Database Users

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:

You're welcome, mate!

Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !

budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?

Thanks a lot. Without your post, my phone will still be bricked.

hh
That day! ! Me too

Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4

uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.

lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks

@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went

doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?

3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.

pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?

doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.

1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255

Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

Update to Android 4.4 KitKat (GT-i9505)

Hi Guys,
I wanted to update to the new Android 4.4 KitKat but have a few questions before doing so and i was hoping a few of you on here could give me some insight / heads up.
My phone is currently rooted.
Currently Running:
Model:
Samsung Galaxy S4 (i9505)
Android Version:
4.2.2
Baseband Version:
I9505DVUBMG1
What's the best link to download all the correct stuff for Android 4.4 KitKat? And it is possible to do it on my phone correct?
Thanks!

hamzzzzz said:
Hi Guys,
I wanted to update to the new Android 4.4 KitKat but have a few questions before doing so and i was hoping a few of you on here could give me some insight / heads up.
My phone is currently rooted.
Currently Running:
Model:
Samsung Galaxy S4 (i9505)
Android Version:
4.2.2
Baseband Version:
I9505DVUBMG1
What's the best link to download all the correct stuff for Android 4.4 KitKat? And it is possible to do it on my phone correct?
Thanks!
Click to expand...
Click to collapse
depends on what rom youre looking to run, theres plenty guides on here, or i can email you all required files for omega v21 4.4.2 including bootloader and modem files,

andy1weir said:
depends on what rom youre looking to run, theres plenty guides on here, or i can email you all required files for omega v21 4.4.2 including bootloader and modem files,
Click to expand...
Click to collapse
A link to a guide to install 4.4.2 would be nice, what's the best ROM to install currently?
Thanks

andy1weir said:
depends on what rom youre looking to run, theres plenty guides on here, or i can email you all required files for omega v21 4.4.2 including bootloader and modem files,
Click to expand...
Click to collapse
Andy I had Omega v21 but the wifi wouldn't turn on and Security force closed Settings. Omega's BL file isn't partitioned for Odin to see and the latest BL didnt work for me. Any suggestions?

dincroot said:
Andy I had Omega v21 but the wifi wouldn't turn on and Security force closed Settings. Omega's BL file isn't partitioned for Odin to see and the latest BL didnt work for me. Any suggestions?
Click to expand...
Click to collapse
theres two files you have to flash for omega v21, before installing the rom, the bootloader and modem below is the link to the post, youll find the instructions there just make sure you flash both the files via odin before flashing the rom via custom recovery

[Q] Flashing GT-i9505G firmware on original S4 possible?

Hey all,
I have my Galaxy s4 (wich I LOVE) since a year now.
I have the vanilla android ROM running on my s4.
Since I really love this rom more tham TW; I'm wondering if it would be possible to download the stock rom (instead of a custom ROM) from the Google Play edition on my s4. (Maybe with odin or something?) since it has exactlly the same hardware.
So, do you think it is possible? And if it is; How?
Thanks in advance;
David.

Yes u can back your stock again. It's a odin method when u will do this thing u lost all your root and recovery data. (Make sure install your device firmware.)go to sammobile for download u r firmware.
follow this instruction for reflash.
1.Extract (unzip) the firmware file
Download Odin v3.09
2.Extract Odin zip-file
Open Odin v3.09
3.Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
4.Connect phone and wait until you get a blue sign in Odin
5.Add the firmware file to AP / PDA
6.Make sure re-partition is NOT ticked
7.Click the start button, sit back and wait a few minutes
8.After this wipe and clear all user data.
Sent from my GT-I9500 using XDA Premium 4 mobile app

D4vid1011 said:
Hey all,
I have my Galaxy s4 (wich I LOVE) since a year now.
I have the vanilla android ROM running on my s4.
Since I really love this rom more tham TW; I'm wondering if it would be possible to download the stock rom (instead of a custom ROM) from the Google Play edition on my s4. (Maybe with odin or something?) since it has exactlly the same hardware.
So, do you think it is possible? And if it is; How?
Thanks in advance;
David.
Click to expand...
Click to collapse
no you can not do that they dont have the same bootloader and if you try this you can brick your phone

Quote myself from another post:
[ROM][UPDATE][26/06] dandroid13's Untouched GPe - [4.4.4] [w/ KT kernel] [FINAL]
...If you want root, flash SuperSU (link above)...
Click to expand...
Click to collapse
And you can give Stock Kernel a try ...

[HELP]SAMSUNG N900L Galaxy Note 3 FLASHING FOR NEWBS LIKE ME

Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:

macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
1. You can download the latest firmware for your device: HERE. Follow the pics attached (The download is slow like a turtle but be patient).
2. These firmware package is one package. Download, unzip it and flash it then using odin tool to brush into the radio PDA. Lil GUIDE: HERE.

hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033

macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse
Seems all ok. Why you don't update your phone via OTA?

I'm going to try flashing it using Arya Mod v1.7 what kernel should I use ?

n900p
I have the same basebank k1..... did this stock work perfect...

Un-bricked Galaxy Note 3 (SM-N900L) on KitKat 4.4.2 - N900LKLUFNK1:
* Download link: http://youtu.be/FGoqxX3BwA0
* Flash by ODIN 3.07 or up
* Based on Official Firmware N900LKLUFNK1
* Android version KitKat 4.4.2
* Rooted by SuperSU 2.45
* KNOX Removed
* Fixed all Korean:
- Removed Korean characters on Dial Pad
- Add (+) sign for International call on (0) Dial Pad
- Removed all Korean apps
- Fixed Network Mode (2G/3G/LTE/Auto)
- 90 languages + ASOP for EUROPE
* Facebook::https://www.facebook.com/pages/Galaxy-Note-3-LTE/749184655174799
macoyism said:
hi sir here's my phone details i'm a noob
is the firmware here?
Model Number: SM-N900L
Android Version: 4.4.2
Baseband version: N900LKLUFNK1
Kernel Version: 3.4.0-3171410 [email protected] #1
Build Number: KOT49H.N900LKLUFNK1
SE for Android Status: Enforcing SEPF_SM-N900L_4.4.2_0033
Click to expand...
Click to collapse

User wants $ 25 for the password to the archive...

Don't join XDA if you wanted to get Paid... Trust me.. you will get nothing
Regards

macoyism said:
Hi!, I would like to ask for your help guys I'm planning to flash my SAMSUNG N900L Galaxy Note 3 could anyone help me what to flash? and what not to? Thanks :angel:
Click to expand...
Click to collapse
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.

So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris

Hokage-Sama said:
Same problem with me.I have the same korean varient with LG u+ logo. I am using it in Pakistan. Read almost every thread regarding korean variants but there is'nt any method specific for SM-N900L.
Click to expand...
Click to collapse
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
cmro said:
So are you wanting to flash a custom recovery e.g. twrp and then install a custom rom?
Sorry if I misunderstood your question.
Chris
Click to expand...
Click to collapse
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot

ab.normal said:
Hello, new here and was trying to do the same thing on my SM-N900L unit, i want to install a custom ROM so i can remove all of those korean apps and fix the API for my network.
Hello Chris,
same here, if anyone can post some procedure on how we can install custom firware and rom on our SM-N900L unit that is under Lollipop.
thanks a lot
Click to expand...
Click to collapse
Do you have a custom recovery and is your mobile rooted?

Hokage-Sama said:
Do you have a custom recovery and is your mobile rooted?
Click to expand...
Click to collapse
Hello Hokage-Sama,
i think the custom recovery installed is TWRP
did some further searching online and i was able to restore the firmware from lollipop down to kitkat, from there i was able to download a md5 file which i ran from Odin and i was able to root the phone however, its based on kitkat and im still searching if there are any for lollipop and the only one i see if the 1 poser who asks for a $25 payment to update a N900L to N9005.
... was hoping if i can use Aryamod custom rom but i think my phone should be on a rooted lollipop under N9005 model only.
hope this made sense
thank you

Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.

audit13 said:
Root is not required to install a custom rom.
If your phone can run 9005 ROMs, you could try editing the updater script to include your phone.
Click to expand...
Click to collapse
hi, thanks for the reply
apologies i dont know what you meant to edit hte updater script.
Sorry i have a N900L and based on reading some other threads only
DarkLord Note 5 RC2.1 or Phronesis v5.1 will work on my unit.
before installing the rom i should have a custom recovery right? but to get a custom recovery my bootloader needs to be unlocked first.
i am currently stuck on unlocking my bootloader, i downloaded samsung usb drivers, go to recovery mode, then insert the usb on the phone, i hear a sound when you connect a device on the pc and saying that the device is ready to use but i am unable to see the contents of my phone.
am i doing it correctly?
thank you once again

Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614

audit13 said:
Are you sure the phone's bootloader is locked? If the bootloader is not locked, do not use any unlocking apps because this will proably brick the phone.
Just install TWRP from Odin. I don't recommend Philz Touch or CWM as I don't they have been updated for a while.
http://forum.xda-developers.com/gal...ecovery-twrp-materialized-dark-light-t3153614
Click to expand...
Click to collapse
i tried the twrp custom recovery based on the link you sent above thru Odin, it messed up my custom recovery, when i tried to go there it said something like unable to load recovery and goes to download mode and the phone wont startup normally.
is that a sign that my bootloader is locked since i cant install the custom recovery?
used my standard backup recovery to bring back the phone.
i wonder how other SM-N900L users installed their roms.
any other help would be greatly appreciated
thanks a lot

When you flashed twrp, did Odin say the installation was successful?
Download the tar version of twrp for your device from here: twrp.me .
In Odin, do not check anything except f.reset time. Flash twrp and, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds, replace battery, now use button combination to boot into recovery.

thanks for the help, was finally able to install twrp custom recovery. the latest version wont work on SM-N900L, i used TWRP-2.8.6.0-N900S version and it worked! im now running on Darklord N5 custom rom for Note3 and loving it!!!

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.

Download Stock firmware from sammobile for your phone and flash it with ODIN.

dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?

I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.

Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.

dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!

Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.

Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?

Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom

Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>

Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?