[Q] How extract the PIT file on Note 3 32GB ? - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi @all
To extract a PIT file from a device like the Note 2 N7100 16GB we can use this on terminal emulator:
su -c 'dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=481 skip=2176'
and we have the out.pit on Sdcard.
Is good if we use the PIT Magic from @lyriquidperfection DEV. Thanks.
We can extract the pit file to see inside whit this tool.
To Note 3 N9005 32GB:
That command is not compatible. It make also a out.pit but the PIT Magic give us an error and not extract it.
The parameters bs, count and skip must be different to a Device from 32 GB. (The partition is same).
Someone know something about?
The Leaked Rom XXUBMH1 have one Pit file 32 GB, see HERE. The PIT Magic extracted it well, attached #1.
To compare, the Pit extracted from the N7100 16 GB on attached #2.
You can see here more info about this to S4 Mini:
http://forum.xda-developers.com/showpost.php?p=47280556&postcount=10
Thank You

Hi @all
I wait a response about this.
Thank You

I have it now whit this THREAD.

Related

N8000 PIT File - How to save your PIT file

Looking for the old bootloader of N8000 (sboot.bin) I also found what appears to be a rarity for our N8000: the Pit file (Partition Information Table)
1) N8000 - N8013 - PIT file
I examined it with a exheditor and I also found in what block of memory is in the N8000, and that is a small portion in /dev/block/mmcblk0 and exactly after 34 sectors of 512 bytes each, with a length of 2396 bytes,
Don't seems instead, like other cell or samsung devices, there is a dev \ block dedicated.
So now not only we have Pit file but you can also save the file pit of your N8000 and also of 8013
I was able to verify that the pit file I found is exactly the same pit file of my N8000!
I made (based on other examples) a batch file (I tested, but try it for yourself) that save your PIT file in the sdcard automatically by ADB commands; need to have super user rights .
Here the bat file for N8000:View attachment N8000_SaveMyPitFile.zip
Here batch file for N8013 View attachment N8013_SaveMyPitFile.zip
This is the adb commands used:
shell
su
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8000.pit bs=1 skip=17408 count=2396
Here instead the file pit found in a Russian site: View attachment Note10_PIT.zip
I hope this will be usefull for those have bricked the N8000, even with the help of the bootloader file sboot.bin.
Here pit file of 8013 View attachment My-N8013.zip
2) N8020 - PIT file
For N8020 start address is the same of pit file of N8000, but has more lenght
This is the command dd for N8020
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8020.pit bs=1 skip=17408 count=2924
This the pit file of N8020 View attachment My-N8020.zip
This the bat file for extract Pit file View attachment N8020_SaveMyPitFile.zip
Edit:
Here can found firmware with every file for Odin (incluse old bootloader ) for bricked note (russian language) http://narod.ru/disk/63365822001.6b115b2c7e18ce43c43f68567fe4d915/GT-N8000_mgt.zip.html
Another thing: If you have last blocked samsung bootloader (sboot.bin), you must make downgrade of bootloader if you want that Triangle away reset count to 0 and not to 1; i have tested it!
Thanks for this (and the warning about the new bootloader and the flash counter!)
My N8000 was working normally on the latest official not rooted rom (N8000XXCMD1_N8000RBTCMD1_DBT) and all of a sudden on a normal restart it hang on the samsung screen & when i tried to put it in the downloading mode it gave me the following lines
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
i connected it to my laptop & the ODIN discovered it but when i tried to flash a rom it gave me an error related to the partition. Any idea how this can be solved please.
how can i use this 5 files rom to fix this problem...should i just flash all the files at once through ODIN (and should i include the bootloader)...i really need help here please
dool2002 said:
My N8000 was working normally on the latest official not rooted rom (N8000XXCMD1_N8000RBTCMD1_DBT) and all of a sudden on a normal restart it hang on the samsung screen & when i tried to put it in the downloading mode it gave me the following lines
ODIN MODE
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
i connected it to my laptop & the ODIN discovered it but when i tried to flash a rom it gave me an error related to the partition. Any idea how this can be solved please.
how can i use this 5 files rom to fix this problem...should i just flash all the files at once through ODIN (and should i include the bootloader)...i really need help here please
Click to expand...
Click to collapse
Can you post the report of Odin?
Added in the first post PIT file of N8020
ghibli3 said:
Can you post the report of Odin?
Click to expand...
Click to collapse
here it is
<ID:0/021> Added!!
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Can't open the serial(COM) port.
<ID:0/021> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
Can you put pit file to n8010
dool2002 said:
here it is
<ID:0/021> Added!!
<ID:0/021> Odin v.3 engine (ID:21)..
<ID:0/021> File analysis..
<ID:0/021> SetupConnection..
<ID:0/021> Can't open the serial(COM) port.
<ID:0/021> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/021> Removed!!
Click to expand...
Click to collapse
I would try this:
downloaded the file that the link at the end of my first post
You have all in that file: the file pit, modem, bootloader and csc ECCC ... you need to enter in odin each file in the right place; the language is Russian; check repartition so you save the file pit on your N8000
See if you can flash so...
If you have a locked bootloader,It may be that you are unable to flash it; in which case you will need to downgrade the booloader via adb
Ok?
bilal.23 said:
Can you put pit file to n8010
Click to expand...
Click to collapse
You can do by yourself.
Use Framaroot for simple and quick root: with framaroot: you can root and unroot in one click; no new recovery need, your status is always official!
If you have recent firmware framaroot works with the last two options
With your N8010 rooted you can use the bat file in the first post of N8000 and send me
I can look it with an exheditor and tell you if is good and completed, so i can add in the first post your pit file of 8010!
ghibli3 said:
I would try this:
downloaded the file that the link at the end of my first post
You have all in that file: the file pit, modem, bootloader and csc ECCC ... you need to enter in odin each file in the right place; the language is Russian; check repartition so you save the file pit on your N8000
See if you can flash so...
If you have a locked bootloader,It may be that you are unable to flash it; in which case you will need to downgrade the booloader via adb
Ok?
Click to expand...
Click to collapse
i tried to flash them but it still fails...how can i downgrade the bootloader via adb?
dool2002 said:
i tried to flash them but it still fails...how can i downgrade the bootloader via adb?
Click to expand...
Click to collapse
You can use this batch file View attachment 1971542 that write via adb only theold bootloader sboot.bin (german bootloader)
These are the command via adb (thank to Odia xda-user) for all three file sboot.bin tz.img and param.bin
you can look in this post for S3 http://forum.xda-developers.com/showthread.php?t=2081748
> adb push sboot.bin /sdcard/sboot.bin
> adb push tz.img /sdcard/tz.img
> adb push param.bin /sdcard/param.bin
> adb shell
$ su
# dd if=/sdcard/sboot.bin of=/dev/block/mmcblk0p1
# dd if=/sdcard/tz.img of=/dev/block/mmcblk0p2
# dd if=/sdcard/param.bin of=/dev/block/mmcblk0p4
# rm /sdcard/sboot.bin
# rm /sdcard/tz.img
# rm /sdcard/param.bin
# reboot fota_bl
Can i save my .pit file on Galaxy S2 (GT-i9100G)?
Why this and are different?
N8000
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8000.pit bs=1 skip=17408 count=2396
N8020
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8020.pit bs=1 skip=17408 count=2924
Which command i should use?
Honestly, in our case I'd save the entirety of /dev/block/mmcblk0 somewhere, just-in-case. You can pick out the PIT later, but this way you're covered all ways.
8010 PIT
ghibli3 said:
You can do by yourself.
Use Framaroot for simple and quick root: with framaroot: you can root and unroot in one click; no new recovery need, your status is always official!
If you have recent firmware framaroot works with the last two options
With your N8010 rooted you can use the bat file in the first post of N8000 and send me
I can look it with an exheditor and tell you if is good and completed, so i can add in the first post your pit file of 8010!
Click to expand...
Click to collapse
Here my N8010 16GB PIT file. Can you check it and it to the first post then.
Thx
GeeKey said:
Here my N8010 16GB PIT file. Can you check it and it to the first post then.
Thx
Click to expand...
Click to collapse
Your file is too much big
Looking your pit it seems have the same size of N8000 so you must use the same command for N8000
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8000.pit bs=1 skip=17408 count=2396
Please use this command and repost your pit file to confirm it
ghibli3 said:
Your file is too much big
Looking your pit it seems have the same size of N8000 so you must use the same command for N8000
dd if=/dev/block/mmcblk0 of=/sdcard/My-N8000.pit bs=1 skip=17408 count=2396
Please use this command and repost your pit file to confirm it
Click to expand...
Click to collapse
Anyone got a PIT file for the 8013? I've looked everywhere. My tablet gets into Odin and nothing else. Won't flash any rom, keeps saying that there's no PIT partition. I even tried flashing a 8010 PIT file out of desperation, but it failed with the same message.
Help?
Dileas said:
Anyone got a PIT file for the 8013? I've looked everywhere. My tablet gets into Odin and nothing else. Won't flash any rom, keeps saying that there's no PIT partition. I even tried flashing a 8010 PIT file out of desperation, but it failed with the same message.
Help?
Click to expand...
Click to collapse
How have you tried flashing pit file? By Odin?
ghibli3 said:
How have you tried flashing pit file? By Odin?
Click to expand...
Click to collapse
Yep, with Odin. And I tried all the usual steps. Made sure the port was USB2, installed a 32 bit version of windows, tried different ports, etc. At this point I think either I need the 8013 pit file, or the MMC might be completely screwed.
in serious need of the n8013 pit if anyone has it
Have Your Pit file on Terminal Emulator. Type this:
su -c 'dd if=/dev/block/mmcblk0 of=/sdcard/N80xx-out.pit bs=8 count=481 skip=2176'
This only to devices from 8 and 16GB. Not to 32 GB.
Attached the Pit analyzes from PIT Magic:

I9505X live demo unit how to recover, install rom

I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Hi!
is everything works fine after you did this?
I have live demo unit, I'm afraid bricking it.
there is the possibility of making a video demo?
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me [/QUOTE]
Pics pleas??
Verstuurd van mijn GT-I9505
Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br
s4 demo unit
Deduxma said:
there is the possibility of making a video demo?
QUOTE=Sirus2012;43240081]I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
[/QUOTE]
please dose it mean my live s4 live demo unit will now behave like a normal phone and make or receive calls? after intalling this rom?
Help!
Just picked up a i9505x live demo unit.....does this process still work??
Demos don't have imeis do they I know our 3 s4s don't so calls can't be made
Sent from my GT-I9505 using xda app-developers app
s4sajii said:
Every thing is working fine for me only one prob.
when i reboot it . it stuck into the first logo. i have waited for more than 10 min.
than if i got recvoery and format the data. it boot than normally once.
Again if i had to reboot it. i have to goto recovery and format the data to boot the phone.
how to get rid of this?
br
Click to expand...
Click to collapse
Flash edited stock rom
Yes
Already did that. As described in the first post.
Br
Works but...
Everything works as it should but no WiFi.When flash Adam Kernel just get a black screen and that's it
I follow all the steps from the first post but at the end of odin flash i get FAIL . Any ideas?
Sirus2012 said:
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
Click to expand...
Click to collapse
i did it but i got this
Dj [email protected]ib ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???
mastro:° said:
i did it but i got this
Dj [email protected] ~
$ tar --delete --file=samrom.tar NON-HLOS.bin
tar: NON-HLOS.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
$ tar --delete --file=samrom.tar modem.bin
tar: modem.bin: Not found in archive
tar: Exiting with failure status due to previous errors
Dj [email protected] ~
so sir what to do ???
Click to expand...
Click to collapse
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!
stergios89 said:
same problem here.....seems like the command is not written in the right way
EDIT: I noticedd that when you start the program, it creates a folder inside 'cygwin-home' which is your user name and you have to place the samrom.tar in there in order to delete the two files!
btw the command lines are correct! cheers!!
Click to expand...
Click to collapse
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.
mloc33 said:
So what`s the status of your phone, I was given an S4 LDU and I`d love to get rid of the demo all together, I`m not to bothered that I won`t be able to use it as a phone.
Click to expand...
Click to collapse
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!
stergios89 said:
Well, based on the stock ROM I downloaded it (I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5),I deleted the the files sirus2012 was referring to and I am stuck at a point were the Odin says fail while flashing the ROM....
Trying to figure out if I need to delete another more file from the .TAR
After the FAIL status in Odin, I disconnected the phone, removed battery and placed it again and I had an error saying 'Firmware needs to be recovered via Kies'
I, once then, flashed again the stock ROM(without the deleted files) and noticed there was no WiFi....
So I either have a phone with no WIFI, or an error and phone can't boot
Hope I can find a way out of this!
Click to expand...
Click to collapse
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.
stergios89 said:
Don't give up on that.....I think there will be a solution sooner or later....(I'll try to find it asap) because this 'phone' is really good
Or it could be something really small that we can't see and do it wrong.
Click to expand...
Click to collapse
True man, fingers crossed I suppose
mloc33 said:
Seems that there`s no real method or solution, pity, it`s a waste of a phone the way it is..
Click to expand...
Click to collapse
Sirus2012 said:
I decided to make this post to help people bring life back to the I9505X live demo unit. I know how conflicting some some sites are so I just wanted to write something all can follow step for step. Hope it helps like it helped me
1 Download rom from www.sammobile.com
2 Once file is downloaded you will have something looking like this I9505XXUAMDM_I9505OXXAMDB_BTU.zip (this is one i used) http://www.sammobile.com/firmwares/?page=1&model=GT-I9505&pcode=0#firmware
3 Extract the zip file
4 You will now have somthing like this I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5
5 Rename file to samrom.tar
6 Place this file on your desktop (this will be the tar file we want to edit)
7 Download cygwin from here http://cygwin.com/setup.exe and install
8 Move the tar file to C:\cygwin\home
10 Open cygwin
11 We need to delete some files from the tar file. to do so i will list the commands below and files that need deleting. after typing each line command please wait while the action completes as it will look like its doing nothing. commands as follows
$ tar --delete --file=samrom.tar NON-HLOS.bin
$ tar --delete --file=samrom.tar modem.bin
12 Once the last command is done just close cygwin (depending on the rom you download there maybe other files that need deleting)
the files remaining should be
boot.img
cache.img.ext4
hidden.img.ext4
recovery.img
system.img.ext4
(you can check this by opening the samrom.tar file with winrar)
13 Download odin and install from http://www.android.gs/download-odin-3-07/
14 Make sure samsung drivers are installed if they are not download em from http://www.mediafire.com/download/d2h54mx7kt4uupt/SAMSUNG_USB_Driver_for_Mobile_Phones(3).exe
15 Open odin and connect your S4
16 Click on PDA and place the samrom.tar file in there and click start (it will flash)
17 after it has flashed install TWRP and install adams kernel explained here http://forum.xda-developers.com/showthread.php?t=2256252&page=14
i hope this helps people who are having trouble installing roms on there S4 live demo unit. if you would like to know anything or having trouble message me im happy to try help.
Thanks to marian_86 for helping me sort out this problem for me
If this helped you please hit thank me
Click to expand...
Click to collapse
Well I think I figured it out with my S4 demo unit to make WiFi work.
All the steps were followed BUT...
I DIDN'T delete the two files(modem and NON-hlos) and continued with the procedure
The most important step was .17 which redirects you to another thread about TWRP and Adams Kernel...
Following the steps there where enough to solve my issue.
And now my WiFi works pretty good(so far so good at least for the last 2-3 hours )
Let me know if it worked for you too!
Cheers!

[Q] I9500 Repacked CSC can not be flashed via Odin

Hello All
I just start to work with Android files unpack and repack jobs, So I needed to extract the CSC file for I9500 model.
- I download the CSC tar file and then extract it using 7zip tool, Inside it i got two files cache.img and hidden.img
- I run this command :
/home/tools/simg2img /home/CSC/hidden.img system_.img
- After that i did this command to mount the img:
mount -o loop system_.img /mnt/system
- After that all is ok and i can check what is inside the img and add apk files or remove them.
- After I did what i needed I wanted to repack it to make it hidden.img again, So i run this command:
mkdir temp
/home/tools/mkuserimg.sh -s /mnt/system hidden.img temp 542xxxx (I puthere the original size of the system_.img using ll command)
- I got the hidden.img
- After that i repack it with the cache.img and get the CSC.tar file.
THE Problem is:
When I try to flash the repacked CSC.tar file it flashed the cache.img, but stop and failed at hidden.img
I looked here on the forum and found many post about i9500 repack steps, but all were talking about system.img or so, I only need to know the Right steps or order to repack the hidden.img of i9500 to be able to flash it via Odin flasher.
Notice: I use the same steps to unpack and repack hidden.img of S7582, S7562, and other models too, All were flashed ok with np.
I hope that someone can help me here.

can i have a N910G pit file?

can i have a N910G pit file?
n910g for australia optus, if you have one,please send me link, thanks
kyle1031 said:
can i have a N910G pit file?
n910g for australia optus, if you have one,please send me link, thanks
Click to expand...
Click to collapse
Unfortunately I couldn't find the pit file, but still there's a way. If someone has a same device as of urs and also rooted, then u can tell him to install android terminal and busybox. Then tell him to type this in terminal:
su
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
This will extract the pit file from the ROM and will be placed in the internal.
U can post this thing in ur device forum, so someone could help u to give the pit file.???
tra_dax

N9005 changing boot name img param.bin

Hi all I've read some guide to extract param.bin with terminal emulator but nothing work. Anyone give me the correct procedure to extract param.bin modify boot image and save it?
Thanks.
freejtd said:
Hi all I've read some guide to extract param.bin with terminal emulator but nothing work. Anyone give me the correct procedure to extract param.bin modify boot image and save it?
Thanks.
Click to expand...
Click to collapse
Maybe you are querying the wrong block. Try this :
Code:
su
dd if=/dev/block/mmcblk0p10 of=/mnt/sdcard/param.bin
zlazaar said:
Maybe you are querying the wrong block. Try this :
Code:
su
dd if=/dev/block/mmcblk0p10 of=/mnt/sdcard/param.bin
Click to expand...
Click to collapse
I've tried that block but it's 10mb
The dimension of param.bin it's about 1mb right?
P8 block is 530 kb
Really I don't know what is right block to export.
freejtd said:
Maybe you are querying the wrong block. Try this :
I've tried that block but it's 10mb
The dimension of param.bin it's about 1mb right?
P8 block is 530 kb
Really I don't know what is right block to export.
Click to expand...
Click to collapse
Size is different on each device.
On the S4 for exemple, it's about 4mb.
According to the stock partition table of N9005, param is located on 10th block.
Edit: you can also use ibs, obs or bs options of dd command to limit the size dumped from that partition.
The content never occupy the exact full size of a partition.
zlazaar said:
Size is different on each device.
On the S4 for exemple, it's about 4mb.
According to the stock partition table of N9005, param is located on 10th block.
Click to expand...
Click to collapse
Ok well I will try add new boot img in block p10. I've read a guide for note 4 but when launch tar command it give me error. I'm not expert, simply follow guide at letter.
Do you have another type of command to add new img on param.bin?
Thank you for reply at this thread it's most appreciated.
freejtd said:
Ok well I will try add new boot img in block p10. I've read a guide for note 4 but when launch tar command it give me error. I'm not expert, simply follow guide at letter.
Do you have another type of command to add new img on param.bin?
Thank you for reply at this thread it's most appreciated.
Click to expand...
Click to collapse
Can you please explain what do you want to do exactly.
The only boot.img i know is the kernel it self.
zlazaar said:
Can you please explain what do you want to do exactly.
The only boot.img i know is the kernel it self.
Click to expand...
Click to collapse
Just changing img note 3 with img note 7. When you boot device you see the name..
Look at this http://forum.xda-developers.com/note-4/themes-apps/tutorial-edit-note-4s-boot-splash-screen-t3223157
freejtd said:
Just changing img note 3 with img note 7. When you boot device you see the name..
Click to expand...
Click to collapse
The guide is very clear, use the provided script if needed.
Make sure you replace 08 by 10 in block name.
Your modified image must be =< 200kb and exactly 1920x1080px.
Sorry can't help more.
Thanks for your help.
I tried block p8 tar xf give me error.
freejtd said:
Thanks for your help.
I tried block p8 tar xf give me error.
Click to expand...
Click to collapse
Take a look here : http://forum.xda-developers.com/showpost.php?p=47675405&postcount=35
zlazaar said:
Take a look here : http://forum.xda-developers.com/showpost.php?p=47675405&postcount=35
Click to expand...
Click to collapse
Thank you I can't untar param.bin it give me error I think isn't my job :crying:
freejtd said:
Thank you I can't untar param.bin it give me error I think isn't my job :crying:
Click to expand...
Click to collapse
Install Busybox (if not already done) then use "busybox tar" instead of "tar"
zlazaar said:
Install Busybox (if not already done) then use "busybox tar" instead of "tar"
Click to expand...
Click to collapse
Installed busybox untar not working
Invalid tar format.
Ahhh my patience it's ended grrrr
ls -l /dev/block/platform/msm_sdcc.1/by-name
will show you the right block.
block 10 is right.
---------- Post added at 04:29 PM ---------- Previous post was at 04:25 PM ----------
i pulled it and opened it in a hex editor. it's empty.
any more ideas?
I have no ideas. Just follow guide but nothing to do.
freejtd said:
I have no ideas. Just follow guide but nothing to do.
Click to expand...
Click to collapse
The last time I read in note 4 forum it's only for exynos.
Sent from my SM-G925F
Rosli59564 said:
The last time I read in note 4 forum it's only for exynos.
Sent from my SM-G925F
Click to expand...
Click to collapse
:crying:
@freejtd If I remember correctly, you once posted on Phronesis rom thread that you have the note 7 param.bin file. I would like to have that, I'm gonna try to edit Note 3 param.bin with Note 7. I'm also stuck a param.bin untar. I have no errors everything goes perfect but I get no images in param folder (strange). But I'm still trying and need note 7 param.bin
immi said:
@freejtd If I remember correctly, you once posted on Phronesis rom thread that you have the note 7 param.bin file. I would like to have that, I'm gonna try to edit Note 3 param.bin with Note 7. I'm also stuck a param.bin untar. I have no errors everything goes perfect but I get no images in param folder (strange). But I'm still trying and need note 7 param.bin
Click to expand...
Click to collapse
open param.bin with a hex editor. it's empty. this is why you don't get anything after untaring. logo must be located elsewhere i guess. but maybe param.bin from another model would be helpfull for finding the data we are looking for.

Categories

Resources