Database Users

reactivation lock

I flashed XtreStoLite rom through custom recovery, everything went well. During the setup menus before entering the os it asked something about a reactivation lock. It sounded good so i turned it on. Next thing i know i cant boot into my custom recovery and i can't boot the phone. I put it in download mode flash the first thing i find with odin (it failed) but the phones boots. (I found this solution online)
There is no reactivation lock in settings but i can find it when i search settings. Needless to say when I disable the reactivation and search for it again it is still enabled.
Kies will not recognise it. There is no Samsung account of any kind in this rom. anything i've seen anyway.
When i try to factory reset through settings it says "Unfortunately, Settings has stopped".
What do i do? pls help
the phone is an SM-G900F running the latest XtreStoLite_ROM_v2.2_LP_ with a custom touch recovery which i cannot access.

As far as some users who encountered this problem said... Flashing a stock ROM with the same build number through odin was able to fix this issue.

Riyal said:
As far as some users who encountered this problem said... Flashing a stock ROM with the same build number through odin was able to fix this issue.
Click to expand...
Click to collapse
i did that everything works fine but i can't install a custom recovery or root and i cant turn off reactivation lock. its in settings now but when i deactivate it it asks me to login to my samsung account. i do that it signs in fine but it is still enabled.

Like I said Flashing a stock ROM with the same build number... What I meant was a ROM that wasn't prepackaged by any members of xda but instead was built from samsung. Perhaps try using Kies to factory reset your phone instead.
When reactivation lock is on you can't boot to recovery & can't debrand your phone. But that doesn't block your from reflashing a ROM with the same build number as your current custom ROM has.
So what you need to do is
1. Flash a full stock ROM.
2. Factory reset
3. From Setup wizard login your samsung account and other details and disable reactivation lock.
4. Install custom recovery and root your device again.

rockon92 said:
i did that everything works fine but i can't install a custom recovery or root and i cant turn off reactivation lock. its in settings now but when i deactivate it it asks me to login to my samsung account. i do that it signs in fine but it is still enabled.
Click to expand...
Click to collapse
Back to Kitkat and disable.
Then upgrade to Lollipop and install the custom files.

thank you very much everybody! its working fine now!
i just downgraded to kit kat 4.4.2 logged in to my samsung account and disabled reactivation lock with no problems. i then update with ota and everything is fine until now!
thanks again!

On.my 900f s5 uk edition on lollipop the reactivation lock was in the security menu. I had to flash twrp using flashify as it locked my phone when using odin and the twrp app. Of course now I know to deactivate the lock first lol

tony_76 said:
On.my 900f s5 uk edition on lollipop the reactivation lock was in the security menu. I had to flash twrp using flashify as it locked my phone when using odin and the twrp app. Of course now I know to deactivate the lock first lol
Click to expand...
Click to collapse
I already had twrp when i flashed the custom rom and during the setup the custom rom asked to enable reactivation lock, it sounded good at the time..little did i know! next time i reboot the phone into recovery to flash the aroma addon package for the rom i used, it locked the phone down.
I had to flash something with odin to make it boot into the os, the flash failed but it did boot! then i flashed the stock kit kat 4.4.2 from sammobile, did the setup, logged in to my samsung account and reactivation lock disabled just fine! did the OTA updates then root, installed twrp recovery and installed the xtresto rom with the aroma addon package.
Everything seems to be fine now!

I'm in the same boat. I can't even factory reset and cannot turn of activation lock KK.
phone still works. i just can't access recovery. cannot use odin to push kitkat back.
cannot use TWRP either. i'm stuck.
Damn XtreSto Lite Rom...what the heck.

found a way. Download and install Kies 3 on your comp. Follow the Firmware upgrade and initialization. it'll flash back to stock. follow the instructions.
Omg took me forever to find this solution.

melloyellowkc said:
found a way. Download and install Kies 3 on your comp. Follow the Firmware upgrade and initialization. it'll flash back to stock. follow the instructions.
Omg took me forever to find this solution.
Click to expand...
Click to collapse
it seems that for some people kies works to recover the phone (for me it didn't) and for some odin works to push kit kat and disable reactivation lock
anyway am glad you fixed it

Flash something from odin. The flash will fail but the phone boots afterwards. Don't know why this works but it did for me and rocking above. Once booted turn off the reactivation lock.

Try to flash kitkat firmware original with bootloader end pit file for ur device model you find in xda

What worked for me!!
Had the same problem. The rom locked me out. (reactivation lock was activated)
I flashed the stock LOLLIPOP firmware i got from sammobile using odin, the KITKAT firmware does not flash.
Logged into the phone with my original samsung account.
Removed that account from the device
Created a new samsung account from the computer.
Added that account to the device.
Turned of reactivation lock, and viola!! it worked

do i need to downgrade to kitkat just to make it work? remote control and reactivation lock? before im using stock rom rooted but still doesn't work. then i tried custom rom it's working but the only problem is private mode is failed to enable. then i switch to another custom rom then almost perfect but the remote control and reactivation lock is not working.

Just letting people know:
I had the same issue as OP, except that when I was locked in the first time setup thing, trying to log in with my Samsung account credentials resulted in the error message "Processing failed". I tried the reactivation lock bypassing trick that takes advantage of the samsung default browser and acessibility settings (can be foun on YouTube) but it still didn't help because when I pressed to add a Samsung account, nothing happened. It was probably due to some of Samsungs files missing on my phone due to the previous XtreStoLite installation that I was originally updating when I got into this mess.
What fixed it for me was flashing the stock 4.4.2 KitKat firmware from sammobile with Odin and THEN doing the reactivation lock bypassing trick. Just downgrading to KitKat and trying to login normally in the first time setup thingy didn't work as it resulted in the same "Processing failed" error as before on Lollipop. You guys have no idea how happy I was when I booted to download mode and saw "REACTIVATION LOCK(KK): OFF". I had already lost almost all hope! :victory:

i have a more sexy problem ! i don`t have the reactivation lock option on website not even on my phone....! how to disable it ?

melloyellowkc said:
I'm in the same boat. I can't even factory reset and cannot turn of activation lock KK.
phone still works. i just can't access recovery. cannot use odin to push kitkat back.
cannot use TWRP either. i'm stuck.
Damn XtreSto Lite Rom...what the heck.
Click to expand...
Click to collapse
same here... my g900w8 is on download mode only now!

mp_79 said:
same here... my g900w8 is on download mode only now!
Click to expand...
Click to collapse
Thanks for your idea a few days helped me deactived my samsung s5. it has the same problem when i up rom xtrestolite 2.2 and active reactivation lock without knowledge what is it.
I declare my way:
1. find stock rom with same baseband in sammobile.com, there are 2 version: 5.0 and 4.4.2, you should choose both and use 4.4.2 first, if success, next step.
2. use odin, in tab AP choose file rom above
3. pass, finish
4. find on youtube "how to remove or bypass reactivation lock", find correct version for you.
5. finish, enjoy it
sorry my bad english

i flashed with 4.4.2 many time but not remove reactivation lock still here not disable

Custom binary blocked by frp lock

need urgent help really.
my phone has been rooted and has twrp installed for months now with no issues, all of a sudden my phone rebooted to the samsung logo screen with the mentioned error message. i have no idea how and why this error has occured but my phone wont boot to system. i really dont want flash stock firmware as i havent backed things up, is there a way to fix this issue with out doing a full wipe?

you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "

robhug said:
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
Click to expand...
Click to collapse
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.

sofir786 said:
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
Click to expand...
Click to collapse
yes hopefully cloud is our new god ^^ yes its annoying I agree but its also a great feeling to begin with a clean phone like new after a reset , and I have also a crappy download speed so yes its a pain to download 4gb , and even better when its corrupted and need to download agin good luck with your device

Hey guys I need help.
My phone got bricked as you said (I accidentally turned off OEM unlock on my rooted phone) so I tried to flash stock firmware, but odin fails and on my phone it says (sw rev. check fail. device:3 binary:2). Plz help!
My phone: S8+
FIRMWARE: CRF7
FRP LOCK: ON
OEM LOCK: ON

Just had the very same problem meself ?
Thank god for Odin and https://updato.com/
Bt like previous posters says its like havin a new phone apart from samsung pay not working

Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..

nattyniz said:
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
Click to expand...
Click to collapse
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.

spawnlives said:
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
Click to expand...
Click to collapse
That helped. Flashing the right version worked just fine.
Thanks!!

FRP lock
Hi people,
I got the "FRP lock" on my Samsung S8 SM-G950F(Exynos) and tried to flash Stock Oreo but when I press start Odin say PASS but recovery won't start.
please help

i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem

Mark Nyombi said:
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Click to expand...
Click to collapse
can you get a pic of the screen youre talking about?

Hello guys i rooted my S8+ G-955F and i turned off usb debugging and ome lock
And i have android 9 installed on my device, i tried all the way but for nothink , any help please

Sm-T580 FRP lock and custom binary blocked by frp. Cant flash twrp recovery.

So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.

Sounds like you need to find the Combination Firmware.

softasspoptart said:
So im trying to install twrp recovery but when i try to flash it thru odin, i get a Custom Binary (RECOVERY) blocked by FRP lock. I cant factory reset because it also disabled by FRP. I cant verify the tablet because i dont know the account information as the tablet was bought through craigslist. I have tried flashing a stock firmware version and that installed fine, but i still couldnt get past the verify screen. So thats when i decided to try and flash twrp but came into the binary error. I have been trying for the past two days to find a way around the verify identity and the frp lock. I cant enable oem unlock. I have tried rootjunky method but OTG flash wont pull up the file manager when plugged into the tablet. I cant use adb because i cant enable the developer settings because you guessed it i cant get past verify identity screen. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Read the post by Beut in this thread and then watch the video.

4929york said:
Read the post by Beut in this thread and then watch the video.
Click to expand...
Click to collapse
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.

softasspoptart said:
I already tried that method but didn't work. It's on android 7.0. I tried downgrading to sm-t580.. XAR firmware 6.1 and it worked but when it boots it goes straight to a black screen asking for a password. I tried the frp call method as well but it doesnt have wifi calling.
Click to expand...
Click to collapse
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.

lewmur said:
It only works with certain versions of 6. The one ending is PL4 is the one you want. The trick is in adding the fake wifi network instead of connecting to your home network. Pay close attention to the beginning of the video.
Click to expand...
Click to collapse
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard

softasspoptart said:
Okay thank you. I will try that again when I get home. And this works on version 7.0? The device is currently on 7.0 but when I tried the pl4 md5 it flashes it but when I boot up the device it just goes to a black screen and asks for a password. It doesn't start at the setup wizard
Click to expand...
Click to collapse
You have to use Odin to install PL4. You can't flash it via TWRP. Also, make sure you wipe everything first.

lewmur said:
You have to use Odin to install PL4. You can't flash it via TWRP.
Click to expand...
Click to collapse
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.

softasspoptart said:
I know. I can't install twrp like I said. I've been using Odin to flash everything. But when I flashed the pl4 file and tablet goes to reboot. It doesn't load the setup wizard. Doesn't show the welcome screen and pick a language. It goes straight to a black screen and asks for a password. Doesn't ask for an email or anything.
Click to expand...
Click to collapse
Never heard of that. Can you boot from there into recovery and wipe again?

lewmur said:
Never heard of that. Can you boot from there into recovery and wipe again?
Click to expand...
Click to collapse
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.

softasspoptart said:
Yea but when I try to factory wipe it says mdm doesn't allow factory reset and reboots and takes me back to that same black screen. I can only wipe cache partition. I will post a picture of the screen when I get home.
Click to expand...
Click to collapse
I found this site. It is apparently an "MDM lock" and not FRP.

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?

softasspoptart said:
Tried this as well. I did it about 20 times before giving up. I might try it again and do it about 30 to 50 times. If I was just able to get to settings I'd be straight but I can't get to the settings so that's why I'm trying to reset it as a completely new device. Do you know if I could flash the 7 inch tab A firmware onto the smt580? Or flash the smt585 firmware onto the t580 and flash the BL AP and CSC?
Click to expand...
Click to collapse
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.

4929york said:
From what I've read, Airwatch MDM lock can't be removed by flashing ANYTHING. It is third party anti-theft protection that has nothing to do with what ROM is installed. I know I ran into their stuff a few years ago with a used laptop I bought and only Airwatch was able to solve the problem after contacting their customer and verifying the laptop wasn't stolen.
Click to expand...
Click to collapse
Okay thanks. I'll get in contact with airwatch.

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
I did end up finding this. Seems the device is completely locked with no way to get around. When i flashed the device i may have deleted the admin privilages so there is no way of gettting around it as of now. I might end up paying someone to fix it or get around it or i wasted 180$ on a locked device. The guy i bought it from either blocked my number or deactivated his number as i cant get in contact with him. Pretty pissed. Thanks for all the help tho

I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.

BBowermaster said:
I had the black screen password happen to me when I downgraded my SM-P580 from Android 7 to 6. Try clearing the cache. If that doesn't work, try reflashing, then turn it off and reboot to recovery and clear the cache.
Click to expand...
Click to collapse
Okay I'll try that. Didn't try that yet. Will keep updated

lewmur said:
I found this site. It is apparently an "MDM lock" and not FRP.
Click to expand...
Click to collapse
Do you think if i changed the CSC to a different region on the tablet, and put a unlocked bootloader on it, would it might get rid of the frp lock? Do you happen to have a smt580? If so do you think there is anyother way of getting around this? say if i flashed like your firmware on to my tablet? Im desperate to get this thing unlocked as i would be out 180$ :crying:. Thanks for all your help so far. I really appreciate it man. Thanks to everyone who has helped so far.

Or what if i downgrade it to 6.1 and then downgrade it again to a even farther back version? Do you think this might work and gett me around the black screen? If so then i would be able to bypass the google verify account. Ima go ahead and try it unless its a risk of bricking the tablet completely.

I also read somewhere that if i flash the cp part on odin that it will erase all data. Think that might be worth a shot? But what do i need to insert in the cp slott? I know BL goes to BL and AP to AP and CSC home goes in CSC. So what goes in the cp slot?
EDIT: So instead of putting csc home in the csc slot i put the other csc file in its place. I checked the re partition box. When i did this i got a new message on the tablet in the top left of tthe download mode that says FRP is enabled, ignore PIT download. Any idea what this means?

Sm-t280 frp locked binary

So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help

Why don't you try a backup in TWRP?

Reinstalling the stock firmware with Odin won't wipe the device.

slop_me said:
So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help
Click to expand...
Click to collapse
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock.. Download Mode is accessable but won't initialize when trying to flash stock firmware. Binary 4 FRP Unlock file was accepted and flashed in by Odin3. Stock firmware installs afterwards.
Version 2. Device is stuck in bootloop. "Custom Binaries Blocked by FRP Lock" appears on Logo screen. Recovery and Download Modes are so far, useless. Binary 4 FRP Unlock used, no positive results. Binary U 4 used. Positive result. Stock firmware flashed in afterwards.
Version 3. "Custom Binaries Blocked by FRP Lock" appears on Download Mode which either stalls right after or fails to initialize. Binary 4 FRP Unlock and Binary U 4 yeild no positive results. (This ones on it's way to me).
Version 4. "Custom Binaries Blocked by FRP Lock appears on Recovery Mode. Download Mode useless. I'm currently following this one.
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock" which I couldn't yet find.

Casper Young said:
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock..
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock"
But I couldn't find one.
Here's my post, it may help.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.

ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.

Casper Young said:
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.
Click to expand...
Click to collapse
Trust me, I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device.
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset.
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware.
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.

ashyx said:
Trust me, [not happening!]I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device. [Well, umm. No, you haven't. And take a wild guess how many devices I have, like that matters.]
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset. [Everytime you turn off the device it resets.]
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware. [You obviously have difficulties comprehending that I said otherwise]
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.
Click to expand...
Click to collapse
Wow, you're on a roll ain't ya? Hey ASHYX, dont misjudge me because of my stats you see here. Over a decade ago I was stacking ROMs into my HTC-G1. 3 decades ago I was an Electrical Engineer and Sonar Operator in the Navy. Let me tell you point blank, you're mistaken! Normally you would think you can just flash in stock OTA firmware into the device via Odin3 and you get to return to normal. Well that wasn't the solve for this. This was a new one to me also. If you think you're so right on what you say I'll be more than happy to point you in the direction of some XDA visitors, two of which are still Binary FRP locked. You can try telling them what you just told me and they'll probably call you a blooming idiot. No offense but you could try reading it properly which might help.
I said, [QOUTE] " While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. [END QOUTE]
Take my word for it, the method you stated was already tried AND DID NOT WORK!
If you want to insist you're all that, here ya go, these people need your expertise in development
https://forum.xda-developers.com/ga...frp-locked-t3772512/post80420061#post80420061

Data loss when flashing stock firmware.
ashyx said:
Reinstalling the stock firmware with Odin won't wipe the device.
Click to expand...
Click to collapse
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.

Casper Young said:
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.
Click to expand...
Click to collapse
ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3

slop_me said:
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3
Click to expand...
Click to collapse
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.

ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Yeah it was just stock lollipop with a root. Will that cause an issue or am I good to continue?

ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Props to you thanks for the knowledge it worked flawlessly I mean kinda half way through it did say erasing and I kinda **** the bed and got scared because I really needed the data off of there but my man you are right just flashing stock ROM worked flawlessly everywhere online says it will wipe the device but it didn't. Thank you so much for your fantastic help <3

HELP!! S7 edge not booting… ND FRP lock: on (SOLVED)

Yea so flashed Stock Firmware, everything booted then had to do a restart… got Custom binary Lock!!! So went to Odin nd reinstalled stock firmware !!
But yea FRP IS ON…
PRESENT SITUATION:
-Doesn’t boot cause of dm- verity check…
-Can’t install TWRP cause of FRP Lock
- Binary is 8
Can Anyone give possible solutions…
Tried different solutions from different forums but still ntg
Max got it to glowing Samsung logo (stuck for an hour)
Same as this thread-
Thread 'RIP S7 EDGE G935FD Can any one help me?'
https://forum.xda-developers.com/t/rip-s7-edge-g935fd-can-any-one-help-me.4082203/

try factory resetting the phone thru recovery, then reboot

notnoelchannel said:
try factory resetting the phone thru recovery, then reboot
Click to expand...
Click to collapse
I’m not able to access Recovery
This is the output(the same as the thread I referred earlier)

Try flashing https://drive.google.com/file/d/1Hxrf9_XwaH7QjFFwpL3wKWr08lHCOQIi/view
!!! Iam not responsible if anything wrong happens with your phone.

engage4 said:
Try flashing https://drive.google.com/file/d/1Hxrf9_XwaH7QjFFwpL3wKWr08lHCOQIi/view
!!! Iam not responsible if anything wrong happens with your phone.
Click to expand...
Click to collapse
Shut the Front Door!!
It actually Worked!!!
Didn’t work the first time
But second flash it booted up!!!
AS SOON AS U GET IN TURN OFF OEM LOCK!!
PEACE THEN