Hi,
I am currently running N4 on AT&T network, but as soon as I install any custom roms radio stops working. Kernels work fine stock and Semaphore. I tried with PA and Purity Roms latest and for both its the same. I tried re flashing bootloader and radios 84, 48, 27, 33Hybrid and 33 but makes no difference nor does the temporary fix suggested by going to *#*#INFO#*#*. It works fine if I restore to stock rom. Please suggest what might be going wrong here.
**Update**
After restore I see in about > baseband is 33. After installing custom rom in fastboot mode I see 33 but once phone is up it comes blank. What should I do to fix it.
Thanks
It is an issue with your current recovery. Some versions of CWM and TWRP cause issues with the radio resulting in an unknown baseband. Which one are you using? From what I know CWM 6.0.3.5 And TWRP 2.5.0.0. should fix your problems.
Sent from my Nexus 4 using xda app-developers app
xperimentul said:
It is an issue with your current recovery. Some versions of CWM and TWRP cause issues with the radio resulting in an unknown baseband. Which one are you using? From what I know CWM 6.0.3.5 And TWRP 2.5.0.0. should fix your problems.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I am running recovery-clockwork-6.0.4.3-mako, should that be an issue ?
dub123 said:
Thanks, I am running recovery-clockwork-6.0.4.3-mako, should that be an issue ?
Click to expand...
Click to collapse
From what I can recall, that version of CWM is one of the versions that causes radio issues. That recovery is your problem. Downgrade to an earlier version of CWM and your radio should be fixed.
Sent from my Nexus 4 using xda app-developers app
xperimentul said:
From what I can recall, that version of CWM is one of the versions that causes radio issues. That recovery is your problem. Downgrade to an earlier version of CWM and your radio should be fixed.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
You sir are savior, switched to TWRP, created new recovery put in Pure Speed X and this time it works. Thanks. Someone should let them know version is broken as site still links back to it.
dub123 said:
You sir are savior, switched to TWRP, created new recovery put in Pure Speed X and this time it works. Thanks. Someone should let them know version is broken as site still links back to it.
Click to expand...
Click to collapse
Yes I'm not sure why it hasn't been addressed. Maybe it's not a widespread issue. Anyway, your're welcome and glad I was able to help.
Sent from my Nexus 4 using xda app-developers app
Related
Trying to install viper rom on my epic and when I'm in clockwork recovery mode it gives me this error:
E:/ Cant open / cache/ recovery/log
What does this mean? What can i do to resolve this. I keep getting errors when I try to install the rom.
I believe you are in the wrong version of clockwork. For the latest viperRom the cwm needs to be Orange 3.0.0.5
Reroot your phone with one click and try again. It appears your phone has lost root. If that doesn't work their are posts in the viper rom thread that describe a process of going back to stock and working your way to viper rom 4.02b. Another alternative is if you haven't flashed viper rom 4.01 first you might try that.
Sent from my SPH-D700 using XDA App
Dont think that is the problem I cant install any ROM s right now including the stock ROM.
Reflash one click root. It will reinstall clockwork for you and that might fix your issue. If not you might have to use odin to go back to stock. The links for this stuff is in the sticky above.
Sent from my SPH-D700 using XDA App
What v. are you trying to install? Is it ext4? what color is the text (v. #) in cwm?
2sslow said:
What v. are you trying to install? Is it ext4? what color is the text (v. #) in cwm?
Click to expand...
Click to collapse
CWM v2.5.1.0. I'm looking for the how to to use odin to get back to stock now
wtam1100 said:
CWM v2.5.1.0. I'm looking for the how to to use odin to get back to stock now
Click to expand...
Click to collapse
I think where i screwed up real bad is I tried to installed the viper ext 4 b4 actually installing the DK 17 2.8.
wtam1100 said:
I think where i screwed up real bad is I tried to installed the viper ext 4 b4 actually installing the DK 17 2.8.
Click to expand...
Click to collapse
Yeah you need to instal the dk28 modem first. In the epic sticky their is a version of dk28 froyo that you can flash through odin. Try that and then one click root and then instal viper rom.
Sent from my SPH-D700 using XDA App
raylusk said:
Yeah you need to instal the dk28 modem first. In the epic sticky their is a version of dk28 froyo that you can flash through odin. Try that and then one click root and then instal viper rom.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thanks for the advise got it back to stock now will try again.
wtam1100 said:
Thanks for the advise got it back to stock now will try again.
Click to expand...
Click to collapse
Got that Viper installed now. Thanks for all the help from eveyone. I know so much more about the phone now. Good learning experience even thought it was very stressfull at that time.
wtam1100 said:
Got that Viper installed now. Thanks for all the help from eveyone. I know so much more about the phone now. Good learning experience even thought it was very stressfull at that time.
Click to expand...
Click to collapse
Great news. Glad it worked out for you.
Sent from my SPH-D700 using XDA App
i need help to im stuck in clockwork 3.0.0 and my fone wont turn on can somebody help
I'm running on cybergr's hybrid v8. I flashed kf1 radio a few roms ago, and now I wanna go back to KL1 radio. I can't seem to find a flashable zip for it. Please someone link me to one or tell me how to get it back.
It does not return after flashing a new rom, even after full wipe.
only in mode ADB o fastboot for flash radio...
Have you checked Peter Alfonso's website / section in ROM manager. I believe that all radios are there in flashable .zip form.
Sent from my Nexus S 4G using xda premium
onasri15 said:
I'm running on cybergr's hybrid v8. I flashed kf1 radio a few roms ago, and now I wanna go back to KL1 radio. I can't seem to find a flashable zip for it. Please someone link me to one or tell me how to get it back.
It does not return after flashing a new rom, even after full wipe.
Click to expand...
Click to collapse
theres a radio thread in the nexus s development section, it lists all the radios for all the different variations of nexus s http://forum.xda-developers.com/showthread.php?t=1116884
I checked that link. It doesn't have kl1..
Sent from my Nexus S using XDA App
onasri15 said:
I checked that link. It doesn't have kl1..
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
i see a kl1 radio there, but its not for 9020a. whays your phone model number?
i9020T. using with wind mobile
onasri15 said:
i9020T. using with wind mobile
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=820670&stc=1&d=1324192135
Thanks alot!
I just flashed CM7 on 9020A. the baseband version is KF1.
Does anyone know if this modem supports 850 & 2100 radio bands ?
I was running cm-10 new 32gb Nexus 7 and decided to update to cm-10.1. It flashed fine but when I reboot it wont boot. If I flash again it boots fine but it doesnt matter how I flash...when I reboot it just goes into a bootloop (google black screen).
Please, any advice?
Sounds like the download is bad. Try downloading again and use adb to put it on the Nexus.
davisac said:
Sounds like the download is bad. Try downloading again and use adb to put it on the Nexus.
Click to expand...
Click to collapse
I rooted with the Tool Kit and the version was 4.1.1. After I rooted and unlocked, I flashed cm-10 stable. Used it for a while and everything was fine. Last night I flashed like 4 different ROMs with the same result...bootloop after a reboot. I noticed on the first ROM, when I finished the setup and rebooted. Should I go back to stock but with 4.2 using the Tool Kit and then root again?
Wally72 said:
I rooted with the Tool Kit and the version was 4.1.1. After I rooted and unlocked, I flashed cm-10 stable. Used it for a while and everything was fine. Last night I flashed like 4 different ROMs with the same result...bootloop after a reboot. I noticed on the first ROM, when I finished the setup and rebooted. Should I go back to stock but with 4.2 using the Tool Kit and then root again?
Click to expand...
Click to collapse
Yeah I would see if stock is doing that too. If so it sounds like something wrong with your device not the software.
Sounds like someone didn't do a factory reset between flashes....
Sent from my Nexus 7 using Tapatalk HD
davisac said:
Yeah I would see if stock is doing that too. If so it sounds like something wrong with your device not the software.
Click to expand...
Click to collapse
Pirateghost said:
Sounds like someone didn't do a factory reset between flashes....
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I have TWRP and this bootloop only happens on 4.2 ROMs. 4.1.2 runs fine, and I flashed it afterwards to see if it is the tablet. It Reboots fine with 4.1. As far as factory reset...I rather flash clean, so YES I did the full wipe.
Thx for your replys guys. I really appreciate it.
Wally72 said:
I have TWRP and this bootloop only happens on 4.2 ROMs. 4.1.2 runs fine, and I flashed it afterwards to see if it is the tablet. It Reboots fine with 4.1. As far as factory reset...I rather flash clean, so YES I did the full wipe.
Thx for your replys guys. I really appreciate it.
Click to expand...
Click to collapse
What version of TWRP are you using? You need to be on the latest for 4.2 roms. 2.3.3.0 I think.
davisac said:
What version of TWRP are you using? You need to be on the latest for 4.2 roms. 2.3.3.0 I think.
Click to expand...
Click to collapse
I do have 2.3.3.0, but guess what....I found the problem! I was flashing M-kernel because I read that that kernel is great for playing games. Since I have a whole bunch of games, I decided to flash it. All the ROMs I flashed...I flashed with that kernel, and it booted fine. My issue was at reboot. Every time it put me on a bootloop. I just finished flashing grouper-M1 from CM, did my setup and rebooted, and booted fine!
Imma do some more reading to see if I can find a good kernel to run with cm-10.1.
Thank you daviac!!!!!:good:
Edit to the previous post and maybe it will help others:
The problem was not the kernel...IT WAS THE BOOTLOADERS version. I had to upgrade bootloaders. With adb I flashed the image and everything is fine!
Reading is fundamental...and I've learned my lesson!
Sent from my Nexus 7 using Xparent SkyBlue Tapatalk 2
There is a disclaimer before installing M-Kernel or probably any other kernel, that states that you need to be on the latest bootloader version. But it's ok, its best to learn from mistakes right?
Leonhan said:
There is a disclaimer before installing M-Kernel or probably any other kernel, that states that you need to be on the latest bootloader version. But it's ok, its best to learn from mistakes right?
Click to expand...
Click to collapse
Lol...after flashing I don't know how many ROMs and getting those bootloops...I went back to that thread and that's how I decided to flash the image. And you're right...some people like me just learn the hard way!!! Currently running Dirty AOKP with M-Kernel, and love it.
Thx!:thumbup:
Sent from my SGH-T889 using Xparent SkyBlue Tapatalk 2
Wally72 said:
Edit to the previous post and maybe it will help others:
The problem was not the kernel...IT WAS THE BOOTLOADERS version. I had to upgrade bootloaders. With adb I flashed the image and everything is fine!
Reading is fundamental...and I've learned my lesson!
Sent from my Nexus 7 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Hey, I got same problem with you.
How do you upgrade bootloader? My bootloader version is 4.1.3.
Thanks before.
inex_emo**** said:
Hey, I got same problem with you.
How do you upgrade bootloader? My bootloader version is 4.1.3.
Thanks before.
Click to expand...
Click to collapse
That's the latest version.
ok so i installed [RECOVERY]SGH-I337 OUDHS Recovery - now with smart auto-loki and downloaded the miui from [ROM][PORT]MIUI for GT-I9505[21/06] it booted up just fine. i then replaced libril.so and libril-qc-qmi-1.so from a working rom to /system/lib/ but still couldnt get data working.. everything else from what i could tell worked just no mobile network so i restored nandroid.. if any1 interested in getting a working miui for us
how did u even get it to boot? i keep getting stuck on mi screen
U gota have the cwm recovery that auto lokis kernals and just flash rom and gapps
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
i think it is because i didnt flash gapps. thank you though. ill see if i can help
xwill1212 said:
i think it is because i didnt flash gapps. thank you though. ill see if i can help
Click to expand...
Click to collapse
Ive tried these steps to no luck im using ouhds auto loki recovery
Have you tried manually adding the APN settings after initial install? Only issue you'll have is needing WiFi for gapps setup and sync. Too many potential problems flashing another ROM's libs IMO.
Sent from my SGH-I337 using Tapatalk 4 Beta
On the n4 using purity rom 4.4.2 mako with a clean flash with Franco kernel Plus flashed but getting a message on supersu that the phone is not rooted and the Superus binaries aren't installed ... So re-rooted the phone with the n4 toolkit and everything went well but still supersu says phone is not rooted.... Help please!
Update binaries or download a recent cwm flashable supersu and flash it . Just Google it and you'll be o.k.
Sent from my Nexus 4 using XDA Premium 4 mobile app
bladebuddy said:
Update binaries or download a recent cwm flashable supersu and flash it . Just Google it and you'll be o.k.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How do you update the binaries because flashed the cwm update superus and I'm still getting the same message. Shown in the screen shot
jdpl123 said:
How do you update the binaries because flashed the cwm update superus and I'm still getting the same message. Shown in the screen shot
Click to expand...
Click to collapse
Go here, http://download.chainfire.eu/376/SuperSU/UPDATE-SuperSU-v1.89.zip
Download, Flash via recovery. Problem should be solved.
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
Go here, http://download.chainfire.eu/376/SuperSU/UPDATE-SuperSU-v1.89.zip
Download, Flash via recovery. Problem should be solved.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
That is the one I downloaded but after the flash and I click on reboot. A message saying that the rom may flash a stock recovery and gives me the option to disable the stock recovery or not. Is this normal... Btw the first time flashing I disabled don't want to click on no just in case of a brick so want to know what's the message is about...
jdpl123 said:
That is the one I downloaded but after the flash and I click on reboot. A message saying that the rom may flash a stock recovery and gives me the option to disable the stock recovery or not. Is this normal... Btw the first time flashing I disabled don't want to click on no just in case of a brick so want to know what's the message is about...
Click to expand...
Click to collapse
Nope. Never seen that message. Then again, I use twrp.
Sent from my Nexus 7 (2013)
Are you using latest cwm? But then again, this always happen with cwm. On twrp never have a single problem with supersu.
Berrydroidcafe said:
Nope. Never seen that message. Then again, I use twrp.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
Ok using the toolkit can I switch to twrp with out any data loss or changes to the rom?
arffrhn said:
Are you using latest cwm? But then again, this always happen with cwm. On twrp never have a single problem with supersu.
Click to expand...
Click to collapse
Also Yes updated to the latest cwm.. Just want to use xposed and tweak some functions in trickster mod. If nothing else work do you guys know any good 4.4 roms that uses cm kernels?
jdpl123 said:
Ok using the toolkit can I switch to twrp with out any data loss or changes to the rom?
Click to expand...
Click to collapse
Yes you can flash TWRP without losing data or changes to the rom.
Sent from my Nexus 7 (2013)
Berrydroidcafe said:
Yes you can flash TWRP without losing data or changes to the rom.
Sent from my Nexus 7 (2013)
Click to expand...
Click to collapse
Thank you guys (and ladies) for the help. Switched to twrp and flashed binaries updated! (^o^)