i have TP link 740N router and wifi was working from many days until today
i was using on hd2(2.3.5 modded rom) n sgs i9000 (2.3.4 stock rom) n it was working till last night.
but now today it isnt working so i restored factory settings still it didnt worked then i was going to flash the rom again but before that i tried on sgs,it connects to wifi on both but i cant browse or use tapatalk or anything,i even tried dns1 n dns2 still in vain,though its working on laptop and desktop too,i dont know what the hell is wrong,any1 help please
i have tried hard reset both methods but every time when hd2 boots up,everything looks the same n all app still installed
Set DNS1 & DNS2 in WiFi settings rather than in Build.prop
i figured it out
i had to set ip, net mask, n gate way as well,n now it started working
thanks
WARNING:
This update zip use write mot_boot_mode as shell script to run bootmenu,
don't modify it. otherwise, maybe you will get stop at M logo.
NOTICE: This update zip is ONLY for mb511, if you want to update, please check your stock rom.
If you use this update zip at charm(mb502), is unstable, mb502 and mb511 still has some different.
My STOCK ROM VERSION:
Code:
RUTEM_U3_01.14.16_DEBLUR_SIGNED_USARUTH15ND0RTINT056.0R_PDS000_USARUTHEHKTWEMARA_P011_A010_HWp3_1FF.sbf
If you try to call, but can't hear sound or can't registration of the carrier network, try this ROM version to update RC version.
RC version 5: v0.7.4
configure sources
NOTICE:If you want update fix zip, you should use bootmenu to update.When boot at motologo,click click and click "vol -" to enter bootmenu.
->because bootmenu executed by mot_boot_mode, so /system can't umount, only can remount.
--and update zip have to modify updater-script, remount /system.
[2013/11/13]:
last update:
Seems we can use the command of telnetd to do emergency rescue.
I write telnetd as shell script. It's only to execute bootmenu, if someone modify mot_boot_mode maybe cause bootmenu can't execute.
The telnetd will execute by eclair's init_mapphone30_umts.rc. But it's only can use bootmenu to execute adb to do some things (ex. modify mot_boot_mode).
These days, I try using 2ndboot, but still freeze on hbootmod, I don't know why we can't execute hbootmod.
I can't find anything solution, and can't get more message.
For me, it's hard to debug, I'm not kernel developer. I try to understand the source code of hbootmod, should stuck on do_branch.
But I still can't get any idea to solve this question.
Hope someone can complete it, let we can use new kernel.
RC version 5 should can be a stable version.
[2013/10/04]:
RC version 5:
Seems when I try fix camera, has incorrect modify of sensors. Fix incorrect modify.
write shell script /etc/init.d/07cphostapconf, copy /system/etc/wifi/softap/hostapd.conf to /data/misc/wifi/hostapd.conf
modify updater-script, clear /data/dalvik-cache. if already upgraded previous version update zip, should can direct flash RC5, skip double wipe.
[2013/09/26]:
20130926.zip:
I forget modify configure sources of buttonblink.sh.
old buttonblink.sh file will get bad battery life.
[2013/09/19]:
20130919.zip:
According to this, use smartass is more stable, thanks edgarsongla.
modify init.mapphone30_umts.rc, set smartass as default and delete cpufreq_interactive.ko.
[2013/09/18]:
for traditional chinese user:
fork tcime unofficial for flipout.
upload tcime.apk for flipout.
source code
[2013/09/16]:
baseband:
use and modify cyanogenmod4milestone's configure files of mmparts.
but I'm not do full test, should be ok.
reduce reboot times:
seems wakelock cause reboot, I guess.
these steps maybe can reduce reboot times.
disable wi-fi or don't set wi-fi sleep policy at never.
disable Android debugging.
but maybe still has reboot problem. I can't find solution.
[2013/08/28]:
camera:
use and modify CyanogenKobe's configure of libcamera.
fix part of camera. Take picture is normal, solved rotation 90 degree problem. But video recorder still rotation 90 degree.
wifi:
use stock rom's files.
media:
add libraries of 720p files. but 720p still has problem.
[2013/08/15]:
fix part of magnetic sensor, tested by google map.
modify lights code. when enter standby to check notification, if exist set buttons backlight on.
and if already standby when get notification, set blink and backlight on.
delete /system/etc/init.d/99buttonblink, modify /system/xbin/buttonblink.sh(for enter standby and exist notification use).
[2013/08/08]:
seems write to Android services will get bad use of battery.
so write to /system/etc/init.d/99buttonblink, to start service (check blinking of buttons backlight).
[2013/08/01]:
fix notification blinking of buttons(menu, home and back) backlight.
[2013/07/03]:
find the way to compile tiap_drv.ko
-->if get error, try this command then reboot.
Code:
cp /system/etc/wifi/softap/hostapd.conf /data/misc/wifi/hostapd.conf
modify overlay of auto brightness and notification LED.
[2013/06/26]:
use CyanogenModXT720's libaudio.so, ril should be normal.
use CyanogenModXT720's dsp directory.
get some kernel modules from CyanogenModXT720.
-->seems tiap_drv.ko can use, but still has problem, try to fix in next version.
[2013/06/23]:
define open keyboard of orientation by overlay.
modify BoardConfig.mk.
use cyanogenmod4milestone's apns-conf.xml.
use "mka bacon" to compile cm7.
separate gapps:
-->attachments gapps.zip for bootmenu use.
can work:
camera
battd
fmradio
bluetooth
gps
sensors
usb connect
audio
half work:
video
-> 720p has problem.
wifi
->I only use 2G service, so I can't test softap.
ril
->I only use 2G service, so I can't test 3G.
use mknod to replace mv /dev/xxx
[2013/04/01]:
resume original parameter in init.mapphone30_umts.rc
->symlink /dev /dev/netmux
I don't know why I deleted it...
modify /system/bootmenu/2nd-init/init.rc:
/mnt/sdcard -> /sdcard
modify void.fstab:
/mnt/sdcard -> /sdcard
delete /system/etc/init.d/02movedevice
fix sdcard mount question.
replace files by upload zip, and delete /system/etc/init.d/02movedevice. Or wait release new version.
fix in preview version 2.
In terms of audio recorder, following information may help:
Flipout uses Sample Rate '16KHz' or "22KHz" to record sound, NOT '44KHz'. This is why flipout cannot use skype >_<. If you guys are using a recorder that uses Sample Rate "44KHz" (which almost all recorders set as default Sample Rate), you have to change the setting.
No phone to test
>.<
Sorry guy I can't help
May be I can help to fix this bugs.audio,fmradio,sensors,camera,ril&wifi,look this:https://github.com/xn-Dream/android_device_motorola_sage-1,and you can pm me else.
Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.
sim unlock problem
Hi, first thanks for do this ROM :good:
I install but when start now the system want to give a sim unlock code, I was use before so do u have any idea or something that i have to do to solve this problem
Sorry for my english is not my native language
Best regards
phchshow said:
Seems use mb508's libaudio.so can use video(low quality,landscape orientation) and audio recorder.
-- hard decoding still problem, can use some player (like mxplayer) to play with soft decoding.
-- Spirit FM will be no sound.
-- call phone number still no sound.
[2013/04/02]:recompile cm7 with mb508's libaudio.so
Now we can hear sound from the other side , but the other side can't hear what I say .
But use speaker it's no problem.
Click to expand...
Click to collapse
error log
about 3G
3gw.Service 7225 Mobile Network not connected - not roaming
about codec
Error TIOMX_CORE 2045 dlopen libOMX.TI.720P.Decoder.so failed because Cannot load library: load_library[1111]: Library 'libOMX.TI.720P.Decoder.so' not found
Info TI_Video_Decoder 2045 TI Video Decoder
Error OMXCodec 2045 Profile and/or level exceed the decoder's capabilities.
Error MediaPlayer 16597 error (1, -2147483648)
Error MediaPlayer 16597 Error (1,-2147483648)
Error MX.Player.Joint 16597 1st error: what=1 extra=-2147483648
Use 508 libOMX.TI.720P.Decoder.so put into system/lib
Error OMXCodec 2048 [OMX.TI.720P.Decoder] ERROR(0x80001009, 1)
I'm impressed that you finally got it working, but i have a evil kind of Bug around here!
The Play Store vanishes every Reboot, Titanium says it is Frozen and im unable to unfreeze it.
If i can i would provide a logcat in the next hours!
Anyway, awesome to finally see 2.3.7 on MB511 ^^
//EDIT: I connected the Device with the Internet, now it is working fine ^^
everything is working except that when phone reboot version is still 2.1 and nothing changed :/
adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Integrate to fix-20130413.zip.
phchshow said:
adout keylayout:
unzip keylayout.zip
--init.mapphone30_umts.rc
--init_prep_keypad.sh
to /system/bootmenu/2nd-init/
chmod 0644 /system/bootmenu/2nd-init/init.mapphone30_umts.rc
chmod 0755 /system/bootmenu/2nd-init/init_prep_keypad.sh
Click to expand...
Click to collapse
Is This QWERTZ?
Should be QWERTY.
There are two files, ruthp0-keypad.kl and ruthp1-keypad.kl.
use this command
"cat /proc/device-tree/[email protected]/[email protected]/name"
My device get ruthp1-keypad.
If you want to use QWERTZ, you can try replace ruthp0-keypad.kl, ruthp1-keypad.kl, ruthp0-keypad.kcm.bin and ruthp1-keypad.kcm.bin.
Get from QWERTZ version.
ShockBuddy said:
Is This QWERTZ?
Click to expand...
Click to collapse
Maybe can solved Turn on USB storage problem.
Integrate to fix-20130413.zip.
if replug usb, maybe has problem, use killall com.motorola.usb to reset usb.
Hi to all,
Thanks to all that are working on this rom.
Since both models are merged in the same post because the same hardware, I wonder if I can deploy this rom into a Motorola Charm, or if I got to make changes on code, I guess at least have to change some files where refers to 511 to 512, and where refers "Ruth" to "Charm".
What other changes should I do to make this model work?
Thanx for response.
Please help
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!
just the key pad related files, I was unable to compile this ROM from source using charm files, I think an update file to replace keypad files with charm should do the trick.
I shall try it and let you know.
there are so many attachments here
please put them into #1
Great job, men!
netmanmac said:
Please help me, How do i do to work because i have not service,
The problem is SIM NETWOR UNLOCK PIN
Please HELP!!!!
Click to expand...
Click to collapse
I dont have the Issue and i haven't inserted any SIM Card, it should be enough to reboot without Sim Card.
If you get to Homescreen, use a Root Explorer and edit /system/build.prop, check if
Code:
keyguard.no_require_sim=xyz
is set to "false", if it isn't in there, add it!
Hope i helped :fingers-crossed:
finally installed.is the screen orientation working good?when i flip out the keyboard the screen orientation remains protrait,pretty annoying!anyway great job,never though i'd have seen cm on flipout!love this device,unlike any other
Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
sylvisj said:
Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
Click to expand...
Click to collapse
Have you tried removing the .cid.info file ?
Using a terminal app type the following:
Code:
su
rm /data/.cid.info
On some ROM's have have to do this after every time I have rebooted the phone, not quite sure why but it works for me.
TrallaP said:
Have you tried removing the .cid.info file ?
Using a terminal app type the following:
Code:
su
rm /data/.cid.info
On some ROM's have have to do this after every time I have rebooted the phone, not quite sure why but it works for me.
Click to expand...
Click to collapse
Hello,
Thanks for the suggestion. I fired up Terminal Emulator, su'd, and it doesn't look like there is a .cid.info in /data/. There is a .psm.info, though, and .npswifi_stream - I don't know if they're related at all.
sylvisj said:
Hello,
Thanks for the suggestion. I fired up Terminal Emulator, su'd, and it doesn't look like there is a .cid.info in /data/. There is a .psm.info, though, and .npswifi_stream - I don't know if they're related at all.
Click to expand...
Click to collapse
Here's the 'ls -a' output for /data:
Code:
[email protected]:/data # ls -a
.container_1
.container_2
.container_3
.layout_version
.mtp_stream
.npswifi_stream
.pcsync_stream
.psm.info
.socket_stream
.ssh
anr
app
app-asec
app-lib
app-private
audio
backup
bcmnfc
bluetooth
cam_socket0
cam_socket1
container
dalvik-cache
data
dontpanic
drm
fota
hostapd
local
log
lost+found
media
misc
nfc
property
qcks
radio
resource-cache
security
shared
ssh
system
time
tombstones
user
wiper
wpstiles
Bump.
I have the same problem......
ninne1 said:
I have the same problem......
Click to expand...
Click to collapse
Bump again.
i think it's missing IMEI and EFS. Try this http://forum.xda-developers.com/showthread.php?t=1264021
r47z said:
i think it's missing IMEI and EFS. Try this http://forum.xda-developers.com/showthread.php?t=1264021
Click to expand...
Click to collapse
I dunno about EFS, but I know the IMEI is already correct - *#06* is showing the same IMEI as the label on the back of my phone.
My phone is work well after flashing CM, but no WIFI.
No /data/.cid.info file!
*#06# - show IMEI.
Did we ever get to the bottom of this?
Im having exactly the same problem, so bump. Its been like that for 6 months, my workaround so far was getting a bigger data subscribtion since 4g is working fine
sylvisj said:
Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
Click to expand...
Click to collapse
Hi sylvis,
I realize that this is an old post. However. perhaps this thread will help someone else:
I flashed a Samsung Galaxy S4 (T-mobile SGH-M919) to CyanogenMod (CM11) this weekend. It worked ok for a couple days. The owner then said that they can't get any WI-FI. I found your post here and read with optimism that I might be able to fix this problem. Our problem was exactly "word for word" the same problem as you described in your original post. (Well almost exactly; we couldn't get "USA" to stick as the region code)
Before flashing the phone, I did install Philz ClockworkMod and did do a backup of the OEM ROM before flashing to CM11. That said, I found that I did not have to go down the road of restoring a missing IMEI file (as other threaders here describe). Here's what worked for me:
I dialed *#06# on the phone to see if there was an IMEI number present, and there was. I wrote down that number. So I decide to see if that number matched the printed number on the phone, that we can find under the battery.
Before I do a power off of the phone, I recall that I had turned OFF both Bluetooth and Mobile Networks. WI-FI was still turned ON, but in it's non-functional "greyed out" state like you and I both experienced.
Now I power off the phone, take off the back cover, and take out the battery to have a look at the printed IMEI number. Yes, it does march the number that I saw via *#06#.
I had to get up to do something, then returned a couple minutes later. I popped in the battery and restarted the phone. To my utter surprise, WI-FI was back up! In "Advanced" I now see the MAC address and the region is locked on USA
I turn on Mobile Networks, and WI-FI's still working. Being the fool that I am, I have to test this further. So I power off the phone again and just let it sit there for a couple minutes. I power back on and there is still JOY. Problem resolved and happy customer.
In closing: I don't think that the removal and reinsertion of the battery was the total solution, because the owner had already tried that. However, the owner did not let the phone sit with the battery removed for very long. They just popped it out, waited a couple seconds, then popped it back in. I think the total solution was having WI-FI enabled, Bluetooth and Mobile disabled, then doing a power off, with an extended wait time before reinserting the battery.
Hope that helps.
Regards,
Brcobrem
I have installed [CM7]JOYOS ported based cm7.2[percy_g2] http://forum.xda-developers.com/showthread.php?t=2396158 rom on my galaxy y.
Everything is working fine except wifi hotspot.. When i turned on wifi hotspot ,it is shown on other devices..but on connecting,.it stuck on obtaining IP address. Even after entering static IP details... i cant access net on other device.
I tried to resolve it with foxfi app & wifi tether for root app..but no luck.. Plz help me..how to resolve this issue..
jonny789 said:
I have installed [CM7]JOYOS ported based cm7.2[percy_g2] http://forum.xda-developers.com/showthread.php?t=2396158 rom on my galaxy y.
Everything is working fine except wifi hotspot.. When i turned on wifi hotspot ,it is shown on other devices..but on connecting,.it stuck on obtaining IP address. Even after entering static IP details... i cant access net on other device.
I tried to resolve it with foxfi app & wifi tether for root app..but no luck.. Plz help me..how to resolve this issue..
Click to expand...
Click to collapse
hey
obtaining ip must be a problem on other device not on yours
press thanx
jonny789 said:
I have installed [CM7]JOYOS ported based cm7.2[percy_g2] http://forum.xda-developers.com/showthread.php?t=2396158 rom on my galaxy y.
Everything is working fine except wifi hotspot.. When i turned on wifi hotspot ,it is shown on other devices..but on connecting,.it stuck on obtaining IP address. Even after entering static IP details... i cant access net on other device.
I tried to resolve it with foxfi app & wifi tether for root app..but no luck.. Plz help me..how to resolve this issue..
Click to expand...
Click to collapse
Reflash the kernel then the Tom
Go to recovery
Mount system
Flash Percy kernel or black reactor
Reboot recovery
Format data,cache,system
Mount all
Flash the Tom
Reboot
Additional thing : go to system / etc / wifi and set permission of folder to rwxrwxrwx and the wifi compliant *I don't remember exact name* to rwxrwxrwx too and try.
Sent from my GT-S5360 using Tapatalk 2
mohamedrashad said:
Reflash the kernel then the Tom
Go to recovery
Mount system
Flash Percy kernel or black reactor
Reboot recovery
Format data,cache,system
Mount all
Flash the Tom
Reboot
Additional thing : go to system / etc / wifi and set permission of folder to rwxrwxrwx and the wifi compliant *I don't remember exact name* to rwxrwxrwx too and try.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
another solution ????