OzVGA is totally killing me. I have spent hours trying to make mu ozVGA setting work, but bloody thing is just do small.
After applying the VGA .dll's WHAT OZVGA SETTINGS DO YOU USE???
When i switch from seVGA to ozVGA things just go crazy small.
WHAT'S WRONG???
in oz im using these settings
1200 not bold
1350 not bold
19
19
19
750,900,975,1200,1500
The font arrays relate to the text size slider in the screen settings
I'm using the same font sizes for true VGA and for the qVGA-mode. It means that fonts are small on the screen but oh so beautiful! Larger font sizes just made certain things look ugly, which kinda defeated the purpose of switching to VGA, IMHO.
I guess it depends what you're using your Universal for. Most of the apps I'm using allow me to scale their fonts so when I need larger fonts I can have them. Only the Microsoft apps have unscalable fonts...
Make sure you have the text size set to medium in the Screen control panel applet. I found that it helps to turn Cleartype OFF as well.
And I wear glasses
what about phone app, myne goes all funny, and very small. I can barely see numbers, and the whole keypad just stays at the corner of the screen. that,s abir annoying.
and I think I will have to wear glasses very soon with text size like that.
svyatko - this is all being discussed in the other thread, with suggestions for replacements etc...
V
When I say big I meant to say 16x16 or 32x32 whatever is the average size I keep seeing on all those nice themes and WM5 based PDA phones...
Is there some kind of plug in or how I do it...?
I am sorry I'm a noob - but anyone willing to help me? Thank You!!!!!!!
Tnx
Try reading the iPhone threads and see how they're implemented...
Generally claunch or wisbar...
V
For big icons, you could also try iLauncher, PocketPlus, and... didn't somebody else just release a new tab launcher?
As vijay noted, the fanciest screens are pretty much gonna be using Wisbar or claunch.
go to screen settings, ie for stylus setup, then youll see text size!
i can't set icon size over 32px with cLauch
it's too bad. any solution ?
try rlToday
rassen said:
i can't set icon size over 32px with cLauch
it's too bad. any solution ?
Click to expand...
Click to collapse
The icon itself can't be over 32 pixels, but you can set the actual size of the icon on the screen larger than that. However, you *may* lose some resolution in doing that.
I use claunch too. Its simple and very usefull application. bravo maheri, kar tako naprej. Keep on, maisters.
newbie2 said:
The icon itself can't be over 32 pixels, but you can set the actual size of the icon on the screen larger than that. However, you *may* lose some resolution in doing that.
Click to expand...
Click to collapse
i see.
so then, no more solution it's simple same cLaunch?
i don't like wisbar.
any simple software like cLaunch can make my PPC like iPhone
Yes. All you need is cLaunch. Keep your maximum icon size at 32 and then set the icon size you want on the screen. I've seen some good results with icons as large as 48 on the screen. I personally set my icon size on the screen for 36 -- but that's only due to how I want it to end up looking with a set number of rows and tabs.
newbie2 said:
Yes. All you need is cLaunch. Keep your maximum icon size at 32 and then set the icon size you want on the screen. I've seen some good results with icons as large as 48 on the screen. I personally set my icon size on the screen for 36 -- but that's only due to how I want it to end up looking with a set number of rows and tabs.
Click to expand...
Click to collapse
so, the quality is bad.
i think good icon size for iPhone theme is : 42 x 42 pixels.
I just mail to cLaunch author, but have no response.
perhaps i'll switch to this solution:
http://forum.xda-developers.com/showthread.php?t=302739
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
??????
Great Idea. I like claunch because of its small siZe, but I don't use it because of the small Icons. Tried the prog and it doesn't work. Icons remain at 32 even after I resized them. I can tell they are larger because it only shows a portion of it. Is there a setting somewhere that I'm missing?
Got IT
OOPs figured it out. Works Great. Thanks
_craig said:
cLaunch is GREAT, but unfortunately it doesn't handle icons larger than 32x32 pixels all that well. I wanted to create a bunch of big 48px photo shortcuts (32 was just too small!). However, even with a 48px bitmap, cLaunch just crops to 32px and scales up to 48px. Results are not what I wanted, and ugly.
So I created a hacked up version of cLaunch (based on version 12.04, 11 Jan 2008) and I called it cLaunch_48px. It works just like the normal cLaunch does... The only difference is apparent if...
you set the icon size to 48 AND
have a 48px bitmap file as the icon
...it WILL show the entire 48px bitmap, without distortion. Your icon size should be set to exactly 48px in cLaunch, otherwise you will see the regular cLaunch behavior. Note: You can still use any size icons you want, you'll just get the default behavior. For example, I have one tab with 32px icons and another with 48px.
To use: download the CAB and install as normal. It can even coexist with an existing cLaunch installation. This version will share settings with any existing cLaunch installation so you won't need to do anything special to import. You do not need to remove your existing cLaunch, if you have it installed already. Use at your own risk so backup your \Windows\cLaunch.dat file just to be safe.
To hack--experts only: Source code included as zip (project/solution file is VStudio 2008). The only file changed from the original is main.cpp, included in zip (other than vstudio project files). FYI: If you want, you could create an even bigger version (such as 64px) modeled after this version (diff main.cpp with the original cLaunch 12.04 version)... I didn't do that here for two reasons (1) I didn't want 64px icons and (2) supporting both 48px AND 64px icons would use up too much memory.
If I get a chance sometime, I might actually provide a screenshot, but it won't look much different than a typical cLaunch screenshot, expect for nice and clear 48px icons.
Works great with go2contact (created by me).
Also, SUPER THANKS to the creators of cLaunch!
Click to expand...
Click to collapse
Hi craig,
good job. Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
cheers
kuifje
kuifje_xda-developers said:
Would you by any chance have an idea why claunch 1204 would show only a quarter of the icons (and what's worse, only a quarter of the setup menus) on VGA (x51v)?
Do you think there's anything to be done about it? I like claunch 1203 but there the icons are shown with pixel doubling and therefor very coarse.
Click to expand...
Click to collapse
Don't know much about 12.03 and what changed with 12.04. However, with 12.04, from what I could tell by the code: it's best to use 16 and/or 32 px icons/bitmaps (or 48 if you're running cLaunch_48px) and show them at their native size. Otherwise, scaling/cropping will occur.
craig,
I am only using this for shortcuts to regular apps with their own built-in icons. I suppose they are 32*32.
When I set the icon size to 16*16, i see the icon in normal resolution but only the upper left quarter of it.
When I set the icon size to 32*32 I still see only a quarter, but now with pixel doubling, instead of the whole icon in normal resolution. When I set the icon size to 64*64 I see the entire icon, with pixel doubling, but distorted at the bottom.
Also, the upper left corner of the icons is shown in the setup screen, and of the settings and options dialog (and ONLY those), only the upper left corner is shown (this makes it impossible to configure the settings, but I can still do that through claunch 1203 which I have installed also.
can you see anything VGA-related in the code?
Kuifje
I have installed the CAB file but when I go to change the icon size to 48, the icons appears tiled on my today screen. The icons are 32*32 and tiled in the allowed 48 icon size. Do I need to make changes to additional settings??
Hi,
I have a freshly purchased Ipaq 214, and i use to use Claunch on my Asus620.
the Ipaq is VGA, and i have same behaviour you mention, ie can only see quater of the configuration menu... which does not really allow to tweak the interface, and finally makes it unusable!
not to be too particular, but 48 point is too large. can you hackup another version that accept 36-40 pixel? thank you so much if you could.
cLaunch Settings
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
vincej said:
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones...
Click to expand...
Click to collapse
I'm having the same problem and I'm pretty sure that it's the touch pro has the TFT 480 x 640 px and the Mogul was 240 x 320 px (Half) I don't know much but I'm sure thats the problem. I'm having this same issue with a few of my old apps (Skyfire, Music ID, Claunch) I'm bummed Can anyone offer a tweak or solution?
bump please make a vga version
Pls a VGA Version.
It don´t runs in my new HTC TOUCH HD
Many thanks,
Omnia qvga it does not work
It looks nice, but when I set the setting for icons to 48 icons are tiled. It does not show the full 48x48 icon when set to smaller size. I have not the tools to do it myself. Thanks for any help.
vincej said:
I am a little slow on how these things work outside of loading them and adjusting the settings so this could be me being dense, but I am hoping someone can help.
I just went from a Touch to a Touch Pro and when I loaded cLaunch it is tiny on the screen. When I go into the settings the left side of the screen has some info, and on the right some of the tabs are there but cut off, and I can't get to the other ones.
I have tried the version above as well as 12.03 (which says it is not a valid pocket pc app and can't be loaded) and 12.04. I have loaded cLaunch.dat into the windows folder and see my shortcuts on the screen but they are very, very small.
Is this a setting I need to change? I have been through all the settings I can think of. I love this app and would appreciate any help anyone can give me to make this work.
Click to expand...
Click to collapse
Hello
I'm new on this forum and would like to confirm exactly the same problems on my HTC Touch HD.
I've been using this software for years on my old MIO, but I must now move to another soft for my HTC.
Like other people in this thread, I really would like to come back to Claunch.
Any chance to get it upgraded ?
Many thanks for that wonderfull software.
I would like to have Claunch size 64
Hi,
I am very happy with Claunch size 48, but it would be better en size 64 : the friend of my mother had an AVC and he can't speak.
I put pics and shortcut to .mp3 : when he clic on one pic, the pocket PC read a little sentence.
He can use it in size 48, but it would be easier in size 64.
Many thanks for that wonderfull software.
Excuse my bad english, I am french....
Chantal
vga screen
it doesn't work with vga screen .. ie v900
it would be kind if it was possible to make it working for vga screen
many thanks
plus 1 on this if anyone can make a higher res icon version for wvga
would like to try this on the HD2 but icons are only a quater size with this version.
Can you get exe instead of today's plug in?
What i mean can we also jave claunch.exe which can be excuted from PPC as stand alon application instaed of today's plugin
Hi,
When you are using HTC Sense UI and is "moving" (long-press then drag) an item in the home screen, you will see some kind like "cell" (green rectangle).
Do you know the size of this cell in pixel? for screen size 800x480.
Thanks.
If you can see the cells you should be able to use basic math to get the cell size. vRes/#vCells and hRes/#hCells
There is notification bar and the bottom part of the Sense UI which I dont know the size.
Mast3rpyr0 said:
If you can see the cells you should be able to use basic math to get the cell size. vRes/#vCells and hRes/#hCells
Click to expand...
Click to collapse
Check this : developer.android.com/guide/practices/ui_guidelines/widget_design.html
I recently put Android on my dad's hd2 and he is loving it. The only issue is that he is having a hard time seeing some of the text and icons. Anyone know of a way to sacrifice some screen real estate for easier readability? Thanks
Nierika said:
I recently put Android on my dad's hd2 and he is loving it. The only issue is that he is having a hard time seeing some of the text and icons. Anyone know of a way to sacrifice some screen real estate for easier readability? Thanks
Click to expand...
Click to collapse
Try LCD Density Changer from Marketplace.
you can edit build.prop and change the lcd desity value, default is 240