Hello People of the forum,
I have a galaxy s4 which is a i9505. I had rooted it, and got a rom, then re got it back to stock everything went fine. I decided to re-root, get a rom I have cyanogen mod and when I use triangle away, and press reset flash counter, it reboots on the left top I see recovery mode, and the logo of cyanogen comes again, and I loose my cwm , and still no reset flash counter.
Thanks all for reading it, hope to get help!
Hmm!
Guys I don't know what to do. I am a new member if somebody kind enough can tell me how to contact chainfire or send him this post, I would be very grateful.
I'm not sure what a solution to your problem could be, but I just want to say please don't bump your thread after less than an hour, in fact refrain yourself from bumping if it's less than a day, I'm not being nasty, I just dislike people bumping after an hour, this board is for development, not a troubleshooting board.
Sent from my GT-I9505 using XDA Premium 4 mobile app
themadba said:
I'm not sure what a solution to your problem could be, but I just want to say please don't bump your thread after less than an hour, in fact refrain yourself from bumping if it's less than a day, I'm not being nasty, I just dislike people bumping after an hour, this board is for development, not a troubleshooting board.
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes , sorry I understand.
Triangle away ONLY works on stock kernel. There's a huge warning about it before you run triangle away.
Don't annoy Chainfire, it's working perfectly fine.
You just don't understand how to use it.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
Triangle away ONLY works on stock kernel. There's a huge warning about it before you run triangle away.
Don't annoy Chainfire, it's working perfectly fine.
You just don't understand how to use it.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for you're reply. I don't want to annoy Chainfire, he made one of the most useful apps on the market. I flashed stock kernel, still no fix, so I just went ahead and put on 4.3 which is stock from sammobile, and my knox and binary are all 0x0 and official. Although don't know why this thing happened with triangle away. I know how to use it, as it had worked for my first time, but this strange thing happened, O well, happy that my warranty aint voided and phone is back to normal, thanks for you're reply tho!
Related
So I was wondering if anyone has successfully reset there binary counter using triangle away I havent tried it yet but I no there are some risks and ive heard that when you reboot your phone the flash counter goes back to what the previous flash count was can someone please shed some light upon this subject
Force crossbred and direct injected S4
Works fine for me I'm only stock rooted though. My device status is official too.
Sent from my Sprint Galaxy S4 using Tapatalk 2
---------- Post added at 04:17 AM ---------- Previous post was at 04:14 AM ----------
This is where to get info on that app though http://forum.xda-developers.com/showthread.php?t=1494114
Chain fire has fixed triangle away for the s4. It will reset your counter to zero if you're on stock rom and stock kernel. If you're not on stock rom and stock kernel the counter will stay at 1.
Sent from my SPH-L720 using xda app-developers app
Can someone answer this? After reading a lot there is something I am still unsure of the definitive answer.... After running TA and returning counter to zero, will the counter be permanently at zero or will it start counting flashes again thereafter?
Idk but it is working properly now. Counter is zero and binary is official. Gotta be on stock ROM and stock kernel. Rooted is okay as well as hotspot mod.
Cool thanks guys I wasnt sure if I was doing sonethi wrong or what
Force crossbred and direct injected S4
troyboytn said:
Can someone answer this? After reading a lot there is something I am still unsure of the definitive answer.... After running TA and returning counter to zero, will the counter be permanently at zero or will it start counting flashes again thereafter?
Click to expand...
Click to collapse
It will reset to zero if you're on stock everything. If you use Odin after you used triangle away and trip the counter again, you ll just have to use triangle away again or select "allow tracker run" which will reset the counter every time you trip the counter.
Sent from my SPH-L720 using xda app-developers app
You have to be on stock recovery for triangle away to work. If you stay on stock recovery after using triangle away it stays at 0. If you ever put a custom recovery on it will stay at one even if you use triangle away.
Sent from my Sprint Galaxy S4 using Tapatalk 2
I'm on oudhs recovery and it reset everything fine, even after reboots. No, I don't have persistent checked either.
GiantJay said:
You have to be on stock recovery for triangle away to work. If you stay on stock recovery after using triangle away it stays at 0. If you ever put a custom recovery on it will stay at one even if you use triangle away.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Click to expand...
Click to collapse
I was gonna go into Best Buy today because my dual shot wasn't working but then I factory reset and dual shot started working. So it musta been a mod I installed that caused it to not work, now it's time for some detective work to find the culprit! I did Triangle Away before I did the factory reset and I'm on TWRP and worked perfectly for me!!
Joe0113 said:
I was gonna go into Best Buy today because my dual shot wasn't working but then I factory reset and dual shot started working. So it musta been a mod I installed that caused it to not work, now it's time for some detective work to find the culprit! I did Triangle Away before I did the factory reset and I'm on TWRP and worked perfectly for me!!
Click to expand...
Click to collapse
Hmm that's good that it stayed reset. I thought it didn't though. Maybe the update fixed it. But that's good though.
Sent from my Sprint Galaxy S4 using Tapatalk 2
sorryihaveaids said:
It will reset to zero if you're on stock everything. If you use Odin after you used triangle away and trip the counter again, you ll just have to use triangle away again or select "allow tracker run" which will reset the counter every time you trip the counter.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
GiantJay said:
You have to be on stock recovery for triangle away to work. If you stay on stock recovery after using triangle away it stays at 0. If you ever put a custom recovery on it will stay at one even if you use triangle away.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Click to expand...
Click to collapse
Thanks guys. Great info. That answers my questions completely
so i am on twrp recovery, stock rom deodexed and ktoonz kernel and when i use triangle away it still says my custom binary counter is 6 it didnt change it at all any ideas. it goes through download mode and triangle away mode but nothing seems to happen when i do it
GiantJay said:
Hmm that's good that it stayed reset. I thought it didn't though. Maybe the update fixed it. But that's good though.
Sent from my Sprint Galaxy S4 using Tapatalk 2
Click to expand...
Click to collapse
Nope.... it was KT SGS4 kernel that was causing the problem. It's a known issue that I didn't know about -__- :banghead: using the 6-10-13 version now and it's fine!
The triangle away warning screens state that you need to be on stock rom and kernel in order for everything to reset as it should. If you don't follow the suggestions of ta, then don't get upset if you don't get the results you were hoping for.
Im not getting upset I have heard of a few people that did the counter reset with custom software and it worked I was going to try that next
Sent from my SPH-L720 using xda premium
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time.
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
Note:This will upgrade your phone to 4.3 and there are no root methods for 4.3 as of right now.Plus there might be some problems with the playstore.(i haven't encounter any yet)
Also remember that you can go to bestbuy and ask them to flash your phone so you can stay on 4.2.2. This is for people who just want to fix it now instead of going to a store.
Credit to jball and rayburne for telling me to put the downsides and other opitions
Cool deal buddy
Sent from my GT-I9505 using XDA Premium 4 mobile app
Odischeese said:
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time!!!!!!
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
And now i have recovery!
Not just recovery, but i have my phone back!!!!
Click to expand...
Click to collapse
isn't that the leaked 4.3 fw?
xuanphucn said:
isn't that the leaked 4.3 fw?
Click to expand...
Click to collapse
Yes and it works like a charm.
I still have no clue why it can flash with odin if you're on MF3, regardless i am happy with it as it is the only rom that you can flash (that i know of) if you're on MF3.
Just a word of caution to anybody who wants to try this, there is no root method for it and playstore is having some issues installing some apps.
Edit, here's the thread discussing mj6 and some of the issues people are having http://forum.xda-developers.com/showthread.php?p=46860747
Playstore?
jd1639 said:
Just a word of caution to anybody who wants to try this, there is no root method for it and playstore is having some issues installing some apps.
Click to expand...
Click to collapse
I am having no problems with the playstore as of right now.I'm downloading over 4gb of apps right now. I'll post back if there's any problems.:good:
After downloading 4GB of apps, there were no problems.
Odischeese said:
Yes and it works like a charm.
I still have no clue why it can flash with odin if you're on MF3, regardless i am happy with it as it is the only rom that you can flash (that i know of) if you're on MF3.
Click to expand...
Click to collapse
I'm MF3 as you know and I'm using Omega V12 4.2.2 and it's a rom .I use Safestrap with no problems
Sent from my GT-I9505 using XDA Premium 4 mobile app
jball said:
I'm MF3 as you know and I'm using Omega V12 4.2.2 and it's a rom .I use Safestrap with no problems
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes but i was talking about flashing with odin though
Some people with the MF3 problem couldn't even get to their stock recovery like me:crying:
This is the only ROM i know of that you can flash with odin on MF3.
Even if you don't have a stock recovery you should have been able to use Safestrap. I don't have stock recovery
Sent from my GT-I9505 using XDA Premium 4 mobile app
jball said:
Even if you don't have a stock recovery you should have been able to use Safestrap. I don't have stock recovery
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was ****ed big time. I did install SS but like i told you yesterday, SS ****ed up the wiping and it looked like SS just deleted itself. The reason why i said that because SS never came up. My phone never could go past the bootlogo nor bring up the 2 SS options. If i had SS at the time then i would of never came to forums lol
Odischeese said:
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time!!!!!!
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
And now i have recovery!
Not just recovery, but i have my phone back!!!!
Click to expand...
Click to collapse
Odischeese said:
I was ****ed big time. I did install SS but like i told you yesterday, SS ****ed up the wiping and it looked like SS just deleted itself. The reason why i said that because SS never came up. My phone never could go past the bootlogo nor bring up the 2 SS options. If i had SS at the time then i would of never came to forums lol
Click to expand...
Click to collapse
I'm glad you were able to fix your phone and share with other to help them out, but I feel this title is a little misleading.
Yes you are fixing a soft bricked MF3 phone but the fix is upgrading them to MJ6 4.3. I understand a fixed MJ6 phone is better than a broken MF3 phone but I think it should be mentioned in your instructions. Best Buy is an alternative to fixing your phone and remaining on 4.2.2. Maybe a fix is around the corner for MF3 soft bricks that won't apply to MJ6 devices (yes I agree high unlikely but it should be mentioned this is upgrading the user to 4.3).
Sorry to hear your troubles with Safestrap. I'm on MF3 using SS and not had a problem. I think I have installed most of the 4.2.2 ATT and International Roms without issue. With what you described above about SS, I can only guess that SS has a bug that you encountered that affected your stock slot or you mistakenly wiped or flashed something to your stock slot that hosed your MF3 stock slot. Either way glad you recovered and shared your fix.
rayburne said:
I'm glad you were able to fix your phone and share with other to help them out, but I feel this title is a little misleading.
Yes you are fixing a soft bricked MF3 phone but the fix is upgrading them to MJ3 4.3. I understand a fixed MJ3 phone is better than a broken MF3 phone but I think it should be mentioned in your instructions. BB is an alternative to fixing your phone and remaining on 4.2.2. Maybe a fix is around the corner for MF3 soft bricks that won't apply to MJ3 devices (yes I agree high unlikely but it should be mentioned this is upgrading the user to 4.3).
Sorry to hear your troubles with Safestrap. I'm on MF3 using SS and not had a problem. I think I have installed most of the 4.2.2 ATT and International Roms without issue. With what you described above about SS, I can only guess that SS has a bug that you encountered that affected your stock slot or you mistakenly wiped or flashed something to your stock slot that hosed your MF3 stock slot. Either way glad you recovered and shared your fix.
Click to expand...
Click to collapse
Yeah I was just a little over exited finding a fix and quickly made a title.
I'll edit the instructions a little more...
Thanks for catching my mistakes :good:
Odischeese said:
Yeah I was just a little over exited finding a fix and quickly made a title.
I'll edit the instructions a little more...
Thanks for catching my mistakes :good:
Click to expand...
Click to collapse
Naw man, I'm not claiming you made any mistakes :good:
Just trying to help others who read the OP to fully understand the fix.
I'm just glad you found an alternative fix to Best Buy and shared it with others!
rayburne said:
Naw man, I'm not claiming you made any mistakes :good:
Just trying to help others who read the OP to fully understand the fix.
I'm just glad you found an alternative fix to Best Buy and shared it with others!
Click to expand...
Click to collapse
Ahh ok
what do you think i should rename the title btw???
"Optional fix to a MF3 brick" point of no return
Sent from my GT-I9505 using XDA Premium 4 mobile app
Thanks man, you got me back up and running... I know it's not ideal but it works...
jball said:
"Optional fix to a MF3 brick" point of no return
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
"Optional fix to a MF3 brick point of no return"
the entire quote???
Sure
Sent from my GT-I9505 using XDA Premium 4 mobile app
Hello all Xda members, I think I need some help with rooting Galaxy Note 3 [N9005XXUDMJ7[ because I am having some problems which makes me very very sick While everybody with this phone root easily I am stuck at the start screen and it does not boot.In this screen It says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I've used Odin 1.85 to CF Auto Root this device. It says "PASS" on the program , but after the device stucks on the screen I mentioned above .It does not boot after that ; nothing loads too.
I really need someone to save me from this .
Goodluck
Sent from my SM-N9005 using Tapatalk
strawberycake said:
Hello all Xda members, I think I need some help with rooting Galaxy Note 3 [N9005XXUDMJ7[ because I am having some problems which makes me very very sick While everybody with this phone root easily I am stuck at the start screen and it does not boot.In this screen It says
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I've used Odin 1.85 to CF Auto Root this device. It says "PASS" on the program , but after the device stucks on the screen I mentioned above .It does not boot after that ; nothing loads too.
I really need someone to save me from this .
Click to expand...
Click to collapse
Use this older file on odin.
It's said pass so it's complete. Either use the older version hey_joe has posted and untick auto reboot. Or try this way >
Once it's rooted and said pass. Turn the phone off, and try and go into recovery then reboot the device. It should boot into Android.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Man do I owe you guys a drink, I signed up just now, just so I could tell you that too!!
I had the exact same issue as strawberry cake and I thought my phone was toast!
Just redid all the steps with the older file, and I have a phone again, a more sweaty brow too...
I wasn't sure if I had signed up before and it took me a while to figure out that I hadn't, and some of them captcha's are ****ing difficult to read!!
But I was determined to get on here and say a thank you to you guys for your most excellent advice.
Although now that I've done that I see I need to enter more captchas just to post, I could be here a while at this rate.
In any case, thank you hey_joe and radicalisto.
Also if anyone else comes across this problem all I did was follow the advice in hey_joe's thread and got my phone back...
bazzertron said:
Man do I owe you guys a drink, I signed up just now, just so I could tell you that too!!
I had the exact same issue as strawberry cake and I thought my phone was toast!
Just redid all the steps with the older file, and I have a phone again, a more sweaty brow too...
I wasn't sure if I had signed up before and it took me a while to figure out that I hadn't, and some of them captcha's are ****ing difficult to read!!
But I was determined to get on here and say a thank you to you guys for your most excellent advice.
Although now that I've done that I see I need to enter more captchas just to post, I could be here a while at this rate.
In any case, thank you hey_joe and radicalisto.
Also if anyone else comes across this problem all I did was follow the advice in hey_joe's thread and got my phone back...
Click to expand...
Click to collapse
Glad we could help
how about seandroid on kitkat bootloader? i wasnt able to flash custom kernels for stock rom 4.4.2. can someone please explain? because after i flashed custom kernels with permissive selinux, the phone wont boot up.
Sent from my SM-N9005 using XDA Premium 4 mobile app
jamesmuking5 said:
how about seandroid on kitkat bootloader? i wasnt able to flash custom kernels for stock rom 4.4.2. can someone please explain? because after i flashed custom kernels with permissive selinux, the phone wont boot up.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Which custom Kernels did you try? - I am using a custom kernel on KK now and my phone is working fine.
radicalisto said:
Which custom Kernels did you try? - I am using a custom kernel on KK now and my phone is working fine.
Click to expand...
Click to collapse
what custom kernel do u use? sorry im bad at note 3 stuff
Sent from my SM-N9005 using XDA Premium 4 mobile app
Wasn't the question, but I use this
radicalisto said:
Wasn't the question, but I use this
Click to expand...
Click to collapse
yes i used the exact same one. but when i booted up the phone after flashing the kernel, the bootsplash showed seandroid not enforcing and something about warranty with yellow words. do i need to do something specifically to make sure selinux permissive recoveries and kernels work? thanks so much
Sent from my SM-N9005 using XDA Premium 4 mobile app
jamesmuking5 said:
yes i used the exact same one. but when i booted up the phone after flashing the kernel, the bootsplash showed seandroid not enforcing and something about warranty with yellow words. do i need to do something specifically to make sure selinux permissive recoveries and kernels work? thanks so much
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When you use a custom recovery or a custom kernel you will get that, it's normal, means you aren't using a Samsung signed recovery/kernel. - the custom kernel comes permissive by default.
jamesmuking5 said:
yes i used the exact same one. but when i booted up the phone after flashing the kernel, the bootsplash showed seandroid not enforcing and something about warranty with yellow words. do i need to do something specifically to make sure selinux permissive recoveries and kernels work? thanks so much
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you are using KK get the latest 1.5 then flash it via recovery, The writings are normal
ok thanks guys i figured out finally after whole day crapping on it. its like if i do a wipe data reset then only it works but thanks so much for supporting me. thanks.
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi jamesmuking5,
I Try to root my galaxy Note3 N9005 with the new version of android Kit Kat (4.4.3) with this method : (true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html) (sorry I can't add url link, you have to add http) and I have the message you explain "Recovery is not Seandroid Enforcing" and the root doesn't work.
I don't exactly understand you last Answer : If a do a wipe data reset before, this root procedure will works ?
Thanks
THANK YOU!
hey_joe said:
Use this older file on odin.
Click to expand...
Click to collapse
I honestly thought I had buggered my two day old Note 3!... thank you so much for posting this file, saved my ass and made me a very happy bunny!
pwhitrow said:
I honestly thought I had buggered my two day old Note 3!... thank you so much for posting this file, saved my ass and made me a very happy bunny!
Click to expand...
Click to collapse
Np. Enjoy your toy
Sent from my SM-N9005 using xda app-developers app
hey_joe said:
Np. Enjoy your toy
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Like a couple other guys on this thread, I also became a member here purely to say thanks for the fix provided by hey_joe.
If anyone else with the same problem is reading this, just get the Odin version hey_joe posted on the first page.
Remember that you need to go into download mode (Volume Down + Power + Home) again to escape that 3-color, 3-line SEANDROID screen-lockup before you can interface with the older/better version of Odin.
Just adding this comment as it took me a few minutes to understand why Odin couldn't see the phone again. (Why yes, I *am* new to this whole rooting business) ...
All is good now and I confirmed the phone is now rooted with Root Check from Google Play.
Now to delete all this bloatware, specifically the pesky CloudAgent app that kept screwing up my ability to work with the Gallery. The popup "CloudAgent has stopped" has been the bane of my Note 3 existence for the last few days ...
radicalisto said:
Glad we could help
Click to expand...
Click to collapse
I had exactly same problem on the same device, and you guys saved me !! Thanks a lot!!
I have the same thing but my phone works. It only tells me that it's not enforcing seandroid when I go into recovery. Is that normal or did my recovery not install correctly? I can use it to flash files, do backups and such so I think it's working normally. The only issue is that I coulnd't get TWRP to work, I had to find the apk on my Note 2 and flash CWM Touch to have custom recovery and every time I go to reboot from there it says that it needs to fix my root. I haven't seen anything on it, so if I am in the wrong location please direct me to where I need to go. Rooting and all isn't new to me, been doing it since I got my EVO 4G when it was released, but I am by far no expert. This KNOX crap has me kinda flustered. The root appears to stick, I can use ROM Toolbox and do what I want it to do, root checker says I have root and all, just curious about the seandroid stuff and saw this post.
So I was trying to help a friend flash stock using Odin because his phone app was being a piece of crap, he was on a CM 11 nightly and, well, long story short I almost bricked his phone not knowing there is a limit on how many times you can flash a Samsung device using Odin because of the yellow triangle. I can't use triangle away because it's the CM ROM on a CM kernel, I was able to get rid of the softbrick by using a older CM ROM on his SD card, this wouldn't be a problem if his phone app was still working, his WiFi was working and if his sound was working, but it's not. So to recap and for the question, Samsung is stupid, and can anyone help?
Thanks in advanced
Sent from my awesome LG-E980
lonlyhornet said:
So I was trying to help a friend flash stock using Odin because his phone app was being a piece of crap, he was on a CM 11 nightly and, well, long story short I almost bricked his phone not knowing there is a limit on how many times you can flash a Samsung device using Odin because of the yellow triangle. I can't use triangle away because it's the CM ROM on a CM kernel, I was able to get rid of the softbrick by using a older CM ROM on his SD card, this wouldn't be a problem if his phone app was still working, his WiFi was working and if his sound was working, but it's not. So to recap and for the question, Samsung is stupid, and can anyone help?
Thanks in advanced
Sent from my awesome LG-E980
Click to expand...
Click to collapse
First thing you have to do for anyone to help you is,provide which build you were on and which stock rom you were trying to flash. There are tons of people here with great knowledge if you can be real specific.
Sent from my Nexus 5 using Tapatalk
So you wanna go to complete stock on a sprint s4?
Sent from my SPH-L720 using XDA Premium 4 mobile app
Fairly sure there is no limit to the amount of times you can flash using Odin. There is a counter but no limit
Sent from my SPH-L720 using xda app-developers app
Sorry, Samsung isn't stupid or they wouldn't just magically be a $250+billion dollar company that has been around for 76 years.
Because you jumped in and were unsuccessful with what you were doing doesn't constitute failure on their part.
How about taking that phone - S4 back to bone stock. ALL the answers on how to do that are here. In fact in the last couple days I've personally given instructions on how to do that for a number of people here in the help section. Do some searching and reading and you'll find your answers.
It always helps to come to a manufacture's section and say how sh**y they are. Makes those of us who choose to use and support them feel ever so helpful.
Ok sorry should've been more specific, I'm not new to these forums I was just in a hurry, also seriously guys I'm just frustrated I know Samsung is not stupid you don't have to post their history, they're awesome it's just dumb that they have a limit, and yes if you install the latest stock Sprint update (the one I did before I rooted and rom'd his phone) there wouldn't be a thing such as triangle away. Anyway on Odin it says it passed when flashing stock (the firmware that comes with the phone) but it does it in 4 seconds, and when his phone boots up and it just restores CM, so far everything we've tried either softbricks it or restores CM. Is there anything that completely and I mean completely restores this phone
Sent from my awesome LG-E980
lonlyhornet said:
Ok sorry should've been more specific, I'm not new to these forums I was just in a hurry, also seriously guys I'm just frustrated I know Samsung is not stupid you don't have to post their history, they're awesome it's just dumb that they have a limit, and yes if you install the latest stock Sprint update (the one I did before I rooted and rom'd his phone) there wouldn't be a thing such as triangle away. Anyway on Odin it says it passed when flashing stock (the firmware that comes with the phone) but it does it in 4 seconds, and when his phone boots up and it just restores CM, so far everything we've tried either softbricks it or restores CM. Is there anything that completely and I mean completely restores this phone
Sent from my awesome LG-E980
Click to expand...
Click to collapse
Where are you getting this idea there is a limit on Odin flashes?
Sent from my SPH-L720 using xda app-developers app
There is no limit, as mentioned already, with Odin.
I've used it probably a hundred times since I got my S4. I know others have used it more.
Take some time, look through the Q&A/help forum and you'll see some posts I've helped others with, in the last 24hours alone, on how to get back to stock.
Edit:
Okay read this post. It'll get you to stock. Just read the instuctions on how to do it.
Ok I'll try it thanks for tolerating me I can be hard to understand when panicking
Sent from my awsome LG-E980
leaderbuilder said:
There is no limit, as mentioned already, with Odin.
I've used it probably a hundred times since I got my S4. I know others have used it more.
Take some time, look through the Q&A/help forum and you'll see some posts I've helped others with, in the last 24hours alone, on how to get back to stock.
Edit:
Okay read this post. It'll get you to stock. Just read the instuctions on how to do it.
Click to expand...
Click to collapse
Did it and it worked thanks man! sorry for being rude I was just worried that I may have ruined my friends phone.
lonlyhornet said:
Did it and it worked thanks man! sorry for being rude I was just worried that I may have ruined my friends phone.
Click to expand...
Click to collapse
Glad you got it working and THANK YOU for posting back - that is what helps the community.
I understand the panic too. Especially when things are f'd up.
But if there is one valuable lesson I've learned in my half century of life; if you can just pause, relax and step back, many problems are easily resolved. And better yet more avoided by haste.
Good luck with the new phone setup.
OK one more quick thing, we flashed it successfully but now it won't boot its been over an hour after we flashed and its stuck on the Sprint logo
lonlyhornet said:
OK one more quick thing, we flashed it successfully but now it won't boot its been over an hour after we flashed and its stuck on the Sprint logo
Click to expand...
Click to collapse
You can first boot to stock recovery (power on + volume up) and choose a 'factory reset'. That often clears stuff up pretty well
Or
Try and PC Oding a stock MK2 kernel. Then battery pull and restart after. Saw this on a few phones
I'll have to search to find it but it's here somewhere.
leaderbuilder said:
You can first boot to stock recovery (power on + volume up) and choose a 'factory reset'. That often clears stuff up pretty well
Or
Try and PC Oding a stock MK2 kernel. Then battery pull and restart after. Saw this on a few phones
I'll have to search to find it but it's here somewhere.
Click to expand...
Click to collapse
Thanks! Factory resetting worked his phone is back on stock and ready for 4.4.2 thanks for the help LeaderBuilder!
lonlyhornet said:
Thanks! Factory resetting worked his phone is back on stock and ready for 4.4.2 thanks for the help LeaderBuilder!
Click to expand...
Click to collapse
Great!
Sent from my SPH-L720 using XDA Premium 4 mobile app
I hate to do this but I'm in a rush here don't shoot me...
I am having a hell of a time trying to get TWRP recovery installed.. I have a AT&T SGH-I337 4.4.2 stock rom (rooted).
Tried every way thru TWRP manager no dice...
What is the trick????
Ok EDIT:
Found out i can't use TWRP on NC1 will look into safestrap. mod you can close this thread or delete.
Thanks
Dude, in the future don't post the same problem in so many place. Oeut makes it very difficult to know if you still have a problem and help you. Just saying
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Dude, in the future don't post the same problem in so many place. Oeut makes it very difficult to know if you still have a problem and help you. Just saying
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm with ya 100% I was just in a huge rush I needed to get this phone fixed fast and get it back to my sister and brother in law. I would have never done it otherwise.
I tried to update all the posts accordingly, I will make sure they are showing that I have solved the issue.
Thanks,