Database Users

reactivation lock

I flashed XtreStoLite rom through custom recovery, everything went well. During the setup menus before entering the os it asked something about a reactivation lock. It sounded good so i turned it on. Next thing i know i cant boot into my custom recovery and i can't boot the phone. I put it in download mode flash the first thing i find with odin (it failed) but the phones boots. (I found this solution online)
There is no reactivation lock in settings but i can find it when i search settings. Needless to say when I disable the reactivation and search for it again it is still enabled.
Kies will not recognise it. There is no Samsung account of any kind in this rom. anything i've seen anyway.
When i try to factory reset through settings it says "Unfortunately, Settings has stopped".
What do i do? pls help
the phone is an SM-G900F running the latest XtreStoLite_ROM_v2.2_LP_ with a custom touch recovery which i cannot access.

As far as some users who encountered this problem said... Flashing a stock ROM with the same build number through odin was able to fix this issue.

Riyal said:
As far as some users who encountered this problem said... Flashing a stock ROM with the same build number through odin was able to fix this issue.
Click to expand...
Click to collapse
i did that everything works fine but i can't install a custom recovery or root and i cant turn off reactivation lock. its in settings now but when i deactivate it it asks me to login to my samsung account. i do that it signs in fine but it is still enabled.

Like I said Flashing a stock ROM with the same build number... What I meant was a ROM that wasn't prepackaged by any members of xda but instead was built from samsung. Perhaps try using Kies to factory reset your phone instead.
When reactivation lock is on you can't boot to recovery & can't debrand your phone. But that doesn't block your from reflashing a ROM with the same build number as your current custom ROM has.
So what you need to do is
1. Flash a full stock ROM.
2. Factory reset
3. From Setup wizard login your samsung account and other details and disable reactivation lock.
4. Install custom recovery and root your device again.

rockon92 said:
i did that everything works fine but i can't install a custom recovery or root and i cant turn off reactivation lock. its in settings now but when i deactivate it it asks me to login to my samsung account. i do that it signs in fine but it is still enabled.
Click to expand...
Click to collapse
Back to Kitkat and disable.
Then upgrade to Lollipop and install the custom files.

thank you very much everybody! its working fine now!
i just downgraded to kit kat 4.4.2 logged in to my samsung account and disabled reactivation lock with no problems. i then update with ota and everything is fine until now!
thanks again!

On.my 900f s5 uk edition on lollipop the reactivation lock was in the security menu. I had to flash twrp using flashify as it locked my phone when using odin and the twrp app. Of course now I know to deactivate the lock first lol

tony_76 said:
On.my 900f s5 uk edition on lollipop the reactivation lock was in the security menu. I had to flash twrp using flashify as it locked my phone when using odin and the twrp app. Of course now I know to deactivate the lock first lol
Click to expand...
Click to collapse
I already had twrp when i flashed the custom rom and during the setup the custom rom asked to enable reactivation lock, it sounded good at the time..little did i know! next time i reboot the phone into recovery to flash the aroma addon package for the rom i used, it locked the phone down.
I had to flash something with odin to make it boot into the os, the flash failed but it did boot! then i flashed the stock kit kat 4.4.2 from sammobile, did the setup, logged in to my samsung account and reactivation lock disabled just fine! did the OTA updates then root, installed twrp recovery and installed the xtresto rom with the aroma addon package.
Everything seems to be fine now!

I'm in the same boat. I can't even factory reset and cannot turn of activation lock KK.
phone still works. i just can't access recovery. cannot use odin to push kitkat back.
cannot use TWRP either. i'm stuck.
Damn XtreSto Lite Rom...what the heck.

found a way. Download and install Kies 3 on your comp. Follow the Firmware upgrade and initialization. it'll flash back to stock. follow the instructions.
Omg took me forever to find this solution.

melloyellowkc said:
found a way. Download and install Kies 3 on your comp. Follow the Firmware upgrade and initialization. it'll flash back to stock. follow the instructions.
Omg took me forever to find this solution.
Click to expand...
Click to collapse
it seems that for some people kies works to recover the phone (for me it didn't) and for some odin works to push kit kat and disable reactivation lock
anyway am glad you fixed it

Flash something from odin. The flash will fail but the phone boots afterwards. Don't know why this works but it did for me and rocking above. Once booted turn off the reactivation lock.

Try to flash kitkat firmware original with bootloader end pit file for ur device model you find in xda

What worked for me!!
Had the same problem. The rom locked me out. (reactivation lock was activated)
I flashed the stock LOLLIPOP firmware i got from sammobile using odin, the KITKAT firmware does not flash.
Logged into the phone with my original samsung account.
Removed that account from the device
Created a new samsung account from the computer.
Added that account to the device.
Turned of reactivation lock, and viola!! it worked

do i need to downgrade to kitkat just to make it work? remote control and reactivation lock? before im using stock rom rooted but still doesn't work. then i tried custom rom it's working but the only problem is private mode is failed to enable. then i switch to another custom rom then almost perfect but the remote control and reactivation lock is not working.

Just letting people know:
I had the same issue as OP, except that when I was locked in the first time setup thing, trying to log in with my Samsung account credentials resulted in the error message "Processing failed". I tried the reactivation lock bypassing trick that takes advantage of the samsung default browser and acessibility settings (can be foun on YouTube) but it still didn't help because when I pressed to add a Samsung account, nothing happened. It was probably due to some of Samsungs files missing on my phone due to the previous XtreStoLite installation that I was originally updating when I got into this mess.
What fixed it for me was flashing the stock 4.4.2 KitKat firmware from sammobile with Odin and THEN doing the reactivation lock bypassing trick. Just downgrading to KitKat and trying to login normally in the first time setup thingy didn't work as it resulted in the same "Processing failed" error as before on Lollipop. You guys have no idea how happy I was when I booted to download mode and saw "REACTIVATION LOCK(KK): OFF". I had already lost almost all hope! :victory:

i have a more sexy problem ! i don`t have the reactivation lock option on website not even on my phone....! how to disable it ?

melloyellowkc said:
I'm in the same boat. I can't even factory reset and cannot turn of activation lock KK.
phone still works. i just can't access recovery. cannot use odin to push kitkat back.
cannot use TWRP either. i'm stuck.
Damn XtreSto Lite Rom...what the heck.
Click to expand...
Click to collapse
same here... my g900w8 is on download mode only now!

mp_79 said:
same here... my g900w8 is on download mode only now!
Click to expand...
Click to collapse
Thanks for your idea a few days helped me deactived my samsung s5. it has the same problem when i up rom xtrestolite 2.2 and active reactivation lock without knowledge what is it.
I declare my way:
1. find stock rom with same baseband in sammobile.com, there are 2 version: 5.0 and 4.4.2, you should choose both and use 4.4.2 first, if success, next step.
2. use odin, in tab AP choose file rom above
3. pass, finish
4. find on youtube "how to remove or bypass reactivation lock", find correct version for you.
5. finish, enjoy it
sorry my bad english

i flashed with 4.4.2 many time but not remove reactivation lock still here not disable

Bricked in FRP lock. Need help to get out.

Anyone knows how to go remove FRP lock with custom kernel and recovery? I cant boot into the OS nor in the recovery due to custom binary? Any way to get it unlocked or maybe get booted in the rom??? Help will be appreciated.
CANT EVEN FREAKING CHARGE MY PHONE DUE TO FRP LOCK!!!! WTF????

Will flashing stock rom fix it?

Be careful not to run your battery down or you won't even be able to flash your device with Odin. If I had enough battery left, I'd flash it with Odin right now.

Kh thanks. Worked. Phoned bricked when I had 100% battery.

AK1149 said:
Kh thanks. Worked. Phoned bricked when I had 100% battery.
Click to expand...
Click to collapse
what exactly did youdo to fix this?

Download stock ROM and flash using ODIN.

CafeKampuchia said:
Be careful not to run your battery down or you won't even be able to flash your device with Odin. If I had enough battery left, I'd flash it with Odin right now.
Click to expand...
Click to collapse
so when I flash the stock .. the OEM Unlock option should be ON or OFF ?? please help

That doesn't matter. Just flash it. It will work with official firmwares even with OEM Locked.

frp lock is not brick, its an setting you disabled in
developer options > OEM unlock,
the way to get past it its to flash offical firmwate trough odin and phone boot again, just enable OEM unlock again to root and keep it enabled

Can someone find a stock ROM for my tmobile version, model number G928W8. I have tried everything but when i flash it through Odin it fails.

Try starting download mode and use smartswitch and use the option to reinstall it

You can check sammobile they have a library of firmwares.

FRP Removal
Removed

the Doctor said:
Be careful not to run your battery down or you won't even be able to flash your device with Odin. If I had enough battery left, I'd flash it with Odin right now.
Click to expand...
Click to collapse
hey please help me i bought a samsung note5 T-mobil about 3 weeks ago it give me this msg (custom pinary blocked by frp lock ) and turn of i try to flashed it with odin and kies 3 but didnt work still nothing what should i do :crying:

HELP! Custom binary blocked by FRP Lock
So I flashed a tar to root my samsung galaxy on5 in Odin, recovered and added SuperSu everything was working fine till i turned off developer mode since i was i THOUGHT done with the procedures. rebooted and NOTHING but a RED msg stating "custom binary blocked by FRP.
It Wont turn on, it Wont go back into recovery mode AND I cannot discover it when i plug it via usb to computer.
WTF?? How do I get it Working?

Custom binary blocked by frp lock

need urgent help really.
my phone has been rooted and has twrp installed for months now with no issues, all of a sudden my phone rebooted to the samsung logo screen with the mentioned error message. i have no idea how and why this error has occured but my phone wont boot to system. i really dont want flash stock firmware as i havent backed things up, is there a way to fix this issue with out doing a full wipe?

you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "

robhug said:
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
Click to expand...
Click to collapse
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.

sofir786 said:
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
Click to expand...
Click to collapse
yes hopefully cloud is our new god ^^ yes its annoying I agree but its also a great feeling to begin with a clean phone like new after a reset , and I have also a crappy download speed so yes its a pain to download 4gb , and even better when its corrupted and need to download agin good luck with your device

Hey guys I need help.
My phone got bricked as you said (I accidentally turned off OEM unlock on my rooted phone) so I tried to flash stock firmware, but odin fails and on my phone it says (sw rev. check fail. device:3 binary:2). Plz help!
My phone: S8+
FIRMWARE: CRF7
FRP LOCK: ON
OEM LOCK: ON

Just had the very same problem meself ?
Thank god for Odin and https://updato.com/
Bt like previous posters says its like havin a new phone apart from samsung pay not working

Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..

nattyniz said:
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
Click to expand...
Click to collapse
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.

spawnlives said:
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
Click to expand...
Click to collapse
That helped. Flashing the right version worked just fine.
Thanks!!

FRP lock
Hi people,
I got the "FRP lock" on my Samsung S8 SM-G950F(Exynos) and tried to flash Stock Oreo but when I press start Odin say PASS but recovery won't start.
please help

i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem

Mark Nyombi said:
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Click to expand...
Click to collapse
can you get a pic of the screen youre talking about?

Hello guys i rooted my S8+ G-955F and i turned off usb debugging and ome lock
And i have android 9 installed on my device, i tried all the way but for nothink , any help please

Bricked Phone - Failed to mount system error & FRP lock.

Hi all 0/
I'm creating this post because well I have a bricked phone (I know, another bricked phone thread) and am asking if anybody can help or point me in the directions of help.
P
The Problem
So my phone failed to install the latest security update that was released in September; just gave me the update failed error on reboot. I ignored this for a month as it didn't bother me but it started to get progressively more buggy, random crashes then random restarts then google play services just stopped working. This point I looked into it and the internet told me to use smartswitch to apply the update (which I assumed to be the problem at the time). Smartswitch couldn't update it which through it into emergency recovery mode. Smartswitch was then blocked by FRP lock when I tried to use emergency recovery mode.
I then tried by use Odin to flash stock firmware, which FRP lock blocked. Now i'm stuck as I can't flash anything with odin or use smartswitch so am stuck with either download mode of emergency recovery page.
I have extracted and reflashed all the sys.img flash expect system which has allowed me to boot to recovery but have the error
DM verity failed
E/ failed to mount system (invalid argument)
All the fixes for dm verity failed system, frp lock etc don't work as i think i have a combination of problems
Neither have I found a post that describes this problem anywhere
Thank you very much for reading

If you can boot the phone do you know the google email and password to remove the fpr?

godkingofcanada said:
If you can boot the phone do you know the google email and password to remove the fpr?
Click to expand...
Click to collapse
Yes I do, which is the most annoying part!

Skyscripter said:
Yes I do, which is the most annoying part!
Click to expand...
Click to collapse
Don't use Odin, use the actual Samsung app smart switch and factory restore/emergency mode restore option.

godkingofcanada said:
Don't use Odin, use the actual Samsung app smart switch and factory restore/emergency mode restore option.
Click to expand...
Click to collapse
That's what I originally tired and it gets blocked by the frp lock

Skyscripter said:
That's what I originally tired and it gets blocked by the frp lock
Click to expand...
Click to collapse
The fpr lock isn't supposed to block you from installing official factory firmware. But it has to be the exact firmware. It should install and then ask for your gmail

godkingofcanada said:
The fpr lock isn't supposed to block you from installing official factory firmware. But it has to be the exact firmware. It should install and then ask for your gmail
Click to expand...
Click to collapse
That's what I thought, but when I've tried to use smart switch it blocks me, and every version of firmware I've found with odin it blocks. How can I find out which firmware my phone was on before it bricked its self? or do you think its a case of trying many?
assuming smartswitch is unable to find the firmware that i need is there any way of telling it which version to flash?

Skyscripter said:
That's what I thought, but when I've tried to use smart switch it blocks me, and every version of firmware I've found with odin it blocks. How can I find out which firmware my phone was on before it bricked its self? or do you think its a case of trying many?
assuming smartswitch is unable to find the firmware that i need is there any way of telling it which version to flash?
Click to expand...
Click to collapse
Smartswitch can't flash it because whatever crapped out changed the device ID or some info it looks to for authentication. I had that happen once. After a fw flash my phone changed from SM-G928W8 to G928F and smart switch wouldn't touch it. So what I had to do was find the exact match, you need to know what carrier your phone came from to get the model for firmware, like t mobile or Verizon, and then get that version, I think nougat or mm would work but our device shipped with mm. Odin will work but it the fw has to match the device. Then once it boots your gmail info is needed.

godkingofcanada said:
Smartswitch can't flash it because whatever crapped out changed the device ID or some info it looks to for authentication. I had that happen once. After a fw flash my phone changed from SM-G928W8 to G928F and smart switch wouldn't touch it. So what I had to do was find the exact match, you need to know what carrier your phone came from to get the model for firmware, like t mobile or Verizon, and then get that version, I think nougat or mm would work but our device shipped with mm. Odin will work but it the fw has to match the device. Then once it boots your gmail info is needed.
Click to expand...
Click to collapse
Okay I think I understand, so i need the exact firmware it was on before it crapped out, otherwise it will think i'm trying to flash new firmware an frp lock stops it right? My phone came unlocked in the UK., will i just have to try many different versions in hope one works?
Noob question, what does fw flash stand for?
Thanks so much for answering my questions : )

Flashing ROM help on Samsung S8

Hello Everyone,
First of all I am a newbie when it comes to Android, so forgive me for asking such a noob question.
So here is the story, my girlfriend's dad passed away few months ago. He used an old Samsung S8, sadly we do not know what the login pattern is or his Google account password (We did try recovery options but to no avail)
As there was no other option, I went ahead and had the phone factory reset, and from what I learned the phone is now FRP locked.
After a reading a few more guides I downloaded a tool called Odin and some 'Stock ROM' and flashed it hoping that would resolve the issue (Oh boy, how wrong I was) and the phone is now stuck on a screen saying "Error occurred while updating the device software, use the emergency recovery function"
My girlfriend just wanted to be able to use it for some time, and now I feel really bad for screwing it up.
Just wondering what my options are and if the phone is salvageable at all?

Hey, are you sure you downloaded the right ROM for this S8? Since there are two models of this phone, each with a different chipset (Exynos / Qualcomm Snapdragon). I feel like this error could come from a bad firmware? Does Odin still see the phone when you connect it to the PC?
Edit: Apparently people solved this problem using Samsung's Smart Switch on PC.

Yes, I think I downloaded the correct one. The phone is from Telstra Australia and so downloaded the ROM from Samfrew that was listed as Telstra, I typed in the model number which is SM-G950F it is this firmware that came up.
Yes when I put the phone into Recovery mode and connect to PC, Odin detects it, but the flash gets stuck halfway. I've loaded the BL, AP, CP and CSC that came within the ZIP file from Samfrew and under options only ticked 'Auto Reboot' and 'F.Reset Time'
Also tried just with the BL and AP but same deal.

blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
Have you tried Samsung's Smart Switch app on PC? Apparently people successfuly fixed this error with it.

blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
I've never had to deal with a Samsung that has a FRP lock, that could just be the reason why the flashing fails, i wouldn't know. I hope you can get the Factory Reset to work :/

Also tried the Smart Switch app but it would recognize the phone. Thank you for looking into this.

You could send a message to this user "makeyourself" : https://forum.xda-developers.com/t/i-think-i-screwed-the-pooch-on-this-one.3939572/post-79729654 , he seems aware about the FRP locks / flashing issues.
Good luck with your S8.

@Derbi75 thanks heaps, will message makeyourself now.

Ideas? Anyone?

blackslash said:
Ideas? Anyone?
Click to expand...
Click to collapse
From what I know, the error only appears if the phone was interrupted during flashing. Such as, Odin was writing into phone but you probably removed the USB or stuff. The screen you see is actually download mode. It is just renamed. Try plugging in your device when it's on the error screen then re-flash it.