odin firm update.. problem with csc - Galaxy S 4 Q&A, Help & Troubleshooting

after flash the new firmware 4.3 EUR greece. coming from 4.3 BTU german.the csc its changed to (ALB)
why? should not be changed to csc EUR;;;;;sosssssssssssssss

Related

[Q] I9500 firmware XSG, but after flash shows KSA

Hello mates
I downloaded the latest 4.3 XSG firmware from sammobile, but after installation the CSC moved to KSA!
Is this normal?
Also when I downloaded the 4.2.2 for XSG, the same happened. Means UAE firmware shows KSA on my phone.
Someone could help me to understand why?
Cheers

Help ALB CSC

I have galaxy s4 i9505 and after region changing my csc is ALB, i can't get updates. What can i do? It is multi-csc... Region SEB, but CSC ALB.
So I will not get updates?
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Meyhemg said:
Hi
I had the same problem, I don't know why it happens.
I also have GT-I9505 and at first I had mismatch of PDA and CSC, my PDA was ME2 and CSC was BTU so Kies told me it doesn't support my firmware and thus I couldn't get updates. That was on android 4.2.2.
Then I installed the DBT (android 4.3) stock rom of Germany but when I entered Kies the CSC was still BTU and didn't change even after a factory reset so again I couldn't get updates, not via Kies nor OTA. Afterwards, I installed at last the BTU stock rom and everything was OK.
The Kies no longer told me that my firmware is unsupported and I received the MK8 update a week ago and gonna receive the new update which was released yesterday in a few days. Moreover, I forgot to mention that the Knox flag wasn't tripped after installing the BTU rom.
My suggestion is you install the rom which matches the CSC of your device because the CSC doesn't change after installing a stock rom so you have to adapt yourself to the CSC.
Click to expand...
Click to collapse
My CSC now is ALB, and i can't find this rom on samsung-updates.com
Before that the CSC was different?
Meyhemg said:
Before that the CSC was different?
Click to expand...
Click to collapse
Before was DTM
Vartotojas258 said:
Before was DTM
Click to expand...
Click to collapse
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Meyhemg said:
DTM is of Germany T-Mobile. Where are you from?
You had the German T-Mobile before and moved to SEB (Serbia) rom?
Click to expand...
Click to collapse
I'm from lithuania, but when buy the phone csc was dtm.
Vartotojas258 said:
I'm from lithuania, but when buy the phone csc was dtm.
Click to expand...
Click to collapse
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Meyhemg said:
You can try flashing (via Odin) the new update which was released two days ago (MKE).
It was released for Germany and France for now but soon will be rolling to everyone.
I'm almost sure it won't trip the Knox flag if you do everything right.
Download here: http://www.sammobile.com/firmwares/3/?download=22443
Click to expand...
Click to collapse
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Vartotojas258 said:
If i wait for SEB region update and when i flash it csc will change? I think to wait for kitkat and then flash it.
Click to expand...
Click to collapse
Yeah that's an option also.
Also, did you try factory reset after the installation? If not, do it. It sometimes helps, in my case it didn't help to change the CSC to DBT when I installed the German rom.
I hope Kitkat will arrive soon to our devices. I can't wait to see the improvements and how did they change the TW.

[Q] CSC for G900F Problem

Hi,
I am using International version of Samsung Galaxy S5 G900F, I bought it with the firmware belonging to KST(Saudia Arabia). As I was in need of 4G I flashed it with official firmware from Poland (XEO) at that time only country having Lollipop update. After some time I rooted my mobile. and flashed Xtrestolite rom. Now I reverted back to stock official firmware from England(BTU). My CSC when seen in Kies is from XEO(Poland). While I installed Firmware from England. Now again I rooted my mobile again and installed Xtrestolite rom to change CSC manually through Phoneinfo Samsung. But it gives error. It shows in CSC section
Original CSC XEO
Firmware CSC BTU
Active CSC XEO/BTU
CSC Country UK & IRE
Prouct name G900FZDAXEO
How can I change original CSC according to the official firmware installed i.e. BTU(UK) to get official updated from Kies?
Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html
*Detection* said:
Try this
http://forums.androidcentral.com/sa...5-guide-how-change-csc-samsung-galaxy-s5.html
Click to expand...
Click to collapse
No Luck. Same
After flashing firmware going to recovery android icon comes and some installation starts (A blue bar below it) it goes almost half in the way and phone restarts again. If I go to recovery there comes.
Manual mode
Appling multi-csc
Applied the CSC-code: XEO
Successfully applied multi-CSC

Oreo in France (mixed XEF and BTU)

Hello
I was on the PHN stock firmware (from the "official" topic) .
I made a clean install to change to XEF with the last XEF 7.0 firmware
AP_G935FXXS2DRAA_CL12365438_QB16535167_REV00_user_low_ship_meta.tar
BL_G935FXXS2DRAA_CL12365438_QB16535167_REV00_user_low_ship.tar
CP_G935FXXU2DRA9_CL648265_QB8671796_SIGNED.tar
CSC_OXA_G935FOXA1DQJ3_CL12365438_QB15342654_REV00_user_low_ship.tar
After the install, I get the OREO OTA Update.
AP : G935FXXU2ERD5
CP : G935FXXU2ERD5
CSC : G935FOXA2ERD5
But It seems that I got the UK firmware instead of the XEF one... (for example I have Samsung Pay UK, but It works)
Is It normal ?
Hello, because you flashed CSC that wipe all ... next time, flash HOME_CSC and you will keep your settings
Now you can go and flash your CSC from nougat here (I don't think XEF is already done for Oreo at moment) : http://www.phonandroid.com/forum/av...operateur-sur-le-s7edge-sm-g935f-t177633.html
ric69 said:
Hello, because you flashed CSC that wipe all ... next time, flash HOME_CSC and you will keep your settings
Now you can go and flash your CSC from nougat here (I don't think XEF is already done for Oreo at moment) : http://www.phonandroid.com/forum/av...operateur-sur-le-s7edge-sm-g935f-t177633.html
Click to expand...
Click to collapse
Yes I know, I flashed the CSC, because I wanted to change from PHN to XEF. (To activate Samsung Pay in my country)
But the OTA Update change from XEF to BTU by himself....
yan74s said:
Yes I know, I flashed the CSC, because I wanted to change from PHN to XEF. (To activate Samsung Pay in my country)
But the OTA Update change from XEF to BTU by himself....
Click to expand...
Click to collapse
OTA won't change CSC, it means your CSC was already set to BTU, thats why you received BTU oreo OTA.
Sent from my S7 Edge using XDA Labs

How to change csc from XEU back to BTU

I'm on xeu but flashed a btu firmware via Odin and still on xeu, I take it iv to do something before flashing the btu firmware to make it stick?
Probably already a thread for this but can't find it that's why I made this.....

Categories

Resources