Running CM10.2 nightly and want to try out the Paranoid Android found on the original development thread. Flashing does not work with TWRP (actually lead to a brick, but i'm back ). So getting CWM from TWRP usually with any other devices I own I would install rom manager then install recovery and it would overwrite the existing recovery...Well with the G2 (vzw) it just boots up into TWRP again. Is this do to the not fully unlocked bootloader? How do I install a .img file? Thanks in advanced
CleverUsername13 said:
Running CM10.2 nightly and want to try out the Paranoid Android found on the original development thread. Flashing does not work with TWRP (actually lead to a brick, but i'm back ). So getting CWM from TWRP usually with any other devices I own I would install rom manager then install recovery and it would overwrite the existing recovery...Well with the G2 (vzw) it just boots up into TWRP again. Is this do to the not fully unlocked bootloader? How do I install a .img file? Thanks in advanced
Click to expand...
Click to collapse
Ummmm. I may be wrong but this could be because that build is not for our device. Are you talking the vow original dev thread or the lgg2 original dev thread(multidevice)
Sent from my LG-VS980 using Tapatalk
jonesin said:
Ummmm. I may be wrong but this could be because that build is not for our device. Are you talking the vow original dev thread or the lgg2 original dev thread(multidevice)
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
I got it to work....I found a flashable CWM zip. But yea there are 2 different Paranoid Android builds for the vs980. One's in the Original Dev Thread (multidevice) and one's in the vs980 thread. But thanks
Can you post that zip or a link please
Sent from my LG-VS980 using Tapatalk
jonesin said:
Can you post that zip or a link please
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23212708291674701
Related
Quick question i got a i337 and have been flashing rom since i got this phone about 3 months. last time i flash a rom and everytime i plug my phone to the PC its read my phone as a M919 Tmobile device but everything work fine beside that. What could have cause this and what can i do to fix it? Thanks
Did you flash a custom rom from Tmobile by chance?
Nope just been flashing rom on our ATT forums but some were ported from the Tmobile.
Overgloc said:
Nope just been flashing rom on our ATT forums but some were ported from the Tmobile.
Click to expand...
Click to collapse
bingo, that is it, ported tmo rom to att. No biggie, does that keep you from doing anything you need?
TheAxman said:
bingo, that is it, ported tmo rom to att. No biggie, does that keep you from doing anything you need?
Click to expand...
Click to collapse
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
doktor buknasty said:
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
THIS!! I did install recovery thur GOO. What can i do to fix this?
Overgloc said:
THIS!! I did install recovery thur GOO. What can i do to fix this?
Click to expand...
Click to collapse
You can manually download TWRP from their website and install it using the "dd" command in a root terminal or root adb shell. It's a bit more hands-on, but in the end you just run a command or two. Instructions are on TWRP's website, and are specific to each phone. WARNING: If you do end up flashing a recovery via this method, be 100% sure you selected the right phone on TWRP's website, and be 110% sure you get the partition number right at the end of the "dd" command. Flashing the recovery to the wrong eMMC partition could easily result in a hard brick. (basically, just follow instructions and you'll be fine).
doktor buknasty said:
The only I see that could get affected is updating TWRP thru Goo Manager. TWRP will give the T-Mobile version instead of ATT.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Ahh, yes, goo will install the TMO version, you need to use the flash att version in the Dev att forum.
Aou maybe right, that might be the only way, I didn't find the flash version....you could try this..
http://goo.im/devs/s0updev/goomanager
http://forum.xda-developers.com/showthread.php?t=2314494
Flashable twrp zip in post #2
xBeerdroiDx said:
http://forum.xda-developers.com/showthread.php?t=2314494
Flashable twrp zip in post #2
Click to expand...
Click to collapse
I have been out done. I forgot you had that in your guide. have me banned for a few days for not following procedures.
Hilarious
Thanks for all yall help guys!! will try and report back.
Just change the data in build.prop to i337. Problem solved
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
DireArcticWolf said:
I have been trying to flash CM11 to my G2(Tmo) but the problem I am running into is that no matter what tut I follow I end up with the same result. Fail. I have attached a pic of my screen if that helps. I have TWRP v2.6.3.2 installed and everything but install runs fine. The error that comes up on the install screen is "E:Error executing updater binary in zip '.........'. I am a noob to flashing/roms sorry If more information is needed just let me know.
Thanks.
Click to expand...
Click to collapse
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
thanks
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
Thank you sssoooooo much, after a week of pulling my hair out I am happy to say I now have CM11 on my G2.
flutterguy317 said:
To flash CM11 and most kitkat roms, you'll need to update TWRP. The most up-to-date version for the D801 (T-Mobile G2) is v2.6.3.5, which can be found in the CMB thread under G2 Android Development (T-Mobile): http://forum.xda-developers.com/showthread.php?t=2568732 . The update is a flashable zip, so download it to your phone, reboot to recovery, and install it using your existing TWRP. After a reboot into recovery you should be updated, and you should be able to flash CM11.
Click to expand...
Click to collapse
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Plain Water said:
I'm having a similar problem on my d802. I will go and try. Thank you for this answer!
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
markula78 said:
Have the same problem. But cant find out what the newest twrp is. i have now 2.6.3.2. But cant find 2.6.3.5. I found one 2.6.3.3 but when i try to push it just imput file is not a loki image.
Can you please find TWRP version that works with mine g802 and cm11 ?
Thanks
Click to expand...
Click to collapse
I just download the Freegee app ant updatet to 2.6.3.3 and it work, if any other with LG 802 have problems.
Good to know. Thanks for the post.
Sent from my LG-D801 using XDA Premium 4 mobile app
I'm currently running CM11 (02-07) with ART enabled. I'm thinking of upgrading to the current nightly, but I'm not sure if I need any special steps with ART.
I will be flashing the ROM manually because I need to modify the device number, so I'll probably be doing a reset before, which will of course reset back to Dalvik and remove all my apps.
Now my quesion is, can I backup my apps and user data while in ART with Titanium, and then restore them in Dalvik? I'm thinking of keeping Dalvik so I can flash stock remote and camera.
Thanks,
Vic
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
victorbrca said:
Did a Titanium backup, clean install and everything is ok. ART is good, but I'm happy to be able install the remote and camera, and maybe try xposed framework.
Click to expand...
Click to collapse
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
AndroidNoobeee said:
How did you get CM11 to flash on your wind variant g2. When I flash it fails. Its also says no MD5 file found. Please Help.
Click to expand...
Click to collapse
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
victorbrca said:
Here.
http://forum.xda-developers.com/showthread.php?t=2611749
Sent from Tapatalk.
Click to expand...
Click to collapse
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
AndroidNoobeee said:
I followed the guide. But when I flash CM it fails. Do need certain kernel or something? What am I doing wrong? Also I have the wind variant if thats important.
Click to expand...
Click to collapse
How did you flash recovery?
Sent from Tapatalk.
victorbrca said:
How did you flash recovery?
Sent from Tapatalk.
Click to expand...
Click to collapse
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
AndroidNoobeee said:
I flashed twrp v2.6.3.2 through flashify. I realize this isn't the most updated version of twrp for my g2 but when i flash the updated vesion (v2.6.3.4) it fails.
Click to expand...
Click to collapse
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
victorbrca said:
I would go to the thread and ask for help. Also paste the error you get when you try to flash CM11.
Sent from Tapatalk.
Click to expand...
Click to collapse
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
AndroidNoobeee said:
I noticed you are using a furnace kernel,Did you flash CM11 with stock lg kernel? If so what version of twrp did you use. I don't understand the problem because I have the dame model as you.
Click to expand...
Click to collapse
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
victorbrca said:
Again, post back at that other thread with the details of what you did and what error you are getting. The more detail you can give the more we can help.
In a nutshell, the recovery that you install will dictate what ROM will work on your device. For some of the ROMs in that thread you will need to install a kernel, but that depends. And I'm not sure what error you are getting.
Sent from Tapatalk.
Click to expand...
Click to collapse
It won't allow me because the thread is only for developers.
I am experiencing installing abortion problems and error status 7 while installing the omni rom 2.1 and flex rom. I am currently using the phiz recovery. Anyone has any idea how to solve the problem?
Sent from my LG G2 using Tapatalk
bump
Sent from my LG G2 using Tapatalk
which g2 model do you have also what rom are you currently running/if on stock what firmware and version of philz are you running?
XxZombiePikachu said:
which g2 model do you have also what rom are you currently running/if on stock what firmware and version of philz are you running?
Click to expand...
Click to collapse
I am using the d803 model. I am currently running omni 2.0 rom. I have tried all verison of phiz recovery and still receiving the same error.
Sent from my LG G2 using Tapatalk
well as I don't have this model I can't be of much help but while looking through the omnirom thread there are very few people who use philz and in the flashing procedure it suggest you us twrp or philz so you might want to try with a different recovery and maybe the results will be different, good luck :fingers-crossed:
XxZombiePikachu said:
well as I don't have this model I can't be of much help but while looking through the omnirom thread there are very few people who use philz and in the flashing procedure it suggest you us twrp or philz so you might want to try with a different recovery and maybe the results will be different, good luck :fingers-crossed:
Click to expand...
Click to collapse
Do u have a flashable zip for the twrp recovery for the d803 model
Sent from my LG G2 using Tapatalk
Edward Zhuang said:
Do u have a flashable zip for the twrp recovery for the d803 model
Sent from my LG G2 using Tapatalk
Click to expand...
Click to collapse
I don't but ive looked around and found this http://forum.xda-developers.com/showthread.php?t=2449679, if your is the rogers d803 than you shoud be able to flash it
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
lootrooter said:
Can any one help me try to get cm11 on my verizon note 3. I have TWRP and Unlocked Bootloader with root running CM13 but I still want to run cm11 and when I tried to flash the rom, it gave me a updater 7 error. If you know a way to fix this please tell me.
Click to expand...
Click to collapse
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
bftb0 said:
Error 7 is typically a mismatch condition between the fingerprint of the recovery in use and the model of the phone the ROM is intended for - the ROM author puts an "assert" statement in the installer script to prevent dummies from flashing a ROM from the wrong device to a phone.
Assuming you didn't make a mistake downloading the wrong cm rom for the SM-N900V Note 3 this could be a "hlte" vs "hltevzw" issue depending on which TWRP version you have installed.
You can work around this by unpacking the ROM .zip file, deleting the offending "assert" line in the installer script, and red zipping the ROM.
Click to expand...
Click to collapse
It was just a "hlte" vs "hltevzw" error, thanks
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Old 4.4 rom on new vzw bootloader
bishop0114 said:
Did you get CM11 working?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
how to install
themrgoats said:
I did and c-rom. Which i love. But with both of them lte data goes in and out. I've tried a bunch of things but can't figure it out. It's weird editing apns causes them to be deleted. Any ideas anyone?
Click to expand...
Click to collapse
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
dat ka said:
can tell me how did u installed it? i am getting ERROR : 7 in TWRP , cm-11-20160612-NIGHTLY-hltevzw.zip (223.82 MB)
Rooted 0B6 then Unlocked Bootloader.
Click to expand...
Click to collapse
TWRP error 7 typically means you're trying to install the zip onto the wrong device.
Sent from my SM-N900V using Tapatalk
Yes if you are using the hltevzw twrp then just flash the hlte generic twrp and u can flash roms that don't require the hltevzw twrp to see the right rom is version is being flashed.
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
dat ka said:
One more question , i am running JasmineRom its 5.0.x CM 11 is 4.x.x Will it work? if i install it?
Click to expand...
Click to collapse
I don't think so but was wondering since we have an unlocked bootloader, can we downgrade to a developer 4.4.2 rom and then install the cm11?
Sent from my SM-N900V using Tapatalk