Related
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
willjohnson said:
I bought a DX earlier this week. It was updated to system 2.3.340 before i left the store. I also have a D2 and experience flashing ROMs and SBFing. What is puzzling me here is that no matter what ROM I install i get random reboots. This happens no matter what apps, activities, etc... i am doing, even when just idle, i will look down and phone is rebooting. I haven't tried SBFing the DX yet because i can't find a clear answer on how i need to do it. I know that a full .340 SBF does not exist yet. I have a full .32 SBF file and a system only .340 file. I am assuming that i would flash the .32 full, then the .340, or could i just flash the .32 and then let the phone update the factory way to .340? I am getting this reboot problem with Rubix 1.9.5, Fission 2.4.3, and GummyJar 2.5. Any advice, input, or help would be greatly appreciated. THanks in asvance.
Click to expand...
Click to collapse
try here http://rootzwiki.com/index.php/Smartphones/Motorola/Droid-X/Droid-X.html#comment220 scroll down towards the end (idk if you use windows or linux but the linux method of sbf'ing is alot easier ive used both) except in their directions it says an older sbf file just insert the one you have, then go here http://www.mydroidworld.com/forums/...ystem-baseband-2-3-340-kernel-bootloader.html to download these zip files for kernel updater, 340 system update your baseband and bootloader should already be the correct ones, (i recently bought my X too) then once you finally root your newly sbf'd X and installed droid x bootstrap etc and get into clockwork mod recovery you can flash those 2 zips (recommend flashing only one at a time, reboot, and do the next) and then you should be updated to full .340
gl
http://forum.xda-developers.com/showthread.php?t=869007
heres a thread with discussion about those update zips
Thanks for the quick replies. Gonna try your suggestion tonight or tomorrow. Now i get random lock ups followed by a boot after about five minutes. The only upside right now is that its 4 days old so if i can get some resemblance of factory back on it then i can just exchange it Thanks again will report back with results.
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
willjohnson said:
And also by "insert the file you have", i assume you mean the file i have that is VRZ_MB810_2.3.32_01.sbf is the file i need to use in RSD Lite, then update the other files with clockwork recovery?
Thanks again.
Click to expand...
Click to collapse
correct tho the one i used had was labeled VRZ_MB810_2.3.32_1FF_01.sbf
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Ok, so now i am starting to worry. Tried 3 different .320 full sbf's. All the same result. Failed process close to the begging. Then on the phone it says
Critical Error
FEBE
0047
Please Helppppp. I don't need a really expensive paperweight, all i need to do is get it so that GummyJar doesn't show on boot and i can take it back, its brand new.
Try removing the battery. Then boot into recovery (volume down + power) then do a factory reset/restore.
Sent from my ADR6300 using XDA App
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
willjohnson said:
Tried that, i finally got it to flash, i had the phone in the desk dock, didn't think about it. Once i plugged it into the usb cable direct everything went fine(so far). Also i noticed that with this phone and my wifes D2, i have to put a (1) at the end of the sbf file name to get RSD Lite to use it, otherwise the start button stays greyed out. THanks for the replies and help, will post again if there are any more problems.
Click to expand...
Click to collapse
ive heard there are several problems with rsd lol thats why ive stuck with my ubuntu/Linux its 10x easier
willjohnson said:
I guess the one i got is ok? it came from the TBH app from the market? I would like to get ahold of the one you got too if thats possible, since you know that file works.
LOL i am a dumbass, left the FF part out for somereason, thats the exact file name i have. Thanks again.\
Edit- Just tried this, i don't know whats wrong but it has the start button in RSD Lite greyed out when i select the file, its the exact one listed above. Gonna try same file from different locations
Click to expand...
Click to collapse
i also believe you DO have to have it all in specific locations but idk i use linux to do it, if you continue to play with the X after u get new one i would read up on how to dual boot ubuntu its a whole lot easier once you find ur way around i have it booting off of a 1TB external hard drive no need to install the correct moto drives etc..just plain easy lol
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
willjohnson said:
Finally total success!!!! Flashed .320 Full SBF, then used the Kernel and System updates you referenced and bam, back to stock. Now i feel better about ROM flashing, cause i can recover from most anything with this process. THanks again for your help and info.
Click to expand...
Click to collapse
it only takes once correctly doing it to feel comfortable lol also make sure using droid x bootstrap recovery make sure to tap the first choice and let it do its thing, otherwise it will constantly reboot to recovery EVERY time you turn it back on
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
willjohnson said:
Well... the SBF and updating where successful. But even after the SBF, SD Card Formating(Long format in windows, then 3 times on phone to be sure), clean install and download of all Fission stuff i normally use, still get random reboots. Gonna SBF again and try Rubix and see how that goes. If it still has problems too, i may SBF again and go to the store and return phone for a new one.
Click to expand...
Click to collapse
try something blurless like darkslide, which im currently running, no random reboots
Funnyface19 said:
try something blurless like darkslide, which im currently running, no random reboots
Click to expand...
Click to collapse
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
willjohnson said:
LOL funny you should mention, thats what i actually decided to go with instead. It really looks great, seems to be seemless too. Since you use it maybe you could tell me... Can you overclock? I downloaded the blurless version from their link and it has the blur alarm clock and a few others? is this right or is something wrong with the link? Thanks again.
Click to expand...
Click to collapse
Well I haven't overclocked yet anyway the phone gets hot enuf lol plus coming from an Eris 1k is fast lol
Um yeah it should be wright depends on what the blur clock looks like lol
Sent from my DROIDX using XDA App
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
willjohnson said:
I looked back at there post in another forum and it actually says that they added a few Blur parts in the blurless rom. I guess some blur things just work better.
Click to expand...
Click to collapse
yeah but the obsidian rom is completely blurless just not everything working
Running DarkSlide4.1 can't tell u last I had a reboot
Sent from my DROIDX using XDA App
Hi guys
Before I explain I'd like to say that yes, I have read other threads on similar topics, although none seem to have the same symptoms as me...
This week I bought a software-bricked Defy on eBay with the hopes of fixing it and giving it to a friend. I first tried flashing an old Eclair SBF to no avail (only switched on to bootloader) and thought that it could be failing due to it being on a newer firmware. So then I tried Froyo, and when that didn't work either (bootloops like when I received the phone) I thought my last resort was a CG 5 SBF, so I went for the JORDN_U3_97.21.51 build. This seems to get further into the booting process, with the MotoBLUR animation appearing but I get a BP Panic - 0x00080010 above the animation before the phone switches off. Thinking I had nothing to lose I tried a Gingerbread ROM, but that just bootlooped too so I went back to 97.21.51. I realise I've probably painted myself into a corner by flashing these
I'm all out of ideas with how to get the phone any further and have searched for the BP panic to no avail. I can get into stock recovery and bootloader, although the recovery seems to have issues with accessing the cache sometimes.
Thanks for reading
The same panic have y for the last 2 weeks, after flashing hangs in bootloader (red logo and no animation), after other flash hangs on a animated red logo and thats where you must give it time 3 or 4 min. wating, when its dont works you can try to pul out battery and do it in again while you hold the start and vol. down button, then in recovery menu wipe Dalvik cache and wipe cahe. Maby it works then, when not you can try like me to go again tho recovery and there restore stockrom, thats the way ym getting my defy work again. There are many ways to get it back to work again and it cost me 2 weeks after flashing maby 15 diverend roms to get it works and even than when it works, 2 days work whit rooting it and get 3G alive. So when you think its dead, maby RSDlite can bring it back to live, just like here.
Now my Defy MB525 working like a Defy 526 on Gingerbread.
So don't give up, when you can see whit RSDlite the phoon, it must be possible to get it work, only problem here was on a moment when the battery was empty, but here on XDA you can find the megayver method (charging on a ohter cell like a duo) or what y have don, get my old nokia loader (5V) and whit 2 wires hangs on the battery power it up to 4.1 V, succes.
Thanks, although I was just getting repeated boot loops rather than it hanging on the logo... And that wasn't animated either. How did you manage to restore the stock ROM through the recovery? Did you have a flashable zip? Please bear in mind that I did not get a custom recovery installed
I'll look out for the low battery problem. Thanks for your advice
ben_duder said:
Thanks, although I was just getting repeated boot loops rather than it hanging on the logo... And that wasn't animated either. How did you manage to restore the stock ROM through the recovery? Did you have a flashable zip? Please bear in mind that I did not get a custom recovery installed
I'll look out for the low battery problem. Thanks for your advice
Click to expand...
Click to collapse
U should have wiped cache and data after flashing Froyo!!!!!!
It would have booted!!!!
Now u flashed GB!! Ur stuck there!!!
Flash gb again and Go to stock recovery and wipe data!!!! If know how to do it!!!
Sent from my MB526 using xda premium
nogoodusername said:
U should have wiped cache and data after flashing Froyo!!!!!!
It would have booted!!!!
Now u flashed GB!! Ur stuck there!!!
Flash gb again and Go to stock recovery and wipe data!!!! If know how to do it!!!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thanks, although I'm pretty sure I did wipe cache and data... and I definitely did (several times ) after flashing Gingerbread. I feel like whatever is preventing Froyo and Gingerbread from booting is the same thing as what is giving me the BP panic on the CG 5 Eclair ROM.
I would suspect a hardware issue here.w
Sent from my MB525 using Tapatalk
I think it might be too It's a shame because I can enter recovery and bootloader okay, and the seller said it broke during a failed software update so I thought it would be a simple matter of reflashing an SBF.
what is bp panic?
what happens when it is booting?
Sent from my MB525 using xda premium
When I try to boot the CG 5 Eclair I get past the static Motorola logo (hence further than any other build) but the MotoBLUR animation is stuttery, with a BP panic at the top (see picture). This goes on for quite a while, then the phone switches off and this loops.
Ok if occurred during a software update, find out which he was installing and try that one. May also be worth trying motoupdate.
Sent from my MB525 using Tapatalk
I might try that, but won't it be useless now that I've flashed CG 5? I'll look into MotoUpdate
Is the general consensus that this is an unfixable hardware issue, then?
Apolgoies if you've already tried this, but I had a Defy which would do the same, either stuck on M logo or error in bootloader.
Each time I just plugged it into PC / USB at bootloader screen, and used RSD Lite to try another ROM. Eventually I found one which worked. I think I tried 5 before finding one which didn't cause any problems.
My defy was a ME525+ and the ROM which finally worked was "DEFYPLUS_U3_4.5.1-134_DFP-132_BLUR"
So, if you haven't already, I'd just suggest try a few more ROMS, flashed from Bootloader / RSD Lite.
Hope it helps somehow
Hello there, i recently got a Motorola defy and the first thing i did was install cm7. A few day later i noticed an issue with the charging port (the phone froze up and became unusable when i was using a wall charger) so i decided to return it to stock for warranty issues since i flashed to miui and the problem persisted. My phone company is Claro Dominican Republic so after doing some research i tried to put the Claro Argentina SBF using RDS lite, in paper that should have left the phone stock.
After installing that SBF the defy got stock in a boot loob, i got the motorola logo then some data usage warnings in spanish (just like the first time u boot the phone) but i kept restarting. I tried reflashing that same SBF but the problem persisted. I tried other things like installing a nordic sbf and whatnot and every time the same thing happened. Later i stubled upon a chinese sbf that did boot. I rooted the phone installed 2ndinit poped into recovery used the full wipe zip and tried to install cm7, there it got stuck at the google logo and i couldn't enter recovery.
I reflashed with the Chinese sbf re rooted and re did everything and i tried installing miui and i got the same issue. I also tried using an nandroid backup from Claro Argentina but nothing happened the phone stayed the same with the Chinese SBF.
Im fresh out of ideas and ive tried alot of things ive read arround but nothing has worked. Id love to hear your opinions on this issue, thanks in advanced
First what chinese sbf you flashed?? And second, before flashing stock again wipe data and cache on stock recovery.
Motorola Defy CM7 RC 1.5 OC 1GHz
JORDN_U3_97.21.51, thats the rom name its the only one thats working for me atm. Ive tried many things but i cant get any other rom to work.
Bad news, you cant downgrade that, now you are stuck on eclair or gb 2.3.4, cause jrdn_u3_97.21.51 has cg version 5, and froyo version 4, try this, flashing eclair again and then fixed froyo, whatever, i think motorola can see wich cg you are, wonder they not!!
forum.xda-developers.com/showpost.php?p=14762402&postcount=143
Good luck!
Motorola Defy CM7 RC 1.5 OC 1GHz
LeonardoJegigzem said:
forum.xda-developers.com/showpost.php?p=14762402&postcount=143
Click to expand...
Click to collapse
That link worked perfectly!, i had a problem with my phone internal memory (only had 128mb available) But i reinstalled the nandroid backup in the link did a factory reset there then i installed cm7 without any issues.
Now i still have the charging problem (my phone becomes unusable when its charging, gets super laggy). I want to return the phone to stock settings so that i can claim my warranty on it. Any ideas on how to put the sbf without getting the problem i had or should i just live with the issue?
You can only flash that fixed froyo of the link, because each sbf has a version, the chinese you flashed is version 5, and once you flash a new version you cannot then flash a lower one, here the problem, froyo is version 4, a fixed is a sbf without, cg31 and cg39 files
Motorola Defy CM7 RC 1.5 OC 1GHz
Cant i modify the sbf i want to install like the guy in the link did? and what about my charging problem, ever heard of it?
Yep, you can, but i never did it, i know you must use the SBF Depacker or something like that, and for the laggy try wiping cache and dalvik cache and see what happens!, did you wipe data when flashed CM9 over CM7??
yeah, and im using cm7. i wiped dalvik already and nothing.. it only happens when im charging the phone via the wall charger adapter
Hello guys! first of all sorry for my English!...well i messed up my u8800-51 and i cant get it to work, i´ve read most of related posts, but nothing work, so i'll try to explay what happened, i hope u understand my issue and help me...
Ok i had a 2.3.5 GB non-official installed, from androidmovida.. my phone was working just fine, but due to all the apps and media it was kind of slowing down, so i restored it to factory settings... when i did this, my phone started up normal, and it was almost perfect again, but i realized that even without any app installed i had 800mb of the ROM occupied, leaving me less than 200mb, this was just wrong, the ammount of memory used just after a factory reset should be around 350mb... so i installed cwm 5.0.2.7 and booted it to recovery mode, here i pressed;
wipe data/factory reset
wipe dalvik cache
and what i think that screwed my phone..i went to mount and storage and pressed format /system...
Since then my phone didnt start, but i was able to get into the recovery mode... so i downoaded the stock 2.2 froyo from huawei
(this page is in spanish cuz the phone is sold in Venezuela).
i formated my SD card, and put the dload folder in its root and the update process started, but failed...
now i cant even get to the recovery mode, ive tride the process to install the fw a million times and it keeps failling..
and i just can get to the updating process or to the pink screen..if i connect my phone and leave it connected it shows up the logo and turn off, and repeat over and over..
my guess is that somehow i cant install the rom because the memory is almost full, but i have no idea of how to clear it!
if any of u guys can help me i would appriciate it a lot!!!
again sorry for my English and for the long post, but i wanted to be specific so you dont waste time telling me to do things ive already done! thank you!!!!
maxsdaspot said:
Hello guys! first of all sorry for my English!...well i messed up my u8800-51 and i cant get it to work, i´ve read most of related posts, but nothing work, so i'll try to explay what happened, i hope u understand my issue and help me...
Ok i had a 2.3.5 GB non-official installed, from androidmovida.. my phone was working just fine, but due to all the apps and media it was kind of slowing down, so i restored it to factory settings... when i did this, my phone started up normal, and it was almost perfect again, but i realized that even without any app installed i had 800mb of the ROM occupied, leaving me less than 200mb, this was just wrong, the ammount of memory used just after a factory reset should be around 350mb... so i installed cwm 5.0.2.7 and booted it to recovery mode, here i pressed;
wipe data/factory reset
wipe dalvik cache
and what i think that screwed my phone..i went to mount and storage and pressed format /system...
Since then my phone didnt start, but i was able to get into the recovery mode... so i downoaded the stock 2.2 froyo from huawei
(this page is in spanish cuz the phone is sold in Venezuela).
i formated my SD card, and put the dload folder in its root and the update process started, but failed...
now i cant even get to the recovery mode, ive tride the process to install the fw a million times and it keeps failling..
and i just can get to the updating process or to the pink screen..if i connect my phone and leave it connected it shows up the logo and turn off, and repeat over and over..
my guess is that somehow i cant install the rom because the memory is almost full, but i have no idea of how to clear it!
if any of u guys can help me i would appriciate it a lot!!!
again sorry for my English and for the long post, but i wanted to be specific so you dont waste time telling me to do things ive already done! thank you!!!!
Click to expand...
Click to collapse
You need a micro sd reader and hook it up to a computer than copy the stock gb over and delete the old froyo. You should've asked.
I've read this may work, but android movida was closed down.
Try this.
Sent from my u8800-51 on stallion.
Somcom3X said:
You need a micro sd reader and hook it up to a computer than copy the stock gb over and delete the old froyo. You should've asked.
I've read this may work, but android movida was closed down.
Try this.
Sent from my u8800-51 on stallion.
Click to expand...
Click to collapse
sorry its embarrasing i have to ask, but i'm new with android so im a little lost! but according to what i got to learn last night trying to make my phone come back to life, there's no GB stock for the u8800-51, actually the only stock fw in huawei was the one i downloaded, and the one i installed from androidmovida required froyo to be succesfully updated..anyways ill download GB to see what happens, but if you could be a little more specific it would be nice, buecause as i said, i just learned a few things last night!!
Thank you very much for your help!
http://forum.xda-developers.com/showthread.php?t=1698308
Sent from my u8800-51 on stallion.
Somcom3X said:
http://forum.xda-developers.com/showthread.php?t=1698308
Sent from my u8800-51 on stallion.
Click to expand...
Click to collapse
once again update failed, i intended wuith 3 different sd cards but nothing...
http://forum.xda-developers.com/showthread.php?t=1889305
what if i do what it says in Reverting to Stock Froyo? id rather ask first...thou i cant mess my phone any more xD
trank you again!!
maxsdaspot said:
once again update failed, i intended wuith 3 different sd cards but nothing...
http://forum.xda-developers.com/showthread.php?t=1889305
what if i do what it says in Reverting to Stock Froyo? id rather ask first...thou i cant mess my phone any more xD
trank you again!!
Click to expand...
Click to collapse
Can you access pink screen?
Sent from my u8800-51 on stallion.
Somcom3X said:
Can you access pink screen?
Sent from my u8800-51 on stallion.
Click to expand...
Click to collapse
yes i can acces pink screen!
http://forum.xda-developers.com/showthread.php?p=27121257
Ask zcux in priv message.
Sent from my u8800-51 on stallion.
Somcom3X said:
http://forum.xda-developers.com/showthread.php?p=27121257
Ask zcux in priv message.
Sent from my u8800-51 on stallion.
Click to expand...
Click to collapse
jeje i spent the whole day yesterday trying to fix it, and now its working perfectly, i had a lot of problems, so i made an image of every state and a lil tutorial for myself of every step just in case...i dont know if it would be usefull if i publish all of it in here, since i just did what was said in many threads jeje, so what you think?
and bu the way thanks for all the help!!
maxsdaspot said:
jeje i spent the whole day yesterday trying to fix it, and now its working perfectly, i had a lot of problems, so i made an image of every state and a lil tutorial for myself of every step just in case...i dont know if it would be usefull if i publish all of it in here, since i just did what was said in many threads jeje, so what you think?
and bu the way thanks for all the help!!
Click to expand...
Click to collapse
Publish it. It wont hurt anyone.
Sent from my u8800-51 on stallion.
Hi all
So, I have a problem with my Defy (MB525 green lens). The best will be, if I'll write my full story. Here is it:
Story
I had Defy with CM 10. It had bloated battery. I wasn't using it for 6 months because I have another phone.
Some time ago, I decided, that I'll give Defy to my grandfather. On Tuesday this week I bought new original battery. I put it in the Defy, and charge it. I could boot up my old system as I wrote, CM 10. While it was charging, I detected that I haven't got SD Card. On the other hand, I found some 4GB Samsung SD, which had my father in his Desire. The SD Card had 3 partitions, which I tried to delete, and make only one, with GParted. After I did it, Linux and Windows can't see it. (This is almost other problem, which I'm trying to solve here http://crunchbang.org/forums/viewtopic.php?pid=350683)
But, when I put the CD Card to Defy, in TWRP recovery I could see some strange symbols. I thought, that I can repair something when I wipe SD Card. When the battery charged, I decided to do factory reset and wipe SD card. Here is my first failure. In TWRP I went to custom wipe, and here I marked everything including system and I wiped it. Then I remembered that system is recovery too. TWRP wrote, that everything except SD-Ext and SD was wiped. I known that this will be a problem. Yes, after reboot only Motorola logo without recovery.
I think, there was only one option - flash SBF, which I did. I went to stock bootloader and with sbf flash in Linux, I flashed this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
And than this:
CM7RC1.5_16_09_11_custom.sbf
After reboot, I got bootloop. I tried to replace battery, do factory reset but nothing helped. That time I haven't got working card, so I couldn't flash some zip via CWM recovery. Thus, I again flash another SBF, but I don't really remember which. Probably some official CEE Froyo however, I'm not sure.
After that and reboot, I got only black screen with white led lighting while USB was connected. When I wanted to go to stock bootloader, still black screen, but I can flash SBF, and while flashing, screen have brightness and text about flashing.
I knew that this is little hard brick. I again tried to flash other SBF which I have or I downloaded (yes, again I don't know which). One of SBFs which I flashed was some fixed Chinese SBF . That made my defy booting, screen working, but still bootlooping. I couldn't reach any recovery.
Again, I flashed other SBFs, CM's too but nothing worked and I got black screen again.
And this was end of my story.
Current situation
I have Defy (MB525 green lens), with unknown framework an it had only black screen and what only I can do, is break Defy with hammer or flash some SBF.
So, here is list of all SBF files, that I have downloaded and probably tried to flash: (No order)
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
CM7RC1.5_16_09_11_custom.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANO2DE_P048_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf
DFPRC_U_4.5.3-109_DPP-6-7_SIGNED_USADEFYPRCB1B50AA00A.0R_JRDNGIBRRTGC_P025_A019_HWp3a_Service1FF.sbf
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
JORDN_U3_97.21.51.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF.sbf
4.5.1-134-DFP-132-gingerbread-BL6-fixed.sbf
4.5.2-109-DHT-22-gingerbread-BL5-fixed.sbf
3.4.2-177-003-nordic-froyo-fixed.sbf
3.4.2-179-002-tmobile-froyo-fixed.sbf
4.5.1-134-DFP-74-gingerbread-BL5-fixed.sbf
4.5.3-109-DPP-11-gingerbread-BL5-fixed.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN.sbf
Probably that is all what I have.
I've read many topics with similar problem and guides, but nothing helped me, or SBFs were unavailable.
So, what have I to flash, or which guide to try, if I want working Defy?
Sorry for my not good English
Thanks
UPDATE
sterver1 said:
Wohooo!!
Story
After a long time (4 months)...
Accidentally today I found my favorite custom ROM - MoKee OS, for Defy. I said to myself: "Hm, I have some time... I'll try to flash this MoKee on my Defy and maybe it solve my problem with (not) charging/unknown battery for system."
I picked out box with Defy from drawer, wiped the dust, took the Defy and said: "Sh*t! I haven't got SD Card!" Fortunately I found one. I download MoKee OS zip on that SD Card, put it to Defy, booted to recovery and flash MoKee OS zip. (...with full wipe of course...) Then rebooted to system.
Uselessly. Still unknown battery. "Hmm, It doesn't matter. Maybe here are some new stuffs which can solve my problem." And I continued to finding something, that can solve my problem. After a while I found ROMs with new 3.0 Kernel by Quarx. HERE. I downloaded CM 11 EXPERIMENTAL with this kernel and update recovery and flashed them. I didn't read thread. After reboot system didn't boot up and TWRP was inaccessible. I found why when I read some posts from that thread. HERE. But I couldn't flash that zip via recovery because I couldn't open recovery. So I mount /system to USB from bootloader and added files from zip manually to /system partition. After reboot it jammed on booting up. But TWRP was accessible so I did full wipe and flashed CM 11 EXPERIMENTAL and than that fix zip by @lorcotti. After that it finally booted up and battery was working and charging!
And they all lived happily ever after. :laugh:
SO, If you have some problem as me (unknown battery after flashing GB SBF on MB525), try this:
1. Download recovery and some ROM from [Kernel][GPL] Development 3.0 Kernel and fix from this post.
2. Put all zips on your SD Card.
3. Boot up to recovery.
4. Flash update-recovery.zip.
5. Reboot to recovery.
6. Do full wipe.
7. Flash ROM with 3.0 Kernel.
8. Flash Fix.
9. Wipe cache and dalvik cache.
10. Reboot to system.
If you want, you can flash GAPPS via recovery too.
But this will not be for daily usage! 3.0 Kernel by Quarx have a lot of bugs!
Thanks all!
Click to expand...
Click to collapse
Yeah!
Today I again tried to flash chines SBF. This one: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
...and now I have bootable phone . I read many topics again and I got to know how to aces stock recovery. So I made wipe on this chines ROM and I can boot without loop, but I can only do emergency call with SIM it is the same. So, now, I don't know, what have I to do/flash, how to root it and flash here custom rom. Can I use SuperOneClick if it probably haven't got turned on USD Debugging?
Back on black
So, I made sbf file with depacker...
CMG39 from JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF
and all others from JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF except CMG31.
Than the bootscreen changed from chines logo to grey motorola logo and I got Bootloader (9.00) Error A5,70,39,00,27. After that I flashed another sbf and I got Error A5,70,00,00,23. Than I flashed DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf and now I again have only black screen. F*ck!
I tried to flash my made sbf and chines one (JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF) too but nothing...
Really here is nobody who can help please??? I want give Defy as Christmas gift. :crying:
OK, so repetition.
What mistakes I've made
1. I wipe wipe all including system partition in TWRP without any flashable zip on SD card.
2. I continued with flashing original SBF, while I have usable CWM.
3. I flashed many no downgradable GB SBFs.
4. I flashed Defy Plus SBF on Defy.
I hope that there is still hope.
Somehow to downgrade, flash only CWM where I can flash nandroid backup or I don't know what else...
a gingerbread sbf should also work on green lens defy as there is no diff. in hw... instead the cam
have you tried a factory reset in stock recovery after sbf flash ?
Sent from my MB526 using xda app-developers app
Now, after all (which I tried) SBFs I get only black screen. I tried many GB SBFs too, but still black screen...
I'm going to try some another Poland SBFs and than if that won't work, I'll try to flash all in Froyo CEE SBF particularly.
Thanks for your response.
Once you've flashed GB stock sbf you can't go back staight to froyo or else
Read the beginners guide and the SBF matrix sektion carefully.. if you haven't...
Sent from my MB526 using xda app-developers app
DFP 231 has been flashed by you, so no froyo sbf will work. Black screen on dfp 231 indicates some eMMC problem, because bl version is highest(no error possible). IMHO only service centre can disable bl check or replace the main board to fix the problem
The problem should have been solved at the boot loop issue by wiping from stock recovery, no network solved by baseband/radio fixes. Check the rsdlite log file to confirm checksum/access errors. I think that the custom sbf somehow messed up either eMMC or efuse(less likely, unheard of).
For sdcard error wipe everything using hdd llf. If any error persists it's a hardware issue
Sent from my MB526 using Tapatalk 4
@bone101
I know, I read it few times, and I know how it is (not) working. But, after all GB SBFs I got only black screen, so maybe were not correctly flashed... I'm using Linux and here is sbf_flash for flashing SBFs, and in it I can't view informations about phone as in RSD Lite... But maybe, it will work in wine..
Do you now, that if I flashed GB SBF, I have to flash another GB to solve my problem, because no Froyo will work?
@thekguy
I know how I can solve others problems. Only what I need help to solve is black screen.
Can't I flash something which support that high BL or it won't work?
check if you get into Bl. modus
press vol. up & then power button
tell what you see
Sent from my MB526 using xda app-developers app
That's what I'm saying, the black screen problem occurs due to bl version mostly, and you have highest bl, so in theory black screen is impossible. Unfortunately I have never seen in this forum any defy recovering from black screen after flashing dfp231. Check rsd log from windows if possible. Froyo sbf cannot work under any circumstance. You must flash only gb sbf
Sent from my MB526 using Tapatalk 4
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 173002052f066b010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: d0d8842b4879dd27b9eb94f970fbeec252fcb2f4
BP Public ID: 0000000000000000000000000000000000000000
Click to expand...
Click to collapse
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
sterver1 said:
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
Click to expand...
Click to collapse
I'm stuck in same problem, downloading this sbf you mention before, hope it works. Fu^kin defy, it sucks
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=1216982
DOWNGRADE
If you come from Android 2.1 and never flashed Android 2.2 you can use the fixed sbf-files method. With this method you will have a option to downgrade to you personal stock Android 2.1 via direct sbf flash.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
It will only work if you never flashed a Android 2.3.6 full sbf.
Click to expand...
Click to collapse
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
have you tried cm11 ?
or ms2ginger by walter79
Sent from my MB526 using xda app-developers app
sterver1 said:
@Alejandrissimo
Good luck...
Click to expand...
Click to collapse
Working and rooted, thanks for your help
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
please see your PN
sterver1 said:
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
from http://forum.xda-developers.com/showthread.php?t=1216982
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
Click to expand...
Click to collapse
Congrats man! Seems that rsdlite on Windows is the most reliable solution. Now to fix everything just flash cm10 (jelly bean) or later rom. It includes fixes for camera and battery
Again, no downgrading bl(not even jtag will work)
Sent from my MB526 using Tapatalk 4
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
Hehe, I'm glad...
sterver1 said:
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Hehe, I'm glad...
Click to expand...
Click to collapse
There's a cm7 2ndboot build which should work for you. Try cm10.1 or above, problem should be solved.
JB wiui includes those fixes, as does cm7 2ndboot. I don't think that wiui GB has them. I would personally go for cm10.1 or above
Sent from my MB526 using Tapatalk 4