When i connected My Note3 (9005) to my computer, it didn't show drive on my computer. How can i fix it?
I had enable usb debugging mode. When i connect my Note3(9005) to computer it always show "The dock is connected".
Does anybody help me?
Please!!!!!!
plz help me
Does anyone know how to fix it? plz help me
It's a network drive, not a harddrive. It shows up way below all the other drives, doesn't have a letter.
When I plug in my device to windows 7 pc with usb debugging ticked, it alwalys shows as samsung sm-n9500 smart phone. Its been the same for note 2, s4 etc
Sent from [email protected] Ass Note III SM-N9005
Is it set to MTP mode as well? Also does the device show up if you run the 'adb devices' command?
Sent from my SM-N900V using Tapatalk
danjng said:
Is it set to MTP mode as well? Also does the device show up if you run the 'adb devices' command?
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I have never used mtp mode, I did sucessfully run adb shell when flashing a black theme by 123hiten, Device was recognised.
Hope this help.
Sent from [email protected] Ass Note III SM-N9005
Related
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
neo1691 said:
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
Click to expand...
Click to collapse
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thanks a lot.. worked..!!!
neo1691 said:
Thanks a lot.. worked..!!!
Click to expand...
Click to collapse
you're welcome...
Help!
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thank you very much!!!
I had this problem today and the first thing I did is what you said... and it worked!
TKS
Linkakos said:
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
Click to expand...
Click to collapse
Well, you've tried what they said above? About the code and be sure of the UART and USB mode are enabled in PDA? Let us know if you tried.
ya i tried it... worked well!!
USB
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Oldfrog said:
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Click to expand...
Click to collapse
do u MOUNT your sd card from the notifications bar after connecting your usb???
Neo
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Oldfrog said:
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Click to expand...
Click to collapse
Do you mean that the usb initialisation is on when you connect the usb to the computer...
What mode is the usb on?
Eg samsung kies, mass storage etc?
Sent from my GT-I5801 using XDA App
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Oldfrog said:
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Click to expand...
Click to collapse
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
welty said:
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
Click to expand...
Click to collapse
U should find it in settings> about phone> usb settings
Sent from my GT-I5801 using XDA App
i have reinstalled drivers and usb debugging is checked. i plug usb cable to computer and it just shows usb connected , anyone else experiencing this???
b0ricuaguerrero said:
i have reinstalled drivers and usb debugging is checked. i plug usb cable to computer and it just shows usb connected , anyone else experiencing this???
Click to expand...
Click to collapse
It is normal in debug mode , use commond console, type adb devices and u will see device connected.
Sent from my GT-P1000 using XDA App
rainbow ng said:
It is normal in debug mode , use commond console, type adb devices and u will see device connected.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
idk . when it was working and i connectedmy tab to the pc it would get 2 notifications. usb connected and usb debugging
i cannot adb remount, i get device not found
I've got the same problem. If you drop down the notification and tap the usb connected entry, you can get the mount option for mass storage but no debug.
Hi,
Was just wondering. When I had my Nexus 10 connected to the PC and wanted to make a backup with the toolkit I didn't see any serial number below "adb devices" even though I had the adb drivers installed . So i went on and activated USB debugging in the developer options while being in the main menu of the toolkit . The PC told me then that new drivers where installed.
So i started thinking : is it safe for the device / the internal storage to activate USB debugging just like that while it is connected to the PC and while being in the toolkit main menu?
Thanks for your help!
Maxey said:
Hi,
Was just wondering. When I had my Nexus 10 connected to the PC and wanted to make a backup with the toolkit I didn't see any serial number below "adb devices" even though I had the adb drivers installed . So i went on and activated USB debugging in the developer options while being in the main menu of the toolkit . The PC told me then that new drivers where installed.
So i started thinking : is it safe for the device / the internal storage to activate USB debugging just like that while it is connected to the PC and while being in the toolkit main menu?
Thanks for your help!
Click to expand...
Click to collapse
The toolkit itself doesn't keep a connection to your device so it shouldn't damage anything or be unsafe.
It just execute various ADB commands through it's interface.
Beamed from my CM10.1 Galaxy Nexus
Herman76 said:
The toolkit itself doesn't keep a connection to your device so it shouldn't damage anything or be unsafe.
It just execute various ADB commands through it's interface.
Beamed from my CM10.1 Galaxy Nexus
Click to expand...
Click to collapse
Thank you, that's kind of good to hear
I have spend 2 days figuring out way to connect the phone to my pc running win 7,but no luck.Pc detects it as new device,but driver installation fails.It shows Nexus 4 as unknown device in device manager.Tried universal naked driver,but it only installs ADB drivers,and my device is recognised as ADB device.I dont have wifi in my pc,so please guide me to correct drivers or please provide solution.Im on 4.2.2
I have windows 7 on my PC and I did not installed any drivers, maybe your USB is faulty? Try connecting it into another computer and see..
You shouldn't need drivers for mtp access. Try turning off UAB debugging
Sent from my Nexus 4 using Tapatalk 2
3rdstring said:
You shouldn't need drivers for mtp access. Try turning off UAB debugging
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Tried it,will try connecting on other pc.
ashishv said:
Tried it,will try connecting on other pc.
Click to expand...
Click to collapse
Ever find a solution to this? My nexus 4 is doing this too...
jining said:
Ever find a solution to this? My nexus 4 is doing this too...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=35667806
Works great.
Hi guys, I have my N4 for about a month now but since I got it I never got MTP to detect on my laptop. I was only transferring my files through PTP(camera mode) and bluetooth so far. Now I want to transfer my Band road backup and flash custom roms so that would require me to browser through the folders on the laptop.
PTP mode only works when USB debugging is ticked though. And MTP is nowhere near. When using PTP I have to manually move the files to correct folders after disconnecting the phone from pc.
I have rooted, unlocked so i think drivers are all fine right?
I thought about Wifi transfer and such but I have limited bandwidth here and only have one laptop to try.
Sent from my Nexus 4 using Tapatalk 2
Reinstall drivers from the Nexus 4 toolkit. Go in to device manager and see if it says "Galaxy Nexus ADB Interface" (yes Galaxy Nexus). If it does, then enable USB debugging. It will show up.
Yep, unload and reinstall the driver.
Sent from my Nexus 4 using Tapatalk 4 Beta
The problem for me was Windows media player, i had to install that to be able to connect my nexus 4 through MTP to my computer.
Dont know if it helps for you, but you can try it!
What os is your laptop running? if XP then search for mtp xp fix.
Got it working. yay! Thanks guys!