Related
Hello everyone,
I installed last week the German stock rom for Galaxy S4 GT-I9505.
Here are the details:
AP: I9505XXUEMJ5
CP: I9505XXUEMJ5
CSC: I9505OXAEMJ5
When I try to connect it via Kies and check for newer firmware I get the message that my firmware is not supported to update via Kies.
The status of the device is Official and the Knox is 0x0.
In the Kies the lines are:
PDA: MJ5
PHONE: MJ5
CSC: MJ5(BTU)
So what's the problem? Is it a problem with Kies software and I'll get OTA updates from Germany when they will be out? Or is something wrong with the sofware of the device?
Thanks in advance
Anyone???
Meyhemg said:
Hello everyone,
I installed last week the German stock rom for Galaxy S4 GT-I9505.
Here are the details:
AP: I9505XXUEMJ5
CP: I9505XXUEMJ5
CSC: I9505OXAEMJ5
When I try to connect it via Kies and check for newer firmware I get the message that my firmware is not supported to update via Kies.
The status of the device is Official and the Knox is 0x0.
In the Kies the lines are:
PDA: MJ5
PHONE: MJ5
CSC: MJ5(BTU)
So what's the problem? Is it a problem with Kies software and I'll get OTA updates from Germany when they will be out? Or is something wrong with the sofware of the device?
Thanks in advance
Click to expand...
Click to collapse
Maybe your Region is already at the current firmware, i'm from Holland and my final firmware i got is MJ5 too. Why do you want to upgrade it anyway?
BillvanHalen said:
Maybe your Region is already at the current firmware, i'm from Holland and my final firmware i got is MJ5 too. Why do you want to upgrade it anyway?
Click to expand...
Click to collapse
I just wanted to check if Kies supports upgrading my firmware because the previous firmware I had wasn't supported by Kies.
And it had been supported it would have written that there's no newer version but wouldn't have written that it doesn't support so it's not the issue.
Anyone??
Meyhemg said:
Anyone??
Click to expand...
Click to collapse
What if you try to update your phone with: "Software Update" ON your phone.
BillvanHalen said:
What if you try to update your phone with: "Software Update" ON your phone.
Click to expand...
Click to collapse
This is the MAIN thing I'm not sure about and I want to ask you about it:
If Kies does not allow me to update my firmware through it will it affect the OTA feature? I mean if Kies doesn't allow to update so OTA won't work also?
Meyhemg said:
This is the MAIN thing I'm not sure about and I want to ask you about it:
If Kies does not allow me to update my firmware through it will it affect the OTA feature? I mean if Kies doesn't allow to update so OTA won't work also?
Click to expand...
Click to collapse
Not sure about that, i don't know if OTA and Kies are Synced with eachother, have you tried to "Scan" for new updates with OTA on your phone?
BillvanHalen said:
Not sure about that, i don't know if OTA and Kies are Synced with eachother, have you tried to "Scan" for new updates with OTA on your phone?
Click to expand...
Click to collapse
I did try to scan with OTA so it does its scanning for few seconds and then says my device is up to date (I also don't expect any updates now because the latest one was released last month - android 4.3).
Will you recommend me flashing the XXUEMJ7 of BTU (as of Kies details, my device is originally from United Kingdom)?
Will it trigger the Knox flag?
Meyhemg said:
I did try to scan with OTA so it does its scanning for few seconds and then says my device is up to date (I also don't expect any updates now because the latest one was released last month - android 4.3).
Will you recommend me flashing the XXUEMJ7 of BTU (as of Kies details, my device is originally from United Kingdom)?
Will it trigger the Knox flag?
Click to expand...
Click to collapse
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
---------- Post added at 01:09 PM ---------- Previous post was at 01:06 PM ----------
BillvanHalen said:
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
Click to expand...
Click to collapse
Kies should regonize the phone because it's booted in Download Mode, it will load the regular MTP Android Drivers.
BillvanHalen said:
What if you try a Samsung Kies Firmware Upgrade and Initialization? It will bring your device to fully Stock TouchWiz Android 4.3.
Enter your Modelnumber (GT-I9505), pull out your battery you will see a S/N code, fill that in, reboot in Download mode and follow the Kies instructions.
WARNING: YOU WILL LOSE EVERYTHING SAVED ON YOUR PHONE STORAGE, INCLUDING MEDIA AND CONFIGURATIONS, SO BACKUP THEM.
You could give it a try.
---------- Post added at 01:09 PM ---------- Previous post was at 01:06 PM ----------
Kies should regonize the phone because it's booted in Download Mode, it will load the regular MTP Android Drivers.
Click to expand...
Click to collapse
I didn't get what you mean.
Where is this Samsung Kies Firmware Upgrade and Initialization?
And in case you didn't understand me, I have already full stock TouchWiz Android 4.3. The only problem is that I flashed via Odin the German stock rom and the CSC in Kies shows in brackets the product code of United Kingdom (BTU) instead of Germany (DBT).
Why did it happen? I flashed all by the rules and Kies didn't report any problems at the end of the process.
Hi Guys i have developed a Swollen battery for my i9505 and have arranged a replacement via warranty and and Samsung. They need to see the phone along with battery however, My phone is currently rooted with cwm recovery installed. I need to bring it back to official firmware and i am looking for the same firmware the phone came with.
I am not to sure what region the original firmware was based on. I am from the UK and the phone was on o2 network. These are my about details prior to modification:
Android 4.2.2
Baseband Version: I9505XXUBMF8
Kernal Version: 3.4.0-917495 [email protected] #1 Wed June 19 20:07:29 KST 2013
Build: JDQ39.I9505XXUBMF8
SELinux: Permissive
Secure Boot Status: Type: Samsung
I believe i have the old boot-loader and my device is Knox free. I am looking for this firmware but cannot find it. I did some research and came across it on DjeMBeY's thread however the stock firmware he has link to was on Hotfile which is no longer running.
Can someone please help me find alternative link to my required firmware please? Also if my firmware was "MF8" does this mean all MF8's are the for the same region? or will there be separate MF8's for separate regions?
Any help would be appreciated. Thanks
AndroidFirmwares.net or Samsung-Updates.com, if they don't have what you need you're probably SOOL, at least until Samfirmware have all their stuff back up (when they put stuff up on Terra, they seem to have started with the most recent stuff working back, but it seems a bit 'patchy' I.E some recent stuff is up, some isn't).
MistahBungle said:
AndroidFirmwares.net or Samsung-Updates.com, if they don't have what you need you're probably SOOL, at least until Samfirmware have all their stuff back up (when they put stuff up on Terra, they seem to have started with the most recent stuff working back, but it seems a bit 'patchy' I.E some recent stuff is up, some isn't).
Click to expand...
Click to collapse
Okay thanks i have had a look for my firmware on Samsung-Updates.com, and come across 2 firmwares which are MF8
GT-I9505 YOG I9505XXUBMF8 Android 4.2.2 19.06.2013 917495
GT-I9505 PRT I9505XXUBMF8 Android 4.2.2 19.06.2013 917495
I believe one is for Spain and one for Poland, now my question is how do i know which one was originally on my phone? My phone is a UK model running on o2 network, and these 2 firmwares are for different countries, I am confused, should there be a MF8 for UK also? Please advice? thanks
kuljit55 said:
Okay thanks i have had a look for my firmware on Samsung-Updates.com, and come across 2 firmwares which are MF8
GT-I9505 YOG I9505XXUBMF8 Android 4.2.2 19.06.2013 917495
GT-I9505 PRT I9505XXUBMF8 Android 4.2.2 19.06.2013 917495
I believe one is for Spain and one for Poland, now my question is how do i know which one was originally on my phone? My phone is a UK model running on o2 network, and these 2 firmwares are for different countries, I am confused, should there be a MF8 for UK also? Please advice? thanks
Click to expand...
Click to collapse
The one u are looking for UK O2 brand android 4.2.2 is: HERE
* EDIT: Conect it to KIES for know ur region like in photo i added u :highfive:
Joku1981 said:
The one u are looking for UK O2 brand android 4.2.2 is: HERE
* EDIT: Conect it to KIES for know ur region like in photo i added u :highfive:
Click to expand...
Click to collapse
Had a quick look and this is what Kies is telling me, attached photo. Please advice, thanks
Which is exactly what he linked you to
Okay guys, thanks a lot, i think by time i was trying to upload kies info, someone posted already lol. Thanks
kuljit55 said:
Okay guys, thanks a lot, i think by time i was trying to upload kies info, someone posted already lol. Thanks
Click to expand...
Click to collapse
If u upgrade btw KIES ur phone will be updated to android 4.3 and u can't root it without void ur warranty. Flash the one I posted u before in the post #4 :highfive:
Hi All,
I've just updated my Note 3 (9005) to KitKat 4.4.2.
Since updating everything is working except the sound.
In fact whenever a sound might play the phone hangs for a second.
Im certain ive flashed everything correctly, tried multiple ROM's but nothing fixes it.
Anyone have any ideas?
EDIT: After double checking, the modem/baseband file doesnt appear to have worked? currently showing MI6, what can i do to update it?
EDIT 2: After looking into it, this may be causing my issues....if anyone has the most up to date baseband for O2 UK then could they please send it?
Sammobile has the latest O2 firmware you can grab it from there.. Have you been able to flash back to 4.3 then?
OK, ive downloaded the latest O2 update.
This is in 1 single file, not the 4 that the KitKat update came in.
Can anyone tell me how to flash just the CP/Modem/Baseband from this one file??
EDIT: Flashed Modem.bin file through ODIN, flash completed successfully, but baseband still stuck at XXUBMI6, please can anyone tell me why this wont update?
JimmyVD said:
OK, ive downloaded the latest O2 update.
This is in 1 single file, not the 4 that the KitKat update came in.
Can anyone tell me how to flash just the CP/Modem/Baseband from this one file??
EDIT: Flashed Modem.bin file through ODIN, flash completed successfully, but baseband still stuck at XXUBMI6, please can anyone tell me why this wont update?
Click to expand...
Click to collapse
It could be that O2 have locked your handset? Only thing I can think of, off the top of my head... you can try the leaked firmware (link in my signature, if needed again) - it has the 4 files. Flash only the Bootloader, then the ROM itself and see. Note of warning, playing with bootloaders is a risky game, and you can brick very easy if it goes wrong.
EDIT: Yes the official XEO is 1 file not 4 files like the leak
Thanks for the speedy reply.
I've tried updating to 4.4 and that's how the sound stopped working?
So my bootloader has already been updated. Don't know how to check though?
Do baseband/modem/cp need to be updated sequentially? e.g. MI6-->MI7 etc.
Thank again for all the help!
JimmyVD said:
Thanks for the speedy reply.
I've tried updating to 4.4 and that's how the sound stopped working?
So my bootloader has already been updated. Don't know how to check though?
Do baseband/modem/cp need to be updated sequentially? e.g. MI6-->MI7 etc.
Thank again for all the help!
Click to expand...
Click to collapse
The baseband doesn't need updated sequentially no, you can go from MI to MK if you choose. It's probably O2's basband.
Can you dial *#1234# into your keypad and post the results ?
radicalisto said:
The baseband doesn't need updated sequentially no, you can go from MI to MK if you choose. It's probably O2's basband.
Can you dial *#1234# into your keypad and post the results ?
Click to expand...
Click to collapse
OK great, thats what i thought, maybe it is O2's baseband then....
Heres the results of *#1234#:
AP: N9005XXUENA6
CP: N9005XXUBMI6
CSC: N9005OXXENA5
Again, thanks very much for the help!!
JimmyVD said:
OK great, thats what i thought, maybe it is O2's baseband then....
Heres the results of *#1234#:
AP: N9005XXUENA6
CP: N9005XXUBMI6
CSC: N9005OXXENA5
Again, thanks very much for the help!!
Click to expand...
Click to collapse
Yup it's O2's baseband, - remind me again, you have root?
From what I can see, O2 are up to MJ in terms of baseband - Sooo we need to find you an up to date baseband to flash (modem basically) - Now modems can be tricky if you get it wrong or get the wrong one. Have a look around and see if we can find you a more up to date one.
You could (not saying you should) unlock your phone and then use the NA2 baseband which I currently use (I am also on O2 but with an unlocked handset) - Not 100% on Sim unlocking so you'd have to have a nose around and see what's what.
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
Also need to Note, Sound issue may indeed be hardware based, but we will see soon enough.
radicalisto said:
Yup it's O2's baseband, - remind me again, you have root?
From what I can see, O2 are up to MJ in terms of baseband - Sooo we need to find you an up to date baseband to flash (modem basically) - Now modems can be tricky if you get it wrong or get the wrong one. Have a look around and see if we can find you a more up to date one.
You could (not saying you should) unlock your phone and then use the NA2 baseband which I currently use (I am also on O2 but with an unlocked handset) - Not 100% on Sim unlocking so you'd have to have a nose around and see what's what.
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
Also need to Note, Sound issue may indeed be hardware based, but we will see soon enough.
Click to expand...
Click to collapse
I thought as much TBH.
I am rooted, i've downloded the latest O2 update and tried to flash the firmware but it didnt take, im still stuck at MI6.
I'll see what i can do re: unlocking the phone.
If you can find a more updated Baseband from O2 i would be eternally grateful!
Thanks,
Hey All,
I got a Note 3 N9005, which supposedly was purchased in UAE.
Currently trying to use it in India, but, the device always says "No Service", with a crossed circle instead of network signal icon on notification bar.
Phone is on 4.2.2 with UGNH1. Below are some observations:
- Phone does NOT ask for any PIN / Unlock Code.
- In Settings > Status.. irrespective of any SIM, or no SIM.. Mobile Network Type = Unknown, Service State= Out of service, Mobile Network State=Disconnected.
- Orig CSC code is displayed as XTC from Phone Info App
- Tried to select a different CSC from CSC Select app.. it changed the boot logo but, network status.. still crossed circle
- IMEI is proper as printed below the battery
- Still i tried ChainFire's RegionLockAway. But, as expected, the method is only for MI7 / MJ1 / MJ3 JB versions. Sadly mine has already crossed and has A2 bootloader. So, no change was observed with CF RegionLockAway. Reverted the cahnges.
- Tried to flash MJ1 / MJ3 binaries from sammobile. As expected the latest bootloader won't allow to downgrade.
- Flashed Omega, but for no luck. Still no service and crossed circle icon.
- Flashed latest CyanogenMod. Though there was no Crossed Circle icon, there was an icon of network signal with zero network.
- Flashed official Lollipop verson to see if any changes.. no luck. Reverted back.
- Installed advanced network info app, network status, neighboring MSC, cells.. etc was shown as none.
No clue how to enable the device's network capabilities (all else like WiFi and other feature work as usual).
It will be a great help if you can guide me through! Please let me know if any other info is required.
Thanks a lot in advance. !!
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
What I would do is...
Download the firmware from Sammobile to suit your phone. One fairly common issue is that Hong Kong or Chinese phones get sold into Europe or other markets and their PIT and other partitions are different. So first thing is to go back to scratch.
If you phone IS from where you think, make sure you have the stock firmware for that location and flash the latest version using Odin and Download mode.
Start Odin - v3.09 is best.
To enter DL mode for anything to do with BL or Modem you MUST turn phone off. It is best to remove the battery and wait a while, then put it in and use the Power On+Vol-Down+Home key to get into DL mode, then [plug phone into PC and wait for Odin to notice it is there.
(if Odin doesn't notice it, get the latest Samsung USB drivers for the phone and install them with phone unplugged, then plug in phone and Windows should give a pop-up)
Click on AP in Odin and navigate to where you saved the firmware - note you DL'd a zip but you need the md5 file so use 7zip to unpack the zip.
Click on the md5 file and wait for it to load into Odin.
* [Auto Reboot] and [F.Reset Time] should be the ONLY things ticked.
Click [Start] and wait.
Let phone restart and set it up with your details. Once done see if you have network.
Journyman16 said:
Purchased in UAE doesn't necessarily it was a UAE phone. Phone Info Samsung from Play Store can tell you where it is from.
......
Let phone restart and set it up with your details. Once done see if you have network.
Click to expand...
Click to collapse
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
maesiva said:
Thanks Journyman16 for the quickreply.
I installed the "Phone Info Samsung" app as you mentioned and found the phone's CSC code is XTC! (= Philippines (Open Line))!!
Thanks for the hint. I will download the latest firmware from sammobile for n98005 for XTC and check. Will be back with updates in some time.
Click to expand...
Click to collapse
Update:
Flashed below 3 stock firmwares from sammobile, each time cleared cache and factory wipe.. still the crossed circle is hopelessly adamant and persistent.
4.4.2 N9005XXUGNH1
4.4.2 N9005XXUGNI4
4.3 N9005XXUDMJ7 (failed to flash, i guess due to current bootloader version A3)
I tried with Odin 3.09.3 & 3.10.6 & 3.07 .... same result.
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
maesiva said:
Update:
Any suggestions? please share.. I'm ok to soft brick the phone Recovered from boot loop few times
Any further suggestions? Please share.. Shall i give a try with full wipe (/system/ folder wipe) with TWRP ? Or any other thing ?!
Click to expand...
Click to collapse
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
JJEgan said:
Tried a different sim card ??
Checked APN settings .
Checked you have modem/ baseband via settings .
Click to expand...
Click to collapse
Hi JJEgan, thanks for your suggestions..
I tried with different SIM, yet no luck.
APN settings.. shows my SIM operator's default settings.
When I search networks Manually.. it searches for a ~10 seconds and returns without any list/error.
Select automatically shows "Automatic registration.." progress continuously for > 5 mins.. i closed manually.
Attached screenshot of Baseband, Modem, CSC versions.
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Baseband: UGNH1
Kernel: 3.4.0-1955971
Journyman16 said:
They are old stock ROMs - how sure are you the phone wasn't updated to the new version of BL? I'm not sure if you're on the new version and then try to downgrade it, which version you will see in Phone Info but check it. There's also a phone # code to use that returns the basics for the phone, but I can't recall if you said you get calls or not and I'm heading for bed. Think the code is something like *#12334#* - google for secret smartphone codes.
Click to expand...
Click to collapse
Yea Journyman16, they seem to be still good old of 4.4.2. Latest must be 5.0. On samobile, for XTC i could see only till 4.4.2. Maybe for this phone version, there are no updates? Not sure.
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
/system/csc/GLB/system/csc/customer.xml has a line:
<NbNetworkLock>1</NbNetworkLock>
Which ChainFire's RegionLockAway changes to
<NbNetworkLock>0</NbNetworkLock>.. but as mentioned in it's details, the method is compatible only with MI7, MJ1, MJ3 firmwares and i'm on UGNH1 and unable to downgrade
Chainfire said:
Sammy, in their never-ending quest to make sure they've pissed off every single one of their customers at least once, have decided to region lock their latest model devices.
...
Compatible devices
- Galaxy Note 3 SM-N9005 (MI7, MJ1, MJ3 firmwares)
...
Click to expand...
Click to collapse
Any method to downgrade the BL to A1 would help !?
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
maesiva said:
Attached adb logs, if of any use to analyze.
aeroplaemodeoffon.log
boot.log
networksearch.log
shutdown.log
Click to expand...
Click to collapse
I'd upgrade rather than try to get around the downgrade issues. What Region do you WANT to have? European ones seem to get early release of upgrades - e.g. many LP ROMs are based around the Polish release.
I don't know enough to interpret logs, but my thought would be to find a non-Philippines version (one of the Europe ones perhaps) and find a PIT file for that one. Then go read up on how to safely flash a new PIT. Then flash your preferred firmware and follow the root process etc.
I started with a HK version of S3 - every time I tried to flash a new ROM it failed and bricked my phone. Eventually I found that the PIT file on most Asian phones was different and I flashed PIT, then stock FW for the region I wanted then re-rooted and flashed the custom ROM.
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Journyman16 said:
Read many time, flash once, OK? I do not make bricks, nor need them, so I will not accept them delivered to my door...
Click to expand...
Click to collapse
good one
maesiva said:
good one
Click to expand...
Click to collapse
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
Now you probably want an India ROM but I haven't any links for that 0 there's a thread for India users though I think.
What I think might be happening is that different countries use different frequencies and formats for signal. It might be that India's set up simply doesn't work with the modem you've been using and the India ROM will not set up with the Asian PIT set up etc.
But read up on the process first, OK? The more you know about it the better chance you have to recover from anything going wrong.
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Journyman16 said:
There's a Euro PIT on the link at This Post - I checked and the dropbox is still valid. It's 4.4.2 so could be just what you need.
....
Also, I presume from your OP that the phone NEVER worked once you got it? Do you know for a fact it worked prior to that? Maybe you're chasing solutions for a faulty hardware issue?
Click to expand...
Click to collapse
Hi Journyman16, thanks for the suggestions.. i tried the pit file you referred, but, still no luck. And, if i'm not wrong pit file is all about allocating ROM space for /system & /dbdata and has nothing to deal with the antenna/telephony module, please correct if i'm not right.
About the phone's status yea you're right. It never worked after i received it. But, it was working usually in UAE, as per the info i got. Maybe.. as you suspected.. it might be faulty hardware too.. I don't know.. just exploring the options.. to conclude something..
maesiva said:
And, yes, sadly BL is updated to A3. Which I could see in Recovery mode's REV line. (if it was A1, I could have flashed MI7 and tried RegionLockAway.. )
*#1234# gives the below info:
AP: UGNH1
CP: UGNH1
CSC: BGNH1
Any heads up ?!
Click to expand...
Click to collapse
The only unbranded NH1's seem to be Greece or Netherlands. Netherlands has a 5.0 - maybe DL that and flash in Odin? Greece has a v5.0 but it's branded with (EUR) so I don't know if that's a company or general... I'd go the Netherlands one.
Other than that, I'm not sure - might be time to get the phone checked properly?
Finally.. could trace the root cause.. antenna / receiver chip malfunction. So, it was an hardware issue that had to be replaced at a cost at service center.
Summary: If network icon is crossed circle, its not a good sign !! Thanks
Journyman16 said:
Journyman16
Click to expand...
Click to collapse
,
JJEgan said:
JJEgan
Click to expand...
Click to collapse
!!
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Naedean said:
I need your help. I have a problem after flashing lollipop firmware on samsung galaxy note 3, sm-n900s the signal or the device has no service. Any modem use to flash?
Please, I need your help xda devs as soon as possible. Really appreciated. Thank you.
Click to expand...
Click to collapse
Please search and read before posting.Multiple identical questions posted day after day .
Usual is wrong IMEI .
Sent from my SM-N930F using XDA-Developers Legacy app
This is a list of ODIN flashable stock ROMs. Uploading them to AFH and posting them here for faster download.
If you want your device on here, please give me the model number (SM-Txxx) and CSC you need. Thread will be updated when I have time.
ODIN - Used for flashing ODIN tar.md5 files to your device.
Odin3_v3.10.7.zip
Stock ROMs - These are UNmodified tar.md5 ROMs from Samsung.
SM-T710
5.0.2_T710XXU1AOG5_T710XAR1AOG6_XAR.zip
5.1.1_T710XXU1BOH7_T710XAR1BOH7_XAR.zip
SM-T810
5.0.2_T810XXU1AOG6_T810XAR1AOG6_XAR.zip
5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
SM-T815
T815XXU1AOGB_T815VFG1AOG3_VOD.zip
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Kickoff said:
Please focus on T815 as well. Many of us would very appreciate.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
I will download what's out and start posting them :good:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Fis2 said:
When you download the file is a ZIP. I think I must decompress it in order to get the tar.md5 , right?
Which option must I select in Odin? AP with only REboot and Factory reset?
thanks!
Click to expand...
Click to collapse
Correct. Make sure you DO NOT check re-partition.
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Bigbot, here's the latest AOI5 firmware for T815 from region DBT (Germany) mirrored to my Dropbox https://www.dropbox.com/s/felibhquhf8upzw/T815XXU1AOI5_T815OXA1AOI5_DBT.zip?dl=0
Feel free to mirror it to AndroidFileHost as I had issues uploading (upload speeds were slow for me) Thanks!
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
I'll download it later today and update when it's done :good: thanks
Reflashing
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
I understand that these are stock roms, curious if non-stock roms like CM12 and similar will ever make their way over? My OR rom is awesome, I'm just one of those fools that's constantly customizing for the fun of it.
keyapira said:
Hi,
I will reflash factory Firmware, i have rottet and have custom recovery. I already have download Firmware and odin can somebody explain me please hove to do it i will be greatfull thanks everybody :good:
Click to expand...
Click to collapse
Google is your friend...
http://forums.androidcentral.com/am...w-flash-stock-rom-via-odin-new-interface.html
http://www.droidviews.com/install-stock-firmware-on-samsung-galaxy-devices-using-odin/
Flash at your own risk.
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
mrch0x said:
Hello
Rooting my device voids the warranty, but if I have any problems with my device and need support ... Can I flash the stock ROM and take it to customer support?
Without them finding out?
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
No. You can reinstall stock ROM and have the tablet working as before, but after installing anything custom the efuse will be blown. This means that it can always be detected that custom firmware/kernels/recovery/root/etc have at one point been installed. It also means security containers like Knox will refuse to operate.
I tried out the October (J) release for T815 which has been released for DBT (Germany) and a few other places. (link here). PDA version: T815XXU2AOJ4. Included CSCs: BTU (UK), DBT (Germany), ITV (Italy), XEF (France), XEO (Poland). Android 5.0.2. Previously I had the latest release for PHN (Netherlands), which is still T815XXU1AOG9.
Stagefright bug fixed according to Lookout. Not fixed according to Trustable.
New app icons
Still no multi-user
For DBT, there are four German bloatware apps included. All four can be uninstalled without root.
No Camera2 API
Dialer doesn't accept the secret codes like *#06#, *#0*#, *#1234#
Weird display behaviour (flashing, freezing) at very low battery percentages
Warning: you can not fully downgrade from this version "2" firmware to the version "1" firmwares we had until now! You can partially downgrade if you leave the bootloader and the modem as is (so downgrade only PDA and CSC).
This is great. Any chance that someone has the Stock ROM for the SM-T817V? Or does the firmware for the T815 work on this device?
The October T815XXU2AOJ4 version is now also out for T815 in the Netherlands (PHN), which is bloatfree. No other CSCs included. Link here. The dialer accepts the secret codes like "*#1234#" again. Otherwise the experience is the same. Again, you can't downgrade from this version.
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
I had and un-rooted device, which just received an update (11/03) to version LMY47X.T710XXU2BOJ1. I ended up rooting and flashing TWRP on it, but I'm having an issue writing to my external SD card. Is there something I can flash to fix this?
Thanks
edit: Google was my friend - manually updated platform.xml.
dnydny said:
Can the 5.1.1 update be flashed on any SM-T810?
I purchased one in Australia and when I tried to follow the instructions and flash with ODIN I get an error SW REV CHECK FAIL DEVICE when using 5.1.1_T810XXU1BOH7_T810XAR1BOH7_XAR.zip
Click to expand...
Click to collapse
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Is it possible to flash a T710 firmware onto a T715 device? I don't need LTE at all so I don't mind losing it (I have no SIM). I just want to get faster updates because I need multi-user support from 5.1.1.
GidiK said:
The T810XXU1BOH7 firmware is very old (H = August I think). Apparently for your device it constitutes a downgrade, which it doesn't allow. Download the most recent firmware to flash. If e.g. you currently have firmware with a "2A" (5.0.2) on your device, you can't flash this "1B" (5.1.1) firmware even though it seems like an upgrade of android, because it is a downgrade of the bootloader. Download firmware with "2B" (5.1.1) in the name and I think it may work.
I don't have the T810, but T815 which is still stuck at 5.0.2...
Click to expand...
Click to collapse
Thanks! Thats really handy to know. I'll give XAC-T810XXU2BOJ1 a shot and see how that goes.