Related
Long of it: G1 wouldn't recognize -any- SIM card, tmobile or other. Tonight, popped a tmobile sim in, and it recognized it. Flashed an older JF rom and the phone worked fine on WIFI/Tmo. THis phone was unlocked 2 months or so ago.
Now, it says "Your SIM does not allow blah blah blah" when i try to use my att sim in the phone. I'm very certain about the unlock being proper.
I don't belive the SIM card was ever locked in any way, so the error seems odd, and the SIM card in question (ATT) works fine on my other two g1's.
Any ideas ?
ohgood said:
THis phone was unlocked 2 months or so ago.
Click to expand...
Click to collapse
so are u saying that you've inserted a different SIM card and the phone registered fine with a different carrier at that time ?
ohgood said:
I don't belive the SIM card was ever locked in any way, so the error seems odd, and the SIM card in question (ATT) works fine on my other two g1's.
Any ideas ?
Click to expand...
Click to collapse
the sim itself isnt the lock issue - its the phones IMEI thats locked (or not)
try a replacement SIM from ATT???
Hello all, I bought a used HD2 off CL (USA), hoping to unlock it (if locked) and use it with my ATT prepaid sim.
Outwardly, the phone looks fine and everything about it works quite nicely, EXCEPT that when I insert my SIM card and start the phone, it shows me an exclamation mark on the antenna icon. When I disable all wireless connections and then re-enable it, the icon now changes to the SIM card icon with an 'x' next to it, and I am shown a screen with a keypad and the following message: 'The SIM card is missing. You can still make emergency calls if your service provider supports it.'
Thinking it was a ROM issue, I successfully loaded the latest ROM from [showthread.php?t=789506] but it did not resolve the issue. There is no issue with the SIM because it works nicely with my AT&T Samsung a607. There are no signal strength issues either.
Please help!
Can someone please provide some insight on my situation? I hope I haven't posted in the wrong forum; if so, mods may move it to the appropriate place.
Any advice on diagnosing the issue will be appreciated; I don't even know why the phone is acting the way it is. Many thanks!
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Thanks much for the reply. Other phones usually prompt for a SIM unlock code by themselves... why doesn't this one?
Running simlock.exe from Windows does give me the message "Network is locked, please input unlock code". Before I buy the code, I want to make sure that there's nothing physically wrong with the phone. It should give me at least *some* sign that my SIM is being recognized, but rejected due to network-locking, no?
Thanks again!
See thats the thing. With a foreign SIM card in the device, IF LOCKED, simlock.exe should run automatically on startup and ask for the code....so honestly I do not know if your device is messed up somehow, or if its just being wonky for the sake of being wonky. Perhaps you might want to flash a new Radio ROM and see if it then recognizes your SIM. BE SURE to NOT flash one with .51 in its name.
Thanks again. Can you point to a thread with detailed instructions for flashing a new radio ROM for my device? I found many threads while searching and I am confused. I don't want to choose the wrong instructions and brick this device; I haven't done anything of this sort before.
Look at the top of these forums for a stickie by Snarksneeze that will teach you everything you need to know.
Hi again... I don't have a spare 8GB MicroSD card lying around. Is there any way I can do this flashing over USB? I did read that there's a risk associated with flashing over USB (cable yanks, power loss, etc.) but I did flash the newest ROM without any issue, and hopefully I can do the same for the new Radio ROM.
The Radio version shown in the 'About Phone' section is 2.14.50.04, btw.
You can use your 16GB that came with the phone, or any other one for that matter. That requirement is more of a recomendation really. I have flashed with my stock 16GB many times. And yes, you can do it via USB aswell.
OK, so I have more information about the problem. I got the phone unlocked (I heartily recommend 'fastunlocker' on eBay) thinking that it would solve the issue... but it didn't. But, on a lark, I tried my friend's post-paid T-Mobile SIM in the HD2 and it worked! My AT&T pre-paid SIM does not... can this be a problem? The damn thing works nicely in other (unlocked) phones.
Is anyone else successfully using a AT&T GoPhone (prepaid) SIM on a TMOUS HTC HD2?
It may very well be the problem then. I have heard that some phones are incompatible with pre-paid SIMs.
God, that would suck donkeyballs. Can someone confirm that an unlocked TMOUS HD2 does not work with AT&T GoPhone prepaid SIMs?
had this same exact issue and realized that one of the pins in the sim card reader was stuck in the down position. I poked it with a small screwdriver and it popped back into place. works like a charm now.
Thanks for the reply. Are you sure this is the issue? As I mentioned in a previous post in this thread, my friend's T-Mobile SIM works nicely with the phone.
EDIT: Also, are you using it with an AT&T GoPhone SIM?
Bump... anyone?
Final bump: maybe I am SOL. :'(
Is anyone successfully using a TMOUS HD2 with an AT&T Prepaid (GoPhone) SIM?
Give it some time. Sometimes threads at XDA stay dormant for months and then suddenly BAM! a breakthrough happens.
I would say its your sim. How old is it?
I had the exact same problem. I bought a HD2 off cl and put my sim in and got the no sim message and exclamation point. I was using a sim from the voicesteam days but guess what it worked just fine in the Nexus one I had just gotten so I figured it had to be the phone. I finally used a friends sim and it worked fine. So I would turn the phone off in settings then slip his sim out with the battery still in and put my sim in and turn the phone back on. Guess what, it would work for about 10 min then it would suddenly go back to no sim message. So I went and got a new sim from T-Mobile and walla works like a charm. So try what I did and if you end up with the same problem try a new sim from AT&T. I don't know what is different about the HD2 but there something about the older sims that it doesn't like.
Hope that helps!
Hey... thanks for ther reply! My SIM is brand new (about two weeks old). I will however go to the AT&T store and get it replaced to see if it fixes the problem. Thanks again, I appreciate it.
Dear look my problem...
ashasaur said:
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Click to expand...
Click to collapse
-----------
I have a HTC HD2 working excellent with my card. Some day i received message : card is missing ....like you.
But restarting 2-3 times all ok. In a week the same problem again here.
Now i cant make a call. The same card in another hd2 works good. Any other card in MINE phone is missing...
Please help me.
Many thanks
[email protected]
Hello
After I install FR008 , I LOST MY SIGNAL IN MY ARIA . I cann't even connect to the network at all . I keep getting no services or Limited services .
When i search Manually for an Operator I keep getting , the sim card can't be connected to ... .
HOW TO SOLVE THIS ISSUE ?
I have tried 2 radios .
1- liberty-radio47.41.35.10H_7.09.35.13-signed
2- liberty-radio47.54.35.20H_7.13.35.13-signed
HELO PLZ PLZ PLZ
Wow, odd. I had a similar issue. I would look at my phone and have no service (ATT in NYC - YOU GET SERVICE). Then maybe I thought it was my office building, nope. Also tried different radios. Nope.
Went to CM61.1 and never had another issue.
I had same issue randomly before. Though setting network types bring my signal back. In case you wanna try it:
- Dial *#*#4636#*#*
- Phone Info
- Bottom of the screen, try to change "Set preferred network type".
maevro said:
Wow, odd. I had a similar issue. I would look at my phone and have no service (ATT in NYC - YOU GET SERVICE). Then maybe I thought it was my office building, nope. Also tried different radios. Nope.
Went to CM61.1 and never had another issue.
Click to expand...
Click to collapse
it didn't work either on CM6.1.1
barisahmet said:
I had same issue randomly before. Though setting network types bring my signal back. In case you wanna try it:
- Dial *#*#4636#*#*
- Phone Info
- Bottom of the screen, try to change "Set preferred network type".
Click to expand...
Click to collapse
didn't work .
any other help ?
Do you have the cover on it?
jznomoney said:
Do you have the cover on it?
Click to expand...
Click to collapse
yes , i tried both way
The Phone is UNLOCKED thought .
I tried to put At&t SIM and It worked now . But when i put my Other SIM Card it doesn't work and It Says , Limited Services .
HOW TO SOLVE THIS ISSUE ?
dr.saad said:
The Phone is UNLOCKED thought .
I tried to put At&t SIM and It worked now . But when i put my Other SIM Card it doesn't work and It Says , Limited Services .
HOW TO SOLVE THIS ISSUE ?
Click to expand...
Click to collapse
Something similar to this happened to me.
I had CM6, and (without thinking) did a factory reset of the phone (Settings/Privacy/Factory data reset).
When the phone rebooted, it didn't recognize the SIM card. I almost [email protected]#t bricks. The card wouldn't work in any other phone, but other SIM cards worked fine in the Aria.
The solution was to un-root/reinstall stock at&t Android ROM and take it to the at&t store. They replaced my SIM card.
DanGeorges said:
Something similar to this happened to me.
I had CM6, and (without thinking) did a factory reset of the phone (Settings/Privacy/Factory data reset).
When the phone rebooted, it didn't recognize the SIM card. I almost [email protected]#t bricks. The card wouldn't work in any other phone, but other SIM cards worked fine in the Aria.
The solution was to un-root/reinstall stock at&t Android ROM and take it to the at&t store. They replaced my SIM card.
Click to expand...
Click to collapse
At&t sim worked fine after stock Rom even thought with FR008 Rom , but STC sim didn't work at all , and It was working fine before i Update .
dr.saad said:
At&t sim worked fine after stock Rom even thought with FR008 Rom , but STC sim didn't work at all , and It was working fine before i Update .
Click to expand...
Click to collapse
Did the STC SIM card work in any other phone?
I'm guessing that when you flashed the ROM, it hosed the SIM card.
Please check to see if the STC SIM card works in another unlo.cked phone. If it doesn't then it's been damaged. If it DOES work in another phone, then there's something going on with how your phone is interacting with the network/radio software on the device.
DanGeorges said:
Did the STC SIM card work in any other phone?
I'm guessing that when you flashed the ROM, it hosed the SIM card.
Please check to see if the STC SIM card works in another unlo.cked phone. If it doesn't then it's been damaged. If it DOES work in another phone, then there's something going on with how your phone is interacting with the network/radio software on the device.
Click to expand...
Click to collapse
DAMN
NOOOOO
It's not working NOW in my other phone !!!
what should I DO ???
plz i need help
dr.saad said:
DAMN
NOOOOO
It's not working NOW in my other phone !!!
what should I DO ???
plz i need help
Click to expand...
Click to collapse
It sounds like the SIM card is bad. You should get a replacement.
I'm not an expert on this, and can only suggest. If other cards work in the phone you're probably ok.
Sent from my Liberty using XDA App
DanGeorges said:
It sounds like the SIM card is bad. You should get a replacement.
I'm not an expert on this, and can only suggest. If other cards work in the phone you're probably ok.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
I just called STC and they said there is a network problem in USA .
IS it possible ??
dr.saad said:
I just called STC and they said there is a network problem in USA .
IS it possible ??
Click to expand...
Click to collapse
What error are you seeing? When I had a problem, the device said there was no SIM card present. It wasn't just "no service."
If an at&t card works on the phone you are fine. You just need to fix carrier issues.
If you want, unroot and load the stock ROM from at&t and try the SIM.
Sent from my Liberty using XDA App
DanGeorges said:
What error are you seeing? When I had a problem, the device said there was no SIM card present. It wasn't just "no service."
If an at&t card works on the phone you are fine. You just need to fix carrier issues.
If you want, unroot and load the stock ROM from at&t and try the SIM.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
i tried , didn't work
dr.saad said:
i tried , didn't work
Click to expand...
Click to collapse
What didn't work?
I'm trying to help (with my limited knowledge).
It really sounds like the STC card is bad.
When you start the phone, do you see a big picture of a SIM Card displayed? If so, that means one of the following:
There is no card present
There is a card present, but it is inserted incorrectly or not completely in the slot
There is a card present, but it is either deactivated or damaged
If you DON'T see a big picture of a SIM card when the phone starts, then the SIM card is in place and not damaged. You may not have service (there is an "x" on the top left of the signal strength bars). But the card is still good. It's also possible the card is not provisioned for STC. They can re-provision it. Call them and tell them the phone's IMEI number.
I really want to help!
DanGeorges said:
What didn't work?
I'm trying to help (with my limited knowledge).
It really sounds like the STC card is bad.
When you start the phone, do you see a big picture of a SIM Card displayed? If so, that means one of the following:
There is no card present
There is a card present, but it is inserted incorrectly or not completely in the slot
There is a card present, but it is either deactivated or damaged
If you DON'T see a big picture of a SIM card when the phone starts, then the SIM card is in place and not damaged. You may not have service (there is an "x" on the top left of the signal strength bars). But the card is still good. It's also possible the card is not provisioned for STC. They can re-provision it. Call them and tell them the phone's IMEI number.
I really want to help!
Click to expand...
Click to collapse
well , the sim is present b/c I can search the network Manually but when i chose At&t to register with it , it doesn't register with the Networks available . It says' Your Sim Card doesn't Allow Connection to this Network".
thanks
dr.saad said:
well , the sim is present b/c I can search the network Manually but when i chose At&t to register with it , it doesn't register with the Networks available . It says' Your Sim Card doesn't Allow Connection to this Network".
thanks
Click to expand...
Click to collapse
Ok...I think I'm understanding now. I didn't know you searched for networks and got the error message.
The error message "Your Sim Card doesn't Allow Connection to this Network" is a good indicator that the SIM Card is defective.
Try the following. If they don't work, try purchasing a new SIM card.
switch to Airplane mode and back again
go to Settings/Wireless & network/Mobile networks and check "Use only 2G networks."
Go to the dial pad and dial *#*4636#*#* and select Phone Information. Scroll to the end and choose "GSM only" in the drop-down box above "turn off radio"
Go to http://www.amta.org.au/pages/amta/Check.the.Status.of.your.Handset and see if your phone has been reported lost or stolen and re-branded (I'm not sure where you got it, but it doesn't hurt to check).
If all else fails, I suggest getting a new SIM card from STC Mobile. Explain that it just stopped working and you need another one. They may charge you a small fee, but at least the phone will work.
Good luck,
Dan
It's working Now .
thanks
i was with tmobile and the phones ok, with that sim in there - even though it's inactive now. i've moved my number to o2 but when i put their sim in the phone, i get android.com.phone has stopped over and over again. i can't get into the mobile network part of the phone as it says to insert a sim.
thing is, the sim works fine in my old sony c905 so it can't be the sim can it? i could call from that phone and everything worked fine.
i'm going to install a rom from scratch later on and see what happens in case it's some funky software freaking out on the sim change.
Is this a standard SGS2 with no network lock?
If you have flashed a custom rom which do you have on there at moment?
try new rom or desimlock your phone
it's not a locked phone and am running criskelos at the mo.
i put the sim in the c905 again, enabled the sim lock, put it in the sgs2 again and on boot up it makes me enter that pin. after that if again doesn't see the sim for some reason
installed same rom from scratch and it works. very freaking weird!
tommo123 said:
installed same rom from scratch and it works. very freaking weird!
Click to expand...
Click to collapse
Well at least your up and running now...
true, weird though
I feel my problem is unlike others i have read about for the last few hours...
bought a phone off craigslist
s4 sgh-i337 on telus in Canada.
went to put a telus sim in and it recognizes that its in there (so sim tray must work..) but i get "Not registered on network" problem...
tried 3 different telus sims, all do the same thing..
my IMEI matches the one on the physical phone so all good there?
its not rooted as i downloaded root checker and i restored it back to factory twice...
i just want service it does not make calls or texts. everything else is fine..
what gives.. thanks for any help sorry if this specific issue has been covered!
taylorleach said:
I feel my problem is unlike others i have read about for the last few hours...
bought a phone off craigslist
s4 sgh-i337 on telus in Canada.
went to put a telus sim in and it recognizes that its in there (so sim tray must work..) but i get "Not registered on network" problem...
tried 3 different telus sims, all do the same thing..
my IMEI matches the one on the physical phone so all good there?
its not rooted as i downloaded root checker and i restored it back to factory twice...
i just want service it does not make calls or texts. everything else is fine..
what gives.. thanks for any help sorry if this specific issue has been covered!
Click to expand...
Click to collapse
Go to settings>>more netowrks>>mobile networks>>network operators..let it search then choose Telus, if it works you should see a message "registered on network" watch for it because it disappears after a few seconds.
The other thing you should check is that the network is actually up, not sure which part of the country you are in but you might want to check the Telus site to make sure they aren't just having network issues.... happened in Calgary a few months ago....
Also check network mode in settings should be set to lte/wcdma/gsm lol I set mine to GSM only and nothing worked....
Gage_Hero said:
Go to settings>>more netowrks>>mobile networks>>network operators..let it search then choose Telus, if it works you should see a message "registered on network" watch for it because it disappears after a few seconds.
The other thing you should check is that the network is actually up, not sure which part of the country you are in but you might want to check the Telus site to make sure they aren't just having network issues.... happened in Calgary a few months ago....
Also check network mode in settings should be set to lte/wcdma/gsm lol I set mine to GSM only and nothing worked....
Click to expand...
Click to collapse
thank you so much for the reply... id love to try what you said but now it wont even READ any sim after i went into telus and the silly lady there tried to put a nano sim in with the punch out of a micro sim so itd fit, and i think it bent a pin in the tray......... wtf
taylorleach said:
thank you so much for the reply... id love to try what you said but now it wont even READ any sim after i went into telus and the silly lady there tried to put a nano sim in with the punch out of a micro sim so itd fit, and i think it bent a pin in the tray......... wtf
Click to expand...
Click to collapse
Just a silly question but did the sim click into place or can it just slide ot? When it is properly in place, you should have to push it in to eject it.
Gage_Hero said:
Just a silly question but did the sim click into place or can it just slide ot? When it is properly in place, you should have to push it in to eject it.
Click to expand...
Click to collapse
no it clicks in and out like any regular sim would... but now it wont recognize that there is any SIM inside...
before i went to telus it would just fine and id get a different error (my original issue "not registered on network:")
this is dumb.. im going back to telus today, they broke my phone....
ill report back with whatever they say..
taylorleach said:
no it clicks in and out like any regular sim would... but now it wont recognize that there is any SIM inside...
before i went to telus it would just fine and id get a different error (my original issue "not registered on network:")
this is dumb.. im going back to telus today, they broke my phone....
ill report back with whatever they say..
Click to expand...
Click to collapse
So having further checked into the phone, the IMEI is blacklisted and reported lost or stolen.... That's why it worked at first and now does not!
Be careful buying used phones off Craigslist or anywhere I learned the hard way thank you for your time! :/