I was working on the defy+ ME525 but i had noticed that i flashed a sbf, from MB525 and i tried a everything to get it from black screen mode i looked for a Chinese sbf and still not coming back the white led its on but i have charged it with and universal charger i need help dont know what to do..
we need more help to get the defy+ ME525 since i been checking on the forums i only find post for the defy MB525 hope some can help me...
please ....
Flash dfp231 sbf
Sent from my MB526 using Tapatalk 4
My friend i been there before.. What you need to do its make sure you have you battery at 50% or more then you remove the battery press power and volume up while placing the battery back it will go to flash mode download RSD Lite v5.3.1 the you will download the firmware. Sbf about 361 mb here is my email [email protected]
Sent from my ONE TOUCH 4033X using xda app-developers app
Related
I have a Motorola Defy Green Lens and I cannot root it using superoneclick 2.3.3--it just goes to NOT RESPONDING when I click on ROOT. I may have used the wrong SBF for my defy. So can any one please help me find the correct SBF for my device so I can root it and use roms like cm7, cm9 and miui? Please... Help....
:crying:
:crying:
Have you used droid3root?
Have a Google and you'll find it.
I'm on 2.3.4 and I use something called Pete's Motorola Root Tools
Sent from my MB525 using xda app-developers app
Led Problem after successful root and flashing of CM9
NI55AN said:
Have you used droid3root?
Have a Google and you'll find it.
I'm on 2.3.4 and I use something called Pete's Motorola Root Tools
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Pete's motorola tools worked! I managed to get CM9 but the led is too dim now, would that be because of the chinese SBF that I flashed? Thanks!!!!!
hi all i hope someone can help i have read other threads and tried the solutions but to no avail i have a defy and tried flashing it with a stock rom due to missing android files i got the phone off ebay, i am now in a position where when i turn on there is no m logo just straight to bootloader 09.10 with code corrupt and rsd wont succesfully flash any files to it i am severlyt atuck any help really appreciated.
What sbf did you flash?
Sent from my MB526 using Tapatalk 4 Beta
Flash dfp231. This sbf should work 99%
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash dfp231. This sbf should work 99%
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
u got a link for that sbf please
dbmbrown1 said:
u got a link for that sbf please
Click to expand...
Click to collapse
also i tried quite a few different sbf
Search for this thread called defy bl7 root, it will have the links(there are two such threads, use the one with faster mediafire links)
Sent from my MB526 using Tapatalk 2
thekguy said:
Search for this thread called defy bl7 root, it will have the links(there are two such threads, use the one with faster mediafire links)
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
still no joy im having a nightmare i keep having to mvgyver which works ok, but rsd wont recognise my phone i have only bootloader no m logo or anything everytime i try flash im getting groupsum errors n fail ive tried all thr sbf mentioned in threads im so so stuck id pay someone to flash n sort it at this rate
If your getting checksum errors then all you can do is try another pc or cable, if it doesn't work then I'm not aware of any software means to revive the phone
Sent from my MB526 using Tapatalk 2
a friend of mine gave me his bricked defy and asked me for help.
it will not turn on at all but when i connect it to my pc the white led turns on and it's recognized by rsd-lite.
as always, i flashed JORDN_U3_97.21.51.sbf which always does the trick, but this time it did the same thing as any other sbf - nothing.
i tried searching of answers but eventually every advise i found was to flash JORDN_U3_97.21.51.sbf...
any help would be appreciated.
Does it display any error after flashing.?
Sent from my XT912 using Tapatalk 2
nothing, just returns to same condition it was.
You sure the battery is charged enough for a flash.?
Sent from my XT912 using Tapatalk 2
yes, i charged it with another defy. about 70%.
try this
http://forum.xda-developers.com/showthread.php?t=1486731&highlight=bootloader+6
same thing
Flash dfp 231
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash dfp 231
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
isn't it a defy+ sbf?
Yes, that's why I'm suggesting it as a last resort
Sent from my MB526 using Tapatalk 2
what are the chances it will work? i'll scared i'll totally brick it. it's 100% not a defy+
Zero percent chance of bricking
Only problem is that there may be problems in the stock rom, which can be fixed by installing cm10 or cm10.1
By problem I mean no camera or battery not charging to the full level but again these can be fixed by upgrading to cm10 or 10.1
Sent from my MB526 using Tapatalk 2
it worked! the defy finally booted!
thanks a lot man!
so does that means that my friend flashed a defy+ sbf in the first place?
kirov1045 said:
it worked! the defy finally booted!
thanks a lot man!
so does that means that my friend flashed a defy+ sbf in the first place?
Click to expand...
Click to collapse
I think he flashed a wrong sbf
obviously, but usually jordn 97.21.51 fixes any wrong sbf flashing.
If device boot loader version is 7, then only defy + sbfs work(usually because of wrong flashing of a sbf)
Had that not been the case your initial sbf would've worked.
Sent from my MB526 using Tapatalk 2
Thanks Thanks
thekguy said:
Flash dfp 231
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
thanks to you I saved my defy..2 week of search (no bootloader and black screen) by flashing dfp231
Hello! My friend ask me to help him back to life dead Moto Defy MB525 (with standard lens, not green).
Phone was bricked because of downgrading. Now, phone is completly dead (black screen, phone is recognized as "S Flash OMAP3630".
I was try to flash it with many different firmwares, but no luck. Can You hep me somehow?
And what's differeneces between JORLA, JRDNEM and JORDN ?
As a last resort you can flash Defy+ SBF.
Sent from my MB526 using xda app-developers app
I'm starting to think that I messed up bad this time, I'm having 0 sucess trying to revive my Defy, saturday I had decided I wanted to downgrade my CM10 back to CM7 so I went ahead with the whole SBF flashing business but somewhere during that something happened and now the only thing my Defy is managing to do is light the white led when I connect it on the USB to the PC, but the PC doesn't seem to be recognizing it.
I was trying to flash some SBFs, mostly Eclair and Froyo, but not one of them worked, all of them would just not boot, but up until I tried the last SBF it was at least being recognized. I assume the problem was because last time I had flashed a 4.5.1 SBF and if I'm not mistaken it isn't possible to downgrade after that.
I've already followed the unbricking thread, but I can't do much since it isn't being recognized when plugged in, and I've already left it there for more than 24 hours so I think the problem is not with the battery.
Flash dfp231. It should get you to the Motorola logo. If it hangs then wipe data from stock recovery
Sent from my MB526 using Tapatalk 2
thekguy said:
Flash dfp231. It should get you to the Motorola logo. If it hangs then wipe data from stock recovery
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
How ?
Its a sbf. Flash it normally
Sent from my MB526 using Tapatalk 2
thekguy said:
Its a sbf. Flash it normally
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Still, how ?
As I said, it isn't being detected by the PC, therefore not showing on RSD.
Use the mcgyver cable
Sent from my MB526 using Tapatalk 2
thekguy said:
Use the mcgyver cable
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Oh no, I have no knowledge of eletronics, don't wanna risk more damage by trying that.
Use an external battery charger. You may have run out of battery while trying to unbrick, and the phone at this stage cannot be charged normally
Sent from my MB526 using Tapatalk 2