Hey folks
Need to take my i9500 for a screen replacement under warranty, how do I flash the stock recovery? Can't find it anywhere!
Flash a stock rom. If you don't have knox, flash a non knox stock rom.
Related
hey guys my i9500 is rooted on 4.2.2 ,i am currently running arrow rom.i just downloaded 4.3.3 official rom for my phone ,i just wanted to know whter it has to be installed in the same way as before via odin ,viz. selecting it on pda or i need to do anything else tooo.and do i need to make an efs backup also before i flash this rom.
i am a newb so plzz try to be noobfriendly
p.s i couldnt find any other post which could help me so if there is any,can you guys please post the link also
If you are still on 4.2.2, then I would recommend to not upgrade to a 4.3 stock rom. Doing so will flash the new bootloader which will setup Knox on your phone. When you have the new bootloader and you flash a custom rom, Knox wil be set to 0x1. You can read more about Knox in the Knox thread.
If you planning on flashing custom roms in the future, then stay away from official firmwares.
Lennyz1988 said:
If you are still on 4.2.2, then I would recommend to not upgrade to a 4.3 stock rom. Doing so will flash the new bootloader which will setup Knox on your phone. When you have the new bootloader and you flash a custom rom, Knox wil be set to 0x1. You can read more about Knox in the Knox thread.
If you planning on flashing custom roms in the future, then stay away from official firmwares.
Click to expand...
Click to collapse
So is should stay on 4.2.2? What about flashing roms based on 4.3.3?
any significant changes in 4.3.3 that ill be missing?
btw thanks for replying bro.
when did 4.3.3 come out
i would like to know just where is this 4.3.3 coming from ..i know 4.3 is out but have not seen any official 4.3.3 on samsung servers...or google GE edition either ..
Is this a custom rom...
Nexsss1 said:
So is should stay on 4.2.2? What about flashing roms based on 4.3.3?
any significant changes in 4.3.3 that ill be missing?
btw thanks for replying bro.
Click to expand...
Click to collapse
You can flash any custom rom based on 4.3 that you want. Because custom roms don't flash the bootloader. There seem te be some problems with sound and wifi (but i'm not sure) when you flash a custom 4.3 rom on an old bootloader. But you can always revert to a custom 4.2.2 rom. So you can just try it
Just don't flash originial firmwares. Custom roms are safe.
Lennyz1988 said:
You can flash any custom rom based on 4.3 that you want. Because custom roms don't flash the bootloader. There seem te be some problems with sound and wifi (but i'm not sure) when you flash a custom 4.3 rom on an old bootloader. But you can always revert to a custom 4.2.2 rom. So you can just try it
Just don't flash originial firmwares. Custom roms are safe.
Click to expand...
Click to collapse
Thanks for the info bro..i just wanted to know whether I would be missinganything significant If idont updateto 4.3.3 or any 4.3.3 roms, cause of the problems you mentioned
sorry to highjack the thread as its a noob question but wanted to make sure.
I am on MH8 knox 0x0.
If i flash the 4.3 MJ5 stock firmware via know will it trigger knox? i have no intention of rooting just to upgrade to official 4.3?
Hello guys,
i wanted to know, whether flashing a stock rom via odin will trip the knox counter..
i want to remove the root from my device, so i want to flash a stock rom.
my knox counter is still 0x0!
Thank you guys in advice! :laugh::laugh::laugh:
Hey
I Just Download The 4.3 stock touch wiz rom and i couldent download roms After i tried to root re root and download different recovery but i cant Download any rom Can some one help i hate touch wiz
i got back to stock rom because of warranty
If you took the time to read, you would know that downgrade isn't possible if you flash a Knox enabled bootloader.
If you want to 4.2.2 flash a custom rom.
I was in stock I9500UBUBMG1, then I used auto-root and after that I flashed cwm recovery via odin. Everything worked fine in despite of Custom Binary and custom system status in dowload mode. So tried miui rom, but after 2 months I decided to come back to stock I9500UBUBMG1.
curiously, all status are Official again.
Is that normal? since I just use stock 4.2.2 (old bootloader) or custom roms I can always return to official?
If I update via OTA will still official and show knox 0x0? (not that I would update).
If I install a 4.3 or 4.4 based rom I can return to MG1 with offical? or just if isn't TW based?
Thanks
I too have a question relevant to Knox behaviour: I am on Stock 4.2.2 MG1 firmware. I would like to Root and use Custom firmware. Any possible way not to trip Knox Counter? Anyway to save or backup my current modem / firmware, so that I can flash back to it if Knox is tripped?
mazbot said:
I was in stock I9500UBUBMG1, then I used auto-root and after that I flashed cwm recovery via odin. Everything worked fine in despite of Custom Binary and custom system status in dowload mode. So tried miui rom, but after 2 months I decided to come back to stock I9500UBUBMG1.
curiously, all status are Official again.
Is that normal? since I just use stock 4.2.2 (old bootloader) or custom roms I can always return to official?
If I update via OTA will still official and show knox 0x0? (not that I would update).
If I install a 4.3 or 4.4 based rom I can return to MG1 with offical? or just if isn't TW based?
Thanks
Click to expand...
Click to collapse
if you update your phone to a rom with knox bootloader, then you can't root and install custom recovery without tripping knox flag.. otherwise, on 4.2.2 you can root and return to stock rom(only 4.2.2) to get fully official status.. consider flashing latest roms modified to support old bootloaders.. so you can keep away all knox things... press thanks if it helps..
jk2rd said:
I too have a question relevant to Knox behaviour: I am on Stock 4.2.2 MG1 firmware. I would like to Root and use Custom firmware. Any possible way not to trip Knox Counter? Anyway to save or backup my current modem / firmware, so that I can flash back to it if Knox is tripped?
Click to expand...
Click to collapse
As we are in the old bootloader, we don't need to complain about knox, since we can flash stock MG1 back. You just need to pay attention because some custom firmware are imcompatible with old bootlader (or modem, idk) and if i'm not wrong, some custom roms can update your bootloader. There are some methods that will not turn your status to custom, but I think that auto-root and flash custom recovery is the best way to install a custom rom.
Thanks so much for that info!
I've Rooted using Ryebread76's method:
If you plan to flash custom firmware, as in a ROM, your going to trip KNOX. If you just want root, I used saferoot. It's for the VZW version, but it works just fine for the i337M.
Any suggestions on Custom Recovery / Firmware that will not change 4.2.2 MG1 bootloader?
jk2rd said:
Thanks so much for that info!
I've Rooted using Ryebread76's method:
If you plan to flash custom firmware, as in a ROM, your going to trip KNOX. If you just want root, I used saferoot. It's for the VZW version, but it works just fine for the i337M.
Any suggestions on Custom Recovery / Firmware that will not change 4.2.2 MG1 bootloader?
Click to expand...
Click to collapse
It will not trip knox, since it is not activated in MG1.
Enviado de meu GT-I9500 usando Tapatalk
Hey all, I'd like to install this rom, but my phone (S4 international GT-i9505) is KN0X tripped on 4.3. I currently run 4.3 stock. Is it safe to install this rom, and is it possible to downgrade back to 4.3 stock after?
screen said:
Hey all, I'd like to install this rom, but my phone (S4 international GT-i9505) is KN0X tripped on 4.3. I currently run 4.3 stock. Is it safe to install this rom, and is it possible to downgrade back to 4.3 stock after?
Click to expand...
Click to collapse
Yup you can flash any custom rom via custom recovery and Yes you can still downgrade your phone into 4.3 stock rom but remember not to flash a Stock 4.4.2 Kitkat firmware because flashing 4.4.2 firmware can no longer downgrade to 4.3 stock rom. Flashing any custom rom/root will trigger your knox and If you wanna know more about knox , check this thread Have a nice day.