Where are the developer settings for the Note3? - Galaxy Note 3 Q&A, Help & Troubleshooting

I like to keep the display on while plugged in to the charger, the Nexus and the S4 have a developer section to set the display to stay on while connected to charger. I've not found this section/option for the Note 3, does anyone know how to locate it?

cynindesign said:
I like to keep the display on while plugged in to the charger, the Nexus and the S4 have a developer section to set the display to stay on while connected to charger. I've not found this section/option for the Note 3, does anyone know how to locate it?
Click to expand...
Click to collapse
Click on your Settings, then General, then About device, then scroll down to Build Number and click on it about 8 times. The Developer options will now be available.

Thanks, that worked, Cyn

cynindesign said:
Thanks, that worked, Cyn
Click to expand...
Click to collapse
I'm glad I could help.

Related

which kernel?

Hi, i ahve a very specific requirment for my galaxy tab 2 7
the ability for it to turn on automatically when it detects charging (instead of going to the charging icon)
can anyone recommend a kernel that supports this?
None unless you build it yourself.
imnuts said:
None unless you build it yourself.
Click to expand...
Click to collapse
I'm afraid i wouldn't know where to even start. was just hoping something existed in the wild
thanks anyway

Nexus 4 USB-Debugging doesn't work

Hi Guys,
I used the new Nexus 4 Toolkit to unlock the bootloader.
As I unfortunately dont have 10 Posts, I cant ask in this thread, so I hope it's ok to ask here.
I installed the drivers with USB-Debugging (as before for my galaxy nexus) and unlocked the bootloader.
So far everything went normal and good!
Then I wanted to root the system. It was said that I've to enable USB-Debugging again and the system will reboot.
But then :
I tap on "Enable USB-Debugging" and I'm asked If im sure. After this, nothing happens. Usually I see a information-icon, that usb-debugging is enabled in the taskbar.
This icon is now missing. And im completly not able to connect to phone via PC and use ADB.
Im slightly desperated, as anything I could do requires ADB/USB-Debugging.
Can you guys help me?
Thanks in advance.
Does your phone show up as MTP storage OK?
I remember my One X decided to cease all USB activity except charging once, a reboot sorted it.
The USB debugging icon is a little jelly bean as per the attached screenshot.
thanks for your reply.
I dont remember If it was shown as MPT-Storage - will check this immediately after work
THe Jelly-Bean-Icon showed up before, when used the toolkit to unlock the bootloader.
I also rebooted the phone several times
Ok, now everything seems to be identified correctly, again. Very strange.
Maybe the PC needed to be restarted.
Sorry for this post. It can be closed.
Thank you!
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
ev!denz said:
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
Click to expand...
Click to collapse
I've got the same problem, except my device is not loading until 100%. It gets really hot while not doing anything and it's empty in about 3 hours.
I figured out that the Nexus is only charged via "USB" although it's plugged in the charger.
Now my device is charging up until 100% but it still gets hot, is empty in about 5 hours and if I connect it in fastboot mode my laptop says that the drivers are not installed properly even though I installed the naked drivers. Re-installing the drivers does not work either, it says that my laptop already had the right drivers installed. And when I connect my device when it's booted it is not recognized at all and does not show up in the device manager. I tried three other cables... Sounds like an USB brick, right?
Ultraschorsch said:
Sounds like an USB brick, right?
Click to expand...
Click to collapse
That's what I think, too.
ev!denz said:
That's what I think, too.
Click to expand...
Click to collapse
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
loopyoyo said:
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
Click to expand...
Click to collapse
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Ultraschorsch said:
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Click to expand...
Click to collapse
Tap Build Number in about phone 10 times.
zephiK said:
Tap Build Number in about phone 10 times.
Click to expand...
Click to collapse
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Ultraschorsch said:
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Click to expand...
Click to collapse
Yea...computer doesn't even recognize nexus under recovery or fastboot menus..I think it's really fooked up. Just submitted a rma request to lg so will see how this plays out.
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
I have teh same problem.
1) the battery drains like crazy, even with franco kernel lastest nightly
2) USB debugging does not work now... when plugging into the pc the phone is just not found...
3) I can reboot to recovery but that doesnt do me any good since I cant do jack from it.
anyone has any insight ? what can be going on that the phone is not showing up in windows
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
spaceman860 said:
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
Click to expand...
Click to collapse
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes. If your on stock with a locked bootloader your warranty is still good
Sent from my Nexus 4
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes, I called Google but they don't have any N4's in stock. so I keep rooted until I get a new device from them.

[Solved] MTP USB Configuration Problem w/ Win 7

Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
[Update] Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
Click to expand...
Click to collapse
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Tel864 said:
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Click to expand...
Click to collapse
This is really annoying. Is there anyway to change it defaulted to MTP?
myasus said:
This is really annoying. Is there anyway to change it defaulted to MTP?
Click to expand...
Click to collapse
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Tel864 said:
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Click to expand...
Click to collapse
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
Click to expand...
Click to collapse
OK, I didn't know you were rooted.
It is a new security feature of Android since lolipop. It is to prevent malware on your pc targeting android connected phones. So that if you were charging it couldn't switch to connect storage without explicit approval on the phone itself.

OK Google while AOD (Screen off)

Hi there,
Is there a workaround or a root function to enable Always On listening for 'OK Google' while the screen is off/AOD?
It is really bugging me but I cannot see a workaround already posted.
Thanks!
dancooper93 said:
Hi there,
Is there a workaround or a root function to enable Always On listening for 'OK Google' while the screen is off/AOD?
It is really bugging me but I cannot see a workaround already posted.
Thanks!
Click to expand...
Click to collapse
Can Tasker achieve something like this? I have only returned to Android after a 3 years break, any advice is much appreciated!
dancooper93 said:
Hi there,
Is there a workaround or a root function to enable Always On listening for 'OK Google' while the screen is off/AOD?
It is really bugging me but I cannot see a workaround already posted.
Thanks!
Click to expand...
Click to collapse
OMG. Just set up Google Assistant and enable Voice unlock. Just explore your phone.
srdjanLeo said:
OMG. Just set up Google Assistant and enable Voice unlock. Just explore your phone.
Click to expand...
Click to collapse
I have that setting enabled. It works on the lock screen where you can swipe to unlock, but not on the darker lock screen, where it shows the time and the outline of your notifications.
srdjanLeo said:
OMG. Just set up Google Assistant and enable Voice unlock. Just explore your phone.
Click to expand...
Click to collapse
I have enabled them options. It works on the light lockscreen, where you can scroll your notifications and have the 2 icons in the bottom corners.
It does not work on the darker lock screen, or the Always On Display screen, where it only shows the time and the outline of notifications you have.
dancooper93 said:
I have enabled them options. It works on the light lockscreen, where you can scroll your notifications and have the 2 icons in the bottom corners.
It does not work on the darker lock screen, or the Always On Display screen, where it only shows the time and the outline of notifications you have.
Click to expand...
Click to collapse
Works here as it should. With AOD and without. Are you rooted? If you are try other ROM. If you are not, try reflashing stock firmware with Odin or with Side Sync or whatever Samsung kies is now called.
srdjanLeo said:
Works here as it should. With AOD and without. Are you rooted? If you are try other ROM. If you are not, try reflashing stock firmware with Odin or with Side Sync or whatever Samsung kies is now called.
Click to expand...
Click to collapse
I am not rooted. I heard if you root you can only charge your battery to 0%?
Okay, I will have a look into reflashing if that'll fix it.
Are you rooted?
dancooper93 said:
I am not rooted. I heard if you root you can only charge your battery to 0%?
Okay, I will have a look into reflashing if that'll fix it.
Are you rooted?
Click to expand...
Click to collapse
Same for me Dan, works after you swipe but not from AOD, every tutorial I have seen says the same, has to be "open" before it will work.
Bixby will unlock from the AOD screen if you set that up, hope that helps
MilgeS said:
Same for me Dan, works after you swipe but not from AOD, every tutorial I have seen says the same, has to be "open" before it will work.
Bixby will unlock from the AOD screen if you set that up, hope that helps
Click to expand...
Click to collapse
What do you mean 'open'?
I have Bixby set up, which I just use to open Google now, not ideal, but it is a workaround nonetheless!
dancooper93 said:
I am not rooted. I heard if you root you can only charge your battery to 0%?
Okay, I will have a look into reflashing if that'll fix it.
Are you rooted?
Click to expand...
Click to collapse
I am rooted. With custom ROM, NOTE 8 Port.
Charging works as it should, OK Google trigger works as well. I really don't have any problem.
srdjanLeo said:
I am rooted. With custom ROM, NOTE 8 Port.
Charging works as it should, OK Google trigger works as well. I really don't have any problem.
Click to expand...
Click to collapse
It works for you because you are using a Note 8 ported ROM. Because Samsung enabled this feature on the Note 8. It will not currently work on the stock S8 ROM. Some people seem to be in a server side test to enable this feature though.
Okay, I see.
Does charging not stop at 80% for you because you are rooted?
artikle said:
It works for you because you are using a Note 8 ported ROM. Because Samsung enabled this feature on the Note 8. It will not currently work on the stock S8 ROM. Some people seem to be in a server side test to enable this feature though.
Click to expand...
Click to collapse
It was working for me on Bat Stock ROM and it is S8 ROM. I never used stock ROM so I can't say anything about that, I rooted my device and flashed custom ROM before even setting it up after unboxing.
srdjanLeo said:
It was working for me on Bat Stock ROM and it is S8 ROM. I never used stock ROM so I can't say anything about that, I rooted my device and flashed custom ROM before even setting it up after unboxing.
Click to expand...
Click to collapse
I forgot to quote you, sorry.
Question:
Does charging not stop at 80% for you because you are rooted?[
dancooper93 said:
I forgot to quote you, sorry.
Question:
Does charging not stop at 80% for you because you are rooted?[
Click to expand...
Click to collapse
It stops. But there is a workaround if you have Snapdragon version. Mine is Exynos so it is as Samsung set it up.
srdjanLeo said:
It stops. But there is a workaround if you have Snapdragon version. Mine is Exynos so it is as Samsung set it up.
Click to expand...
Click to collapse
I am now rooted
What Note 8 ROM did you use?
dancooper93 said:
What do you mean 'open'?
I have Bixby set up, which I just use to open Google now, not ideal, but it is a workaround nonetheless!
Click to expand...
Click to collapse
I meant "open" as in on lock screen re your above post, the screen after AOD, sorry for any confusion
Same here works after you swipe but not from AOD, every time tutorial I have seen says the same has to be "open" before it will work.
It's best to think of the always-on display as "Screen Off", which is why OK Google doesn't work on stock ROM. That's standard Android procedure to avoid draining the battery by always listening for voice commands.
At one point, Google Assistant was able to listen when the screen was off, so long as the phone was being charged. Unfortunately, that feature disappeared at some point in the past half year or so (which caused me some confusion when it stopped working and I could no longer find the toggle).
scatterthought said:
It's best to think of the always-on display as "Screen Off", which is why OK Google doesn't work on stock ROM. That's standard Android procedure to avoid draining the battery by always listening for voice commands.
At one point, Google Assistant was able to listen when the screen was off, so long as the phone was being charged. Unfortunately, that feature disappeared at some point in the past half year or so (which caused me some confusion when it stopped working and I could no longer find the toggle).
Click to expand...
Click to collapse
That's not true. It still works on a Google Pixel running stock Android with the screen off and not charging. You never had to have it plugged in or charging for that to work. Samsung is the ONLY Android phone I know of that OK Google doesn't work with the screen off.
Source: I've owned the Nexus 6, Nexus 5x, the Nexus 6P, the Pixel XL, a number of Galaxy phones, and a few Motorola's and a couple LGs.

Charging probelms (plus more) after Oreo update

I updated my S8 to Oreo a few weeks back (Samsung Experience 9.0) and ever since I have a plethora of problems.
The main one being that charging the device is now a battle...
I seem to have narrowed it down to using a fast charge power brick (2.0A)
I have tried the official Samsung unit and cable supplied with the phone, and good quality 3rd party cables and plugs....nothing works.
The device does not even register the cables existence.
BUT,
If I use a standard plug (< 2.0A), and a none Samsung cable it will charge
If I use a Samsung cable, it does not. Seemingly regardless of plug.
I've also noticed that the battery life has significantly reduced, come noon time, the deice is ready to be charged, showing less than 50% having been sat on my desk, with little to no use. (I only charge it at this point as I know it wont make it the rest of the day)
Some other issues I've noticed since the Oreo update...Wi-Fi seems choppy, slow and laggy, and I quite often get the " ! " next to the signal status bar icon.
And almost 100% of the time if I try to cast to one of my Chromecast or Google Home devices, the S8 does not see them (connected to same Wi-Fi SSID), meaning if I open Google Home app, and click top right to see my devices, they are....sometimes disabling and re-enabling Wi-Fi will fix this.
I spoke to what Samsung call their 'Tech Support' and it was beyond a joke...their solution...."Turn the phone off and on"...that was it, they could / would not offer any more support than this, and also claimed that I was the only 1 reporting this / these "potential issues"
I had another update pushed to my S8 yesterday (14.05.2018) which according to the docs was released 10.05.18 - G950FXXU1CRD7
This has not helped with anything....
Has anyone else had any of these or similar problems following Oreo update?
Does anyone know of any 'fix' if so?
TIA
While I can't help with most of the problems, see my post in another thread regarding wifi
https://forum.xda-developers.com/showpost.php?p=76518883&postcount=44
Titus_Andronicus said:
While I can't help with most of the problems, see my post in another thread regarding wifi
https://forum.xda-developers.com/showpost.php?p=76518883&postcount=44
Click to expand...
Click to collapse
Thanks for the link, but I've tried cache clears etc and nothing is helping, with any problems.
Last night, my S8 could not find my cast devices whilst my Android tablet could
Sent from my SM-G950F using Tapatalk
Little bump, anyone?
Sent from my SM-G950F using Tapatalk
Valiceemo said:
Little bump, anyone?
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
do you have this Laggy Navigation & Bar os at the same time Bar s8 oreo
MirceaForce said:
do you have this Laggy Navigation & Bar os at the same time Bar s8 oreo
Click to expand...
Click to collapse
Sorry, I'm not following?
I haven't noticed the OS itself being laggy, nor any problems with the nav bar.
Sent from my SM-G950F using Tapatalk
Valiceemo said:
Sorry, I'm not following?
I haven't noticed the OS itself being laggy, nor any problems with the nav bar.
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
yes it happen after one week of usage after 250 hours of usage
how much is your up time ?
MirceaForce said:
yes it happen after one week of usage after 250 hours of usage
how much is your up time ?
Click to expand...
Click to collapse
No sorry, not seen that.
I've not kept track of my device up time and/o/ usage hours.
I have my device set to auto reboot every Friday.
I guess all I can offer is to advise to use this feature in the settings...maybe open a separate thread of your own?
Valiceemo said:
No sorry, not seen that.
I've not kept track of my device up time and/o/ usage hours.
I have my device set to auto reboot every Friday.
I guess all I can offer is to advise to use this feature in the settings...maybe open a separate thread of your own?
Click to expand...
Click to collapse
stop restart it and you will see the difference
MirceaForce said:
stop restart it and you will see the difference
Click to expand...
Click to collapse
why would I intentionally try and create another problem for myself....
This is a little off-topic now so id ask you start your own thread please so we can get back to the OP topic.
Hopefully someone can help me.
So I have just discovered yet another problem.....
When I connect my S8 to my windows laptop I cannot transfer files...I get a pop up telling me its slow charging.
I've disabled USB debugging in dev. options, not fixed anything.
USB configuration is set to WTP in dev. options.
bump for help.....please!

Categories

Resources