Database Users

[DISCONTINUED][WIP] Ubuntu touch port

- - - Update - - -
After long time since I've released the last news, I've decided to discontinue this project.
I'm near final high school exams so I don't have the time to dedicate myself on the project and because, after 2+ years, my Nexus S left me with an hardbrick (I've tried applying Unbrickable Mod and replacing the motherboard but no luck).
You can find my last pieces of work on my GitHub account (https://github.com/Matsca09/Ubuntu-Touch-Nexus-S/).
I want to conclude by thanking everyone who tested and used this port and I hope someone else will continue this work to port Ubuntu on this great phone
Thanks again for all,
Matsca09
-- Original message --
Disclaimer:
Use/install it at your OWN risk!!!
I don't take any responsibility!
Hi everyone,
I want to share with you my port of Ubuntu touch for Nexus S.
What works:
Graphics acceleration
Backlight control
Calls (with audio) and SMS
Camera
Wifi
Audio
What doesn't work:
GPS (?, not tested)
3G connection (?, not tested)
Other things maybe
How to install it:
1) Download the base system and the system image from the 'Releases' section of this post.
2) Extract the 'ubuntu' folder from the Ubuntu image zip and copy it into the root of the phone storage.
3) Copy the base system zip into the root of the phone storage.
3) Flash the base system on your phone and reboot.
The TWRP recovery may report an error like "No OS installed" when you reboot/shutdown after flashing the base system: ignore that error.
Releases:
-- 13.10 (stable) --
Suspended​ -- 12.10 (preview release) --
Base system: Download​Ubuntu image: Download​
Enjoy,
Matsca09

Re: [RELEASE][WIP] Ubuntu touch port
Matsca09 said:
Disclaimer:
Use/install it at your OWN risk!!!
I don't take any responsibility!
Hi everyone,
I want to share with you my port of Ubuntu touch for Nexus S.
For now it's a uncomplete port, most things doesn't work or doesn't work properly.
What works:
Graphics acceleration
Wifi
Calls (but no audio) and SMS
What doesn't work:
Camera
Audio (no sounds at all)
Almost everything xD
The ubuntu image is more like a demo than a preview, most of the apps installed won't work, but it's cool
How to install it:
Download the zip from this post
Unpack it: you'll find 2 zips:
ubuntu.zip -> Contains the Ubuntu touch image
ubuntu-crespo-flash.zip -> Contains the base system
Unpack ubuntu.zip and move the 'ubuntu' folder into the root of sd card
Flash ubuntu-crespo-flash.zip with your recovery
At the beginning it may be a bit slow, but later it'll work smoothly
Download:
R1 -> https://dl.dropbox.com/u/9686412/ubuntu-nexus-s-matsca09-port.zip
(I can't post links for now, so you have to complete the link )
Matsca09
Click to expand...
Click to collapse
maybe this will make it clickable by quoting it
going to download and try on my ns4g just to see how it works. I don't use my ns4g as my main phone anymore
Sent from my XT897 using Tapatalk 2

You can't imagine what a big favor you do to as by porting it, i can't even get the cm10.1 to compile here :/
---------- Post added at 10:05 PM ---------- Previous post was at 09:43 PM ----------
i forgot to ask did you had to flash cm10.1 first??
---------- Post added at 11:01 PM ---------- Previous post was at 10:05 PM ----------
ok, not installing

installing...
Waiting for testing
Gratz, bro :good:
---------- Post added at 11:07 PM ---------- Previous post was at 10:46 PM ----------
the wifi ain't no work for me

Re: [RELEASE][WIP] Ubuntu touch port
Matsca09 said:
Disclaimer:
Use/install it at your OWN risk!!!
I don't take any responsibility!
Hi everyone,
I want to share with you my port of Ubuntu touch for Nexus S.
For now it's a uncomplete port, most things doesn't work or doesn't work properly.
What works:
Graphics acceleration
Wifi
Calls (but no audio) and SMS
What doesn't work:
Camera
Audio (no sounds at all)
Other things maybe
The ubuntu image is more like a demo than a preview, most of the apps installed won't work, but it's cool
How to install it:
Download the zip from this post
Unpack it: you'll find 2 zips:
ubuntu.zip -> Contains the Ubuntu touch image
ubuntu-crespo-flash.zip -> Contains the base system
Unpack ubuntu.zip and move the 'ubuntu' folder into the root of sd card
Flash ubuntu-crespo-flash.zip with your recovery
At the beginning it may be a bit slow, but later it'll work smoothly
Download:
R1 -> h***s://dl.dropbox.com/u/9686412/ubuntu-nexus-s-matsca09-port.zip
(I can't post links for now, so you have to complete the link )
Matsca09
Click to expand...
Click to collapse
Could you share your source please ?
Sent from my Nexus S using xda app-developers app

so you can all install it except me???

Gingo21 said:
Could you share your source please ?
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
I don't have used the CM sources: I've adapted the Galaxy Nexus image in order to run on Nexus S
spider623 said:
so you can all install it except me???
Click to expand...
Click to collapse
Why you can't install it? What's the problem?
Sensitivity said:
the wifi ain't no work for me
Click to expand...
Click to collapse
Strange, it works on my phone

about to install it, I'll play with it tonight see if I can find any bugs.
Thanks for making this

Matsca09 said:
I don't have used the CM sources: I've adapted the Galaxy Nexus image in order to run on Nexus S
Why you can't install it? What's the problem?
Strange, it works on my phone
Click to expand...
Click to collapse
both twrp and cwm just say failed, nothing else, not even a log file to check it out
found the problem, wrong permisions and corupted download, all fine now

Re: [RELEASE][WIP] Ubuntu touch port
I can report that while the wi-fi didn't work for me it was quite staple
Sent from my ASUS Transformer Pad TF300TG using Tapatalk 2

Re: [RELEASE][WIP] Ubuntu touch port
Download link is down

thanks for building this! but may i ask why this rom isnt in the development section?
also you could try and team up with woorim98 who also did a build but hasnt got wifi to work... i think your two builds together may be nearer to a 100% working one! ;D

jojoost said:
Download link is down
Click to expand...
Click to collapse
+1. wget say "509 Bandwidth Limit Exceeded"

Ok, I'm reuploading the files.
For the wifi: it's strange, now it doesn't work for me too but I was able to connect the phone to my school wifi network. Now I'll try to fix it.

Matsca09 said:
Ok, I'm reuploading the files.
For the wifi: it's strange, now it doesn't work for me too but I was able to connect the phone to my school wifi network. Now I'll try to fix it.
Click to expand...
Click to collapse
I found this
http ://casecode. ru/ubuntu-nexus-s-matsca09-port.zip

LarcBP said:
I found this
http ://casecode. ru/ubuntu-nexus-s-matsca09-port.zip
Click to expand...
Click to collapse
Sorry guys, this is a temporary URL until the author has reuploading file. :\

I've reuploaded the files!
New links are in the first post
I've updated the base system to R2 (some minor changes)
4I-I said:
thanks for building this! but may i ask why this rom isnt in the development section?
Click to expand...
Click to collapse
Because it's not so android-related, so I've preferred to post it here

any plans for the latest daily?

if is any one still monitoring this thread, cannonical said that by the end of the month ubuntu phone will be complete did you try any of the beta?

waiting for stable

FirefoxOS ported to Samsung Galaxy S2 (JellyBean 4.3)

I've finally opened the new official thread for this port:
http://forum.xda-developers.com/showthread.php?t=2612940
Thanks!
Hi,
I've been working on supporting GT-I9100 for FirefoxOS with JellyBean 4.3. This is going to be the near-future for next FirefoxOS releases so thanks to the previous work done by CyanogenMod on porting this device to JB4.3, I could ported it to FirefoxOS.
I don't have "privileges" to create a new thread on i9100 development forum and announce there all the work I've done, so in the meantime I thought that someone here could be interested in testing it and helping
Right now, the only way to have an image and installing it on you device is building it by yourself, just follow these instructions: plus.google.com/117885749590235128300/posts/cH2qU1hcLEC
I'm working on providing a precompiled image installable via CWM and hope to have those precompiled images for the weekend so stay tunned
Thanks!
Click to expand...
Click to collapse

Hello,
I've currently no time to try compiling (and i had to uninstall my linux recently...) But I will definitely keep an eye on this thread and be happy to test when you succeed to provide a precompiled image (or when I get a little time to compile it myself)
That might be a silly question but is there any chance that it works white other aosp based rom like Paranoid Android ?
Thanks for your work !

papemor said:
Hello,
I've currently no time to try compiling (and i had to uninstall my linux recently...) But I will definitely keep an eye on this thread and be happy to test when you succeed to provide a precompiled image (or when I get a little time to compile it myself)
That might be a silly question but is there any chance that it works white other aosp based rom like Paranoid Android ?
Thanks for your work !
Click to expand...
Click to collapse
Well, the dual boot can be extended to add other ROMs easily but it will take a lot of time to test them all so for now I'd stick with Cyanogenmod 10.2. Anyway, all my work is shared via github.com/atilag so any collaboration will be appreciated
I already provided a CWM installable .zip that you can find here: https : //mega.co.nz/#!0NUwEAxK!AQXMXzjmkQRiMvn6auQEEkN3sL8eOn0GFFXSRyXzdvE
Enjoy!!

ROM question
_AtilA_ said:
Well, the dual boot can be extended to add other ROMs easily but it will take a lot of time to test them all so for now I'd stick with Cyanogenmod 10.2. Anyway, all my work is shared via github.com/atilag so any collaboration will be appreciated
I already provided a CWM installable .zip that you can find here: https : //mega.co.nz/#!0NUwEAxK!AQXMXzjmkQRiMvn6auQEEkN3sL8eOn0GFFXSRyXzdvE
Enjoy!!
Click to expand...
Click to collapse
Can you tell us what are the steps for installing this rom? Flash it via CWM? Is this a dual boot rom will it have JB in it, or do you have to flash it on top of JB? What features are functioning in Firefox? Calls, sms, WIFI?

alien4friend said:
Can you tell us what are the steps for installing this rom? Flash it via CWM? Is this a dual boot rom will it have JB in it, or do you have to flash it on top of JB? What features are functioning in Firefox? Calls, sms, WIFI?
Click to expand...
Click to collapse
Yes, this is a CWM installable .zip.
It is dual-boot in case you have installed CM10.2 on it. If you don't, you won't be able to dual-boot.
I wanted to reach the necessary post count to create an official thread on developers forums fot this port, so I just used this one as a preview... this is the reason cause there's no much more information about the port in this thread
Anyway, visit the link to my G+ post and you will have further instructions, I cannot post links yet, so build it yoursefl: plus.google.com/117885749590235128300/posts/cH2qU1hcLEC
What doesn't work:
* Graphic issues (some laggy)
* No mobile-data (it connects to 3G/HSDP networks but don't transmit data)
* No Camera
* No Bluetooth
I'm working on building a new version these days, so a new release would be available soon.

Wifi works? Just making sure, great work!
Sent from my Nexus 5 using XDA Premium 4 mobile app

Not in i777 (i don't have the driver), but works fine in i9100
LeJolly said:
Wifi works? Just making sure, great work!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

Will this rom be ported to the i9100g?
Sent from my GT-I9100G using xda app-developers app

how to boot back into android
Hi Juan,
First of all thanks for the effort of porting Firefox to SGS2, I have successfully installed the zip file that you have posted and I have booted into Firefox. Like you mentioned no mobile data, no camera, no bluetooth. Voice call function ok. I have not managed to connect to a wireless yet. Can you tell me how to boot into android instead of firefox? I have installed the zip on top om CM 10.2 so dual boot should work.

alien4friend said:
Hi Juan,
First of all thanks for the effort of porting Firefox to SGS2, I have successfully installed the zip file that you have posted and I have booted into Firefox. Like you mentioned no mobile data, no camera, no bluetooth. Voice call function ok. I have not managed to connect to a wireless yet. Can you tell me how to boot into android instead of firefox? I have installed the zip on top om CM 10.2 so dual boot should work.
Click to expand...
Click to collapse
Hi, first of all, I opened a new ROM thread (and thus the official) for this port: http://forum.xda-developers.com/showthread.php?t=2612940
If you want to boot into CM10.2, you have to use adb this way:
adb shell cr.sh 1
This will reboot the phone in this very moment, and will boot into CM10.2.

skyrocket
I can't write on the official thread yet, you know how that is. Curious if anyone has tried the i727 skyrocket yet and what results. Thanks in advance.

thank
thank you

[rom][4.4.2] miui

Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.​
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download : MIUI 2.0 BETA
and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)​
Thank's to : http://techpunked.wordpress.com/

Just an FYI... On the latest TWRP this takes a long time to flash... waited almost 5 minutes for the flash to finish...

Yvan12 said:
Just sharing with you , if anybody is interested, a Beta version of MIUI for the OnePlus One.​
I flashed it successfully on my International OnePlus One and am running it right now.
ALL CREDITS GO TO ID这么难么的个人空间 (miui.com developer). You can see the original thread here:
http://www.miui.com/thread-1849318-1-1.html
My changes :
- removed Chinese apps
- removed Sougou keyboard and Baidu apps
- added Sony Keyboard
- a few minor build.prop changes
- ROM is already rooted, the MIUI permission manager works perfectly
How to flash :
1. Download OnePlus_MIUI2.0_BETA.zip and copy to your phones storage
2. Download the Gapps package and copy to your phones storage
3. Unlock bootloader and acquire custom recovery from here: https://forums.oneplus.net/threads/guide-oneplus-one-how-to-unlock-bootloader-install-custom-recovery-and-root.64487/
4. Reboot into recovery
5. Wipe data, cache, dalvik cache and sytem
6. Install OnePlus_MIUI2.0_BETA.zip
7. Reboot your phone and setup the MIUI account
8. Restart back into recovery and flash Gapps
9. Wipe Cache and Dalvik
10. Reboot into system
11. Enjoy MIUI
Screenshots (Mega folder link)​
Thank's to : http://techpunked.wordpress.com/
Click to expand...
Click to collapse
Beautiful, thanks!

Will download now..thanx !!
Sent from my One using XDA Premium 4 mobile app

livito said:
Beautiful, thanks!
Click to expand...
Click to collapse
Please don't quote OP...
Sent from my One using XDA Premium 4 mobile app

Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.

Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks

My phone stuck at 1+1 logo,cannot boot with miui,,already tried flash using twrp & philz cwm..now revert back to cm11s
Sent from my One using XDA Premium 4 mobile app

It works perfect on my phone. I'm just curious how updates will be handled.
Sent from my One using Tapatalk

Sir,can u explain to me what recovery u use?u are using bacon or a0001?
Sent from my One using XDA Premium 4 mobile app

I'm using the official TWRP.
Sent from my One using Tapatalk

On OPO Global Version
TWRP 2.7.1.0
Stock Kernel
coming from CM11S, Smooth as butter no problems so far.:good:
---------- Post added at 11:04 PM ---------- Previous post was at 10:52 PM ----------
synergeticink said:
Nice op, thank you. Have you tried going back to CM11S or restoring from a CM11S NAND backup? I'm just wondering if you ran any to any issues going back and forth between this rom. Thanks
Click to expand...
Click to collapse
Did Nand Restore to CM11S, No problemo.:good:

zephiK said:
Why is this in General instead of Android Dev?
Nice to see more ROMs on the OPO.
Click to expand...
Click to collapse
It's because it's a repost of a ROM found somewhere else on the internet and not the work of OP himself, also the text of OP is copied from that blogpost he is referring to.

Nand restore works perfectly people !!!

Installed..works perfect.. Anyway to get the cm11s camera apk?

marliv said:
Installed..works perfect.. Anyway to get the cm11s camera apk?
Click to expand...
Click to collapse
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.

I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk

Nxpx said:
Nand restore works perfectly people !!!
Click to expand...
Click to collapse
After nand restore are you getting any errors with Wifi, my wifi connectivity is good but when i go into the wifi setting its FCing.
EDIT: Never mind, the FC problem was from something else.

darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Click to expand...
Click to collapse
I always think when people answer there own question its a good idea to post the fix, to help others with potentially the same issue.

darkjedi said:
I have one major problem with this ROM (and specifically with MIUI). I can't get Bluetooth working in my Ford Focus. I get it to intially connect, but then Bluetooth on the phone force closes. I've had issues with this in the past with MIUI, so I don't know how to fix it. :\
*edit*
Found the fix. Stupid easy.
Sent from my SM-T900 using Tapatalk
Click to expand...
Click to collapse
Could you share the fix with the rest of us?
---------- Post added at 12:46 PM ---------- Previous post was at 12:38 PM ----------
dansou901 said:
Yeah. Just grab CameraNext.apk from Apps/Themes Section and install it normally. Worked for me.
Click to expand...
Click to collapse
Thx..installed,works great.. Installed screencast also working good..if u want xposed use wsm tools

[RECOVERY][TWRP][EXT4][F2FS][EXTFAT] 2.8.7.0 for Z1 Honami

Hi @ all,
i get managed to compile twrp recovery direct from source (build in cm-tree) without modding and patching. It works for me a few days now without problems.
So i decided to share it with all others
Changelog:
- 08/13/15 v2.8.7.0 - f2fs format error should be fixed now !
- 08/09/15 v2.8.7.0 - Support for f2fs added (Testing!)
- 08/06/15 v2.8.7.0 - First public build
Bugs:
- Brightness control not working - not really needed
Test:
- Tested on CM-12.1
How to flash:
Code:
fastboot flash recovery fotatwrp2870.img
Info:
- Make sure your theme is supporting 2.8.7.0 !
Download 08/06/15
Download 08/09/15
Download 08/13/15
Have Fun !!!
Big thx to all helping fixing bugs !

Hey Thanks man
Sent from my Xperia Z1 using Tapatalk

hawkeyexp said:
Hi @ all,
i get managed to compile twrp recovery direct from source (build in cm-tree) without modding and patching. It works for me a few days now without problems.
So i decided to share it with all others
Changelog:
- v2.8.7.0 - First public build
Bugs:
- Brightness control not working - not really needed
Test:
- Tested on CM-12.1
How to flash:
Code:
fastboot flash recovery fotatwrp2870.img
Info:
- Make sure your theme is supporting 2.8.7.0 !
Download
Have Fun !!!
Click to expand...
Click to collapse
Good job can you please share your sources with twrp team (contact them via freenode official twrp channel)
That will open the way to official twrp...
(I dont own a Z1 ... Just want to let you know )
Also if you want you can get the new stock theme rework (not applied yet)
Cherrypick this:
https://gerrit.omnirom.org/#/c/12728/
For some screenshots look here (it is twrp for taoshan)
http://forum.xda-developers.com/showpost.php?p=62170834&postcount=94
Hope you keep it up
Sent from my Xperia T using XDA Free mobile app

Hello @hawkeyexp, can you add f2fs support?

semson said:
Hello @hawkeyexp, can you add f2fs support?
Click to expand...
Click to collapse
Tried to include today but doesn't work at the moment Recovery doesn't boot if mkfs.f2fs is included - but i will try to fix it

hawkeyexp said:
Tried to include today but doesn't work at the moment Recovery doesn't boot if mkfs.f2fs is included - but i will try to fix it
Click to expand...
Click to collapse
add to boardconfig:
TARGET_USERIMAGES_USE_F2FS := true
but that is of no use as long as the kernel dont support f2fs....
For kernel have a look here:
https://github.com/varunchitre15/an...mmit/a864f9a7f5d5765b2078bc9ad96b11a551a6e352
And here:
https://github.com/varunchitre15/an...mmit/e83fce255ad52e6fa1070096b4881b972f97b7e0
Sent from my Xperia T using XDA Free mobile app

SdtBarbarossa said:
add to boardconfig:
TARGET_USERIMAGES_USE_F2FS := true
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
it was working for you ? tried out but no luck - ok - second try - coffee will fix it *lol*

hawkeyexp said:
it was working for you ? tried out but no luck - ok - second try - coffee will fix it *lol*
Click to expand...
Click to collapse
look what i have edited...
No it was not working for me... I never tried... Im not owning this device... Just seguest you what we have done on our device
Sent from my Xperia T using XDA Free mobile app
---------- Post added at 11:04 PM ---------- Previous post was at 11:03 PM ----------
hawkeyexp said:
it was working for you ? tried out but no luck - ok - second try - coffee will fix it *lol*
Click to expand...
Click to collapse
Ah and btw... If you build with this flag WITHOUT correct kernel... You will have to make with -i -k ... Or make will give errors
Sent from my Xperia T using XDA Free mobile app

New Version online with f2fs support.

Hello @hawkeyexp, thanks for the update. Just migrated /data and /cache to F2FS using your TWRP. Everything works fine but I got the same problem as kentexcitebot mentioned on another thread. Fixed in the same way.
Thanks again for your works!

semson said:
Hello @hawkeyexp, thanks for the update. Just migrated /data and /cache to F2FS using your TWRP. Everything works fine but I got the same problem as kentexcitebot mentioned on another thread. Fixed in the same way.
Thanks again for your works!
Click to expand...
Click to collapse
@hawkeyexp
2 ways to fix:
1.dont supply lenght to data in twrp.fstab
2. use newer make.f2fs version
(The actually used cant handle negative values)
Sent from my Xperia T using XDA Free mobile app
---------- Post added at 12:47 PM ---------- Previous post was at 12:47 PM ----------
semson said:
Hello @hawkeyexp, thanks for the update. Just migrated /data and /cache to F2FS using your TWRP. Everything works fine but I got the same problem as kentexcitebot mentioned on another thread. Fixed in the same way.
Thanks again for your works!
Click to expand...
Click to collapse
Sent from my Xperia T using XDA Free mobile app

THX for info - i will fix it tonight

Hi does it work on lollipop 5.0.2 270 build?!
Sent from my C6903 using Tapatalk

Look forward to seeing the fix.

New version with fixed f2fs format of /data online.

Hello there. I just noticed that I can't boot into Recovery anymore. This seems to happen after migrated to f2fs /data and /cache using last version (08/09/15).
I tried re-flashing another TWRP build, also did a "fastboot erase recovery", both make on difference.
Any idea?

semson said:
Hello there. I just noticed that I can't boot into Recovery anymore. This seems to happen after migrated to f2fs /data and /cache using last version (08/09/15).
I tried re-flashing another TWRP build, also did a "fastboot erase recovery", both make on difference.
Any idea?
Click to expand...
Click to collapse
Have a look here - possible your problem, too:
http://forum.xda-developers.com/showpost.php?p=62296602&postcount=1037

hawkeyexp said:
Have a look here - possible your problem, too:
http://forum.xda-developers.com/showpost.php?p=62296602&postcount=1037
Click to expand...
Click to collapse
Sorry for my late.
Probably not the same cause, I got the issue since RR 5.5.2, and I used M5 kernel which doesn't have this issue.
It seems more related to f2fs filesystem, same RR 5.5.2, it appears only after migrated to f2fs.
out of curiosity I let the phone stay at stuck splash screen, see if any miracle.
Guess what, it boots into TWRP after 60-70s... I did a few trials it all boots after 6-70s. Strange enough.

hi thanks for your work!
after changing the fs on /data or /system or /cache TWRP cannot mount them.. :/
UPDATE: it was kernel-related. sorry! i flashed M5 and the fs is retained

E:Failed to decrypt data
Click to expand...
Click to collapse
Anything that can be done here? Thanks

My list of compiled Roms for Motorola Xoom

This is the forum for the roms I compile for Motorola Xoom.
I have nicknamed these future roms Moto-Rola for personal reasons. xD
I will try to make them faster and put some cute things on them, even if I start with KitKat versions.
As you all know, I am currently using some of Schischu's sources, I am just following his hard work and making it available for everyone.
This first rom is the Cyanogenmod 11 version for Motorola Xoom Wingray you already know.
I will compile next the Everest version, you will have to try it for me if I am able to do it. I do not have the everest version of the Motorola Xoom so...
https://www.dropbox.com/sh/1fxrnv2ce8fyjyn/AABHGMZcGCYBYqtDSvMMpXC-a?dl=0
Here are the links (up here) It is a dropbox folder with everything you need.
TWRP 3.0.1 recovery with sdcard support.
CM11 for wingray
Open gapps Kitkat pico version
Open gapps Kitkat nano version
Supersu.
Omnirom 4.4.4.
Thank you for your support!
XDA:DevDB Information
Moto-Rola ROMS, ROM for the Motorola Xoom
Contributors
Manuellama
Source Code: https://github.com/Manuellama/android/blob/android-4.4/default.xml
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: BigParted Recovery
Based On: CyanogenMod 11
Version Information
Status: Stable
Current Stable Version: 4.4.4
Stable Release Date: 2017-05-06
Created 2017-05-06
Last Updated 2018-01-20

Guys with wingray should tell us if they encounter problems. I have the everest, and can't try this.

I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup

It works ok with the gapps included in the folder.

RaZz0Raus1980;72197561[/COLOR said:
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane.
---------- Post added at 10:33 PM ---------- Previous post was at 09:50 PM ----------
RaZz0Raus1980 said:
I am grabbing this to try and get my winray going for the young bloke. I'll report back
---------- Post added at 10:39 AM ---------- Previous post was at 10:18 AM ----------
loaded up fine.. but I didn't do the google account or anything as I figured I'd have to get the "fixed" apk for google play services - but installed version is 11.0.38 - I'll do a factory reset and try a full setup
Click to expand...
Click to collapse
Manuellama said:
It works ok with the gapps included in the folder.
Click to expand...
Click to collapse
FWIW:
Manuellama you are a legend.
I installed these gaaps after a reinstall of cm11 and it does work great indeed. No more stopped services bull***
Thank you so much. I was so upset about loosing my Xoom. I have an Nvidia shield k1 but the Xoom is still a great device to have around.

munecito said:
What is this fixed apk that you are talking about please?
My Xoom is getting some gaaps stopped, google services stopped, etc that is driving me insane
Click to expand...
Click to collapse
Yep - flashed those files and seems 100% perrrrfect

Hi guys, thanks for the new build!
I would like a question, do I have to follow the procedures to in "BigPart Repartition Upgrade and Resource Center by realjumy" to format for bigpart?
I have a xoom GEDfied - It had a google official release. I am not sure if it was a UMTS or CDMA device before - it has a simcard slot.
I have tried the big part process many times and with no success - in the end, when flashing the CM 11 image, it says it is not a big part device... Is it because I am using wingray images?
Thanks very much!

In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997

Manuellama said:
In the dropbox folder there is a recovery you can flash, TWRP 3.0.1. with sdcard support...I suppose you need the bigpart thing to flash it.
But here it is how they did it for bigpart.
https://forum.xda-developers.com/showthread.php?t=2506997
Click to expand...
Click to collapse
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build

jubarim said:
Yeah, I have already tried that tutorial (like 10 times) for bigpart, no success.
Maybe it is something with my hardware (I am not sure if it is gsm, cdma or wifi) - everybuild I try says I don't have bigpart partitioning.
I will wait for an everest build
Click to expand...
Click to collapse
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.

munecito said:
The easier way to know what variant is your Xoom is to check the model number at the back.
The problem you are going to have with most of the late builds is that they need big partition. So you need to find the easy to partition your tablet.
Click to expand...
Click to collapse
I will attach a picture here, I have not found the variant, I guess it is a prototype unit.
Yeah, bigpart is necessary...

https://goo.gl/photos/y8rQj2rNzU2d78PR9
@jubarim See that? My model number is mz601 (Everest) check your model number at the back of the tablet.

Thanks munecito! Mine don't have this sticker, I will post a picture tonight.

Well. It will help if you tell us if yours is a wifi only model, LTE? Where did you buy it (country)? Does it have a branded rom installed? Anything at all to identify it.
---------- Post added at 10:14 PM ---------- Previous post was at 10:08 PM ----------
kerry_xu_cs
12-02-2012, 10:47 AM |#10
Member68 posts Thanks: 13
boot into fastboot mode
plug your usb
use
fastboot getvar all
command to check the model

Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.

Manuellama said:
Uploading everest build to the dropbox folder.
I am not 100% sure it will work, but please try it and tell me.
It will take 1 or 2 hours to upload so now it is still not there.
Click to expand...
Click to collapse
About 4 hours later and still not showing. Maybe the upload was interrupted.
Can't wait to try it.:good:

My internet failed, I will upload it now.

Everest uploaded.
I think it will work, but I am not 100% since I do not have an everest xoom.
Please try it, tell me if it works so I can put it on the main post.

I am going to test Everest. But I have a problem:
In the BigPart Repartition thread they say the following:
Put all needed resources on your microsd card! You will need the original TWRP 2.6.3.0 touch recovery from @runandhide05, TWRP 2.6.3.0 BigPart version, your desired rom, and the BigPart boot image that goes with your desired rom. The BigPart boot images can be found in the next section.
Click to expand...
Click to collapse
So what versions of TWRP do I put on the SD card? The one from the beginning of the thread is BigPart version?

It is the Schischu TWRP 3.0.1 recovery with added sd card support. I always do
Fastboot flash recovery recovery.img
If recovery.img is the name of the recovery image.
I cannot guarantee it works.