Related
Team,
***First off I am not responsible for damaged that occurs to any phones. Make sure you know what you are doing before making changes!!!***
I was having an issue with the mic gain recording distorted live concert audio so I was wondering how to access extended features on the Galaxy S.
The following is the code to dial in to access the hidden Service Mode menus.
Example how to access menus:
Dial *#*#197328640#*#*
This allowed me to adjust the mic gain to get better audio recordings at loud live concerts.
There seems to be several hidden menus on the Galaxy S and I am wondering how many more there are. Which led me to post this thread.
If any of you can find more hidden menus post them and i'll add them to this OP.
So far I know about:
Hidden Menus:
Service Menu: *#*#197328640#*#*
GPS Hidden Menu: *#*#1472365#*#*
Battery and General Info: *#*#4636#*#*
GTalk Service Monitor: *#*#8255#*#*
LCD / Speaker Test: *#0*#
Factory Data Reset: *#*#7780#*#*
Camera Information: *#*#34971539#*#* (Do Not Use The First Option "update camera firmware" you will break your camera)
Change Power Button Action: *#*#7594#*#*
Show IMEI Number: *#06#
Be careful in Service Mode that you know what it is your changing. If you hork up your phone you can reset it by doing a Factory data reset in Settings / Privacy / Factory data reset.
I would do a nandroid backup before making changes if your just experimenting.
I will add reference material below as I can:
__________________________________________________ __
Service Menu:
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this.
_________________________________________________
Dude where you getting all these code. Nice find. You have any more? LOL
I don't which is which. I don't want to mess up anything on it.
Do you know how to work these setup menus?
Updated OP with more codes
I know how to get to the volume service menus in the phone, but does anyone know how to make the earpiece volume louder? My phone is too quiet when up to my ear (rocker volume maxed out) and I don't know what exactly to change in the service menus. I did it on my eternity but this one is a little different. any help is appreciated.
clocke said:
I know how to get to the volume service menus in the phone, but does anyone know how to make the earpiece volume louder? My phone is too quiet when up to my ear (rocker volume maxed out) and I don't know what exactly to change in the service menus. I did it on my eternity but this one is a little different. any help is appreciated.
Click to expand...
Click to collapse
go to Service Menu / Audio / Handset / Volume / RX Volume try setting it to 95
Service Menu
I found another weird one on accident involving the camera again..
*#*#7412365#*#*
brought up more information about Phone/CAM FW Ver check
Phone FW Ver Check
Phone to CAM FW Write
Several More
Do a search for any of the codes posted above (34971539, for example) and find the list below:
*#*#4636#*#* – Shows information about phone and battery.
*#*#7780#*#* – Factory Data Reset
*2767*3855# – Factory Format (All the data will be formatted including the internal memory storage)
*#*#34971539#*#* – Shows Information about the Camera
*#*#7594#*#* – Used to change the “End Call / Power” button action
*#*#273283*255*663282*#*#* – For backing up the media files
*#*#197328640#*#* – Enables the Service Mode
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* – WLAN test
*#*#232338#*#* – Shows WiFi MAC address
*#*#1472365#*#* – GPS test
*#*#1575#*#* – Another GPS test
*#*#232331#*#* – Bluetooth test
*#*#232337#*# – Shows Bluetooth device address
*#*#8255#*#* – For launching GTalk Service Monitor
*#*#0283#*#* – Packet Loopback Test
*#*#0*#*#* – LCD test
*#*#0673#*#* OR *#*#0289#*#* – Melody test
*#*#0842#*#* – Device test (Vibration test and BackLight test)
*#*#2663#*#* – Touch screen version Test
*#*#2664#*#* – Touch screen test
*#*#0588#*#* – Proximity sensor test
*#*#3264#*#* – RAM version test
The ability to force wcdma only seems to be locked out on this phone.
Sent from my Nexus One using XDA App
TGA_Gunnman said:
go to Service Menu / Audio / Handset / Volume / RX Volume try setting it to 95
Click to expand...
Click to collapse
Several there that say RX, which one exactly? And what's the maximum possible value to make the incoming ringtone/text/email notifications louder? Thank you for all this, btw.
_Opiate_ said:
The ability to force wcdma only seems to be locked out on this phone.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I noticed this as well. Very annoying. Anyone knows how to re-enable it ?
Sent from my DROIDX using XDA App
could it be that that's because the phone is locked and needs to be unlocked by the carrier
Gunnman from Galaxy S
TGA_Gunnman said:
could it be that that's because the phone is locked and needs to be unlocked by the carrier
Gunnman from Galaxy S
Click to expand...
Click to collapse
and afaik that wont happen for a long time since I believe ATT has exclusivity on it ant wont unlock it unless you go to a 3rd party...
Yes its EXTREMELY annoying especially since a use that quite often.
Sent from my HTC Liberty using XDA App
BecomingxInsane said:
I found out that if you go into the dialer and type in *#*#197328640#*#* that it will take you into a menu that will allow you to change it. From the main menu of the ServiceMode screen, select DEBUG SCREEN, then PHONE CONTROL at the bottom, then UE STATE CONTROL. From there select CHANGE RAT TO WCDMA to enable 3G only, and select CHANGE RAT TO GSM for 2G only.
Click to expand...
Click to collapse
Give that a try.
YES!!!!!!!!!!!!!!!!
Thank you. That works! I've been trying for days to get it to work but it always stuck to WCDMA. THANK YOU.
kewl im glad you all figured it out.
clocke said:
I know how to get to the volume service menus in the phone, but does anyone know how to make the earpiece volume louder? My phone is too quiet when up to my ear (rocker volume maxed out) and I don't know what exactly to change in the service menus. I did it on my eternity but this one is a little different. any help is appreciated.
Click to expand...
Click to collapse
Did we figure out how to max out the volume on incoming calls/texts? Samsung is notoriusly quiet.
What does this do??? (below copied from ealier post)
I found out that if you go into the dialer and type in *#*#197328640#*#* that it will take you into a menu that will allow you to change it. From the main menu of the ServiceMode screen, select DEBUG SCREEN, then PHONE CONTROL at the bottom, then UE STATE CONTROL. From there select CHANGE RAT TO WCDMA to enable 3G only, and select CHANGE RAT TO GSM for 2G only.
FreddieP said:
What does this do??? (below copied from ealier post)
I found out that if you go into the dialer and type in *#*#197328640#*#* that it will take you into a menu that will allow you to change it. From the main menu of the ServiceMode screen, select DEBUG SCREEN, then PHONE CONTROL at the bottom, then UE STATE CONTROL. From there select CHANGE RAT TO WCDMA to enable 3G only, and select CHANGE RAT TO GSM for 2G only.
Click to expand...
Click to collapse
Turns off 3G, and uses only GSM and EDGE (2G) to save battery life.
TGA_Gunnman said:
Updated OP with more codes
Click to expand...
Click to collapse
I found a code on nother forum but can't remember where.. When entered it asked for a password and an IME number and one other number.. I found it by accident one day when searching for 'unlock captivate' and I think it brings up the same menu that is brought up when you use a foreign sim... Would allow unlock without requiring the insertion of a foreign sim..
Anyone know this code?
hello everyone, my nexus s 4g is flashed to boost, i been using it for 3 months without problems but in the last 2 weeks the internet was working too slow and i did a hard reset to the phone with the dial code (*#*#786#*#*)
after the hard reset the phone didn't have service because the msid and phone # changed, i went into cdma workshop and restore the msid and phone # and the phone was working again, i can make and receive calls and send and receive texts
but now my problem is that the phone don't show the 3g icon and doesn't connect to internet
i will appreciate if somebody can help me get the 3g working again
thanks
This may sound stupid, but s mobile data enabled in settings -> wireless & network settings -> mobile networks ?
If it is, then have you tried enabling airplane mode and then disabling it? There are times when my NxS drops 3G connection for no apparent reason and this is one way I can get it back.
I saw this posted in the radio guide as way to "retrieve 3G data connection"
Code:
1. Go to Dialer. Dial *#*#4636#*#*
2. Go to Phone information. Choose the preferred network to
"GSM Auto PRL" or "CDMA Auto PRL" or whatever you have.
3. Scroll down, deactivate and activate Phone Radio.
4. Press Menu button.
5. Select Phone frequency, then choose your country.
6. In the previous menu push the Home button to go back to Homescreen.
7. Reboot.
(By Brainmaster)
Click to expand...
Click to collapse
Hi,
I'm using samsung vibrant and currently in india. I'm not able to connect to 3g on airtel and vodafone networks. I am using stock kb5. I tried playing around with settings in 197328640 .
Can someone help me with appropriate settings to make the 3g work on my phone.
1. Debug screen- common
2. Phone control
3. Network control
I'm not able to select combi bands in band selection
The sim works correctly on other phones.
Hi All,
I stumbled across this as I am currently not in the US to test this out. Could someone see if this actually works? It supposedly enables the LTE band 4 on this phone even though specs say that there's not LTE on it. I was hoping it would be there as it has the same hardware as the N9005.
According to the Service Mode on the N9002, you can enable VZW LTE Band 4. I believe T-Mobile also uses this band for their LTE. I enabled it for me, but I am currently in an area that I can't test it. I posted screenshots of the Service Mode, and a video capture going into the menu.
How to enter service mode:
1. At phone dialer, dial *#0011#.
2. At the service mode, hit the menu key, and select back. It looks like it did nothing, but go to the next step.
3. Hit the menu key again and select "Key Input" and type "Q". It looks like it did nothing, but go to the next step.
4. Hit the menu key again and select "Key Input" and type "0000" (zeros).
5. Wait until you see "Main Menu"
6. Select [3] LTE
7. Select [2] LTE RF
8. Select [1] VZW LTE B4 on/off
9. Select B4 Enable(). It should now have an asterik in the parenthesis.
10. Reboot phone.
Here's a screen capture on how to enable it.
Enable VZW LTD Band 4 on Galaxy Note 3 Dual Sim SM-N9002
youtu.be/-KQWaJuwOrg
If anyone can confirm this works, I'd really appreciate it.
Thanks.
Monkichi57 said:
Hi All,
I stumbled across this as I am currently not in the US to test this out. Could someone see if this actually works? It supposedly enables the LTE band 4 on this phone even though specs say that there's not LTE on it. I was hoping it would be there as it has the same hardware as the N9005.
According to the Service Mode on the N9002, you can enable VZW LTE Band 4. I believe T-Mobile also uses this band for their LTE. I enabled it for me, but I am currently in an area that I can't test it. I posted screenshots of the Service Mode, and a video capture going into the menu.
How to enter service mode:
1. At phone dialer, dial *#0011#.
2. At the service mode, hit the menu key, and select back. It looks like it did nothing, but go to the next step.
3. Hit the menu key again and select "Key Input" and type "Q". It looks like it did nothing, but go to the next step.
4. Hit the menu key again and select "Key Input" and type "0000" (zeros).
5. Wait until you see "Main Menu"
6. Select [3] LTE
7. Select [2] LTE RF
8. Select [1] VZW LTE B4 on/off
9. Select B4 Enable(). It should now have an asterik in the parenthesis.
10. Reboot phone.
Here's a screen capture on how to enable it.
Enable VZW LTD Band 4 on Galaxy Note 3 Dual Sim SM-N9002
youtu.be/-KQWaJuwOrg
If anyone can confirm this works, I'd really appreciate it.
Thanks.
Click to expand...
Click to collapse
I would like to try but i´m on lte band 3 (sweden).
should i try the same way?
tommie.r said:
I would like to try but i´m on lte band 3 (sweden).
should i try the same way?
Click to expand...
Click to collapse
I tried this on the N9002; Dual Sim variant.
If you have a different version, this might be better for you as I didn't have a custom kernel for mine.
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
I just ran the process and my phone rebooted without problems (N9005). Now, I just have to get an LTE sim card for a network that runs on those bands (I'll try to do it on this weekend and confirm if it worked).
Sent from my SM-G900F using XDA Free mobile app
Monkichi57 said:
I tried this on the N9002; Dual Sim variant.
If you have a different version, this might be better for you as I didn't have a custom kernel for mine.
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
We have the same phone, sorry I didn't mention that. I'm running a custom rom, witch I guess is only an advantage... But you enabled lte band 4 and in Sweden my carrier has band 3. I checked the other "how to" but it seems a little bit complicated and I'm a little bit worried about messing things up.
Sent from my SM-N9002 using XDA Free mobile app
tommie.r said:
We have the same phone, sorry I didn't mention that. I'm running a custom rom, witch I guess is only an advantage... But you enabled lte band 4 and in Sweden my carrier has band 3. I checked the other "how to" but it seems a little bit complicated and I'm a little bit worried about messing things up.
Sent from my SM-N9002 using XDA Free mobile app
Click to expand...
Click to collapse
It should be fine. I've done it a couple of times and it rebooted fine and connected to the area cell signals, just the area i'm currently in doesn't have any LTE.
Monkichi57 said:
It should be fine. I've done it a couple of times and it rebooted fine and connected to the area cell signals, just the area i'm currently in doesn't have any LTE.
Click to expand...
Click to collapse
Ok i´ll give it a go when i have cofimed my sim works with lte...
tommie.r said:
Ok i´ll give it a go when i have cofimed my sim works with lte...
Click to expand...
Click to collapse
Did you manage to activate lte band 3 frequencies?
I have a n9002, but i'm in Italy and VZW LTE Band 4 are not used here.
Thanks
niofar said:
Did you manage to activate lte band 3 frequencies?
I have a n9002, but i'm in Italy and VZW LTE Band 4 are not used here.
Thanks
Click to expand...
Click to collapse
I haven't gotten round to it yet, I have been far too busy with more important things...
Sent from my SM-N9002 using XDA Free mobile app
I tried here in mexico. Telcel ,Movistar, and Nextel both use band 4 for LTE. Did not connect, only H+, but also there is no menu option to switch to lte only wcdma and gsm.
rotorheadman said:
I tried here in mexico. Telcel ,Movistar, and Nextel both use band 4 for LTE. Did not connect, only H+, but also there is no menu option to switch to lte only wcdma and gsm.
Click to expand...
Click to collapse
I don't have a way to try it right now(my n9002 is at a repair shop atm), but would you mind trying this? the article says to modify the /data/property/ persist.radio.lteon file to "true" and “LTE/WCDMA/GSM (auto connect)” should show up as a selection of network preference. Can you let me know what your results are when you try it?
//smokeys.wordpress.com/2014/04/06/how-to-enable-lte4g-on-samsung-galaxy-note-3-sm-n9005/
Sorry for the long wait, wife had phone. The file was already set to true. No lte option in Network Mode menu.
Thanks for trying. I realized that my bootloader is locked so I can't flash a permissive kernel. I think that would've been able to do it I think... oh well
My SM-N9005 was crahed 4G/LTE when i test that... even if I disable, my 4G not working now
How I can deblock that ?
http://forum.xda-developers.com/showpost.php?p=59934217&postcount=1
OT
I try this and I still have only 3G/H+ on n9002.
Probably Samsung does not include LTE Modem
Poslato sa pisaće mašine Note 3 dual sim
............ ¯\_(ツ )_/¯.............
I did all your steps. But in RRC (Service mode, main page) i'm still see "RRC: IDLE, Band5" and i don't connect to band4. I checked and that band is activated.
Why?
Hey,
i've multiple ways to go into 4g only mode on the note 4 but nothing seems to work. My device is not rooted, i can dial *#0011#. But if i do Q0000, Q0 or Q then 0000 as input it shows "0" for like 0,5second and is not going into that service menu. Are there other ways? *#2263# is also not working.
Regards