Segamalaga said:
This counter only gets started when you try to root or install recovery with Lollipop bootloader.
Click to expand...
Click to collapse
I have flashed a custom recovery and after that superSU 2.42
I had 0x1 before I flashed 5.0 TW with odin..
And before that I had temasek unofficial cm12 (and before that many other roms)
Super-Veloce said:
I have flashed a custom recovery and after that superSU 2.42
I had 0x1 before I flashed 5.0 TW with odin..
And before that I had temasek unofficial cm12 (and before that many other roms)
Click to expand...
Click to collapse
Please answer this simple question:
In any moment did you installed Lollipop's bootloader?
Did you install the rom with .pit in Odin?
Segamalaga said:
Please answer this simple question:
In any moment did you installed Lollipop's bootloader?
Did you install the rom with .pit in Odin?
Click to expand...
Click to collapse
Yes I used PIT and Yes I updated the lollipop bootloader
This is how I flashed the 5.0 Touchwiz
And you don't have root and recovery, do you?
hi ! any news about (2) knox counter ????
It's a new sort of Knox counter included in new Lollipop's bootloader. Right now you can come back to KK's one and it dissapears.
OK thanks ! I will return to 4.4.2 to see !!! ) Latest 4.4.2 or any 4.4.2 with bootloader ???
amosolidu said:
OK thanks ! I will return to 4.4.2 to see !!! ) Latest 4.4.2 or any 4.4.2 with bootloader ???
Click to expand...
Click to collapse
reflashed 4.4.2 gn2 with bootloader and guess what???? nothing ....still knox warranty 0x1 (2)
You need to flash a 4 archives +pit rom. It worked for me
Segamalaga said:
You need to flash a 4 archives +pit rom. It worked for me
Click to expand...
Click to collapse
it worked now after i format everything from twrp (firmware,modem......) and flash single file firmware (FNG2 I USE ) !!! thanks anyway